Can't open PSD file to layers in Illustrator CS6 for editing?

I need to edit a Photoshop PSD file that has layers.
I believe vector lines can be edited in Photoshop but I only have PS Elements and can only edit the text.
I do have Illustrator CS6 but when I open the PSD file it will not open to separate layers, even if I choose this in the open options.
Maybe Illustrator cannot do this?
Can anyone advise please?
Thank you,
Mike.

hemmickreef wrote:
Although I can export as PSD from Illustrator - will PS read the layered files though?
If you set up the file accordingly: yes.
You have to take special care of some stuff. Search for it on this forum or the manual. It has been discussed here.
hemmickreef wrote:
What about EPS?
Forget about EPS. And especially in this context.
hemmickreef wrote:
Can PS export as .ai?
Yes, but only clipping masks. And only simple paths.

Similar Messages

Can I open psd files created in Photoshop CC with lower version? Actually CS5.

Can I open psd files created in Photoshop CC with lower version? Actually CS5.
My home and office have different version each.

Yes, PROVIDED that the file has not been saved with any layers containing any of the specific new features introduced starting with Photoshop CC and higher.
If the file has been flattened or if it was flat to begin with there will be no problems.

Can I open psd file made in photoshop cs3 with photoshop ps2?

Can I open psd file made in photoshop cs3 with photoshop ps2? Thanks in advance!

Actually you can open a CS3 file with smart filters in CS2
the only problem is CS2 will not understand the Smart filter and flatten it.
If you leave the smart filtered object alone in CS2 save the file and it should still be a smart filtered object in CS3

Photoshop cs4 - Can't open .psd files in Bridge

I cannot open .psd files in Bridge, only .jpg and .tif, as far as I know. The .psd files are flattened--no layers. What's wrong?

Generated in PS cs4...always starting with a .jpg, working on it, then saving as .psd.
I open Bridge, navigate to the file I want to work on. The round icon that is for opening files in Camera Raw is grayed out. It IS available for .jpg and .tif files. If I go to the File menu in the upper left, there is no option to open the .psd file in Bridge. If I just click Open, the file will open in the default program I use for quickly viewing all photos (Irfanview).
Thinking also about the reply from 2.rob...
I hope I don't need to designate .psd files to always open in Photoshop in order to get this to work. I have all photo types set to Open for quick viewing in Irfanview, which I like very much. Often I want to look at a .psd file w/o opening Photoshop, which takes a while to load.

Can not open psd file after electricity failure!! help""

Please help me how to open psd file. I have been working on one project. It has been saved. After that electricity failure in our house happened and now I can not open it. It is saying: Could not complete your request because the file is not compatible with this version of Photoshop.
Thank you for help.

Have a look at this:
Salvaging damaged PSDs
Mylenium

In domain environment standard users can't open .psd files

in domain environment with non admin users; getting this error: http://imageshack.com/a/img543/9085/cdnu.png
only administrators can open .psd files
what permissions needs a standard user to open .psd files?

did fw work previously to open psd files? - no, only admin users can open psd files wiht fw or ps.
do you see that error with all psd files? - yes, all psd files give this error, no error given jpeg or png files
are those cs6 psd files? - yes.
what happens if you right click fw>click 'run as administrator'? - same error.
i have to give local administrator rights to users that they can work with psd files.

How can I open AutoCAD Files with layers?

In Illustrator CC, I could open dwg or dxf files, but layers are merged(I tried all option when I saved in AutoCAD).
In Illustrator CS6 I could open the files keeping layers. So I thought there is the way I can open the files in CC.

That's a genuine bug as far as I know. Keep your CS6 handy...
Mylenium

Can't open psd files from Bridge CS6

Had both CS4 and CS6 installed, CS4 Bridge added itself when I wanted just CS6 Bridge, so uninstalled CS4. Now cannot open psd files from SC6 Bridge. What do I do?.

What is Bridge doing when you try to open the PSD file? Do you get a warning, does nothing happen? Did you open the preferences in CS6 bridge and set the file opening preferences to make sure they are set to PS CS6?

Open PSD files from Bridge to Photoshop CS6

In previous version I can open psd files to Photoshop with double clicks. Now it open to QuickTime only. How can I go back to the the old way? And I don't want to "place" the file to smart objerct either.
Please help.

Hi,
In Bridge cs6 look under the Bridge preferences (Ctrl+K or Cmd+K) and then under File Type Associations, where you can choose the applications to open files from bridge.

I can not open the file .7z to instal Photoshop CS6

I can not open the file .7z to instal Photoshop CS6

you should not manually extract that archive.
download the matching exe (the extractor) and place it in the same directory as your 7z (archive). click, or double click, the exe.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Can't open PSD file

I'm new to Photoshop CC and just installed a couple days ago. I saved a file with a PSD extension and when I try to open it I get an error message that the file amtlib.dll did not install. Anyone know about this and what to do?

