Can't open song file!

I have a song that i've been working on, but it will not open up anymore. I get the message: "The application GarageBand quit unexpectedly..." and the option to close, report, and reopen. When I hit reopen, garageband opens up and all the tracks are visible, but i am unable to do anything within garageband as it basically behaves like it is frozen. The other projects I have open up without a problem. Any guesses as to what's going on? Thanks

Yes, I tried both the repair utility and deleting the preferences, but still no luck. Is there any way to extract the midi info from the file and open it in a different program, such as Cubase?

Similar Messages

Garage Band Problem: I can not open my existing files on Garage Band. They appear in a light gray. I can only open recent files. How do I open the existing files?

I would like help opening my existing files in Garage Band? I recorded 22 songs earlier this month which I want to edit, but I can not open these files.
The only files I can open are the more Recent files.
Please advise me what to do?
Thanks,
Bonnieta

It's not an apple solution but you can try MailRaider by 45 RPM software. I have not used it personally but it was one of the hits that came up when I did a google search for .msg on Mac.
Hopefuly the link posts but if not then just head over to macupdate and do a search for MailRaider
http://www.macupdate.com/app/mac/31845/mailraider
Hope this helps.

I can't open any file

Hi every one,
GarageBand does not open any file.
From starting screen
if a double clic on any of my previous song i get an error message
impossible to open you file ..
Even if i can create it a few minutes before ..
as soon as i record it ..
i am unable to open it any more ..
i always get this error message
"can't open your file"
Has anyone an idea about what to do to fix this strong bugg ??
Thank you so much for your help

How many programs do you have open. Usually your machine will use the disk as scratch memory, but your program may be needing internal memory and it may not be able to address it. Close some programs backwards as to how you opened them and see if you can free some memory. If you still have a problem, I would close everything and restart opening that program first. Jerry

Can't Open Songs

So I reinstalled my OS the other day and now I cannot open about half of my GB songs. I had saved them from the other OS install. I have GB2 with Jampack four, I am fully updated and all the software I have is installed.
I just get an error message that states:
"Can't open Song"
This song requires a newer version of Garageband
I never had a newer version when I wrote those songs.

Hi Schneb,
My songs were composed entirely of loops and hand -programmed sequences using factory voices. No MIDI.
OK, requesting "Show Package Content" (that's sly - didn't know you could do that!) reveals three elements:
Freeze Files (folder)
Media (folder)
projectData (file)
'Freeze Files' contains 12 elements:
- classes.nib
- info.nib
- keyedObjects.nib
plus nine .aif files with names like
- "Dev02Inst...075510.aif"
- "Dev02Trac...1584937.aif"
etc.
'Media' is empty
Can you tell anything from that? Never having opened one of these before, I don't know what's meant to be in there!
Incidentally, when I try to open one of these, GB produces a blank 'processing' window (with the horizontal barber's pole), which never goes away, but curiously, GBs menus remain active. I can open another song while GB appears to be processing my first 'open' command, and if I do that (with a new song, not one of the recovered ones), the hanging window simply disappears, and the new song is launched correctly... Weird.
Trying to open one of the recovered songs from within GB makes no difference: same hanging behaviour.
Cheers,
Colin

I can not open the file in Photoshop...

I can not open the file in Photoshop after formattatto pc.
I get the following error "could not complete your request because there is an error in the program
Please me!
Thank you

Version CS3
Adobe DNG Converter and Camera Raw 4.6 update
6.2MB
10/10/2008
Camera Raw 4.6 update
3.5MB
10/10/2008
Camera Raw 4.5 update
3.5MB
7/28/2008
Adobe DNG Converter and Camera Raw 4.5 update
6.1MB
7/28/2008
Adobe DNG Converter and Camera Raw 4.4.1 update
5.4MB
4/10/2008
Camera Raw 4.4.1 update
3.3MB
4/10/2008
Camera Raw 4.3.1 update
3.3MB
11/15/2007
Adobe Photoshop 10.0.1 update for Adobe Photoshop CS3
72.8MB
11/15/2007
Adobe DNG Converter and Camera Raw 4.3.1 update
6.1MB
11/15/2007
Adobe DNG Converter and Camera Raw 4.2 update
5.9MB
9/13/2007
Camera Raw 4.2 update
3.2MB
9/13/2007
Camera Raw 4.1 update
3.2MB
5/30/2007
Adobe DNG Converter and Camera Raw 4.1 update

I can not open adobe files. mainly ones that end in doc. I purchased the 19.99 to convert .doc files

I can not open adobe files that end in .doc. I purchased the 19.99 to convert doc to pdf and I still cant open. I get an error reading.

