Can't open .ses file in Cool Edit 2.1

Hello,
I hope I'm on the right forum here. I have a big problem with a *.ses file in Cool Edit 2.1. When I try to open it it simply doesn't do anything. It starts Cool Edit but it doesn't start importing the files and effects of the tracks.
I saved the project last night, there is no recover file for it. There are to many wav files to recover it manually...
If someone could help me and give an advice why I can't open it anymore, I would be really thankful!
Greetings,
Christian

Thanks Steve
Just email me the ses file (no audio).
Send it to me via the aatranslator website
You should checkout my SesBackup program - also available via the same site

Similar Messages

Can't open .mov files for iMovie editing; can't even view in QuickTime, etc

Our band recently had a videographer record our performance using two panasonic hd cameras: AG-HVX200 and HPX170. Both were set to hd 720 X (?) at 30 fps.
All files were saved as .mov files.
We can't see them at all. We were told that they were designed to be opened in Final Cut Pro (which we told him not to do).
We do have Final Cut Express, but neither FCE nor iM allows us to select the files ("grey'ed" out).
Can someone please help us understand how to open these files? Do we need a specific codec?
Thanks much.

I am no expert on DVC Pro HD, but here is what I found out.
HD compression format by Panasonic.
Similar compression type to DV 25 but uses a higher bit rate up to 100 Mbit/sec, depending on
the specific HD format being recorded. Highly popular format because of its lowe r bit rates, and
incredible resolution considering how highly compressed the format is.
This format is very popular as an acquisition format used with Panasonic's Varic am camera as well>as several Panasonic cameras that record to P2 card systems. A lso used heavily to convert higher->end HD formats into a high quality offline e diting format. Uses component recording, DCT
compression at approx. 7:1 (intraframe), 4:2:2 color sampling, 8->bit depth and up to 8 audio channels.
1080 formats record at 1280x1080, 720 formats record at 960x720. At 1080p, frame rates include>23.98, 24, 25 fps. At 1080i, frame rates include 25, 29.97, 30 fp s. At 720p, frame rates include
23.98, 24, 25, 29.97, 30, 59.94, 60 fps.
Source: Moviola
I agree that you want AIC not DV. AIC is a 4:2:0 codec so you will lose some quality, but it is your best option without buying FCP.
Message was edited by: AppleMan1958
Message was edited by: AppleMan1958

I would like to be able to edit MP4s in CS5. I can not open the file. What am I missing?

I would like to be able to edit MP4s in CS5. I can not open the file. What am I missing?

According to the publisher For GoSystem Tax, the 32-bit version of Internet Explorer 8, 9, or 10 is required. Which means it can't be accessed from an iPad. This seems weird. I would recommend you contact the publisher.

I can't open PDF files, can't open, update, or download Adobe Reader ( I had it until recently) and don't have an "edit options"

I can't open PDF files, can't open, update, or download Adobe Reader. (I had it until recently.) None of the "helps" seem to help. I can't even open Adobe Reader now.

Ignore the instructions about "edit options", to install Adobe Reader download the installer from http://get.adobe.com/reader/ and run the installer. Alternatively, a direct link for the latest version of Adobe Reader is:
http://ardownload.adobe.com/pub/adobe/reader/win/9.x/9.3.4/enu/AdbeRdr934_en_US.exe
The following article should help you set it up - [[opening PDF files within Firefox]].

Can't open CR2 files in photoshop and camera raw

This weekend I rented a Canon 5D Mark iii. I have downloaded the files and all of the thumbnails in camera raw say CR2 and when I try to open Photoshop does not recognize this product.
I have:
Photoshop CS4
Camera Raw CS4
Canon 5D Mark ii
I have checked my updates folder and all my updates are current. Do I need to upgrade to CS5 or is there a way around this?

Hi I recently had a problem opening CR2 files in PHotoshop cs4. I had to reinstall into a new computer, so obviously it installed the basic programme and not the updates.
After trying everything, even calling the help desk, there was apparently nothing that can be donw as they no longer support cs4.
I kept trying and found a you tube video, which i cant find again to add the link but i followed the link and with what I did earlier I can now open CR2 files in my photoshop cs4
I found the relevany update that I needed to install and downloaded it, camera raw 5.2 ( Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 5.2 update ) this is the one for the Canon 5d Mk2
After downloading it would not update the progeramme so I was in the same possition, but i noticed the files were there and i just needed to put them in the right place in photoshop so carried on looking for were to put the Plus In.
This led me to the video.
To the point.
Download the update and save to a location where you will remember.
open Adobe photoshop and go to "edit"
Them " Preferences "
then "General "
Then " Plus-Ins"
At the top you will see " Add Plug-Ins Folder " Check this box then navigate to the "win64" ( this is because mine is a windows 64 bit computer and the download is specific ) and Choose it.
Shut down photo shop and try to open a raw.
Bridge doesnt work for some reason but im going to keep looking.
Hope this works for you as well.

