Can't Open Script!!!

What's the deal with not being able to access my script? It shows in Projects but will not open in Authoring. 50 minutes on hold and had to hang up. So frustrating. Very sceptical about this application when you can't access intellectual property.

Hi,
Please try clearing the cache( or switching to a different browser). We pushed an update yesterday and it could be that the browser is still loading old data.
Thanks,
Sunny

Similar Messages

CUCM 4.1(3) installing Dev Pack 89 - "can't open script file"

Hello All,
I'am trying to isntall the 4.1 dev pack 89 on CUCM 4.1(3) server. It unpacks the contents then says "can't open script file". I closed the CSA agent and I have no virus scanners running. Has anyone had this issue before? Thanks
Jason Steig

Paul,
I assume you are referring to 10.1.3 DP4. The previews are not reverse compatible with previous previews. Unfortunately this means that you will need to re-map any project created in 10.1.3 DP3 or earlier.
We believe we have finalized the file formats for the release and our intention is to have the DP4 projects be completely compatible with the final release.
Sorry for the inconvenience,
Doug

Can not open script editor in HDS

Hi everybody,
When we open Script Editor, we see the notice: "cannot connect to distributor, script editor will now exit"
Can you help me to resovle it?
We use ICM 7.1
Thanks you so much!

You might also see this message if the services are running, but you are using Windows Remote Desktop (RDP), and are not logged in with console mode.
Try this: mstsc aaa.bbb.ccc.ddd /admin
where aaa.bbb.ccc.ddd is the IP address or hostname of your HDS. The /admin switch gets you in with console mode.
Net-net, you should see the ICM process' console windows on the taskbar. If you don't, then either the service isn't running, or you're not in /console mode.
fyi - ICM 7.1 is long-since end-of-life. You should seriously consider upgrading to a more recent, supported release.

Can't Open Script Editor

Hi!
Yesterday While writing an Applescript, I copy pasted some lines (like 50 lines) of code to my script editor, it freezed so I close it, it no longer opens, every time I open it, it justs Freezes instantly.
I already tried Restarting and everything.
I'll probably reinstall it, but how?
Any ideas??
Script Editor 2.7
Mac OSX Yosemite 10.10.2
I have an MacBook Pro (Retina, 13-inch, Late 2013)

No error messages on Console and I lost my Recovery CD.
Where I can find an original copy of the app?

WHY I CAN'T OPEN MY SCRIPT?

I have been working on my script for several months in Adobe Story Free with no problem, but this week I can not open it at all. I can't even see it listed. I only ever access it on one computer and it has never been a problem before.
Can someone please help me with this?

Hi,
We have pushed a new release today. See if you are able to access your script now. If you are still having problems accessing your script, please tell us a convinient time so we can set up a remote session with you.
Regards,
Sunny

Can't open Fl-published .html in Dw; get warning re: script/get Fl/Fl player

I designed a Web site in Fl CS3 with AS2. I published .fla to create .html file. Usually I can then open this .html in Dw and manipulate positioning etc. but I have been getting this warning when I try: // Provide alternate content for browsers that do not support scripting // or for those that have scripting disabled. Alternate HTML content should be placed here. This content requires the Adobe Flash Player. Get Flash
I have Fl and I have updated Fl player. My AS contains no errors. Is there a setting somewhere that is creating this problem? What really puzzles me is that I had no problem doing this last week and now I can't get past this warning to make some simple adjustments to my index.html file.

I have the same issue. My project is super simple. All the files are in the same directory. The doc class and the .fla have the same name. The project publishes without a hitch in Flash Professional CC. When I try to add the project to Flash Builder 4.7 it give me:
Exception in BridgeTalk call
Function: getFLABuildPaths
Error message: Error. Cannot find the file ....
I have checked the path to the .fla twice and scrutinized the spellings and they are correct. It is pointing right to the correctly named .fla, but for some reason it fails. I'll post if I find out something usefull.

I have stopped too many scripts in Firefox and I can't open any websites in Firefox anymore. I just get blank pages. What do I do now?

