Can't open print settings with CS5 and Epson R1900

In Photoshop CS5, go to File > Print. In the Print dialogue window, click on Print Settings... and no response. The blue Print button in the lower right corner flashes when I click, but nothing else happens.
I've tried running Photoshop in 32-bit mode as well. Doesn't behave differently.
Running on a Mac Pro 2.26 GHz (most current generation).
12 GB RAM
OS 10.6.4
Printer is connected to Airport Extreme USB (most current generation).
Can successfully print with CS4; seems to be a new issue with CS5.
Hope I've included enough info to troubleshoot this problem.
Thanks for any help!
Brian,.

I've been trying to trouble shoot this problem since the beginning of September. I wasn't sure if it was a snow leopard issue, a Driver issue, or a CS5 issue. I guess it's CS5. I recently discovered the work around of asking Photoshop to manage the colors, opening the print settings, saving, then returning to printer managing colors but this just doesn't cut it in our graphics lab. We need the settings to be as straight forward as possible for our students.
Also, unrelated sort of, Photoshop remembers the settings from the previous print job. Which again doesn't work well in a lab/public environment. So if jimmy printed 20 copies of a file and set it to print colors as gray; Susie, the next in line, would have the same print settings for her file. This seems to only happen with photoshop. Not Preview, not safari, nor any other program.
We're seriously considering moving back to CS4.
...at least that had contact sheets.

Similar Messages

Printing problems with CS5 and Epson Photo R2880 printer

I'm having problems getting good prints when using Photoshop CS5 with my Epson Photo R2880 printer, problems I never had with CS4. Here's the situation:
If I take a PSD file and print it using CS4, everything works out perfectly. But if I take that same PSD file and print it out using CS5, the print is now offset top to bottom, as well as left to right, along with a 1/8" black strip being printed down the right edge of the paper. As far as I can tell, everything is set the same.
I've compared all the print information found in the Print dialog summary box between CS4 and CS5 and everything appears to be the same. I've verified that I'm using the latest print driver with my printer, and I am. It's 8.27. I've verified that I've checked off the box to center the print to the paper, each time I've made a print. And in trying to figure out what's going on, I've discovered that this problem occurs with any paper size when using CS5, but not with CS4.
I'm stumped and frustrated and without any more ideas as to what I should do next, except to always print my projects using CS4. If anyone has an idea for me, please let me know! Thanks!
P.s. I'm new at using this forum, and though I thought I sent this out once already, I never saw it posted. If I'm in error and it's already out there, sorry for the mistake and posting it twice.

>"Unfortunately then I'd have to say all bets are off. The only true test is to print with the standard materials that Epson has designed their printer for. Only if that works well should you be trying third-party materials. For example, third-party inks in general are of poorer quality, are inconsistent, clog more, and in the long run, do not save you anywhere the amount of money they advertise over the genuine Epson products."
Getting very nice results with an R1800, Inkjetfly CIS, and Red River paper. The R1800 has never had Epson ink run through it and has no abnormal clogging problems. In fact, clogs are rare.
Getting near perfect matches to the monitor with both Colorvision and x-rite calibrating/profiling equipment. The printer stays on 24-7 so the only ink used, other than printing, is a periodic nozzle check. I am not alone in this, so blanket statements like the above are specious at best.
And no, I don't sell prints for big bux, so whether they are going to last a hundred years is not a concern. Besides, until someone is around long enough to verify those claims, the jury is out. I've got color prints from the wet days that are fading after 20+ years. Third party inks are not necessarily lower quality than OEM. One of the reasons for the development of high quality third party inks was the dissatisfaction of B&W and fine art printers with the OEM products.
Of course the cheap refilled/knockoff carts being hawked on ebay and the like are a different story.
MBP, OS 10.4.11, CS3 10.0.1, R1800 with latest driver

Prinitng issue with CS5 and Epson pro3800 printer

CS5 will not hold printer driver settings after leaving driver setup screen. Eg., after setting ICM and choosing Adobe RGB color space and icc profile from menu, when you click OK, Adobe screen reverts to Photoshop adjusts colors and not printer adjust colors as it should. If you change the setting manually, when you renetr driver setup, it now shows 'no color management and not ICM as it should. This does not occur with CS3 or 4. Any help is appreciated.

I don't have this problem but i can tell you printing out of CS5 is a mess nothing works the way it should....check out my forum i started... right now i just chucked cs5 and went back to cs3

Can you save print settings with a PDF?

I have an 8.5"x14" PDF. Is there anyway to save default print settings with this PDF so if a user opens it on their machine it defaults to printing to 8.5"x14" paper? Right now it always defaults to the standard 8.5"x11". I'm not sure this can be done because it seems like more of a specific users machine thing. I don't think you can save print settings with a PDF can you?
Thanks!

