Can't Open Skype on cellphones, we have to create ...

Can't Open Skype on cellphones, we have to create a new account?

on any android Cellphone, dosent any more the page to login, now shows create account.. why? what we have to if we have an account alredy..
Thanks

Similar Messages

Can't open Cards or Books I have previously created

I just upgraded to iLife 11 and now can't get into my previously created Cards and Books. Also, I tried creating a new card, but now can not get into that either. I seem to have all my Albums in tact, but can't open any of my Projects (although all are still listed). How to I get into existing projects?

IIf you forgot your restrictions passcode, you have to restore your devoce using iTunes and you will totally erase the device. There is no way around it. if by some chance you have a backup that does not contain the passcode that you can't remember, you can restore that backup to remove the passcode. Otherwise, restore as new.
You will have to download your eBooks again. If you are purchasing books for the iBooks store, most of those can be downloaded again at no charge as long as you use the same Apple ID that you bought them with - and as long as they are still available in the iBooks Store.

Hi. I have a Dell PC running Windows 7 64 bit. I have the latest version of Adobe Reader, It worked yesterday. Today I have job training to do that is due tomorrow morning and I can't open PDF files. I have to open a guide and read it and take a test

Hi. I have a Dell PC running Windows 7 64 bit. I have the latest version of Adobe Reader, It worked yesterday. Today I have job training to do that is due tomorrow morning and I can't open PDF files. I have to open a guide and read it and take a test tomorrow. I have deleted and reinstalled the application. I have rebooted. I have made sure my PDF's are associated with the program. Every PDF on my computer won't open and I get the same error message. It simply says Attempt to access invalid address. How can I fix this? Thanks.

Hi Don,
I have seen this issue fixed for some users by modifying the following registry key:
The key is "HKLM\System\CurrentControlSet\Control\Session Manager\Memory Management" MoveImages
Set the key to 1 instead of 0 then reboot the machine.
In case you still face the issue try the following registry key change:
The only thing you have to do is rename the following key at the REGEDIT, and everything will be fine !!
BEFORE:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.exe
AFTER:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.old
Note: Please take a backup of the registry before attempting this change.
Regards,
Rave

I can't open my iPhoto because i have to update it and i can't update it because i've downloaded from another account and it has all my pictures, how can i solve it ??

i can't open my iPhoto because i have to update it and i can't update it, because i've downloaded it from another account and it has all my pictures, how can i solve it ??

Log in from the other account.

I got the receipt no. 173039070909,however, I can't open the magezine which I have bought. What's the problem?

I got the receipt no. 173039070909,however, I can't open the magezine which I have bought. What's the problem?

Problem you have to fix with the publisher/developer.
Or, get iTS to refund due to content problem.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

Hi, I got iMac and I can not open file "doc" when I have downloaded from distance learning internet page. I have office program, but when I try to open file it shows: u1-assesment.doc uses a file type that is blocked from opening in this version.?

Hi, I got iMac and I can not open file "doc" when I have downloaded from distance learning internet page. I have office program, but when I try to open file it shows: u1-assesment.doc uses a file type that is blocked from opening in this version.?
I have tryed to change just extension from doc to docx, but it doesn't work. I am new user, please help

Consider the Mcrosoft Office:Mac forums as well:
Office for Mac forums
Here is an MS page that deals with that error message:
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/bs0811doc-use s-a-file-type-that-is-blocked-from/548ce159-8157-419e-9552-1789594fafe9

Hi, i have finish my professionnal website, now i just want translate it in several languages french,spanish,portuguese and english, did muse can do that option or did i have to create several pages or create other websites thanks

Hi, i have finish my professionnal website, now i just want to translate it in several languages french,spanish,portuguese and english, did muse can do that option or did i have to create several pages or create other websites because muse don't have this option now thanks

Hi there,
There is no option yet to localize the content in Muse.
If you would like to publish your site to business catalyst then creating different pages in the same Muse site is recommended.
Else, you can make a back up of this muse site and and create another site using this site, (save the same site with different name to another location) then open that one and edit text in site in another language, and then do the same for third language and so on.
Thanks.

Geotagging - how can I edit new places that I have previously created but with typos, errors etc? How do I delete a place I have set up?

Geotagging - how can I edit new places that I have previously created but with typos, errors etc? How do I delete a place I have set up? Then I could create a new, correct entry. I'm using iPhoto '09.

Is it OK to reply to my own question?? Thanks to the related posts that appeared AFTER I'd made the post above, I learnt about the 'Manage my places' item under the Windows menu. I felt a bit dumb not knowing this.
BUT it doesn't completely resolve the issue. The info shown in the EXIF (using opt-cmd-I) under Places has the place name I choose, but it is followed by a few other lines that are incorrect and do not seem to be anything to do with any data I can see under 'Manage my places'.
Can anyone explain where these other entries might come from, and how to edit them?

