Can't open sountrack, using third party audio driver

I'd never had problem with STP before, but than i don't use it to often. I can openthe program using built in audio, but when i try to open the program using my Lexicon i-onix U82S the program starts and after it shows the default startscreen it quits.
I have everything updated. Does this sound familiar to anyone?

I have the same problem with SwiftKey and skype on ipad. I'm able to send messages doing a trick but it's a bit annoying. You can tap on the text field so the keyboard comes out, flip the ipad between vertical and horizontal, tap anywhere so the keyboard disappears and then tap again on the text field. The send button will show up.
Not ideal at all but at least you'll be able to send messages until the issue is resolved

Similar Messages

Can't send messages using third-party keyboards

Hello all - I'm using Skype for iPad on iOS 8.1.. I've decided to install Swiftkey keyboard and since I've done that, I've noticed that I can't send messages. After writing them down, "send" button doesn't show up, until I switch back to default iOS keyboard.
Have you seen this issue?
Thanks,
Daniel.

I have the same problem with SwiftKey and skype on ipad. I'm able to send messages doing a trick but it's a bit annoying. You can tap on the text field so the keyboard comes out, flip the ipad between vertical and horizontal, tap anywhere so the keyboard disappears and then tap again on the text field. The send button will show up.
Not ideal at all but at least you'll be able to send messages until the issue is resolved

Using third party JDBC driver gives error

In our project , we have to make a call to ingres database. For that we are using JDBC driver from Caribou lake Software. The application works fine when we execute in a stand alone JVM. But we get the following error if we load and try to run within JServer
Unable to instantiate packet driver java.sql.SQLException: socket connection: io error - Unsupported VC socket option
Is it possible to use other JDBC drivers inside JServer ?
Thanks

Thanks Jim, yes a custom url - that's what i want to do - like in jdev. Did you mean the "Custom URL" on the "Oracle" tab in sqldev - this is for the oracle database jdbc driver only - to let you do stuff other than just host and port and sid/service - so I can not use that. But i do want to set up a generic jdbc url - i want to say "use this driver class" with "this url" - I can do it in jdev - since a lot of the code base is shared/similar i expect to be able to set it up in sqldev also - also i think oracle products should at least support other oracle products. I guess this is an enhancement request for the sqldev development team then. Ta Nathan.

Third party Audio plugins don't work here

I'm wondering if someone is able to use third party Audio plugins (like Waves, Sonnox, Sonalksis, etc.) in FCPX. I can't. I have them for Logic and I can see them in FCPX, but if I try to use them I encounter various issues (settings not saved, FCPX crashes, and so on...).
Only Logic plugs work fine

There are NUMEROUS of issues with third pty AU's in FCPx. I have reported many of them. Settings not getting stored, crashes etc etc etc...
Plugs that work perfectly in Logic Pro....
AU integration in FCPx is highly erratic. Unfortunately.
You also wanna be VERY careful when using .CAF files in FCPx which have more than two channels of audio. Distortion etc... are bound to happen unless you take appropriate measures and disable channels not pertaining to stereo.

Compressor Audio plug-ins (can you add third party audio plug-ins?)

Compressor Audio plug-ins
Can you add third party audio plug-ins? Just need a simple audio compressing/mastering solution for a lot of non-technically minded producers. So trying to avoid using soundtrack.
cheers
steve

Hi B
Really sure You are looking into Your "user" folder ?
In this there is a folder with in my case "my account" eg "Bengt"
in this ther IS a library folder
and in this ther should be an iMovie folder. If not I would make one
and into this put a folder "Plug-ins" and in this put Your plug-ins.
Restart Your Mac and open iMovie and see if it found the new plug-ins.
Yours Bengt W

How can i telnet or get access to other LAN members in LAN without using third party software?

I have admin access to the main router in our LAN, so how can i telnet or get access to other LAN members in LAN without using third party software?
its linksys3500 router and i login as admin using the gateway address in address bar..
i want to access the c drive of my colleague in same subnet in same office and i know his ip address.but he not configured telnet accept request.so without it how can i open his telnet port and access him

I think you are using the wrong terminology. You can browse the hidden share of any pc if you know the ip and have a valid user account on the pc by typing in the following \\computername\c$ or \\ipaddress\c$ . It should prompt you for a user account. You may have to allow this through the windows firewall (or disable it completely).

