Can't open Web Archive

Thanks for reading. I have a number of web archives saved and understood them to save whatever was shown, notwithstanding future changes to the page. Am I correct in my understanding?
Trying to open some (not all) of these pages, I get "There was one opening error... choose Activity from the Window menu." The pages will not open.
Choosing Activity shows-
"file:///Users/martin_bell/Documents/Documents/Finances/Sandys%20Tax/Sandy's%20 return%202006:2007.webarchive 1 of 2 items (1 error)".
These were saved on a previous iMac and transfered using target disk mode. Any ideas?
Thanks.

Hi Martin
safari & webarchives is a little err, less than ideal... although most of the images/items are stored in the archive - they don't always seem to get displayed by safari if they're no longer on the web - hmmm.
web archive folderizer extracts all stored items from the webarchive into folders, but doesn't produce a nice, easy to click icon that displays it all in a browser - however, it might let you find the items that don't show up.

Similar Messages

Can not open Web from Nokia N81

Hi
My Nokia N81 worked fine until today
I just connected it to PC Suite and made a synchronization - now I have folowing problem - I can not open web-browser any more.
When I go into menu and then try to open Icon web - screens becames blue (desctopimage) for a second and then I'm landing again in menu just as it was before click on icon
What can be the reason of this problem?
Similar happened also with N-Gage Icon. I've tried it with memory card and without it - the result is the same - I can not go into web-section of my Nokia

Hi,
It seems that some faults has occurred during
the synchronization. You should re-set your
internet settings. If the issue persists your
phone will need reformat.
Regards.
Fattan

TS3276 Can't open web addresses from an email-get an ERROR message saying-no application could be found

Can't open web addresses from an email-get an ERROR message saying-no application could be found

Hi, I had the same problem. I finally figured it out. Plug in the USB cord to your ipad, but beofre plugging it into your computer make sure your ipad is not in the locked or sleep mode. Once I did this, my photos showed up and started downloading. Hope that helps you!

How can i open the archived pst file in my Mac Air

How can i open the Archived outlook pst file in my Mac air, i want to access my old outlook mails.

System.setProperty("java.security.policy", "system.policy");Is this a new feature in JDK1.4? I don't see it in
the documentation for JDK1.3.1 that I'm currently
using.Look more closely. There is indeed a setProperty(String, String) in
http://java.sun.com/j2se/1.3/docs/api/java/lang/System.html
"Since 1.2"
- Marcus

Can't open webi documents

Hi,
We can't open webi documents on BO XI 3.0. We have the following error message :
com.businessobjects.wp.om.OMReportElementContainer
(Error: INF)
But we can open deski documents through infoview.
Any ideas ?

We are seeing this error now and it has happened again after restarting the SIA and Tomcat. We will try rebooting whole server tonight.
SAP KB 1326991 suggests:
Cause
The CMSClusterMembers entry in the registry is not updated.
Resolution
WARNING ***********
The following resolution involves editing the registry. Using the Registry Editor incorrectly can cause serious problems that may require you to reinstall the Microsoft Windows operating system.
Use the Registry Editor at your own risk. It is strongly recommended that you make a backup copy of the registry files before you edit the registry. For information on how to edit the registry key, view the 'Changing Keys And Values' online Help topic in the Registry Editor (Regedit.exe).
Make sure that the CMSClusterMembers entry is updated in the registry. Or you can edit it manually.
The CMSClusterMembers entry can be modified from HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 12.0\Enterprise\CMSClusterMembers.
Restart Server Intelligence Agent (SIA).
Has anyone tried this - what is meant by 'updating' the registry entry? Updating to what?
thanks
Keith
XI 3.1 SP2

Can't open web pdf files from my Reader DC because my IMac wants a completed license agreement to use Reader and I never saw that page during installation.

Can't open web pdf files from my newly installed Reader DC because my IMac wants a completed license to use agreement to Reader, and I never saw that page during installation. How do I get past this?

You need to accept the EULA on first launch of the Reader DC application.
Go to the Applications folder and launch Adobe Acrobat Reader DC.
This will bring up the EULA.
Select the "Agree" button if you agree with the terms
Assuming you selected the "Agree" button, Reader DC should open.
You should now be able to open PDF files in your web browser.

Mail in 0S 10.8 can't open web links embedded in mail message

Mail in OS 10.8 can't open web links embedded in mail messages. Just started this AM but I changed nothing.

Please don't post here about beta software. There are confidential forums set aside for developers to use. Developer Forums. If you are a paid developer or seed tester then it's a violation of your NDA to post in these forums. If you aren't a developer or seed tester then you have an illegal copy.

Can't open web page because too many redirects

Get the message Can"t open web page because too many redirects

Try clearing Safari and restart the iPad.
Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Can not open web site Shutterfly with Firefox

A few days ago Firefox blocked me from getting into my web site on Shuttrerfly.I get a notice from Shutterfly stating they are having a problem.Checked with Shutterfly and they ARE NOT having a problem.I CAN open my site via Internet Explorer and it works fine.Up ro a few days ago Firefox was working fine with my site.It is just my site that has a problem with Firefox as e-mail and the rest works fine.I deleted Firefox and re-downloaded it but that did not help.Clerared all cookies and no help.Why can I open Shutterfly with Internet Explorer and Can not with Firefox?..My main e-mail address is [email protected] help there also.