3 websites gave me this message:- "A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete." I chose to stop the script each time. However I have stopped too many scripts in Firefox and I can't open any website in Firefox anymore. I just get blank pages. What do I do now?

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox and any leftover program files and then reinstall Firefox. Please follow these steps one by one:
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu) and confirm all upcoming messages.
#Now, uninstall Firefox by following the steps mentioned in the [[Uninstall Firefox from your computer#w_uninstall-firefox|Uninstall Firefox]] article.
'''IMPORTANT:''' On Windows, the uninstaller has the option to remove your personal data and settings. Make sure that you do '''not''' check this option; otherwise all of your bookmarks, passwords, extensions, user customizations and other Firefox [[Profiles|user profile data]] will be removed from your computer.
After uninstalling Firefox on Windows, delete the "Mozilla Firefox" program folder, located by default in one of these locations:
* '''(On 32-bit Windows)''' ''C:\Program Files\Mozilla Firefox''
* '''(On 64-bit Windows)''' ''C:\Program Files (x86)\Mozilla Firefox''
#Go to the Windows Start menu and click on "Computer".
#In the Explorer window that opens, double click Local Disk (C:) to open the C:\ drive.
#Find the "Program Files (x86)" folder or "Program Files" folder.
#* On 32-bit Windows, double-click the '''Program Files''' folder to open it.
#* On 64-bit Windows, you will see a "Program Files (x86)" folder AND a "Program Files" folder. Open the '''Program Files (x86)''' folder.
#Look for a '''Mozilla Firefox''' folder. If you find one, right-click it and select ''Delete'' and confirm that you want to move the folder to the Recycle Bin.
Now, go ahead and reinstall Firefox:
#Double-click the downloaded installation file and go through the steps of the installation wizard.
#Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!

Can we include the customize results in the Open Script Result Summary

hi all
can we include the customize results in the Open Script Result Summary if we include what is the code.
customize result i mean
Scenario: i am checking the concurrent job is completed successfully or not
result:Concurrent Job Completed Successfully
i am want to see the above result in the Open Script Result Summary can anybody help me on this.

You want to launch a concurrent program, right? And to check the result, right?
Is that for a functional test script or a load test script?
Let's say it's functional. You have basically 2 options:
* Do it separately. You create a scenario which launches the program and you write the RequestID in a file, then you create a second script which read the file and then go to the concurrent processing dashboard and search for the RequestID and check the status. You have to desynchronize the 2 scripts. Launch the first one. And then, later on, launch the 2nd one when you are sure the program is finish.
* You do it in one single script and you wait til you get the status. See the code below I've written for a customer (for a POC);
This is not the best option in my opinion because you don't know how long you need to wait and therefore you block other scripts execution... But the customer wanted it like this.
               do {
                    delay(5000);
                    forms
                              .textField(
                                        "//forms:textField[(@name='JOBS_PHASE_0')]")
                              .storeAttribute("Batch_Phase", "text");
                    info("Phase du traitement: {{Batch_Phase}}");
                    forms
                              .button(56,
                                        "//forms:button[(@name='JOBS_REFRESH_0')]")
                              .click();
               } while ((eval("{{Batch_Phase}}").equals("Running")));
But wait, after having written all the stuff above, maybe you just want to check the toolbar status, is that correct?
Normally, OpenScript automatically insert a "status bar test".
Then I guess there's a default time-out (30 or 60 sec I think), you can maybe change to adapt.
Well, looping could also be an option as i describe above.
Let me know
JB

Can't open Fl-published .html Site in Dw; get warning re: script/need Fl

I designed a Web site in Fl CS3 with AS2. I published .fla to create .html file. Usually I can then open this .html in Dw and manipulate positioning etc. but I have been getting this warning when I try: // Provide alternate content for browsers that do not support scripting // or for those that have scripting disabled. Alternate HTML content should be placed here. This content requires the Adobe Flash Player. Get Flash
I have Fl and I have updated Fl player. My AS contains no errors. Is there a setting somewhere that is creating this problem? What really puzzles me is that I had no problem doing this last week and now I can't get past this warning to make some simple adjustments to my index.html file.

