Can't open Project Professional 2013 projects in SharePoint 2013

I can't open Project 2013 documents from SharePoint2013.
My environment is:
Project Professional 2013 32 bit
Office Professional 2013 32 bit
IE 9 32 bit
Windows 7 Enterprise 64 bit
All other documents (Word, Excel) can be checked out and edited from SharePoint.
When I check out and edit a Project document I get the following error:
Project cannot open the file.
check that the file name a path are correct.
check that the file format is recognized by Project.
Also, I get the same error when trying to open a project document from a mapped SharePoint drive.
Note: This was working on a fresh install of Office 2013 and Project Professional 2013 UNTIL a windows update (Office 2013 SP 1 and other updates)
Am I missing an update?
Thanks!
Ken

Hi Ken,
I would try first to repair MS Project from the control panel to see if it fixes your issue.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Similar Messages

Can't open MS Word .doc files from SharePoint 2013 document library?

Hello,
I have uploaded some MS Word files with .doc extension into a SharePoint 2013 document library, but they don't open when clicked. I can do a number of things to the file, like view and edit properties, download and other things, but it does not
open up when mouse clicked. There are PDF files in the document library and they open up just fine. Any ideas?
I should add that MS Word 2010 .docx files can not be opened either.
Thanks.
Paul

Hi,
Whether you use office 2013.
Considering this .doc file can be smoothly opened in Office if you downloaded it to your local, it indicates that the Word document and Microsoft Word doesn’t have any problems. The issue may be caused by the compatibility between Office
and your site.
1.Check whether you have the SharePoint OpenDocuments Class add on enabled at first.
Internet Explorer >Tools iron > Manage add-ons >
Choose to Show All add-ons. Find SharePoint OpenDocuments Class and make sure it’s enabled.
2.go to Compatibility view settings > add your SharePoint site to compatibility view
3.go to Internet Options,
Advanced > Reset… > Check Delete personal settings and reset
Security > Trusted sites > sites > add SharePoint sites to trusted sites
4.If it doesn’t work, please open Word, go to Options > Trust Center > Trust Center Settings > Protected View > Uncheck all.
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

HT5103 How can I open Final Cut Express project in Final Cut Pro X?

How can I open Final Cut Express project in Final Cut Pro X?

If you export the project from FCE you can import the QuickTime into FCP. You can do limited work to it like adding titles.

Can't open mail "icon" in control panel office 2013 windows 8.1 (fully patched)

I can't open mail "icon" in control panel office 2013 Home and business & windows 8.1 (fully patched), nothing happens just a short slowdown then this error.
Have **replicated** the error on **three different PC's** including 2 x fresh install VM's using 2 x different install CD's
I have also deleted the mail profile and try again and try to repair office. Have also tried Try to run the command "Control mlcfg32.cpl" and "Control
mlcfg64.cpl" this does nothing
win 8.1 64bit office 32 bit (have tried both 32 and 64)
This is the event log error
Faulting application name: rundll32.exe, version: 6.3.9600.16384, time stamp: 0x52158827
Faulting module name: KERNELBASE.dll, version: 6.3.9600.16496, time stamp: 0x52b3e015
Exception code: 0xc06d007e
Fault offset: 0x00012eec
Faulting process id: 0xc6c
Faulting application start time: 0x01cf3de09eb3ddf7
Faulting application path: C:\Windows\SysWOW64\rundll32.exe
Faulting module path: C:\Windows\SYSTEM32\KERNELBASE.dll
Report Id: e0176a9d-a9d3-11e3-8250-00155d003a04
Faulting package full name:
Faulting package-relative application ID:
Thanks in advance

Hi,
I check this issue in my environment, but cannot repro this issue.
Please check the following path to click the right cpl file:
C:\Program Files (x86)\Microsoft Office\Office15\MLCFG32.CPL
If that works, you need check this registry path to see if it points a right path to the .cpl file:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Control Panel\Cpls
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support

Can't see 'Upload Multiple Document' option in sharepoint 2013

After upgrading Sharepoint 2010 to 2013, i can't see 'Upload Multiple Document' option under files tab. I have downloaded and place the file 'STSUPLD.DLL' into Office14 and Office15 folder but IE is not asking me to run any microsoft ActiveX control as mentioned here
http://thuansoldier.net/?p=2289
I am using Office 2010 with IE9 (32 bit) .
Am i missing anything ?