Protected mode message comes up and when I try to open files it says it encountered an error and to check online.. i can not open any files now

Within the past week I have been getting messages when trying to open pdf files " that its in protected mode and can not open"
I deleted adobe and reinstalled directly from Adobe.com and now I can not open any file with a message it has encountered an error
and will check online for solution. Please assist as no files will open now
This is details of error
Problem Event Name:    APPCRASH
Application Name:    AcroRd32.exe
Application Version:    11.0.10.32
Application Timestamp:    547e9779
Fault Module Name:    StackHash_147f
Fault Module Version:    0.0.0.0
Fault Module Timestamp:    00000000
Exception Code:    c000041d
Exception Offset:    77a011f1
OS Version:    6.1.7601.2.1.0.256.48
Locale ID:    1033
Additional Information 1:    147f
Additional Information 2:    147ff66574b08dc93180d912e60eb897
Additional Information 3:    c48b
Additional Information 4:    c48be403c52ec6c06778481aaa8948d8
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Can you open Adobe Reader by itself? If so, try to disable Protected Mode [Edit | Preferenes | Security (Enhanced)].

I can't open pages files from USB and iCloud due to : "The necessary file index.xml is missing".

I can't open pages files from USB and iCloud due to : "The necessary file index.xml is missing". Original file is written on iMac (2014) and saved to an USB stick and then transferred till macBook Pro (2009, Yosemite) for editing. Then I shared the files by iCloud but I am not able to open them on iMac again. Niether can I use the USB stick to transfer the edited files back. I'm running Pages '09 4,1 (923) on the macBook and Pges 5.5.2 (2120) on the iMac.
Håkan

Pages 5.5.2 is extremely incompatible with even other Macs let alone the vast majority of PC and MsWord users out there, so not a good idea to leap into the fire with both eyes shut.
After having done that to the first Pages 5 files, Apple has repeatedly done it to even the most minor point updates. Apple can't even anticipate its own erratic changes let alone what everyone else needs doing.
Peter

Satellite Pro P300 - After Truesuite update I can't open protected files

Hi,
sorry for my bad english but I came from Italy and here we don't have any forum who can resolve my problem.
I've got a Toshiba Laptop pro P300 with fingerprint reader. I use fingerprint to logon and protect some files, just for curiosity, it seemed cool...:|
The problem born when I recently update "truesuite access manager". Since I did the update I can't open protected files, I didn't read that I have to remove the protection before the updating (damn...), but these files are important for me and I have to open them again.
To resolve the problem at first I restore the system before the date of the update, to have the old version and open these files again, but all my fingerprints are deleted and I can't create new fingerprints because the pc says that it "can't open the sensor". I don't know what it means.
I thought that it needs some drivers, so I reinstalled truesuite access manager several times, I reinstalled BIOS, I've done the scan disk and the toshiba diagnostic, but the sensor still doesn't work.
I think that if I can save a fingerprint with the old version of the program I will able to open protected files again (and I will not protect them anymore) because only the old version of the program knows how to decrypt these files, but I don't know how to turn the fingerprint sensor on. Someone could help me, please?
Thank you so much!

The Truesuite update come from the Toshiba website. I can open the Truesuite program with my fingerprint but I can't decrypt files because it says that I don't have the correct "key of protection" or the "protection code keyAC 3000" of the file.

Some users can't open Excel files. It is trying to open it in Internet Explorer "An error has occurred. Please try again."

I have some users in my company that can't open Excel files from any document libraries on SharePoint 2010. The receive the error message "An error occurred. Please try again."  We don't currently use the Excel calculations services. When
a user opens an excel file they are prompted to either Read Only or Edit.
This affects less than 5 people in a large company. They have the Full Control permissions and have been able to open the files previously. There has been no changes made to the server either. I can't find anything that points to this in the
event viewer.
It doesn't matter if which computer that they try to open this up from either.   All computers are Windows 7 Professional with IE 9 and Office 2010 x64.
I can't find anything that points specifically to this exact error. None of the excel files contain pivot tables.    This one has me stumped.