The "auto-formatting" of a hardcopy print format is generally the realm of the output device, in this case the printer. Printer software gereally includes an auto-format feature that selects the proper bin. For those who only have a "letter" tray, it usually asks to feed the right format manually, or switch trays. This is not a PDF feature but an output device feature.
Hope this helps.

HT1338 scanning with cs5 and epson 4870

i have photoshop CS5 and cannot scan with my epson 4870. i have downloaded the twain plugin but it is not compatable with pc.....i am assuming this is b/c of mountain lion...help!

I don't have this problem but i can tell you printing out of CS5 is a mess nothing works the way it should....check out my forum i started... right now i just chucked cs5 and went back to cs3

Can't open Print Settings dialog

All of the sudden I cannot open the print settings dialog from the print window in Aperture. Every time I click the button, I get this in console:
3/22/08 3:16:22 PM Aperture[574] * Assertion failure in -[RedRock _commonBeginModalSessionForWindow:relativeToWindow:modalDelegate:didEndSelector :contextInfo:], /SourceCache/AppKit/AppKit-949.27/AppKit.subproj/NSApplication.m:2998
3/22/08 3:16:22 PM Aperture[574] Main Thread Exception in Aperture: Modal session requires modal window
Backtrace:
0x0007043d (in Aperture)
0x93fa7eb7: +[NSException exceptionWithName:reason:userInfo:] (in CoreFoundation)
0x93fa8023: +[NSException raise:format:arguments:] (in CoreFoundation)
0x94d95044: -[NSAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] (in Foundation)
0x9149fe20: -[NSApplication _commonBeginModalSessionForWindow:relativeToWindow:modalDelegate:didEndSelector :contextInfo:] (in AppKit)
0x009609ec (in ProKit)
0x00362b6d (in Aperture)
0x000a08c4 (in Aperture)
0x91471e56: -[NSApplication sendAction:to:from:] (in AppKit)
0x0096022d (in ProKit)
0x003627ee (in Aperture)
0x91471d94: -[NSControl sendAction:to:] (in AppKit)
0x91471c1a: -[NSCell _sendActionFrom:] (in AppKit)
0x91471273: -[NSCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
0x91470ac6: -[NSButtonCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
0x0099cd07 (in ProKit)
0x91470380: -[NSControl mouseDown:] (in AppKit)
0x9146eac3: -[NSWindow sendEvent:] (in AppKit)
0x00982c3e (in ProKit)
0x9143b714: -[NSApplication sendEvent:] (in AppKit)
0x0036a608 (in Aperture)
0x915dcf43: -[NSApplication _realDoModalLoop:peek:] (in AppKit)
0x915d7657: -[NSApplication runModalForWindow:] (in AppKit)
0x001bc7bc (in Aperture)
0x0009ec21 (in Aperture)
0x001288e4 (in Aperture)
0x91471e56: -[NSApplication sendAction:to:from:] (in AppKit)
0x0096022d (in ProKit)
0x003627ee (in Aperture)
0x91471d94: -[NSControl sendAction:to:] (in AppKit)
0x91471c1a: -[NSCell _sendActionFrom:] (in AppKit)
0x91471273: -[NSCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
0x91470ac6: -[NSButtonCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
0x0099cd07 (in ProKit)
0x91470380: -[NSControl mouseDown:] (in AppKit)
0x9146eac3: -[NSWindow sendEvent:] (in AppKit)
0x00983eba (in ProKit)
0x9143b714: -[NSApplication sendEvent:] (in AppKit)
0x0036a608 (in Aperture)
0x913990f9: -[NSApplication run] (in AppKit)
0x00960e5a (in ProKit)
0x00003872 (in Aperture)
anybody else with this problem?
(could this be related to this??? http://discussions.apple.com/thread.jspa?messageID=6559834&#6559834)

