Can't open projects after re-installing Premiere Pro 1.5

So, right in the middle of some projects, my hard drive decides to crash. I had to replace the hard drive but the computer guy was able to save all my projects, plus I had back ups on an external. Now that I have my computer back and my Premiere Pro 1.5 is back up and running I was hoping I could continue where I left off. When I go into any of my projects I can see the edits, transitions, music files etc. but everything is that red "Media Offline" box. Is there a way to NOT have to start all over from scratch? Any help is greatly, GREATLY appreciated.
Thanks!

Your welcome.
And thank you for doing the necessary 'digging', rather than just waiting for someone here to spell it out for you.

Similar Messages

Can't open project after upgrade

Hi
After upgrading from iMovie 9 to iMovie 11, i have a project that i can't open any more. When i choose it in the project library the preview window freezes and the "edit project" button fades out so that I can't open it.
Any one else got the same problem or know how to fix it.

Hi I have the same problem. Did you manage to find a solution?
Thanks

Can't burn project to DVD from Premiere Pro CS5.5

Hello to all the experts out there!
We have been having ongoing issues attempting to burn our finalised project in Premiere Pro CS5.5.
We have tried many of the suggestions found in the forum, including changing file names, checking for gaps in the timeline, changing DVD discs, exporting as an MPEG file (always says unknown error), sending to Encore via Dynamic Link (goes 3/4 way through transcoding and freezes every time), installing Roxio updates etc etc.
We still can't get the project to burn to disc and I am not sure where to go with it next.
Its a 34 minute project, and have been able to export up to 24 mins of it, so I suspect there is a problem with something in the end of the timeline but just can't work it out.
Does anyone have any tips, pleaseeeee!???
Cheers,
Georgi

>and .jpg files
Photo Scaling for Video http://forums.adobe.com/thread/450798
-Too Large May = Crash http://forums.adobe.com/thread/879967
As well as the below, right click the Encore icon and select Run as Administrator, which is NOT the same thing as running the computer with the Administrator account, and which fixes several "odd" problems... To create a two layer DVD (or a BluRay?), you MUST have Encore set to use the Run as Administrator option
Run as Administrator http://forums.adobe.com/thread/771202
Odd Errors http://forums.adobe.com/thread/670174
Long File Names or odd characters cause problems
Read http://forums.adobe.com/thread/588273
And #4 http://forums.adobe.com/thread/666558
And This Message Thread http://forums.adobe.com/thread/665641
CS3 (maybe later?) Two Layer Problem http://kb2.adobe.com/cps/407/kb407236.html
Encore "No Drive" Error http://forums.adobe.com/thread/569230
Things and Software to AVOID when authoring/burning a DVD
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
Create an ISO (Encore) or folder on your hard drive (Encore or Premiere Elements) and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc (send the author a PayPal donation if you like his program)

Can't open CS 5.0.4 Premiere Pro because of bin-file error.

I'm on an:
iMac
OS X 10.6.8
12 GB RAM
3.06GHz
I've had trouble with CS5 so i upgraded to CS5.0.4 PP and I cant open my project. It's a large project, over an hour long movie. I've spent over 7 grand of my own cash on it and a year of my life. This means the world to me to fix.
whenever I open Premeire it says :
Reverb
Can not open bin-file.
i understand that is an audio plug in error and i've been searching for it 10 hours. I know if i find it, remove it from the folder, it will open with all my reverbed audio gone. I'm fine with that, I can not for the life of me figure it out.
I'm begging for help.
Thanks,
Brett.

You didn't say if you were trying to load the Organizer or the Editor.
If its the Organizer, here are some troubleshooting tips: http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Troubleshooting_Organiz er_crashes
If its the Editor, here are some troubleshooting tips: http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Troubleshooting_Editor_ crashes

Can't open files after clean install

Hi, I just had to wipe my drive clean and do a full fresh install of OSX 10.2.8...
... and now many of my Appleworks files aren't opening up. When I click on them I get a "No Bluetooth Hardware Found" error message, and bluetooth opens up on my dock.
I'm using Appleworks 6.2.9 for OSX, and then went back and installed a Classic Appleworks 6.0.4.
The problem is mostly on older documents created prior to v.6, but it also seems to be happening with newer documents created using v. 6 in OSX too.
Using the file -> open --> and selecting the document doesn't always solver the problem , and having to go into the application to open the files is far from convenient anyway.
If anyone can be of help it would be greatly appreciated!

In addition to deleting the AppleWorks preferences, use Disk Utility to repair permissions after any system update/upgrade/reinstall.
A couple of other things to try after that if it still doesn't work as it should.
See my user tip, AppleWorks 6 won't open my AW 5 files, to "tell" AppleWorks these files are AW files.
Highlight a known AppleWorks document in the Finder, highlight it & choose Get Info from the File menu. In the Get Info box, click the triangle next to "Open With." Click on this drop-down menu & choose AppleWorks. If AppleWorks is not a choice, choose "Other" & navigate to the AppleWorks application. Now click the "Change" button under the text that asks if you want to open all documents like this with AppleWorks.
Peggy

CAN'T OPEN PROJECT after updating software

Hallo,
Today I downloaded Pro Applicatios Update 2008-01. Than I opened my FCP project, but Final cut asked me if I want to update my project from earlier version. I confirmed, but reading project stopped and FC 6.0.3 failed. I hve tried to open older versions of this project but they've failed too. But another project works. The only difference between this and the other project is, that I use multicam in it.
I've alo trashed FC preferences, but it didn't help.
Can you advice please? Thank you.
JB

Select the files in the browser and use the File>Reconnect function. You'll get a list of clips the application is looking for. Navigating to where the first media file is and select it.