On a side note, I refrained from giving you the usual advice of trying to open the file in Illustrator or in Graphic Converter if the file size was not the issue, as the would at best let you recover the flattened composite, and you need the layers.
Others have reported success in opening such a file by changing the extension to .tif, and if successful, immediately saving a copy of the file. In sheer desperation, others have changed the extension to .ai and then opened the file in Illustrator.
However, you mention "network stuff".
This is the boilerplate text I use in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://www.adobe.com/support/techdocs/322391.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

Can not open .psd files in Photoshop!

I am using Photoshop CS4 11.0.1 (Macintosh 10.5.6). Files created in Photoshop are saved to disc as .psd. Next time upon opening (both double clicking file and opening from within Photoshop) message appears: ‘Could not complete your request because the file is empty’ (I can see the file and ‘look’ at it using space bar). Older .psd files open normally. I did start using Spaces a few days ago. Maybe that's the culprit? Any ideas?

That sounds like the files are corrupted. I would be looking for disk problems.
And you really should be on MacOS 10.5.8 - they fix a lot of bugs with each dot release.

Can't Open PSD files in Photoshop! What's happening?

Hi guys,
Can someone pls tell me why when I open a PSD file in Photoshop CS2 or CS3 , the psd file apparently seems to be opened but in reality nothing happens as I only get a blank image in Photoshop? In other words, it's like the file has not been opened at all as I only get the usual very small grey and white boxes in Photoshop although at the same time the psd filename and other data associated with the file can be seen on Photoshop's interface as if the file has been loaded normally when in fact it's far from it?!!!...
Am I doing something wrong?
Just to let you know this happens after I tried to open a downloaded file from the Internet but it happens all the time when I try these kind of files in photoshop.
Pls help
Thanks in advance for your help..
Corolla...

Hello guys,
Thanks for your replies first of all.
To answer your questions John, please refer to the Print Screen in this link: http://i32.tinypic.com/2vhzvvm.jpg
I highlighted in yellow the most important things related to this topic in the pic, also referred to in my previous email.
I got the psd file from a public filehosting site and many users thanked the uploader for his great upload; thus I must have something wrong or I'm doing it wrong as the others seem not to have this prob!!!
As regards Ed's question, no indeed, I don't have any problems if I create a psd file myself closes it and opens it whenever I want.
And the filesizes are not at all small as the ones I'm talking about and which I'm having the problems with are sized from 20MB to 32MB.
Reference to your last question Ed, no I haven't tried to trash/reset preferences as per the FAQ as I have only been using Photoshop very recently.
Thanks in advance.
Corolla
Seems like strange I don't know.

Photoshop CS 5.1 - can't open psd files

Hi,
I have Photoshop CS 5.1 32bit and 64bit (running on 64bit windows), and sometimes it happens that I can't open files (jpg, psd, ...) in it. When I drag and drop a file to photoshop, or click on Open file dialog, or even try to make a new document, nothing happens.
I have tried tricks with deleting preferences, but it didn't help. The only thing that helps is restarting windows - but this is not a practical solution for me.
I would expect some help from Adobe on this, since we pay a lot for their products!
Thanks,
Marek

Hi, Marek,
Unfortunately this is a forum for the CommunityHelp application and not a Photoshop forum, so there isn't a way to get an answer here.
Might I suggest that you describe your problem in a Photoshop forum such as:
Photoshop (Mac users) http://forums.adobe.com/community/photoshop/photoshop_macintosh
Photoshop (Win users) http://forums.adobe.com/community/photoshop/photoshop_windows
You can see a list of all Photoshop forums at:http://forums.adobe.com/community/photoshop
--Kirsti
Adobe Community Help and Learning team
Re: PSD file corrupted!

How can I open psd files into Potoshop CC from bridge

PSD files will not open into Photoshop CC from Bridge CC. I get this error message...“Windows cannot find, C:\program files\adobe\adobe photoshop CS5 (64 Bit)\photoshop.exe.” I can open jpeg, tiff and raw. I'm using Windows 7. I do not have CS5 on my computer. Help...

You must have uninstalled CS5 after you installed CC. Your registry is fouled up. You can either uninstall CC, run the Script Cleaner and reinstall, or fix registry as below.
After looking at a new user's registry HKEY_CURRENT_USER and comparing it to the one on the original user, I found a registry value which was not changed, and should have been.
I found a key:
HKEY_CURRENT_USER\Software\Classes\Applications\Photoshop.exe\shell\op en\command
This key was set to the path for Photoshop CS6 when it should have been set to Photoshop CC.
In other words, in my case, it was set to:
"C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Photoshop.exe" "%1"
When I changed the CS6 to a CC, in other words, so the whole key reads:
"C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Photoshop.exe" "%1"

Can't open PSD file to layers in Illustrator CS6 for editing?

Similar Messages

Maybe you are looking for