Can't open radio feeds in itunes 10.6

I just upgraded to itunes 10.6 and find that I can't open radio feeds. I had been having no problems until recently. Before I upgraded I had a couple of occasions of difficulty opening the link but now it is impossible. In my old version of itunes if it couldn't open the link it would indicate that I should try later. Now it just shows the horizontal barber pole and says it is refreshing the category and I can't stop the one I clicked on or start a new one. I got Jazz to open but Classic Rock and others won't open. If I try to open another category it won't stop the refreshing on the previous one.
I work on a G5 with 10.5.8. I checked on Apple's support sight and checked my settings in preferences for firewall and it allows all incoming transmissions, so it shouldn't be a port accessibility issue.

Well I was having the same problem with itunes 10.6 .
Sometimes the radio feeds work and sometimes they don't. You can try reinstalling the software or downgrading to a previous version like itunes 10.5. (although the radio feeds depend on the broadcasting channel).
Here's a link for itunes 10.5 beta for mac (71.6MB) takes ~ 30 minutes to download
https://rapidshare.com/#!download%7C443tg%7C1934066085%7Citunes_10.5_beta__mac.d mg%7C75028%7CR~F085B3BB684042AAC315E1B3ED5CFD01

Similar Messages

  • HT201263 my phone can not going upto date .and can not open.only coonnect to itune pic is on the mobile when i switch on

    my phone can not going upto date .and can not open.only coonnect to itune pic is on the mobile when i switch on

    found the solution on the forum already!

  • Can I open an App inside iTunes?

    Can I open an App inside iTunes?

    So If I get a document App or sheet App on my iPod, the data stays in the App on my iPod and I can't work with it on my Windows PC.  Correct?

  • Can I add radio stations to iTunes?

    Thanks Ryan, but how in the name of our dear lord in heaven do I add a radio station to a smart playlist.
    All I have is the URL:
    http://www.garnierstreamingmedia.com/asx/radio538.asp
    So no drag+drop.
    Ryan M.
    Level 3
    Joined: Feb, 2003
    Posts: 2852
    Baltimore, Maryland Yes, you can add radio stations to iTunes. However, you cannot add the radio stations to the “Radio” source in the source list. You only have the ability to add radio stations into the “Library” source.
    You can always make a Smart Playlist, though, and name it something such as “My Radio Stations” or a name of your choice. What this will do is organize all of your personal radio stations that are not listed in the "Radio" source and create easy access and some organization to your downloaded internet radio stations in iTunes. To find internet radio stations, here are a few links:
    • DDance.FM Digital Dance Radio
    • Macstreams/Rogue Amoeba
    • Live365.com
    • UK Radio Stations
    • Shoutcast
    • Radio-Locator (not the best for locating online radio feeds)
    There are other sites, of course. When you go to these sites, you will see lists of internet radio stations. To get the station of your choice into iTunes, you will need to download either the .pls, .m3u, or .mp3 file from that station. Once the file has downloaded, find it on your computer and double-click it. This should open iTunes. Note: XM Radio Online will not work for this. If it ever does work, I will update this. Sorry! If not, drag the file into iTunes Library and it will import into your library. Now, onto organizing and creating the Smart Playlist of your internet radio stations.
    To create a Smart Playlist based on the internet radio stations you have downloaded, go to File > New Smart Playlist. A window will appear asking you for information. Make sure the “Match the following condition:” box is checked. From the first drop down menu, choose “Kind.” From the second drop down menu, choose “is”. To the right of that is a blank field where you can enter in what kind of file you wish to have in this Smart Playlist. You will want to add “MPEG audio stream” (without quotes) in that field.
    Lastly, check the box that says “Live Updating” which will update your Smart Playlist of radio stations when you add more stations to your library. Then whenever you want to listen to your favorite radio station, you can click on that Smart Playlist in the source list and you will see all the internet radio stations you have added to iTunes.
    Enjoy the music!
    Note: There is no way of adding an internet radio station to the "Radio" source list in iTunes. Contacting Apple more than likely won't yield a response, but you can list your station on Shoutcast, Live365, RogueAmoeba (links listed above) to be seen and heard by listeners worldwide.
    iTunes does not support Windows Media Player format or Real Player One format, so those streams cannot be played through iTunes and must be played through their respective applications.