Hi,
According to your post, my understanding is that you could not see the “Upload Multiple Document” option in SharePoint 2013.
In SharePoint 2013 the “Upload Multiple” Options has been depreciated. As we all known, there are two alternative ways to Upload multiple documents:option
1 - Using the drag-and-drop functionality, option 2 - Windows Explorer view.
You can upgrade your IE from IE9 to IE10 then check whether it works.
You can also use the Windows Explorer view to upload multiple documents.
You will probably get the following error.
To resolve this add the SharePoint site as Trusted in your Browser and Make sure that the WebClient service is running. To do this, follow these steps:
Click Start, click Run, type services.msc, and then press Enter.
In the list of services, locate the WebClient service, and then make sure that its status in the Status column is set to Started. If its status is not set to Started, double-click WebClient, click Start, and then click OK.
Once done restart the browser and try opening the Windows Explorer again. In the Windows Explorer you can copy and paste Multiple documents as done in earlier SharePoint versions.
For more information:
http://www.learningsharepoint.com/2012/11/29/how-to-upload-multiple-documents-in-sharepoint-2013/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Can i use Report viewer web part in SharePoint 2013 app to show SSRS reports?

Can i use Report viewer web part in SharePoint 2013 app to show SSRS reports?

SharePoint app you mean a simple sharePoint 2013 application like site, team site etc, or do you mean an App (the new feature like webPart).
To add a SSRS Report viewver web part follow these steps
1. Edit the page
2. Choose insert a webpart
3.Select SQL server Reporting -> SQL Server Reporting Services Report Viewer webpart
4. Configure the webpart to show your .rdl files.
(See the img below. Plz mark as answered if it helps).

Help. I can't open any of my project files,"Project file version not recognized". Whats going on?

After uninstalling and reinstalling Prelude CC none of my project files will open.
I get the notice "This version of the project file is not recognized!"
I have no idea how to troubleshoot this. Any help would be greatly appreciated.

So after 3 hours of painful chat, Adobe Finally gave me the solution. They wouldn't answer my question without trying a bunch of things that I had said I already did, so hopefully this helps some people.
Somehow, updating was disabled, or suppressed, my the administrator (that's me). Adobe kind of forgot to give the administrator a way to then reenable that for users. You'd think that would be something the administrator would control from the admin console online, but no. You set it up once on install, then everyone is just stuck with whatever version they installed at the time. But good news! There's a file that suppresses that. You Might be able to simply delete it. I'm not sure.
But if you need to fix it, here it is. All 2 minutes that it will take you. Do NOT contact Adobe. Their help system is incredibly inefficient (but then again, aren't most?):
go here: C:\Program Files (x86)\Common Files\Adobe\AAMUpdaterInventory\1.0
see an adobeUpdateradminprefs.dat file? Open that in notepad (or notepad++ or equivelant if you like that better)
Change the 1 to a zero and save.
That's all. That Should have been a known item, and would take all of 10 seconds to check, but I had to uninstall and reinstall several things before we went to a folder. Because uninstalling reinstalling is easier? ha
Now in response to Ramesh:
1. the issue is moot because previous versions of prelude can not open future versions. That's all over the web. So just make sure you have the current version.
2. we are now both at the current version.
3. offline media? we hadn't figured that out. If she closes the file and opens it again it seems to go away. So that's an unknown. And it's working now, so I don't really care.