I have admin access to the main router in our LAN, so how can i telnet or get access to other LAN members in LAN without using third party software?

I have admin access to the main router in our LAN, so how can i telnet or get access to other LAN members in LAN without using third party software?
its linksys3500 router and i login as admin using the gateway address in address bar..
i want to access the c drive of my colleague in same subnet in same office and i know his ip address.but he not configured telnet accept request.so without it how can i open his telnet port and access him

Duplicate post.

Can not receive emails from third party email accounts

Recently I started working for a small business which has small business server 2011 and exchange 2010 installed. Before I started there were eight user accounts and they all have unlimited email access. I created a few users through sbs AD and also from
exchange console a week ago. Unfortunately none of them can not receive emails from third party accounts. they all can receive internal emails and also can send mails to any email accounts internally and externally.
This is a night mare for me as new users are having trouble with communicating via mails. I have tried all the methods and now thought of posting this issue on tech net. Please help me on this!!
Thanks a lot!!
Sammy

Checklist for testing inbound email problems, I am assuming outbound emails works ok.
1. Check Port 25 forwarding on all modems routers/firewalls
2. MX Record is created and pointing to the correct Public IP Address, use MXToolbox.com to verify MX Record and test SMTP flow. Also Verify your public IP has not changed, use whatsmyip.org to check you public IP
3. If using POP Connector Service, make sure POP accounts are created properly
4. If using a 3rd party spam host, make sure they forward email to correct public IP address, use step 2 to verify your public IP.

How can I install OSX on a new third-party hard drive in my Macbook Pro?

I'll start off by saying that I bought my MBP (Mid 2009, 13 inch) used two years ago, and the seller never thought to mention that he had installed a third party hard drive not long before selling it to me... First problem.
Anyway, the hard drive crashed. I'm installing a new hard drive, but I'm worried about getting back to having Mountain Lion. I'm confused by the process - Some say I can start by ordering a retail copy of Snow Leopard on Amazon, some say I need the OS disc that originally came with the computer (which obviously I don't have), and some make it seem as if there's a special version of Snow Leopard I need to order from the Apple store?
Help.

There is no special version of Snow Leopard (other than what ships with a Mac of that vintage). There is a regular retail version. It is a good idea to have a copy.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
After you install the new hard drive boot the computer from the OS disk, and install OS 10.6.
If you want a more recent OS, sign in to the App Store - use the same ID and password you have used here.
There you can download Yosemite, it's free.
I assume your MBP meets the requirements for Yosemite. If it does not, or if you want an earlier OS than 10.10, you should be able to find it at the App store.

How to do XMLDSig using third-party JCA providers?

Hi all,
Can anyone please let me know how to do XMLDSig using third-party JCA providers? The Sun XMLDsig documentation says that "A JSR 105 implementation SHOULD use underlying JCA engine classes, such as java.security.Signature and java.security.MessageDigest to perform cryptographic operations", but it doesn't say how to define the JCA provider programmatically. I don't want to change the Providers order in the security.properties file.
Do we need to make any changes in the JCA provider classes to work with XMLDSig and XML encrypt?
I'd appreciate your help.
Joe

How to identify whether the third party app has registered URL scheme or not. I also send a request mail to the third party app developers regarding URL scheme, but there is no reply from them.

Convert word document in PDF,e pub,by using third party dll in Sharepoint designer workflow 2013?

Hi,
I want to convert word document to PDF, EPub, by using third party (.dll).
In SharePoint designer workflow in 2013.
So that I have question, Can we Install third party (.dll) in SharePoint workflow Designer for conversion?
Means I have created one simple application conversion of word to e Pub, PDF, Image by using (Spire.doc dll) in Visual Studio.
So this same conversion I want to work in SharePoint designer workflows?
So anybody has any solution then please provide me.
Thanks,
Samadhan

it might be worth looking at these CodePlex steps, that plug directly into the Word Automation Services.
http://sp2010wordautomation.codeplex.com/
It'll provide you with a configurable step like the below that should help you achieve your aims
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

How to use Third Party DLL in Adobe Illustrator Plug In

Hi Everyone,
I want to design plug-in for Adobe illustrator CS6(64 bit). As first step I am referring sample plug ins from ../SDK/SampleCode. I am not getting how to use third party DLL in plug in.
Please let me know how to refer C# DLL in illustrator plug in.
Thanks in advance.