    I read the answer to this question and appreciated the information, but where on the web do you find the sources that were listed - namely:
    • DDance.FM Digital Dance Radio
    • Macstreams/Rogue Amoeba
    • Live365.com
    • UK Radio Stations
    • Shoutcast
    • Radio-Locator (not the best for locating online radio feeds)
    I would like to add internet stations, too, but don't know how to find the stations.
    ----wb

  • I downloaded the new iOS7 but i cant download my apps to my phone i can only open them up on iTunes any advice why?

    Why cant i download my apps no more i can only open them on iTunes does any help please thanks.

    Try rebooting your iPad and see if they reappear.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If they still do not show up, make sure hat you don't have content restrictions set that could prevent certain apps from showing up on your iPad. Settings>General>RestrictionsAllowed Content.
    if you still don't see them, connect your iPad to iTunes on your computer and you should see them in the iPad mini screens on the right side of iTunes after the iPad has been selected under "devices" and when you are in the apps pane of iTunes.

  • Can't open updated version of iTunes (7.6)

    When i opened my iTunes, it told me i needed to upgrade to the newer version of iTunes to play my an album that i pre-ordered. So i did, but when i tried to open it, an error message popped up...something about an error with Quicktime.
    I tried re-installing iTunes all over again, but the same message came up. So i deleted Quicktime from my computer, but left iTunes, & then installed Quicktime.
    My Quicktime works, i can play videos using Quicktime, but i can't open iTunes.
    Re-installing Quicktime doesn't work & re-installing iTunes doesn't work. What else can i do???? This happened the last time i updated too, so i am pretty ****** off. Any suggestions??????

    I was having a similar problem and searched this forum for 2 days trying to find the solution...and couldn't!
    I decided to solve try a few things myself.
    I turned the SpyWare off first then . . .
    1 . I opened the Register Editor, by typing in "Regedit" in the run application for XP or start search for Vista.
    2 . I searched all of the files, around six of them, and deleted ALL quicktime and itunes folders.
    3 . I then went into the Program Files on the hard drive C:\ and deleted the files iPod, iTunes and QuickTime.
    4 . After that I went back to C:\ and went into Windows and deleted a file named QuickTime VR and all other QuickTime and iTunes files.
    5 . Restarted the computer
    6 . Reinstalled ONLY QuickTime 7.4 from the website
    7 . Reinstalled iTunes 7.6 from the website and it worked!
    Hope this works, it was a nightmare to figure out and a hassle to do but it does work....for me at least!
    Good Luck!

  • Can't open a track from iTunes in Garageband.

    Why can't I open a track from iTunes 12.1.2.27 in Garageband 10.0.3?  The track is grayed out.
    I loaded the tracks into iTunes from a legally purchased CD.
    I'm using an iMac OS X Yosemite Version 10.10.3

    Are the tracks in iCloud Match?  Download them first, otherwise you cannot use them in the Media Browser.  GarageBand needs a local copy.
    from a legally purchased CD.
    Even a legally purchased CD may have a protection.  Do the songs show in your iTunes Library as
    "Kind : Protected AAC audio file", when you open the "File" tab in the Inspector panel?
    Then you cannot use them directly in GarageBand.  Make a backup copy of the album by burning an Audio  CD in iTunes  and reimport. That will help sometimes.

  • Since update I can not open app store or Itunes. Just has loading message

    help please. I can open App store or Itunes on ipod touch 4g since ios5 update

    Have you tried resetting your iPod. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.