Hi,
Which Adobe Service did you purchased?
If you have purchased CreatePDF please visit: https://createpdf.acrobat.com/SignIn.html
Sign in with your Adobe ID and password, and then convert your word doc into PDF.
Please let me know if that works.
If you have Adobe Reader, you cannot convert .doc file to .PDF by drag and drop.
~ Aditya

Can't open CR2 files in photoshop and camera raw

This weekend I rented a Canon 5D Mark iii. I have downloaded the files and all of the thumbnails in camera raw say CR2 and when I try to open Photoshop does not recognize this product.
I have:
Photoshop CS4
Camera Raw CS4
Canon 5D Mark ii
I have checked my updates folder and all my updates are current. Do I need to upgrade to CS5 or is there a way around this?

Hi I recently had a problem opening CR2 files in PHotoshop cs4. I had to reinstall into a new computer, so obviously it installed the basic programme and not the updates.
After trying everything, even calling the help desk, there was apparently nothing that can be donw as they no longer support cs4.
I kept trying and found a you tube video, which i cant find again to add the link but i followed the link and with what I did earlier I can now open CR2 files in my photoshop cs4
I found the relevany update that I needed to install and downloaded it, camera raw 5.2 ( Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 5.2 update ) this is the one for the Canon 5d Mk2
After downloading it would not update the progeramme so I was in the same possition, but i noticed the files were there and i just needed to put them in the right place in photoshop so carried on looking for were to put the Plus In.
This led me to the video.
To the point.
Download the update and save to a location where you will remember.
open Adobe photoshop and go to "edit"
Them " Preferences "
then "General "
Then " Plus-Ins"
At the top you will see " Add Plug-Ins Folder " Check this box then navigate to the "win64" ( this is because mine is a windows 64 bit computer and the download is specific ) and Choose it.
Shut down photo shop and try to open a raw.
Bridge doesnt work for some reason but im going to keep looking.
Hope this works for you as well.

Can't Open any files in photoshop CS3

I can not open any files in Photoshop CS3. It has been working fine. I was using camera raw and did not open the file and now can't open any file in photoshop. I reinstall it photoshop and it did not work. I reinstall install window xp worked fine until I tried camera raw. Canon (xti) Only cs3 is on the computer now

reset the preferences per the faq?
http://www.adobeforums.com/webx/.ef4a07f/1

Hi. I have a Dell PC running Windows 7 64 bit. I have the latest version of Adobe Reader, It worked yesterday. Today I have job training to do that is due tomorrow morning and I can't open PDF files. I have to open a guide and read it and take a test

Hi. I have a Dell PC running Windows 7 64 bit. I have the latest version of Adobe Reader, It worked yesterday. Today I have job training to do that is due tomorrow morning and I can't open PDF files. I have to open a guide and read it and take a test tomorrow. I have deleted and reinstalled the application. I have rebooted. I have made sure my PDF's are associated with the program. Every PDF on my computer won't open and I get the same error message. It simply says Attempt to access invalid address. How can I fix this? Thanks.

Hi Don,
I have seen this issue fixed for some users by modifying the following registry key:
The key is "HKLM\System\CurrentControlSet\Control\Session Manager\Memory Management" MoveImages
Set the key to 1 instead of 0 then reboot the machine.
In case you still face the issue try the following registry key change:
The only thing you have to do is rename the following key at the REGEDIT, and everything will be fine !!
BEFORE:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.exe
AFTER:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.old
Note: Please take a backup of the registry before attempting this change.
Regards,
Rave

OneNote recordings "We're sorry, we can't open the file because it is in use by another program."