There's no C# API for the Illustrator SDK, so your plugin must be C++ at the very least. That said, you can probably write a bridge if you need to call out to a C# library/DLL.

Using third party jars with Oracle Business Rules

Hi
I am working on Oracle AS 10g release 2.
We are using Oracle Business Rules in integration with Oracle BPEL.
While using third party jars however, Oracle Business Rules end is facing errors.
Error during unmarshallingProvider com.sun.xml.bind.ContextFactory_1_0_1 not found
oracle.classloader.util.AnnotatedClassNotFoundException:
Missing class: com.sun.xml.bind.ContextFactory_1_0_1
Dependent class: javax.xml.bind.ContextFinder
Loader: oracle.xml:10.1.0_2
Code-Source: /D:/oracleasr3/lib/xml.jar
Configuration: <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in D:\oracleasr3\j2ee\home\oc4j.jar
Can anybody help in figuring out where Jaxb jars(3rd party jars) are to be kept so that OAS access it?
We tried using the applib folder to load the jars but we are getting class loading errors.
When new instances are created, class loading is not happening.
Pls help.
Thanks
Kavya

Are you using Application Server Release 3 or Release 2? There are different versions listed in your mail.
I think you probably want to add this as a shared library via EM and then import the shared library to your application with the application's xml config files.

Using third party tool to initiate a Forte batchprogram

Hello Forte Users,
Our company has acquired a software product called Maestro. It's a
production scheduling facility that manages tasks for batch mode execution.
We would like to know if anyone out there has had any experience using this
product with Forte. One recommendation that we discussed was to have
Maestro start a script on Escript to communicate to an agent that would
start the batch process at a specified time. Has anyone done something
similar or can offer any suggestions ?
Thanks in advance,
Jean Mercier
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Jean,
We use Maestro for all our scheduling scripts. To start\stop the
environment and start\stop applications. We create a shell script that uses
escript to start/stop applications. Maestro just calls the shell scripts
and monitor it for completion. I think you have to write the shell script
in a standard way to return an error if it does not finish properly. Here
is an example:
#!/bin/csh
source /appls/forte/fortedef.csh
$FORTE_ROOT/install/bin/start_nodemgr -fm "(x:300000)" -e TR2ProdEnv
ps -fu forte | grep -v grep|grep nodemgr>/appls/forte/production/scripts/KBB
set KBB=/appls/forte/production/scripts/KBB
if (-z $KBB) then
exit 1
else
exit 0
endif
Hope this helps.
ka
Kamran Amin
Forte Technical Leader, Core Systems
(203)-459-7362 or 8-204-7362 - Trumbull
[email protected]
From: Jean Mercier[SMTP:[email protected]]
Sent: Monday, April 12, 1999 10:36 AM
To: Forte-Users (E-mail)
Subject: Using third party tool to initiate a Forte batch program
Hello Forte Users,
Our company has acquired a software product called Maestro. It's a
production scheduling facility that manages tasks for batch mode
execution.
We would like to know if anyone out there has had any experience using
this
product with Forte. One recommendation that we discussed was to have
Maestro start a script on Escript to communicate to an agent that would
start the batch process at a specified time. Has anyone done something
similar or can offer any suggestions ?
Thanks in advance,
Jean Mercier
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Using third party keyboards in native Apple apps on iOS 8

Hello,
I have an iPhone 5S, running iOS 8(and recently installed 8.0.2). I was excited about getting to use third-party keyboards, but for some reason it is not working for me. For whatever reason, I can use these keyboards (I've tried many, all to the same effect) in other apps such as Chrome or Facebook, but on any of the native Apple apps (Notes, Reminders, but especially Messages and Mail where typing is most needed) I am unable to select them. In fact, the little globe you click and hold to make the different keyboards come up isn't even on my keyboard. I've looked around a little and tried some fixes (uninstalling and reinstalling, deleting all other keyboards, restarting the phone, turning off AssistiveTouch, etc.) but have had no luck. Has anyone else experienced this, and more importantly, has anyone found a solution? I was hoping the 8.0.2 might address it but nothing has changed.
Thank you!

I'm having the same issue. IPhone 5S has third party keyboards working in safari but not other apps (8.02). IPad with 8.02 has them working everywhere. Any ideas?

Can't open sountrack, using third party audio driver

Similar Messages

Maybe you are looking for