Can not open project after saving

I have created a project, worked on many times and saved .
Now when I try to open it I get error message that project has been
damaged. What can I do to save?
Paul

Hi Paul
Not good news I am afraid. There have been a number of posts
in this forum regarding this problem, with the net result of "sorry
mate, but broken is broken". As a general guideline, one of the
major causes seems to be when running on a network drive and the
advice is to work on a local drive rather.
Once again sorry mate.
Andrew

Can't open project after saving.

I'm using CS4 on Mac. When I try to open a saved project, I get this message:
The project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type.
When I created the project, I used these sequence settings:
- 1920x1080p
- 24p
- 44.1 audio
- Square pixels
- Editing Mode: Desktop
They were saved as a preset. Anyone know why this is happening and how to fix it?

Glad that you found your solution. That is the beauty of this forum - so many issues have been solved already and a bit of searching, and reading, will often get your Project out the door, and in less time than one would be on hold with T/S.
Good luck,
Hunt

Can't Open Project After Quitting iMovie 7.1.4

Hello all...
I was just creating my first iMovie project and had it just about where I wanted it. Then I quit iMovie, and restarted it, and the project was gone. The events were still there though. I didn't mess with any files in the iMovie Events or iMovie Projects folder.
What happened? Any chance of recovering my work?
Thanks!
-Eric

I had the same thing happen. Opened iMovie and all my events were there, but there was a blank "My Project" in the project pane. Even if I double-click the project file that I'm trying to see, it doesn't show up. Were you able to resolve it on your system?
Thanks,
Dan

I can't open numbers after to install the new version!!!

When I touch the app, it start to open and close immediately.
I need to work!!!!!

This is how I solved the same issue with Keynote:
Solved my issue...
I had almost 100 Keynotes in iCloud, some of which were created with iWork 08.
I used my Macbook to move all of the Keynotes to the desktop and then deleted all of the files in iCloud so that iCloud was empty.
I then reinstalled Keynote on my iPad (deleted and then re-downloaded)
The updated Keynote opened with no problem.
I then uploaded only a few recent Keynote files. No problems. Keynote on the iPad is now running smoothly.
I'm guessing the crashing has something to do with older Keynote files hanging up the new Keynote and iCloud.
1. So the suggestion would be to remove all of your Keynote files and save them locally.
2. Re-install Keynote on the iPad.

Can't open project after rebuilding Folders in Project Manager

I had a corrupted project so I renamed the cpd file. A lot of Folders in Project Manager were lost, so I recreated the folders and imported all the topics back in. I added one last Folder back in and RH was having a problem with it (I didn't write down the error message). It booted me out. Subsequent attempts to reopen this Project are unfruitful. The message I get is that a certain folder (not the same one I was adding) will be added back in and needs to be properly deleted from Project Manager. (I had renamed that Folder, but I did it inside of Project Manager.)
Thoughts?
Thanks.

Please see the announcement at http://forums.adobe.com/community/robohelp/robohelp_html
See www.grainge.org for RoboHelp and Authoring tips
Follow me @petergrainge

Can't open iPhoto after Yosemite upgrade MacBook Pro

THe wheel just spins and eventually I have to force quit. I tried resetting the Pram. It's a 2011 15". Need to get into my photos! I know I can access them in Pictures but I'd like to use iPhoto.

As a test launch iPhoto with the Option key held down and create a new, test library. Are you able to create a new library or still get the SWOD (spinning wheel of death)? If you still get the SWOD try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents the following folder: User/Library/Containers/com.apple.iPhoto
3 - reboot, launch iPhoto and try again.
NOTE: For Mavericks and Yosemite, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.

Can i open .8bf file in adobe premiere pro cs3

Please! Can someone tells me how get Wave effect, I have Wave.8bf

8 Bf is a bit much for waves. Better wait for it to die down to 5 Bf max.

Adobe Premiere CC 2014 crashing and can't open project in Premiere CC

Hi,
Till now I had been working with Premiere CC with no problems. I decided to try out Premiere CC 2014 with a new project, and I regret I did.
I start working ok, but after about an hour of editing, it freezes on playback. And its a much smaller project then the ones I've worked on CC. No color correction and very few effects yet. Its frustrating. I have to force quit premiere and start over again, for a little more time before it freezes again.
I tried to open the project in premiere CC and was surprised that I can't. I can't even save the project it appears from Premiere Pro CC 2014 to Premiere CC, just one version down??
If anyone know a way to do this please let me know. Premiere Pro CC 2014 is not ready yet.
I have a MacPro 5,1 running on 32 GB RAM, with an USB 3 raid drive. It worked seemlessly and pretty fast with Premiere Pro CC, while Premiere Pro CC 2014 gets clogged.
Many thanks

Hi, Arjun,
My OSX version is 10.9.2 and I'm using only a Red Giant plug in in two short clips, and a RED Giant transition. I have the newest Red Giant Plug in Versions (for the Premiere Pro 2014 update), they worked fine in Premiere pro CC.
Is there a way to take the Premiere Pro CC 2014 project to Premiere Pro CC?
Many thanks.

I can't open iTunes after just recently updating it on my mac mini. Instead a msg appears: "This copy of iTunes is corrupted or not installed correctly. Please reinstall iTunes. Will I lose my library?

I can't open iTunes after just recently updating it on my mac mini. Instead a msg appears: "This copy of iTunes is corrupted or not installed correctly. Please reinstall iTunes. Will I lose my library

I do not know if iTunes is in your computer at all
icon in the applications folder = application .
Download iTunes :
* http://www.apple.com/itunes/download/

Can't open projects after re-installing Premiere Pro 1.5

Similar Messages

Maybe you are looking for