I would make sure no one has open on machine / locked on machine (Would assume you checked this, but wanted to add)
Also would have assumed you restarted the machines (:))
Make sure the file security did not change (check to ensure no one changed the sercuity of the excel)
Make sure the version of excel is the same (Changing from 2010 back to 2007 affects the file, etc.. on convert) that no one converted and saved thus causing error in file.
Can they open other excel files?
It sounds like the excel file it self has changed if you cannot see issue in SharePoint logs.
If it is all SharePoint excel files - try deleting one persons access and readding them to see if that helps.
SharePoint has issues ;)

Can't open PNG files in Photoshop CS5...??

I'm seeing lots of threads with this problem but none of them seem to have an answer.
For some reason right now when I try to open a PNG file in Photoshop it just crashes. I end up with a neverending "hour glass".
I had all of my website project directories on a network share. As I'm no longer sharing all of these files with an office of people I decided to move all of these project files back to my own local machine. Ever since I've done that I can't open PNG files in Photoshop anymore.
Any information on what could have caused this, or more importantly, how to fix it would be greatly appreciated. Thanks!

I was able to edit PNG files just fine up until today, and the only thing I've done is move the files from the network share to my local hard drive.
Any PNG, large or small won't work right now. All of the other threads I see where people are talking about this say it's happening with their GIF files, too. I just tried one here and the same thing happened. From within Photoshop I did File -> Open, browsed to my image directory and the moment I clicked on one of the GIF files it locked up.
So yeah, I'm certain it's isolated to my machine right now. I just have no idea at all what could possibly be causing this. The other threads are mentioning netework shares, too, but usually still trying to open over the network. In my case it was working fine when I did it over the network, but now that I'm opening local files it's failing.

Can not open any files CS5 Win 7 64 bit

I can not open any files in Photoshop. I can open them in Bridge or LR. If I open a file in Camera Raw and try to go to Photoshop, PS opens and just sits there and looks at me as if I opened the program only.

Is this a new installation that has never worked, or is this a problem that has cropped up recently?
In any case, there are two things you can do that between them have a very good chance of getting things working for you.
1. As a diagnostic, click Edit - Preferences - Performance, and uncheck (disable) the [ ] Enable OpenGL Drawing setting, then close and reopen Photoshop. If this corrects the problem, then chances are good that your display driver needs to be updated. To do so, go to the web site of the maker of your video card (e.g., nVidia or ATI) and follow the links to the driver download that matches your hardware and operating system. When you've updated the driver and rebooted your system, re-enable the OpenGL Drawing setting (remembering to close and restart Photoshop) then re-test.
2. Clear all Photoshop preferences to standard defaults. To do this, press and hold the Control, Shift, and Alt keys IMMEDIATELY after cold-starting Photoshop from its shortcut or menu entry. If you're quick enough, it will prompt you. You'll need to go through all the preferences again to ensure any customizations you want are re-done.
Hope this helps!
-Noel

Some clients Can't open XLSX files in Libraries using template.dotx but can open xlsx files in libraries using template.doc

If I create a new library using any Excel/Word template - DOC, DOTX, XLS, XLTX and then upload a XLSX document (or docx) then some of my clients experience issues opening the document. My work around in the past has been to resave the document
as XLS or DOC. Interestingly Old Libraries (Libraries using template.doc) don't have a problem with xlsx or docx documents. (This only works because most of the clients experiencing the problem only open a few documents and we only have to
resave a few documents. I don't know why these clients have this problem though.)
We are now testing a new Terminal Server implementation. One with OpenOffice instead of Microsoft Office. We can't open xlsx files on new libraries but can on old libraries. (docx files are not a problem though) I found a couple of
work arounds.  One work around is to click on the down arrow by the document name and select "Edit in Excel" which fails, but then clicking on the document name after will then prompt you to Open/save the document. Clicking on Open
successfully opens the document in OpenOffice. (So rather tedious for the users but nothing has to be changed to make it work.)
The other option is to create a template from one of the libraries that is working and then use it to create a new library and save my documents to the new library. Then I'm prompted to Open/Save the xlsx documents in the library.  This
option is less tedious for the user but then I have to go through and recreate any libraries using template.dotx. Creating a new library using the standard Document Library option and selecting Word or Excel 2003 does not resolve the issue - it has to
be created from a template created from an existing library that works in the Terminal Server implementation.
My boss is opting for the latter option unless I can come of with an alternative that doesn't mean additional steps for the users. Training is an issue because most of the Terminal Server users are shop floor workers.
My question is, is there a patch or fix that addresses this issue or any other work arounds that would be less work?
Additional Info: Our Sharepoint implementation is the Enterprise version is installed but we do not have the Excel related Features activated (and these can't be activated due to licensing). I'm not sure if that matters or not but it is
a different configuration from how most SharePoint installations are configured. SP1 is installed. I have not installed any recent CU's. Versions I see in Patch Status screen include 14.0.6029.1 (primarily) with some additional features
reporting 14.0.6105.5, 14.0.6107.5, 14.0.6112.5 and 14.0.6114.5.
Nancy Forbes