Can't open any of my projects: Fehler beim Aktualisieren der Medien

Hi there, Im speechless.
I wanted to open one of my DVD-Studio projects and can't open any of them. The project loads and before the progress-bar reaches the end, it stalls at the point "Verknüpfungen aktualisieren" (sth. like "refreshing links"). After hitting "Cancel" and trying to open a new project, at the same point a bundle of windows appear, all saying sth. like that:
Fehler beim Aktualisieren der Medien
/Volumes/Video/Showreel/DVD-Studio Pro Dateien/Medien/Standardversion/Sequenz 1-MPEG 2; GOP 6.m2v“ verwendet nicht mehr das unterstützte Grafikformat. Aktualisieren Sie die Medien auf ein unterstütztes Format, bevor Sie sie in diesem Projekt verwenden.
Means sth. like: "The mentioned file doesn't have the supported graphic-format anymore. You have to take a supported format."
I don't know what to do. I did not change any file in the projects. The only thing I changed was to intsall the Pro-Aplication update. Is it possible to uninstall this?
VERY annoying. Any suggestions?

Thanks for your reply and your link. I did a clean uninstall and reinstalled DVDSP, but it's just the same. There are about 10-20 windows popping up (depending on the project I try to open), mentioning different files, which are not in the right format anymore.
I invested plenty of time in different showreels - I can't open one of them anymore.
I don't know what to do. ANY help?!
Best regards,
Frank

I can't open my Blu Ray project

When I try to open my BluRay project I get these two error messages
http://www.coyopa.com/data/web/encore_error_01.jpg
http://www.coyopa.com/data/web/encore_error_02.jpg
I've read that redoing the project might be necessary which is completely out of the question since this disk has to go out today.
Suggestions?

Not sure this will make a difference, but give it a go.
1. Try trashing the preferences.
2. Making sure FCPX is closed, move the project from the projects folder in finder, restart FCPX and while it's still running, try dragging the project back to the projects folder.
Like I said not sure it will make any difference, but worth trying anything at times lime this.

S.O.S. PLEASE!!!! I can't open my FCP X project after done a force quit!

I've been working for 10 days in a project I must deliver tomorrow to a broadcast TV and I had to force quit the FCP X.
Then...now, when I tried to open my project it simply the program doesn't open,
When I remove this project from the FCPro project's folder the final cut opens well...but when I put the project back into the projects folder FCPro X doesn't open
I need heplp!!!!

Not sure this will make a difference, but give it a go.
1. Try trashing the preferences.
2. Making sure FCPX is closed, move the project from the projects folder in finder, restart FCPX and while it's still running, try dragging the project back to the projects folder.
Like I said not sure it will make any difference, but worth trying anything at times lime this.

Error while installing MS Project Server 2013(trial) on Sharepoint 2013(CAL)

My problem is that I get the following error:
trial editions and licensed editions of SharePoint, Project Server, and Office Web Apps products may not be installed on the same server
when I try to install MS Project Server 2013(180 days-evaluation) over a Sharepoint 2013(MAPS license).
What does exactly this error say?
Do I need to have Sharepoint and MS Project Server with same type of license?
If so, I suppose I'll have to remove Sharepoint(MAPS) and install a 180 days-evaluation Sharepoint. Will this re-installation be acceptable or I'll get some license type incompatibility issues?

Hello. You are correct, you will need to have the same license types either both trials or both licensed. Uninstalling/ reinstalling with trials should work fine or build another trial farm. Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads

How to open and read Excel Sheet from SharePoint 2013 Document Library using C# Visual Studio 2012

Hi,
To achieve these are the steps that I had followed :
1. Add the document Library path into Central Admin -> Application Mgmt -> Manage Service App -> Excel Service App -> Trusted File Locations
2. Add Documnet Library link to Trusted Connection Proivder
3. Open Visual Studio as Run as Administrator
4.Create an SharePoint 2013 Empty Project.
5.Add Service Reference : http:\\<server>\_vti_bin/excelservice.asmx
6.Service added successfully
7.Create a class file and add the Service Reference namespace
There is no such class as ExcelService to call.
Please let me know if somebody knows how to open the Excel file into C#(2012) either using ExcelService or any other way to open. I tried old methods of Sharepoint 2010 server but it's not able to access classes.
Requirement is :
Need to read the excel sheet from Document Library and transfer all data into DataTable.
Please help asap.