My Macbook all of a sudden can't open Skype, Word, Excel, Powerpoint and Entourage. I have done research and read that it has something to do with malware and viruses. Please help I feel like I have tried everything!

This started a few days ago, when I noticed skype would not open and keeps quitting unexpectingly. Now it's all of my microsoft office programs. I have read horrible things on the internet about creeps building some sort of 'backdoor' through Mircosoft Word and are now able to access my macbook. I want to feel safe again and I want to be able to use skype again. I think I will delete Microsoft office until I find/can afford a better version.
I have tried deleting and re-installing the programs, PRAM-ing my mac, doing the utilities organizing thing, and I downloaded 4 different scanners (Cleanmymac, VirusBarrier Express, Bitdefender Virus Scanner, and ClamXav) to help get rid of this and only one scanner found a small file that was harmful. I need some advice PLEASE!
Thank you for your time!

Elliottarian wrote:
Thanks MadMac0 I followed the instructions in Terminal for the link you sent and all my programs open again!
Sorry I'm just getting to this now, but a lot going on today in this front. There is now a "K" version of Flashback and perhaps more going on.
A couple of considerations you need to be aware of.
It's clear from the results of your testing that the reason you were infected is because your Java is out of date, so it's important that you keep all your software up-to-date going forward.
But even that won't protect you from this new "K" version as Apple has not released the patch to it yet, so I encourage you to disable Java in all your browsers and consider doing so for everything by opening Java Preferences (located in /Applications/Utilities/) and unchecking the box next to "J2SE 6.0" and any other box that might be checked. If you find that some application(s) you need must use Java, then you should enable it only to run that application(s).
We cannot be certain that what you did totally killed the Trojan, so your best bet would be to restore your Mac back to where it was before you were infected using TimeMachine. If you don't have a TimeMachine backup or cannot determine the date of infection, then your safest solution is this one:
Courtesy of Linc Davis:
I suggest you take the following steps immediately:
1. Back up all data to at least two different devices, if you haven't already done so.
2. Boot from your recovery partition (if running Mac OS X 10.7 or later) or your installation disc (if running an earlier version of the Mac OS), launch Disk Utility, and erase the startup drive. This action will destroy all data on the drive, so you must be sure of your backups.
3. Install the Mac OS.
4. Reboot and go through the initial setup process to create an account. Don’t import anything from your backups at this stage.
5. If running Mac OS X 10.6.x or earlier, run Software Update.
6. Restore the contents of all the top-level subfolders of your home folder except “Library” from the most recent backup. You can also restore the files in the Library folder, but don’t restore any of its subfolders; only the files contained in those folders, and only if they’re visible in the Finder. Don’t restore any hidden files or folders, no matter where they are.
7. If you’re running Mac OS X 10.5.x or earlier, disable Java in Safari’s preferences, and leave it disabled until you upgrade to Mac OS X 10.6.8 or later, including all available updates. The Java web plugin is unsafe to use under older versions of the Mac OS. Note: I’m not referring to JavaScript, which is unrelated to Java, despite the similarity in the names.
8. Change every Internet password you have, starting with banking passwords. Check all financial accounts for unauthorized transactions. Take this step only after you’ve secured your system in the preceding steps, not before.
9. Reinstall your third-party software from fresh downloads or original media, not from backups which may be contaminated. If you use any third-party web browsers under Mac OS X 10.5.x or earlier, disable Java in their preferences, as you did with Safari in step 7.
Of course, as of this morning you should follow my instructions for disabling Java and ignore his, at least until Apple gets that Java patch out.
Pay particular attention to Step 8 no matter what you decide to do.

Can't open Skype at all on Macbook Pro

I have been struggling with Skype for a long time on my Macbook Pro and wondered if anyone has any advice. When I try to open the application, it crashes immediately before I can even log in. This has been the behaviour for several versions of Skype now, so I am starting to think there is something on my machine which conflicts with it and the problem will not be solved by waiting for a future release of Skype.
Currently it is failing with version 6.0.60.2496 of Skype (downloaded today) on a MacBook Pro running Mac OS 10.8.2. The machine is a 2.53 GHz Intel Core 2 Duo with 4 GB of RAM, purchased in 2009. Exactly the same problem occurred in Lion, before I upgraded to Mountain Lion.
I have tried a number of steps to solve the problem, including:
* Removing the /skype folder from /Library/Application Support and the preference file from Preferences, uninstalling Skype, restarting in Safe Mode, downloading it again, installing and trying to open it
* Changing the settings in Text to Speech to a different voice
* Downloading an older version of Skype and trying to run that
Everything crashes instantly every time and I am unable to use Skype at all.
Skype support have told me there's nothing further they can suggest and they think it may be a conflict with my System fonts, but I am desperate for any advice from someone who has encountered (and hopefully solved!) a similar problem.
Many thanks in advance for any help you can offer.