We have tried a couple of additional things.
We uninstalled OpenOffice and are testing LibreOffice. I also installed CMIS from the SharePoint Administrator's toolkit, added the solution, and deployed it to my sites. The "Producer" feature is activated on the site I am testing with.
I created a new library and posted some docx, doc, and xlsx files to it. All files can be opened as Read-only from the Library list. The only way I have found that I can edit the files is to Open the Library with Explorer.   I then deactivated
the producer feature and tested opening the SharePoint documents from Explorer and it worked the same.
So am I misunderstanding what the CMIS Producer feature is for?
Nancy Forbes

Suddenly can't open .eps files in FW8

Hi all-
I suddenly can't open .eps files in FW8. Starts to open and then says "Internal error occurred" Text tool is also acting up. I think it may be related to one of the extensions I downloaded from the Adobe Exchange. Or, maybe it was something I did. Probably the latter. Either way, it seems like my FW8 has gotten corrupted. Ran spyware, adware, defrag, and virus scans. Even talked nice to my computer, but nothing has worked. I looked for patches or downloads on Adobe's site but there are none for FW8.
Anyway, I'm guessing my only option is to reinstall, unless someone out there has a better idea. If I do reinstall, does it erase everything? Meaning, will I lose all extensions and all the settings?
Thanks for your help!

Using Win XP Media center edition v 5.1 Service Pack 3. Been too afraid to upgrade to Vista. Probably about time to upgrade my FW.
I searched my entire machine for that file, both by file name and by all .txt files and could not find a "Preferences" file anywhere. Here's what came up under the FW directory path:
Thanks for your help, Heathrowe!
-Mike

Can't open .DNG files in Preview and others

I am using Adobe DNG converter OR Lightroom to convert .RW2 from a Panasonic Lumix 3 to .DNG
This works:
1. Working with files in LR
2. Use PanoMaker to create panoramas
3. Create HDR with Photomagix
This does not work
4. Open files with MAC OS X 10.4.11 Preview (Vorscha) even though thumbnails look ok.
It says (in German) that it can not open the file
5. View files in Houdahgeo - Adding GPS info works
5. Use Photomagico to creat slide shows - only see thumbnails at the bottom
I also played with the settings in Adobe DNG Converter and LR (Raw 2.4, 4.1, 4.6, 5.4, User...Linear...Not compresse) but it did not help.
I searched multiple forums, found the problem twice mentioned on the side but never resolved. One hinted that its a problem since 10.4.11
Message was edited by: schillab

Hi,
(1) I'd think that if Adobe makes a XYZ to DNG converter for MAC OS X the goal would would that the following can open such a DNG file
        (a) All Adobe Apps ..... it works ....... mission accomplished
         (b) The native DNG viewer in OS X which is "Preview" .... it does not work!!!
         Note: the above works if XYZ is Canons RAW. If it is coming from a Panasonic LX3 one is out of luck
(2) I just tried the above with LR 2.6RC and DNG Converter 5.6. Nothing has changed.
Anybody having an idea? work around?
Christian

I bought a canon EOS Rebel T5i. It came with photoshop elements 11. PS won't open my C2 raw files and says my camera isn't supported by the software I have downloaded 7.4 dng converter and I still can't open the files. What do I need to do?

I bought a canon EOS Rebel T5i. It came with photoshop elements 11. PS won't open my C2 raw files and says my camera isn't supported by the software I have downloaded 7.4 dng converter and I still can't open the files. What do I need to do?

You need camera raw 8.4 for your camera, if it’s Digital Rebel T5 EOS 1200D EOS Kiss X70. It is not compatible with PSE11; so it’s a bit odd if that software was bundled with the camera except that it will work with jpegs. I suggest you download and install the free Adobe DNG converter to convert your CR2 files to the Adobe universal Raw format and the DNG files will editable in PSE11(keep your originals as backups and for use in the camera manufactures software)
Mac download (.dmg file) click here DNG Converter 8.4
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

Can't open .ses file in Cool Edit 2.1

Similar Messages

Maybe you are looking for