Well, it took a long time, but I eventually got it working properly. All of the presets and codecs show up, I can import AVCHD files properly with audio, and the project I couldn't open before now opens fine, so it turned out not to be a corrupt project. It looks like the problem was that the cleaner script didn't actually clean everything it should have, and I had to do it all manually.
I uninstalled all of the Adobe Creative Cloud software, rebooted, ran the CC Cleanup script, and rebooted again.
Then I uninstalled Flash and ALL other Adobe software I had on my machine.
Then I used the Find Any File app to find every reference on my Mac to any file with "adobe" in the name--including system files--and deleted them and emptied the trash.
The only Adobe things I left on my machine were the Adobe RGB color profile and any Adobe fonts I had.
Empty the trash again, reboot again.
Then I used the CC installer to install Premiere and only Premiere (I didn't even install Adobe Media Encoder) because I didn't want to go through all that download time only to have it fail on me again.
And at long last it worked. Then I went back and installed Media Encoder, which didn't seem to break anything, so I went back and installed the other CC software I wanted on my machine, and things are working at last.
The "cleaner" script leaves a LOT of Creative Cloud-related files on your machine, which, in my opinion, means it's not a very effective "cleaner." It seems to want to leave a lot of preference files and other files whose purpose I don't know (but I deleted them anyway). There should at least be a checkbox somewhere on the cleaner that says "wipe absolutely everything related to Adobe off of my machine".
Thanks again for your suggestions, Neil.
dave

Get error when installing .json back up file A script on this page may be busy, or it may have stopped responding. You can stop the script now, open the script

get error when installing .json back up file A script on this page may be busy, or it may have stopped responding. You can stop the script now, open the script
Also tried to chang places.sql or what ever to my back up .json file and that wouldnt work. Is there a way to just move my backup .json file some where my bookmarks are a bigger file and i t will take a bit to upload.

A script on this page may be busy, or it may have stopped responding. You can stop the script now, open the script in the debugger, or let the script continue.
Script: chrome://browser/content/places/editBookmarkOverlay.js:909

Can't open perl script "/opatch.pl": No such file or directory

After installed Oracle 9.2.04 and applied patch p3006854, p3948480 and p4188455 on Linux AS4, I found that I can not start agent. If I execute "agentctl start", oracle will through our error like:
Starting Oracle Intelligent Agent.../u01/app/oracle/product/9.2.0/bin/dbsnmpwd: line 156: 1855 Segmentation fault nohup $ORACLE_HOME/bin/dbsnmp $*
$DBSNMP_WDLOGFILE 2>&1/u01/app/oracle/product/9.2.0/bin/dbsnmpwd: line 156: 1868 Segmentation fault nohup $ORACLE_HOME/bin/dbsnmp $* >>$DBSNMP_WDLOGFILE 2>&1
/u01/app/oracle/product/9.2.0/bin/dbsnmpwd: line 156: 1880 Segmentation fault nohup $ORACLE_HOME/bin/dbsnmp $* >>$DBSNMP_WDLOGFILE 2>&1
/u01/app/oracle/product/9.2.0/bin/dbsnmpwd: line 156: 1892 Segmentation fault nohup $ORACLE_HOME/bin/dbsnmp $* >>$DBSNMP_WDLOGFILE 2>&1
I searched Internet and some article said p3238244 is needed. So I started to install it. At the very beginning, the error is "Can not find ../oui/OraInstall.jar". I found this file in "../oui/jlib" and copy it to "../oui". Then I run "opatch apply" and the error is "Can't open perl script "/opatch.pl": No such file or directory". This time I can not find much similiar information from google.
Any idea?
PS: I changed path of inventory during the installation to "/henry/cwdata" ($ORACLE_HOME=/henry/app/oracle/product/9.2). Will this action cause the error below? What is the usage of inventory path exactly?
Much appreciated!
Henry

