Can't open the "port to VLAN menu" in SG200 -08

I get a empty blue window when I try to open "port to VLAN"
We have upgraded the software but it dosn't help.

Hello Gill,
I would recommend testing with a different browser. Sometimes this will work. If this does not work, please give us a call at the support center. We would be glad to have a look.
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html

Similar Messages

How can I open the ports with the Airport Extreme?

I have an Airport Extreme Base Station connected to a cable modem and I want to open the ports for the two Playstation 3's I connected to the Airport Extreme via Cat 6 ethernet cable. The first Playstation 3 will be used to play Call of Duty Modern Warfare 2 and the other Playstation 3 will be used to watch streaming movie from Netflix. Does anyone know if this can be done?

It is documented on Page 54 of Apple's "Designing
AirPort Networks Using AirPort Utility Mac OS X v10.5 + Windows" (direct PDF download link).
The public port and private port would be set the same value.

RV042 can't open any port!

Hello,
I have a RV042 Dual Wan. Two internets balanced wow! who would've thought that the headaches were waiting patiently right down the corner.
I was working with a 2wire Gateway that came with my ISP. I was able to open the ports in order to have public access for my students and teachers to upload their work. All I had to do was to allow my server ip address to have access to different ports blocked by the ISP. I used
http://www.canyouseeme.org/ in order to verify if my port was open.
I bought the RV042 for various reasons like excellent content blocking, load balancing, quick vpn, among other. But I just can't open the port 80 while having having my two ISP connected with load balancing, not even while having only one modem connected.
I have resolved many issues using the protocol binding. I have tried everthing. I just don't undertand something.
Whenever I connect my server to my old router, "www.canyouseeme.org" tells me that my port 80 is open.
Whenever I connect my servet to the RV042-DW, my port appears closed.
So it's not any OS issues.
I've tried:
- To forward the TCP 80~80 port to my server static ip address... but failed
- To enable UPnP function with the same port... but failed
- To configure the port triggering with the same port.. but failed.
- To disable the firewall.. but failed.
- To use transparent bridge in the WAN1 with my 2wire Gateway... but failed
- To set up an account in DNS.ORG already had one, everythings is in green.. but failed.
- To change the configuration in my old 2Wire Gateway router to allow a DMZ zone so all ports are public... but failed.
- To assign RV042 router ip address in my old 2Wire allowing that specific address to allow certain ports to be public... but failed.
I have the Firmware v4.0.4.02 from DEC/11
HELP!
http://www.youtube.com/watch?v=TU7JjJJZi1Q

Which leads us to the second preoccupation. If I can't make port 80, or port 21 to be public then could i set a QuickVPN successfully?
Is it possible to bridge a RV042 Dual Wan to a RV042 V3 Dual Wan to bring 3 ISP's downstream loading balance into 4 outputs.?
First Router
1st ISP = 2Wire Gateway 1Mbps Down , 0.5Mpbs Up
2nd ISP = Same as 1st
Second Router
3rd ISP = Dedicated Internet access 2Mbps UP and DN
Would that produce a 3Mpbs Down, 2.5Mpbs up?

Can I open a port range in the firewall for one host?

Can I open a port range in the firewall for one host? In other words, I want to be able to open ports 54001 to 54050 to allow one remote host in my LAN to access that port range in my Mac Server. Is this possible? Currently, the only option I see is to open individual ports for all external hosts (eg http or https)
Thanks in advance!

Which version of OS X Server are you using?
Server 2.2 and earlier includes an interface to a software firewall that can be configured to open specific ports very easily. Descriptions of how to configure the firewall can be found in the documentation for these versions.
Server 3.x no longer has an interface to the software firewall - it is still there, but you need to use other methods do configure it. A popular example of such a method is the icefloor utility.
Apple suggest that for Server 3 you delegate firewall duties to an external router. Server 3 includes the ability to configure the firewall component of Apple Airport routers 'automatically'
if you connect a machine running Server 3 directly to an Airport Router the router appears in the LH pane in the Server.app window (usually second line, below the entry for the server itself), and you can control what services are 'enabled' through the firewall there.
a more common solution perhaps is to use a non-apple router, and configure the firewall (and so open specific ports) through whatever control interface is provided for that router. There are many many kinds of hardware router you could use, and the control interfaces used vary widely - so you will have to consulting the documentation for your own router to work out how to do this.
If you post information about your software versions, and hardware configuration, it is possible that you can get more specific help with the tasks involved in opening the ports.
Hope this helps.

Can anybody say why In the layer menu the background color is white when opening a layer mask, and why does it automatically turns black by simply opening the layer mask properties menu? The vector mask is white anyway.

Can anybody say why In the layer menu, the background color is white when opening a layer mask, and why does it automatically turns black by simply opening the layer mask properties menu? The vector mask is white anyway.

Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
That field is not for attempting to fit your entire question in there.
Please keep this in mind next time you post. Thank you.
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Why my iphone screen can not open the key and can not enter the menu

why my iphone screen can not open the key and can not enter the menu

Your issue is not clear - are you saying your phone is disabled and/or you forgot the passcode?
http://support.apple.com/kb/ht1212

When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?

When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.

I am unable to open Photo on my MacBook Pro after installing ilife 11 from a disc. The message I get says "you can't open the application iPhoto because it may be damaged or incomplete. What can I do?!