Constantly, OneNote breaks and screws up my recordings that are synced with my lectures. It is such a fragile process and very frustrating. As soon as I'm done recording, I press stop. When I test the recording, it says, "We're sorry, we can't open
the file because it is in use by another program." I just recorded and then stopped it. If i close and reopen OneNote, it says, "oneNote is cleaning up from the last time it was open." And the recording still says it's in use by another program.
I've even restarted the laptop and it still won't open. The only way i could salvage the file is if I copy and paste it into another folder, and then it will open through windows media player, but all the live syncing with my notes are gone. Where are these
files stored? If I could save the sound and find the file/format that holds the syncing data again, I could work around this. They are no where to be found on my computer. Other forums give locations, but my folders are empty. Some other recordings work and
sync nicely, but I have still lost many recordings to this error. However, if I play a file and then close it without stopping playback, that file, too, will now be unusable. It will be stuck as "We're sorry, we can't open..." no matter what i do
and again i have to copy/paste it into a new folder and then move it back. I had the same problem on my last laptop. I record in Windows Media Audio 10 Professional at 192 kbs, 48 kHz, and stereo CBR. I need the high quality because the lecturer is too quiet.
It seems to happen when I record long lectures, 45 min+. Shorter recordings tend to work fine.
Please help, this would make note taking so much easier.

A bit of a confusion on my part;
Now we have created these REPORTS using Basic Crystal Report 10.5, which comes bundled with Visual Studio 2008 and .Net Framework 3.0. Now on our machines, we have never experienced any issues.
Going by the above, you should have references to CR assemblies of version 10.5.3700 only. No other references.
Now, looking at this paragraph:
BUT on the DEV server (web server) which has .net Framework 3.0 and in its GAC its has CRYSTAL DLLs version 11.5 (required to create an Object of ReportClass and its related functions) ; sometimes we get the following error while exporting crystal report to pdf:
I wonder what runtime was deployed to the server. E.g.; if you are using CR 10.5, your assemblies will be 10.5.3700 and you should be deploying the following runtime (depending on 32 bit / 64 bit, etc.):
CRRedist2008_ia64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255262008E/CRRedist2008_ia64.zip
CRRedist2008_x64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255272008E/CRRedist2008_x64.zip
CRRedist2008_x86.msi
https://smpdl.sap-ag.de/~sapidp/012002523100009351342008E/CRBasicVS2008_redist_x86.zip
One way to check on what is actually loading is to use the [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility.
- Ludek

Protected mode message comes up and when I try to open files it says it encountered an error and to check online.. i can not open any files now

Within the past week I have been getting messages when trying to open pdf files " that its in protected mode and can not open"
I deleted adobe and reinstalled directly from Adobe.com and now I can not open any file with a message it has encountered an error
and will check online for solution. Please assist as no files will open now
This is details of error
Problem Event Name:    APPCRASH
Application Name:    AcroRd32.exe
Application Version:    11.0.10.32
Application Timestamp:    547e9779
Fault Module Name:    StackHash_147f
Fault Module Version:    0.0.0.0
Fault Module Timestamp:    00000000
Exception Code:    c000041d
Exception Offset:    77a011f1
OS Version:    6.1.7601.2.1.0.256.48
Locale ID:    1033
Additional Information 1:    147f
Additional Information 2:    147ff66574b08dc93180d912e60eb897
Additional Information 3:    c48b
Additional Information 4:    c48be403c52ec6c06778481aaa8948d8
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Can you open Adobe Reader by itself? If so, try to disable Protected Mode [Edit | Preferenes | Security (Enhanced)].

Updated to latest ACR 6.6 but still can't open CR2 files from Canon Rebel XSi

I updated to latest version of Adobe Camera Raw 6.6 but still can't seem to open my CR2 files in Photoshop. Can't open them in Lightroom either, no preview in Bridge or OS.
I'm running OS 10.7.2 and Photshop 12.1 x 64 which is CS5.1 I suppose.
I've downloaded Canon's EOS utility hoping that would somehow do something as well but nothing.
The images were shot on Canon Rebel XSi which is certainly supported by the newest version of ACR. So I have no clue as to what's happening... I previously downloaded these images onto my old laptop about a year ago and everything was fine, however now I'm not even getting a preview in OS. Do I have to revert to an older version of ACR (perhaps the same one I used originally?) to open these files again? These files have been stored on a hard drive, so I'm not downloading them directly from the camera-again, this probably has nothing to do with it but not sure what to do. A lot of the posts I've seen recommend downloading the latest version of ACR to fix the issue, but again I've done that and as a matter of fact the camera (Rebel XSi) has been supported for some time now...
In OS, when the image is selected no preview:
Lightroom error:
Bridge, no preview:
Photoshop error:
Ideas, suggestions?
66 views on this discussion so far and no replies...
Please help.
Thanks in advance,
Arthur