Hi,
This is the forum to discuss questions and feedback for Microsoft Office, I'll move your question to the SharePoint 2013 development forum
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/home?forum=sharepointdevelopment
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support

Open Documents with Office Web App - SharePoint 2013

We have configured Office Web App for our SharePoint 2013 Farm and in Site settings, Site Collection Features, have disabled "Open Documents in Client Applications by Default" . Out of 15 sites, all documents in 13 sites open in Office
Web App. One of the 2 sites where the document still open using Client Application is a Wiki site.
Advanced propertied for the libraries settings has been set to "Use the server default (Open in the browser)". Anything else to check to open documents in Office Web App?
Thanks
MP

Hi,
As I understand, you encountered the issue when you want to open documents with Office Web App.
Check things below:
1. In the library setting->advanced setting, you can choose the open in the browser to see if the same situation will occur.
2. Check if you have not enable the Open Documents in Client Applications by Default feature.
If you choose Activate to enable the Open in Client feature (documents will open in the client application), or
Deactivate to disable the Open in Client feature (documents will open in the browser).
You can go to Site setting->site collection administration->site collection feature->Open
Documents in Client Applications by Default to set the feature.
The article below is about how to set the default open behavior for browser-enabled documents.
https://technet.microsoft.com/en-us/library/ee837425(v=office.15).aspx
The article below is about how to configure office web apps for SharePoint 2013.
Configure Office Web Apps for SharePoint 2013
Best regards
Sara Fan
TechNet Community Support

Can Adobe XI Pro Portfolios be posted to SharePoint 2013?

I'd like to post a Portfolio file to SharePoint 2013 and allow users to view it within the browser (using IE 11). Currently, I can post the file to SharePoint but must download it before viewing it. When I try to view it within the browser, I receive a message in place of the file that states "For best experience, open this PDF portfolio in Acrobat X or Adobe Reader X, or later" (despite having Acrobat Pro XI installed on my machine). Is there a workaround which lets me view the file in the browser?

Not really. PDF Portfolios are not set for "Fast Web View".

How can i deploy sandboxed solution .wsp file to sharepoint 2013 online using powershell script?

Is there any way to deploy the Sandbox solution .wsp file to sharepoint 2013 online publishing site using powershell or CSOM or any other way?

Hi,
According to your post, my understanding is that you wanted to deploy sandboxed solution .wsp file to sharepoint 2013 online.
"Add-SPSolution" command is not available in SharePoint Online management shell. So, we cannot use PowerShell to update and deploy a solution in SharePoint Online environment. Meanwhile, here is index of Windows PowerShell for SharePoint Online
cmdlets for your reference:
http://technet.microsoft.com/en-us/library/fp161364.aspx
You can CSOM to deploy solution using helper class from CodePlex. The activation code is as follows: SandboxSolutions.ActivateSolution(siteCollectionURl, cookies, "solution_name.wsp");
About the Client Side Object Model (CSOM), it is a development related issue, we have a specific support channel for the SharePoint developers, so I recommend you go to our MSDN forum for further assistance.
Here is a similar thread for you to take a look at:
http://community.office365.com/en-us/forums/156/t/197404.aspx
In addition, if you would like to upload and activate sandbox solution manually, you can refer to:
http://community.office365.com/en-us/forums/154/p/64010/244496.aspx#244496
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Will Office Web Apps Server 2013 work with SharePoint 2013 sites hosted in SP2010 compatibility mode?

We are planning a upgrade of a SP2010 farm to 2013. There has been a bit of customization so we wish to run the old sites on the new SP2013 platform in SP2010 compatibility mode.
So my question is will Office Web Apps Server 2013 work with the old sites hosted in compatibility mode?
I found a similar query from March 2014 found here
http://sharepoint.stackexchange.com/questions/93101/office-web-apps-2010-running-on-sharepoint-2013-for-compatibility-mode-sites/116281#116281
Has there been an update released to resolve this
Cheers D

Hi ,
According to your description, my understanding is that you need to know whether Office Web Apps 2013 is working with SharePoint 2013 sites which is in SharePoint 2010 compatibility mode.
For my test, Office Web Apps 2013 with SharePoint 2013 sites which is in SharePoint 2010 compatibility mode is working fine.
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

Can't open Project Professional 2013 projects in SharePoint 2013

Similar Messages

Maybe you are looking for