I am unable to open iPhoto on my Macbook Pro (OSX 10.9.3) after installing ilife 11 from a disc. The message I get is "you can't open the application iPhoto because it may be damaged or incomplete. What can I do?! Any help will be greatly appreciated.

Reinstall it.This time delete the receipts first.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
Important:
As you're on 10.9.3 you'll need to update iPhoto to v9.5 before opening it. Use Software update.

When i try to open the iPhoto app, i getting a message "you can't open the application because it is not supported on this type of mac"

when i try to open the iPhoto app, i getting a message "you can't open the application because it is not supported on this type of mac"

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

I can not open the mac app store from my macbook pro, I can not open the mac app store from my macbook pro, I can not open the mac app store from my macbook pro

Help...
I can not open the mac app store in any way from my mac book pro
please help

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

I can not open the breakpoint dialog in upper right next to plus sign.

EDIT: After more digging into the issue, I found out that the trick is to click AND HOLD on the upside triangle to access the breakpoint dialog box. See link --> Adobe Edge Reflow Team Blog | Q & A From “Talk To The Team”
I can not open the breakpoint dialog in upper right next to plus sign. I click on the downward triangle with no success. Is there a trick to getting this to open? Or better yet, is there a hotkey?
Thank you for your help-
Shawn
Message was edited by: Shawn Rossi

Within Photoshop go to the "About Plug-in…" menu item just below "About Photoshop" to find the Camera Raw version number. On which menu that is depends on your platform, Macintosh or Windows, which you neglected to mention.
Raw files from your camera have been supported since version 2.0 of Camera Raw for years and years, so it's not a question of your version of ACR. Any version of ACR that runs in CS5 should open those files.
I suspect your raw files are damaged (corrupted).

Why would an error pop up saying the installer is damaged. The Installer can't open the package. There may be a problem with file ownership or permissions. when trying to install java 7?

why would an error pop up saying the installer is damaged. The Installer can’t open the package. There may be a problem with file ownership or permissions. when trying to install java 7?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

When I try to open iPhoto a box comes up that says "You can't open the application because it may be damaged or incomplete." I just scanned some pictures in, and then this happened.

Does anyone know what to do if you try to open iPhoto and the box comes up and says "You can't open the application iPhoto because it may be damaged or incomplete." Previous to this I added some pictures and documents that were scanned from my Lexmark all-in-one. Now I can't open iPhoto.

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.

Tecra M1 - Modem doesn't work (can't open a port)

I have a problem: After reinstalling WinXP and drivers on my Tecra M1, modem doesn't function. It even can't diagnose itself - there always comes a warning: "Can't open a port (COM). It may be used by another device or application". I installed the latest Toshiba drivers for the modem, but nothing changes. How can I fix it? Looking forward for your advices!
Best regards.

Hi
Did you install the drivers in the right order? Not? So do it!
Did you install any additional devices or software which could has a bad influence on the modem?
Check the modem status in the device manger. Can you see any yellow exclamation marks?
Try to start the modem test within the Operating system.
Check the Modem function under
Start -> Control Panel -> Phone and Modem Options -> Modems Tab -> Properties -> Diagnostics
by pressing the "Query Modem" button.
If the Modem Information window contain a list of AT commands (including ATI2, ATI3, ATI4 etc.), then the modem is correctly installed. The ATI5 command ends in with the number for the selected Regional settings (for example Germany = 06).
To change the Regional Setting please use the Toshiba Internal Modem Region Select Utility.

Safari can't open the page https

Frustrating to say the least. About a week ago whilst in Google mail, Safari failed to open an email instead it opened a page displaying the message Safari can’t open the page “https"//mail.google.com" etc
A page refresh also failed to open the page as did a my attempt to "Sign out".
Later that day the same problem occurred when I was using my bank's website. Oddly, when I turned to Camino and it too failed to open Googlemail and the bank's site. On my MacBook both sites worked from both applications. Add if I use a different user account on my Mac Pro, I don't have the problem.
My account is a “Standard” user. A logout and back in and it works again, a reboot and it works again but after a couple of hours the problem returns:
Any help welcomed as the following steps have failed to resolve the issue:
Empty Safari cache
Reset Safari
Uninstall Safari 4.0 beta and re-install Safari 3
Re-install Safari 4.0 beta
Swaped ethernet connection on my Mac Pro
Verify Disk Permissions
Repair Disk Permissions
Delete website history with "Adobe, Website Storage Settings panel"
Reset router
Rebooted Smoothwall
ClamXav found nothing
DNSChanger Removal Tool found nothing
iServices Trojan Removal Tool found nothing
removed .GlobalPreferences.plist
Thx
John

Hi John
Google Mail has been problematic on Safari 4. There are a number of threads in the Safari 4 Beta forum addressing the issue.
Thanks for posting the steps you have taken so far.
In a broader sense, security certificates are at the root of secured sites functioning. Those certificates are part of the Keychain file in HD>System>Library>Keychains. Perhaps, the keychain file needs repair. Open Keychain Access in your Applications>Utilities folder. In the Keychains Menu, select "Keychain First Aid">repair. If any errors appear, rerun until you get a clean pass.
If no errors appear, you may have to reestablish the keychain entries in your Standard account. Do you have administrative privileges assigned to that account?
Also, I'm not familiar with Smoothwall's operation/setup, however, some tweaking of its settings may be necessary. Here's some dated technospeak about Smoothwall and Safari.

Can't open the "port to VLAN menu" in SG200 -08

Similar Messages

Maybe you are looking for