Nothing new to add other than I am getting the identical behavior. The output on my console appears to match to OP's. Any help would be appreciated. This is on Aperture 2.0.1 with all the security and other updates applied.
3/24/08 10:00:58 AM Aperture[29084] * Assertion failure in -[RedRock _commonBeginModalSessionForWindow:relativeToWindow:modalDelegate:didEndSelector :contextInfo:], /SourceCache/AppKit/AppKit-949.27/AppKit.subproj/NSApplication.m:2998
3/24/08 10:00:58 AM Aperture[29084] Main Thread Exception in Aperture: Modal session requires modal window
Backtrace:
0x0007043d (in Aperture)
0x912e1eb7: +[NSException exceptionWithName:reason:userInfo:] (in CoreFoundation)
0x912e2023: +[NSException raise:format:arguments:] (in CoreFoundation)
0x965f6044: -[NSAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] (in Foundation)
0x9337ee20: -[NSApplication _commonBeginModalSessionForWindow:relativeToWindow:modalDelegate:didEndSelector :contextInfo:] (in AppKit)
0x009609ec (in ProKit)
0x00362b6d (in Aperture)
0x000a08c4 (in Aperture)
0x93350e56: -[NSApplication sendAction:to:from:] (in AppKit)
0x0096022d (in ProKit)
0x003627ee (in Aperture)
0x93350d94: -[NSControl sendAction:to:] (in AppKit)
0x93350c1a: -[NSCell _sendActionFrom:] (in AppKit)
0x93350273: -[NSCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
0x9334fac6: -[NSButtonCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
0x0099cd07 (in ProKit)
0x9334f380: -[NSControl mouseDown:] (in AppKit)
0x9334dac3: -[NSWindow sendEvent:] (in AppKit)
0x00982c3e (in ProKit)
0x9331a714: -[NSApplication sendEvent:] (in AppKit)
0x0036a608 (in Aperture)
0x934bbf43: -[NSApplication _realDoModalLoop:peek:] (in AppKit)
0x934b6657: -[NSApplication runModalForWindow:] (in AppKit)
0x001bc7bc (in Aperture)
0x0009e8c1 (in Aperture)
0x0004415f (in Aperture)
0x93350e56: -[NSApplication sendAction:to:from:] (in AppKit)
0x0096022d (in ProKit)
0x003627ee (in Aperture)
0x933ff7cc: -[NSMenu performActionForItemAtIndex:] (in AppKit)
0x933ff4d1: -[NSCarbonMenuImpl performActionWithHighlightingForItemAtIndex:] (in AppKit)
0x933dc3ae: AppKitMenuEventHandler (in AppKit)
0x90ef4fc3: DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) (in HIToolbox)
0x90ef43fd: SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) (in HIToolbox)
0x90f10e0e: SendEventToEventTarget (in HIToolbox)
0x90f4586d: SendHICommandEvent(unsigned long, HICommand const*, unsigned long, unsigned long, unsigned char, OpaqueEventTargetRef*, OpaqueEventTargetRef*, OpaqueEventRef**) (in HIToolbox)
0x90f6bfbf: SendMenuCommandWithContextAndModifiers (in HIToolbox)
0x90f6bf7c: SendMenuItemSelectedEvent (in HIToolbox)
0x90f6be7e: FinishMenuSelection(MenuData*, MenuData*, MenuResult*, MenuResult*, unsigned long, unsigned long, unsigned long, unsigned char) (in HIToolbox)
0x90f48b1e: MenuSelectCore(MenuData*, Point, double, unsigned long, OpaqueMenuRef**, unsigned short*) (in HIToolbox)
0x90f48509: _HandleMenuSelection2 (in HIToolbox)
0x90f4837d: _HandleMenuSelection (in HIToolbox)
0x93318f77: _NSHandleCarbonMenuEvent (in AppKit)
0x9327fc72: _DPSNextEvent (in AppKit)
0x9327f08e: -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] (in AppKit)
0x0036228e (in Aperture)
0x932780c5: -[NSApplication run] (in AppKit)
0x00960e5a (in ProKit)
0x00003872 (in Aperture)
0x00003799 (in Aperture)

Print quality with Aperture and Epson RX580

Hi all,
I feel like I've tried everything, but I just can't get Aperture (the latest version with all the updates) to print from my MacBook Pro on my Epson photo printer the way I could from other photo software on my old PCs. On my old PCs, when I would print a photo from Canon DPP or Capture One, or even the Windows photo management software, I get a rich menu of dialogue boxes for the Epson printer offering different qualities of prints, different papers to choose from, "photo enhancement," and lots of other options. Prints came out sharp, colorful, and just great.
When I print from Aperture, I get none of these options (I get color management and resolution, and that's about it).
When I print from Aperture, I get vertical lines in the prints, visible dots, and pixellation. So what I do is email the "exported" versions to my daughter's PC laptop and print from there -- and get good results. Boy, that's a pain.
Surely Aperture can do better than this. So what am I missing? Any ideas for what I should be doing?
Thank you.

