Can`t open T-Code HU02

Dear Gurus
Is there any possibilities to open transaction codes HU02, with IMG configuration: "HU unique identifications for number ranges" not active?
I really appreciate your helps
Thanks & Regards
Christian

Hi Ramana
I try to explain the chronology of my requirement
My company is implementing Handling Unit Management for tracking gas tube.
I use HU02 transaction to pack gas tube into handling unit, as far as i know, the configuration "Unique HU Identification" must active to open HU02 transaction.
When the configuration is active, there are issues from our user, they cannot reverse Post Good Issue, with message "HU Material Posting inconsistent", then its decided to un-active the configuration. The problem is, when the config is inactive i cant open the HU02 transaction, which means i cannot do packing gas tube into HU.
Is there other ways to pack material into HU without HU02 transaction? or is it possible to access HU02 with configuration "unique HU identification" is inactive?
Any comments and suggestion is highly appreciated.
Hi Frenchy
Thanks for your attention and reply in my thread,
Thanks & Best Regards
Christian

Similar Messages

Can not open any open any web pages. Receive the following error message (Error code: sec_error_library_failure)

I can not open any websites using Mozilla browser. I have attached a screen shot of the error message that I receive. You will also find it below: .
Secure Connection Failed
An error occurred during a connection to www.google.com. security library failure. (Error code: sec_error_library_failure)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem.
This error appears on all pages that I try to browse to. All other browsers work fine on my computer.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
'''If Firefox is open,''' you can restart in Firefox Safe Mode from the Help menu:
* Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
'''If Firefox is not running,''' you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".
;[[Image:SafeMode-Fx35]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

The operation can't be completed because an unexped error occurred (error code-50). This appears when I'm copying a file to the drive and then I wasn't able to edit to my drive. Then this morning I can't open my project file. What to do?

Message: The operation can't be completed because an unexped error occurred (error code-50).
This appears when I'm copying a file to the drive and then I wasn't able to edit to my drive.
Then this morning I can't open my project file. I get this message: The project appears to be damaged, it cannot be opened.
What should I do!??
I have moved my project onto 2 different external hard-drives now.

Hi There,
After looking around for this error, it seems to be related to OS, we would recommend you to contact Apple support for this.
Thanks,
Atul Saini

I keep getting this error code 7 (windows error 126). can't open itunes, what do i do?

i keep getting this error code 7 (windows error 126). can't open itunes, what do i do?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99703)

How can we write the code for opening the command prompt and closing the

how can we write the code in java for opening the command prompt and closing the cmd prompt from eclipse (cmd prompt should close when click on the turminate button in eclipse)

rakeshsikha wrote:
how can we write the code for opening the command prompt and closing theBy typing in Eclipse (which you seemingly have)?

Java Code file 1 meg... Can't open it

Hi All,
I've just started using SJSE and have run into a couple of issues. First problem is that I can't open my java source file. Second issue is I can't get the ide to run my applet. It just displays a small box and that's it. Everything worked great in V7. Below is the output with respect to the opening of the source file.
java.lang.NullPointerException
     at org.netbeans.modules.javanavigation.actions.OpenAction.selectElementInPane(OpenAction.java:187)
     at org.netbeans.modules.javanavigation.actions.OpenAction.access$000(OpenAction.java:56)
[catch] at org.netbeans.modules.javanavigation.actions.OpenAction$1.run(OpenAction.java:129)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)

Yes it only happens with large files. I have set the following in the jstudio.conf file.
netbeans_default_options="-J-Xms512m -J-Xmx512m -J-XX:PermSize=128m -J-XX:MaxPermSize=256m -J-Dnetbeans.logger.console=true -J-ea -J-Dsun.java2d.pmoffscreen=false -J-Dcom.sun.im.service.xmpp.session.keepaliveinterval=30 -J-Dcom.sun.aas.installRoot=\"K:\Program Files\Sun\jstudio_ent8\AppServ8.1UR2\""
Also, when building my sources I get another 'bug report' message.
An exception has occurred in the compiler (1.5.0_04). Please file a bug at the Java Developer Connection (http://java.sun.com/webapps/bugreport) after checking the Bug Parade for duplicates. Include your program and the following diagnostic in your report. Thank you.
com.sun.tools.javac.code.Symbol$CompletionFailure: file javax\servlet\ServletContext.class not found

Can't open iphoto, showing a code -1712

hello, have only just started using a mac, so please be kind x
i can,t open i photo, have been using it fine, but today it wont open and shows the code -1712, can anybody please advise on what to do, i'm worried about losing all my images in there too, many thanks in advance x

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Post back with the result.