  • Can't open my songs in iTunes

    Hi
    I installed iTunes match and have uploaded my songs. Now a lot of songs appear more brightly grey (not black) with a cloud, so i can't open, steam, listen, them.
    Can someone help me?
    Thank you!
    Greetings from switzerland and sorry for my bad english :-)
    Claudia

    Hello Claudia,
    Thank you for the details of the issue you are experiencing with iTunes Match.  I found an article with some steps you can take when you're not able to play or download songs using iTunes Match.
    I recommend reviewing the section titled "If you are unable to download a song, play a song, or access songs from iTunes Match" in the following article:
    iTunes Store: Troubleshooting iTunes Match
    http://support.apple.com/kb/ts4054
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I can't open my Snow Leopard iTunes Library on my Lion MacBook Air :-(

    So my MacBook Air was running Snow Leopard and I was running my iTunes Library off an external. I installed Lion and figured everything was good to go until I just went to sync my iPad and I can't open my old iTunes Library.
    Anybody have any help? I know I can create a new one, but all my preferences and iPhone and iPad settings are in the old one and it was perfect!
    Thank you!

    Double click the disc icon on the Desktop.
    Click Finder in the menu then scroll down and click Preferences then select the General tab.
    If it isn't checked..  select:  Hard disks

  • Can't open store menu in itunes

    can't open store menu in itunes

    What happens when you try?
    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
    No data will be lost.

  • Circular Redirect - Can't submit my feed to iTunes.

    Hi. PLEASE Help! Anyone know what i am doing wrong? My feed works if i subscribe to it using the advanced feature in iTunes. WHen i try to submit, it says "We had difficulty reading this fee. Circular redirect to 'http://www.tmicast.com:80/la-hoops/'
    My feed that works through advanced is: http://www.tmicast.com/la-hoops/?feed=rss2
    Thanks for the help.

    Looking at the code, it appears that you do have a circular redirect of the actual feed itself.
    You have a line that says:
    <itunes:new-feed-url>http://www.tmicast.com/la-hoops/?feed=rss2</itunes:new-feed-url>
    That line is there to tell iTunes where to find the feed if you've changed URLs recently. However, in your case you have not. So, it goes to the feed and is told to redirect to itself then redirect to itself then redirect to itself...
    Delete that line and you should be good.
    Jon
    Dual 2.3 G5 4BG RAM   Mac OS X (10.4.6)   The Rest of Everest Video Podcast therestofeverest.com

  • How can i open the apps on iTunes

    how can i open the apps on itunes

    You can't. Those apps are for iOS devices such as iPhones and iPads, and won't run on a computer. For Mac apps, launch the App Store application.

  • Can't open fresh install of iTunes (fresh install of Windows 7)

    Hi everyone,
    Well this problem has my head spinning. I'm an IT troubleshooter so I've done a lot of various trailing already which I detail below.
    Basically, we're looking at a brand new computer with a new installation Windows 7 Home Premium 64-bit. I have installed the latest iTunes 64-bit however when I double click the icon it never opens. No error given.
    Upon checking the Event Viewer I can see two corresponding Application Allerts:
    1/
    Faulting application name: iTunes.exe, version: 12.1.0.71, time stamp: 0x54c76235
    Faulting module name: iTunes.dll, version: 12.1.0.71, time stamp: 0x54c7621b
    Exception code: 0xc000001d
    2/
    Windows cannot access the file  for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program iTunes because of this error.
    Upon research, a few people report error 2, however their error message always correctly identifies a file name (i.e., "Windows cannot access the file foobar.dll for one of the following reasons...."), and they are able to troubleshoot from there. As this error has a blank space for the filename I'm not so lucky.
    I have tried:
    * Starting iTunes in Safe Mode (no change)
    * Starting iTunes with a new library (holding shift) (no change)
    * Creating a new Windows profile and starting iTunes there (same problem) (both accounts have Admin rights)
    * Uninstalling iTunes and all other bundled Apple applications as per (Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support)
    * Downloading a fresh installation package and re-installing
    * chkdsk /f
    * sfc /scannow
    * Repeating the above with the antivirus application uninstalled
    * Repeating the above and running the installation file by specifically right-clicking and choosing to Run as Administrator
    * Running iTunes by specifically right-clicking and choosing to Run as Administrator
    * Repeating the above and installing to default location on C: (an Intel SSD)
    * Repeating the above and installing to D: (a Western Digital HDD)
    * Installed Quicktime and tested if this opens - it does. (Someone, somewhere suggested seeing if this worked).
    * Following the advice here (iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8 - Apple Support)
              I can confirm that with the above, I can delete the file and when I attempt to launch iTunes again the file is recreated but iTunes still doesn't open
    There is ultimately an iTunes library that I'd like to re-import back in, but for now I've kept this out of the way until such time that I can open iTunes with a blank library.
    I'd like to think my troubleshooting has been fairly exhaustive so far, but would also like even more to have a solution. If anyone can suggest anything it'd be greatly appreciated.
    Kind Regards,
    Gavin