Below is my env and .bash_profile.
[oracle@henrylinux lib]$ env
SSH_AGENT_PID=2814
HOSTNAME=henrylinux
SHELL=/bin/bash
TERM=xterm
HISTSIZE=1000
NLS_LANG=AMERICAN_AMERICA.ZHS16GBK
GTK_RC_FILES=/etc/gtk/gtkrc:/home/oracle/.gtkrc-1.2-gnome2
WINDOWID=39880874
OLDPWD=/home/oracle
ORACLE_OWNER=oracle
USER=oracle
LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;0 1:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.b tm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31: *.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:* .bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;3 5:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
ORACLE_SID=ora92
GNOME_KEYRING_SOCKET=/tmp/keyring-BckaCh/socket
ORACLE_BASE=/henry/app/oracle
SSH_AUTH_SOCK=/tmp/ssh-nsWlKX2762/agent.2762
KDEDIR=/usr
SESSION_MANAGER=local/henrylinux:/tmp/.ICE-unix/2762
GDN_LANG=en_US
MAIL=/var/spool/mail/oracle
DESKTOP_SESSION=default
PATH=/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/oracle/ bin:/henry/app/oracle/product/9.2/bin:/henry/app/oracle/product/9.2/Apache/Apach e/bin:
INPUTRC=/etc/inputrc
PWD=/henry/app/oracle/product/9.2/ctx/lib
THREADS_FLAG=native
LANG=en_US.UTF-8
LC=en_US
ORACLE_TERM=xterm
GDMSESSION=default
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
HOME=/home/oracle
SHLVL=2
LD_ASSUME_KERNEL=2.4.19
GNOME_DESKTOP_SESSION_ID=Default
LOGNAME=oracle
LC_CTYPE=zh_CN.GB2312
CLASSPATH=/henry/app/oracle/product/9.2/JRE:/henry/app/oracle/product/9.2/jlib:/ henry/app/oracle/product/9.2/rdbms/jlib:/henry/app/oracle/product/9.2/network/jl ib
DBUS_SESSION_BUS_ADDRESS=unix:abstract=/tmp/dbus-Z7HVMAC8Dh
LESSOPEN=|/usr/bin/lesspipe.sh %s
ORA_NLS33=/henry/app/oracle/product/9.2/ocommon/nls/admin/data
DISPLAY=:0.0
ORACLE_HOME=/henry/app/oracle/product/9.2
G_BROKEN_FILENAMES=1
COLORTERM=gnome-terminal
XAUTHORITY=/home/oracle/.Xauthority
_=/usr/bin/env
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export ORACLE_BASE=/henry/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/9.2
export PATH=$PATH:$ORACLE_HOME/bin:$ORACLE_HOME/Apache/Apache/bin:/sbin
export ORACLE_OWNER=oracle
export ORACLE_SID=ora92
export ORACLE_TERM=xterm
export LD_ASSUME_KERNEL=2.4.19
export THREADS_FLAG=native
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ORACLE_HOME/lib
export NLS_LANG="AMERICAN_AMERICA.ZHS16GBK"
export ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
export DISPLAY=:0
export LANG=en_US
export GDN_LANG=en_US
export LC=en_US
export CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib:$ORACLE_HOME/network/jlib
export LC_CTYPE=zh_CN.GB2312
export PATH
unset USERNAME

Can I open a recordset On Client Side Script?