Something appears to be wrong with your files.
Are most of your images approx. 3.7 MB?
This is very small for a 12 MP image.
If you go back to the original file on your laptop, what is the file size?
Also the fact that the Mac OS is not showing the preview is unusual.
Perhaps these files got corrupted when they were moved to your new computer.
Can you open these files OK on your old laptop?
Is the OS showing the previews on your old laptop?
Also compare the file sizes between old and new computer.
Have you tried repairing your permissions?
Try Disk Utility in your Macs Applications - Utilities - Disk Utility to see if this helps.
Good Luck!

I can't open pages files from USB and iCloud due to : "The necessary file index.xml is missing".

I can't open pages files from USB and iCloud due to : "The necessary file index.xml is missing". Original file is written on iMac (2014) and saved to an USB stick and then transferred till macBook Pro (2009, Yosemite) for editing. Then I shared the files by iCloud but I am not able to open them on iMac again. Niether can I use the USB stick to transfer the edited files back. I'm running Pages '09 4,1 (923) on the macBook and Pges 5.5.2 (2120) on the iMac.
Håkan

Pages 5.5.2 is extremely incompatible with even other Macs let alone the vast majority of PC and MsWord users out there, so not a good idea to leap into the fire with both eyes shut.
After having done that to the first Pages 5 files, Apple has repeatedly done it to even the most minor point updates. Apple can't even anticipate its own erratic changes let alone what everyone else needs doing.
Peter

Error message: "Dreamweaver can't open .jpg files"

I'm using DW 8, and I have installed the 8.0.2 update. I'm
having trouble inserting certain JPG images into a site. I get an
error message pop-up that states "Dreamweaver can't open .jpg
files". It will allow me to insert some jpg files, but not all of
them. I've tried drag & drop and going through the Insert menu.
The files are not large at all. Doesn't appear to be any problem
with png's or gif's. It's incredibly frustrating. Anyone have any
suggestions? TIA.

> why was i taught that all my web images need
> to be in 72dpi if it doesn't really matter?
most people suggest 72 because it was an old standard with
the early
macintosh DTP programs. For web use it's easier to
standardize on it because
when you make an image, you have to put ~some~ number in the
resolution box
and it might as well be 72 as any other number. It simplifies
moving image
files around in different applications if they are all the
same resolution.
For display in a browser, these will all have the same file
size and display
size in a web page:
600x600 pixels at 1dpi
600x600 pixels at 72dpi
600x600 pixels at 6000dpi
It's when they are used in other applications or when a
direct url like
/photos/1.jpg is printed out that they may display in the
resolution, not
the pixel dimension.
I came across a page once where the designer always saved his
images with a
resolution of 6000 dpi or some other odd number because he
thought that if
people dragged the image off the page to save it- most of
them wouldn't be
able to resize it. or some other idiot reason maybe.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Can't open .jar file, nothing happens when I click, MAC OS 10.6.8

Hello,
I can't open .jar file, nothing happens when I click on the .jar file.
I have MAC OS 10.6.8
The thing it, I have desktop application that I'm building on Netbeans and when I compile and deploy it... it runs from Netbeans folder where I have all the files but copying the .jar on the desktop. It says "The Java JAR file "blablabla.jar" could not be launched check the Console for possible error messages"
Any idea or solution will be appreciated.
Thanks in advance
Charles

These are Java files. http://www.java.com/en/ is where you can get the latest Java for your operating system. If your Java files need an older version of Java, there are instructions on the web to downgrade Mac Java, but it is difficult, and poses security issues.

Can't open song file!

Similar Messages

Maybe you are looking for