Hi Katherine,
You'll need to save it to a different format to use it on a Mac. If you can still open them on the HP, that would probably be the easiest. Save them as a Mac compatible format such as .mpg. If that doesn't work, here is a converter you can try: http://www.squared5.com/

Can't Open Server Manager - don't have System Administrator Rights

Hi,
I am new to BPC
After i updated the support patch to BPC 7.5 MS SP3 , pack level 2
and Restart the server
Then Server Manager can't open again.
Error Message :
This ID (xxxxxx) don't have System Administrator Rights; you must log on with a user ID that has system administrator privileges
But I have logon the user which is used to install BPC
I have try to restart the service, but it is not working .
Any method reset it ? or solve it?
thx
John

Dear Kong Chong Shun,
From your information, I'm sorry I could not get several information. Did you upgrade your BPC Clients too, lets say BPC Administrators ?.
Kind Regards,
Wandi Sutandi

Can't open Project files... have latest FCP though

Hello, I have the FCP Suite 2 and it's updated. I got a Project file from a client and when I open it, it says something similar to 'can't open the project with this version of Final Cut'.
If i have the latest version of FCP how could this be? Will FCP open a Final Cut Express file?
Sorry i don't know the exact error message at the moment, I'm trying to figure this out before I get back to my office this evening (where the computer and file is) at which point I have to contact the client and tell him what's up.
And feedback would be great, thanks for your time. Will give better details this evening if needed
-Monty

I installed the update... FCP still launches as 6.0.1 . So I tried downloading the 6.0.2 updater (Pro Applications Update 2008-01), and as I enter my serial to access the file it lead me straight to the Pro Applications Update 2008-02 download which i just tried installing.
Any quick ideas would be great, I've put the client on hold til tomorrow. I did do a search here and though it wasn't clear, it seemed like someone was recommending a complete system re-install. I hope that's not the situation, thanks for your time!
-Monty
PS-If it has to be a new install of everything, exactly what do i need to make FCP update to 6.0.3? Just update FCP through the Software Updater then install the Pro Applications Update 2008-02? Or are there other update I need to get manually, thanks.
Message was edited by: TheMonty

I can't open email attachments on my ipad that have an arrow on them. Those with a W open just fine. Also can't open jpeg files-- they also have an arrow on them. Any ideas?

Hi, I can't open email attachments that have an arrow on them. Attachments with a W (windows) open just fine. I have an ipad 3. Thanks for any ideas.

Attachments that show as a bold downward pointing arrow in a gray rectangle in a dotted box have not yet been downloaded to your phone (usually because they are large). Tapping such an icon should download the attachment if you are connected to the internet and your mail server is reachable. Once downloaded, they should appear as normal (which would depend on the attachment type).
This is the "Using iPhone" forum, so I said phone, but the same applies on an iPad.

I suddenly can not open pdf files. I have had Adobe Reader Xl and just ran into this problem

I have had adobe reader xl for some time and suddenly can not open a pdf file. I received an email yesterday with a pdf attachment which I can not open. What could be my problem?

Hi Pat, My operating system is Windows 7, Home Premium Service Pack 1. My email client (email Provider is Cox Communications - Cox.net).
Can not in my post means I tried to open a pdf attachment to a email. I received nothing happens. I do not get a blank screen or any messages. Nothing Nothing happens at all. I can click several times and get no response.
I did discover that by clicking on the Adobe Icon on my deskt topi get an Adobe box containing "Do you want to allow changes to your computer. I click Yes and get to my computer where I can find the above mentoned attachment which I think I had previously saved. I then get the attachment whick I can print. This may be printing from my hard drive - I am not sure. I think I could go through this procedure every time I want to open a atachment but it seems a long way around.
Any help you can give me would be appreciated. I have thought about removing Adobe and reinstalling. Maybe there is a corruption to my Adobe file.
Jim

HT1414 how can i open my phone when i have forgotten my password ? thank you.

hello i have forgotten my password & now i have got a red band saying iphone is disabled , how can i open my phone now when i have connected it to any pc yet so i can't go through itunes. thank you.

Wrong passcode results in red disabled screen

Can't Open Skype on cellphones, we have to create ...

Similar Messages

Maybe you are looking for