    I was having a similar problem and searched this forum for 2 days trying to find the solution...and couldn't!
    I decided to solve try a few things myself.
    I turned the SpyWare off first then . . .
    1 . I opened the Register Editor, by typing in "Regedit" in the run application for XP or start search for Vista.
    2 . I searched all of the files, around six of them, and deleted ALL quicktime and itunes folders.
    3 . I then went into the Program Files on the hard drive C:\ and deleted the files iPod, iTunes and QuickTime.
    4 . After that I went back to C:\ and went into Windows and deleted a file named QuickTime VR and all other QuickTime and iTunes files.
    5 . Restarted the computer
    6 . Reinstalled ONLY QuickTime 7.4 from the website
    7 . Reinstalled iTunes 7.6 from the website and it worked!
    Hope this works, it was a nightmare to figure out and a hassle to do but it does work....for me at least!
    Good Luck!

  • Can't open any version of iTunes or use quicktime

    yesterday i downloaded and installed iTunes 7 (before i knew that there was problems with it). when i opened it massive chunks of my library were missing so i decided to revert back to an earlier version of itunes. removed iTunes 7 and installed iTunes 6.0.5 (think that's the correct number) but it wouldn't open. it comes up with a message saying that iTunes had encountered an unexpected error and needs to close. i've tried uninstalling and reinstalling different versions of iTunes and rolling back to various system restore points on my computer but i constantly get the same message. I can't use quicktime either - it just comes up with the same message.
    HELP!!!

    I can't use quicktime either - it just comes up
    with the same message.
    just doublechecking your precise error message. is it
    an "itunes has encountered a problem" message? or is
    it something a bit different? if it's different, what
    is the precise text? (include error message numbers
    if you're getting any.)
    i don't know if this will mean anything to you...
    Faulting application pictureviewer.exe, version 7.1.3.100, faulting module unknown, version 0.0.0.0, fault address 0x63656666.
    for some reason the error message i was getting on screen when i tried to open QT isn't coming up now but QT isn't opening either. i got that text from going to control panel>admin tools>event viewer. the text i was getting previously when i tried to open QT was "quicktime has encountered an unexpected error and needs to close" (or something v similar).
      Windows XP  

Maybe you are looking for

  • MBP fans @ 6000 rmp when charging

    The fans of my 2yr old mac have been going nuts lately (high 5000s/6000s rpm) so after looking into it with iStats I was led to change the battery (last one was health @36% w 157 cycles). Things are now great in terms of not having to keep the laptop

  • Error while configuring ths schedule

    Hi all, I was created the reports based on x server, i am able to see all the reports. At the time of configure the schedule option, i was provided the all information(database connection and all) after that i am selecting the install schema it is gi

  • How to unlock an old iphone that we can not remeber the password

    I have an old iphone 3gs that had a password on it - I am needing to use the phone but can not remeber the password - how can I reset it?

  • A issue about library of report painter?

    why can't i put table vbap into a library? It informs that "The Report Writer can only report on tables if the attributes of these tables that are relevant for reporting are defined in control tables. This is not the case for table VBAP." and Message

  • Debug BAPI Values

    Being a newbie to Abap ,i am looking, howto debug BAPI input values-variables? Values(values of BAPI Import parameters ) are being passes to BAPI from Mobile app. How/where can we check the values being passed to BAPI in R3 i.e the values with which