Canon MP990 and Macbook pro (os X snow lep.. and Lion) - Lines in prints in Aperture.
While a bit vague I got there and found the distinction between the printer driver managing it and the printer managing the photo quality causing the issues.
I could only transfer the pic's to iphoto and print for ( admitedly about the same time of more than a year).
The FIX
in the first window after selecting print scroll down to rendering and select printer managed.
Select all the other settings you need then select print on the right bottom of this window.
This next dialogue box at the bottom is a show details button then a new set of menus are present (initial is layout in a pull down menu) select color matching then automatic ( you can change this but it worked so if it is not broken I'll play later ).
You should have clear prints with no lines...

Printing Problems with CS3 and Epson R1800

Recently upgraded to CS3 and have now lost most printing options for Epson Stylus Photo R1800. Had no problems with CS2 running in Leopard. Anyone know what has happened?

>"Unfortunately then I'd have to say all bets are off. The only true test is to print with the standard materials that Epson has designed their printer for. Only if that works well should you be trying third-party materials. For example, third-party inks in general are of poorer quality, are inconsistent, clog more, and in the long run, do not save you anywhere the amount of money they advertise over the genuine Epson products."
Getting very nice results with an R1800, Inkjetfly CIS, and Red River paper. The R1800 has never had Epson ink run through it and has no abnormal clogging problems. In fact, clogs are rare.
Getting near perfect matches to the monitor with both Colorvision and x-rite calibrating/profiling equipment. The printer stays on 24-7 so the only ink used, other than printing, is a periodic nozzle check. I am not alone in this, so blanket statements like the above are specious at best.
And no, I don't sell prints for big bux, so whether they are going to last a hundred years is not a concern. Besides, until someone is around long enough to verify those claims, the jury is out. I've got color prints from the wet days that are fading after 20+ years. Third party inks are not necessarily lower quality than OEM. One of the reasons for the development of high quality third party inks was the dissatisfaction of B&W and fine art printers with the OEM products.
Of course the cheap refilled/knockoff carts being hawked on ebay and the like are a different story.
MBP, OS 10.4.11, CS3 10.0.1, R1800 with latest driver

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.

It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help...............

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don't know how indesign can do this action.

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don’t know how indesign can do this action.

set the wake-on lan on the main computer
The laptop's too far away from the router to be connected by ethernet. It's all wifi.
No separate server app on the laptop, it's all samba
The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
Last edited by saft (2010-03-18 20:38:08)

Can I set up multiple usb hard drives- one for time machine and a second for media? Can one also print wirelessly with an old HP C6280 printer?

Can I set up multiple usb hard drives- one for time machine and a second for media?
Can one also print wirelessly with an old HP C6280 printer?

Can I set up multiple usb hard drives- one for time machine and a second for media?
Yes.
Can one also print wirelessly with an old HP C6280 printer?
Possibly by using an Airport Express, but depends on what type of port connection the printer requires.

When I open the settings and messages of the iPhone 4s I get stuck in a white screen, what should I do? the keyboard to open there is minute, I can not open the settings in any way.

when I open the settings and messages of the iPhone 4s I get stuck in a white screen, what should I do? the keyboard to open there is minute, I can not open the settings in any way.

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray BEFORE doing the reset.

Why i can't open my hotmail with iphone but safari and laptop can open

Why i can't open my hotmail with iphone but safari and laptop can open why???

The Hotmail server has an outrage. Try again later.

I can't open NEF files with PS Elements9 (Mac) and have just performed all avail. updates

I can't open NEF files with PS Elements9 (Mac) and have just performed all avail. updates. What to do?

Many thanks!!! This works and is probably the best fix for now. Thank you!!!
Date: Wed, 30 Jan 2013 10:58:01 -0800
From: [email protected]
To: [email protected]
Subject: I can't open NEF files with PS Elements9 (Mac) and have just performed all avail. updates
    Re: I can't open NEF files with PS Elements9 (Mac) and have just performed all avail. updates
    created by 99jon in Photoshop Elements - View the full discussion
For the D600 NEF's you have two alternatives: (1) Upgrade to PSE 11. (2) Download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software) Windows download click here DNG Converter 7.3 Mac download click here DNG Converter 7.3 You can convert a whole folder of raw images in one click. See this quick video tutorial: You Tube click here for DNG Converter tutorial
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5034913#5034913
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5034913#5034913
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5034913#5034913. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Hi..i have a problem with adobe muse..i can t open it.i double click and is not opening..help please

hello!!i have a problem with adobe muse..i can t open it.i double click and is not opening..i don t think it s a problem from computer because adobe is the only i can t open ..a few hours ago i could open,and now i can t anymore..please help

Can you open the application from programs list ?
Also, please verify if the application is installed correctly and if not then probably a re-installation would be required.
For Immediate support its always recommended to join our Live chat team.
Thanks,
Sanjit

Can't open print settings with CS5 and Epson R1900

Similar Messages

Maybe you are looking for