Hi Guys,
On a form I have a client side VBscript thet checks the email
addy a user has added into a text box in a form and if its in the
array of values set in the script it gets refused. This works.....
I would like to adapt this a little if possible and make it
so that instead of hardcoding the array values into the script, I
would like to have the array values taken from a recordset because
it will allow the user to add and delete bad domains via a form and
not need to go into the page code to add to the array I have at the
moment.
I have tried serval times to replace my array loop with a
recordset while loop to get the badDomains from the field in the
database but I just get script error on page in my task bar.
Can I open a recordset from a client side script?
Id apprecaiate eny thoughts on how I can do this.
Thanks again
Tag

Hi Envision,
Its actually VBScript im in at the moment...
I have tried to get my client script to run but im still just
not getting it although I dont think im far away, mixing client
side and server side scripts to get this array loaded is still
throwing me a bit !!!!!!
I tried to follow the For loop suggested in JS but did it in
VBS and wondered if anyone could give it a look and point me to my
errors?
I dont like just posting code without being asked as its a
bit presumptious of me but Im not asking anyone to write this for
just point me to my problems hopefully.....
Here is what I have , when the page loads I used DW to make a
recordset for me to open the table with stored bad domains and this
client script is supposed to harness the recordset created server
side by DW and loop through the field and compare whats in the
forms email textbox..
[code]
Sub CheckMail()
Dim sValidationMessage
Dim sEmail
Dim sBadDomains()
Dim nIndex
dim counter
sValidationMessage = ""
sEmail = Document.Form2.email.value
nIndex = 0
counter =<%=(rsGetBadDomains_total)%>
If Not (InStr(1, sEmail, "@") > 0 And InStr(1, sEmail,
".") > 0) Then
sValidationMessage = "You have entered an invalid email
address!"
End If
If Len(sValidationMessage) = 0 Then
For nIndex = 0 to counter
sBadDomains(nIndex) =
<%=(rsGetBadDomains.Fields.Item("sBadDomains").Value)%>
If InStr(1, sEmail, sBadDomains(nIndex)) > 0 Then
sValidationMessage = "You have entered an unsuitable E-Mail
address please use your main ISP E-Mail address"
Exit For
End If
nIndex=nIndex+1
Next
End If
If Len(sValidationMessage) > 0 Then
MsgBox sValidationMessage
document.Form2.email.select
Else
document.Form2.submit()
End If
End Sub
[/code]
Thanks again for all the support so far.
Regards
Tag

Adobe Story Free can not open movie script!

Hi Adobe.
I can't open one of my scripts i Adobe Story Free. Not on Mac or PC.
We are in the middle of an movie production and have a serious problem as I hope you can understand.
We are using many your product and are evaluating Story in this movie....
Could you please help?
We even installed an Air vers. 3.3... Did not help...
Morten

Hi,
To understand the issue better, can you come into the connect session right away: https://my.adobeconnect.com/_a295153/goldmanstaff
Regards,
Sunny Ladkani
Adobe Story Team

Unable to capture the adf table column sort icons using open script tool

Hi All,
I am new to OATS and I am trying to create script for testing ADF application using open script tool. I face issues in recording two events.
1. I am unable to record the event of clicking adf table column sort icons that exist on the column header. I tried to use the capture tool, but that couldn't help me.
2. The second issue is I am unable to capture the panel header text. The component can be identified but I was not able to identify the supporting attribute for the header text.

Hi keerthi,
1. I have pasted the code for the first issue
web
                         .button(
                                   122,
                                   "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
                         .click();
                    adf
                    .table(
                              "/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
                    .columnSort("Ascending", "Name" );
     }

I can't open an old Domain file

About two years ago I made a website for my dad. www.larrylewisphotography.com. Well I have finally set up an etsy store to sell his photographs and I need to get back in and link the "order online" tab with the new domain for his etsy store. I have since purchased a new computer and have even upgraded HDD's over the past two years. I have saved the original Domain file which holds all the info for the website. When I tried to open it today with iWeb all it does is opens up a new templte for me!
I really don't want to have to redo everything on the webiste! When I checked in the package contents of the domain file everything is still there. iWeb just won't open it.
Does anybody have any suggestions?

In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
Once you get the library visible remove the new domain file from the iWeb folder and put your original file there. Then open your domain file in Lion with the following script that Cyclosaurus has provided us with. You can compile it into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
Just launch the applicaiton, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiiled version with this link: iWeb Switch Domain.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Can't Open Script!!!

Similar Messages

Maybe you are looking for