I can't open any of my Word documents on my Apple Mac. The error code is EXC_CRASH (SIGABRT) and the blame module name is WordArt. The documents are still there, and I can open them on my iPad when I email them there. Any ideas?

I can't open any of my Word documents on my Apple Mac. The error code is EXC_CRASH (SIGABRT) and the blame module name is WordArt. The documents are still there, and I can open them on my iPad when I email them there. Any ideas?

Uhhhhh... Thank GOD... Got all of my files.
Spent some time on the phone with Apple Care... who was great to deal with but actually... not as helpful as I was hoping. It was suggested that I try DiskWarrior 4 to try to recover the files. $108 later, I had no files.
More calls with Apple Care and they were pretty sure that everything was gone since once the External drive was installed, like a moron, I let TimeMachine go ahead and back up my new MacBook... so it overwrote who knows how many gig that was my entire MacBook.
I wasn't giving up so I called Maxtor, the manufacturer of the external drive itself. They suggested file recovery software from I365... which is also a Seagate company (the makers of the drive). The suggested I simply use their demo because the demo version would find the files. If it found them, I could buy the software to restore them.
It found them! Another $129 after and I was able to restore all of them back to my old PC laptop.
NOW, I just need to figure out how to get the 50gig of HD video files off of my old laptop now and into my Mac and IMovie so I can actually make some DVDs out of them!
I get that Macs and PCs are different formats but I think it is ridiculous that formatting still means basically just wiping out or at least treating massive lots of old data as if it isn't there. There's gotta be a better way to do that.

Help! Can't open Labview program with MATLAB codes !!!

They used to work! But today I just can't open any LabView program with MATLAB codes in. This also happened some time ago, but after a day I tried again, it went back to normal. Can anyone help me fix it? Many thanks !!!

Hello BLpig,
Thank you for your inquiry regarding problems opening a VI. It sounds like a VI containing MATLAB code will not open in LabVIEW. This problem can happen when using LabVIEW 7 on a Windows 2000 machine. Assuming this is your setup, the following link is a great resource when dealing with this issue.
http://digital.ni.com/public.nsf/websearch/4475BC3CEB062C9586256D750058F14B?OpenDocument
Other resources similar to this can be found on the ni.com website by clicking the support tab at the top of the home page. Then search for �open vi matlab� from Technical Resources at the top of the page or topics similar to this. I hope these resources help. Let me know if I can further assist you.
Shea C.
Applications Engineering

I am trying to update to ITunes 11.1 and it gives me error code 2324 Now I can't open ITunes or delete it

I am trying to uodate ITunes on windows 8 It gives me errroe code 2324.Now I can't open ITunes or uninstall it.

Try this previous discussion:
What's error (-43) and how do I fix it?

My Macbook pro won't open downloaded programs. it just opens the code it was written in using the text and edit app. How can I fix this?

My Macbook pro won't open downloaded programs, it just opens the code it was written in using the text and edit app. How can I fix this? I just bought the computer last month so this is some what frustrating.

If you are downloading .exe files, those are Windows programs, and will not run on your Mac unless you install Windows on it. (That is possible, if you need one of those apps.)

Bootcamp won't launch, I've been getting the message "quit unexpectedly". This started happening after I erased "pre" from the code now I can't open it any more. What should I do?

Bootcamp won't launch, I've been getting the message "quit unexpectedly". This started happening after I erased "pre" from the code now I can't open it any more. What should I do?

Please try
sudo codesign --deep -fs - /Applications/Utilities/Boot\ Camp\ Assistant.app

How can i open my external locked macbook pro when i have the code

how can i open my external locked macbook pro when i have the code
for fun i have external locked my mac, and now i dont know how to open it again :-(
do someone know where i can write the code so it will work again?
thankes

www.itunes.com type that on your internet browser and download the newest version of itunes.

Error Code 10660 -- can't open a file

I can't open a WORD file unless I have already opened WORD. In the past, the computer would open the application for me and open the file. When I try, it pops a dialogue box saying: The Operation could not be completed, and in smaller type: an unexpected error occurred (error code 10660).
What went wrong, and how can I fix it?

Hi there,
I believe the problem has nothing to do with your Mac but with your copy of Microsoft office, the code appears to be well known by them.
Have a look this link:
http://support.microsoft.com/kb/890889
Good Luck!

D/l iOS 7 and didn't get pass code Can't open iPad

Can't open iPad. Downloaded ios7 and didn't get pass code. What do I do?

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Can`t open T-Code HU02

Similar Messages

Maybe you are looking for