Hi,
It seems that some faults has occurred during
the synchronization. You should re-set your
internet settings. If the issue persists your
phone will need reformat.
Regards.
Fattan

Can't open after archive install and migration

Hi there, so heres the deal. I recently posted an issue I had with my imac and turned out the only way to save all my data was to do an archive and install. So I upgraded my HD at the same time to a 2 TB. They then installed OS X and did migration with my old drive. Also the reason I had to new drive was because the previous 500 GB drive was nearly full. Anyways, got my computer back today and everything is pretty good aside from missing quicktime 7 in utilities and a couple drivers and my printers but so far thats it aside from FC studio 2. They just won't open so I read some threads on that and seems like majority say to do a clean install of OS x and I just don't want to do that as I finally got everything normal again. I was thinking of just deleting the apps and reinstalling them but figured I would come on here and see if I could get a second opinion. Thanks for your time
Nat

Well for starters I can't back up cause I am away from home and my time machine drive is at home. But if i were to get it home and run a back up would it just back up everything as is right now which is in error. When i say data I mean all the stuff on my imac HD. Documents, photos, movies etc. Something needs to be done cause i see this problem has went to my iphoto as well. Can't open it which is not good. I put a few photos on there since my last back up. Luckily i do still have the drive that cause the was swapped out that still has some of the data on it. So if one was to do a proper reinstall or clean install, what is the process.

Can't open web case until register product?

This is my FOURTH time needing to have Adobe reset my account because it says I have "Too many activations". Of course this is because every time I try to open the program I have to go through the activation setup process.
I have encountered a new problem this time. My three old web cases are listed and shown as CLOSED. But when I click on "create new web case" I am sent back to my home screen, with no option to create the case. There is a message that says that I must register the product before I can create a web case, and I have never had to do that before. When I try to register the product it asks for a serial number, and when I follow the instructions for finding the serial number there are no downloads listed. I am currently on hold with Adobe support, I put my number in the que because it said there was only a 2 minute wait and they called and put me on hold. I have been holding for an hour and twenty minutes so far.
I am so disappointed in this program, I have already missed TWO library books that I had been on the list for because of this problem. Not to mention all the previous times I have had too many activations. Any help you can offer me about the web case or how to get customer service on the chat program will be greatly appreciated.
Thank you in advance!

06-Jan-2008 05:57 PM
lalika wrote:
Update your mobile device
or format phone memory.
Keep ur phone memory maximum free .
I also faced this problem.
Actually I put all my data on my memory card, the phone card only have the original application.
I think I have to do the last option.. to format all phone memory.
thx

Can't open web links in emails via Safari 6.1.6

Hello...
I'm working on a Macpro computer with OSX 10.7.5.
In Safari 6.1.6 I can't open ANY links that are in emails. Links to other web sites, links to file via you send it, nothing. I've disabled the block "pop ups" tab in preferences and still nothing. I don't want to upgrade to the new OSX, as everything else on my computer is running fine.
Can someone tell me what to do to get this working again….

I encountered the same problem. In my case, the culprit was a plug-in in the Internet Plug-Ins sub-folder of my User Account's Library folder.
Here's how I proceeded, based on a suggestion by Carolyn Samit here:
<https://discussions.apple.com/thread/5117605?start=0&tstart=0>
1. Open the Finder.
2. In the Finder menu bar, click on the heading Go. Scroll down to "Go to Folder," and then click the mouse button again.
3. Copy the following phrase:
/Library/Internet Plug-Ins
and then paste that phrase into the field in the navigation window that appeared at the end of Step 2.
3. Click Go.
4. If you find a plug-in named AdobePDFViewer.plugin, drag it to the Trash.
5. Quit and then relaunch Safari. Then try to load in Safari a PDF from a web site. Then try saving it. Once saved/downloaded, try opening the PDF.
When I followed this procedure, the corrupted-PDF problem went away, thanks to Ms. Samit's suggestion.

Opening Web Archive files in WebCT

"This document is a Single File Web Page, also known as a Web Archive file. If you are seeing this message, your browser or editor doesn't support Web Archive files. Please download a browser that supports Web Archive, such as Microsoft Internet Explorer."
This is the message I get whenever I try to access the page for class outlines, ect. They are usually powerpoint type things, but they open in Word (on Windows).
I have tried using Firefox, Opera, Safari, Internet Explorer, copy/paste into Word, and saving it as a PDF. It works perfectly on Internet Explorer when using Windows.
Is there anyway I'll be able to access these kinds of pages while I'm on a Mac?
Macbook Mac OS X (10.4.8)

When viewing brought Safari the same picture ca only be saved as a Web Archive file format.
That's because you're not saving the pictures you're saving the page that contains them.
Drag and drop the images from the Safari Window to the desktop and then import them from there to iPhoto.
iPhoto is not a web browser and cannot read web archives.

TS3230 I can't open web based PDF files - the page is just a black one - anyone?

Can anyone help me? I can't open PDF attachments - online the page opos up as blank and black, and with emails on gmail - the document just wont open. I have tried to reload my adobe reader to no avail.

Back up all data.
If Adobe Reader or Acrobat is installed, there should be a setting in its preferences such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected. Otherwise do as follows.
Triple-click the line of text below on this page to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present. The same goes for a plugin called "iGetter," and perhaps others.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

RV120W can't open web management, can't open SSH/http to server on LAN port

Hi,
I just buy cisco RV120W, but seem I found alot of issue. Hope some one can help.
Topology:
Internet------RV120W(192.168.1.1/24)--------(192.168.1.5/24)PC
|---------------(192.168.1.2)L3switch(10.10.10.1/24)--------(10.10.10.2/24)Server
Here is the issue:
1. from PC after I login to 192.168.1.1 the WEB can't be opened. it show as web server not responding. I have try with 3browser 2PC but all same. But I use HP it can be opened.
2. on RV120W I added static route and now I from PC I can ping to Server. I can telnet but SSH/HTTP always failed.
On firewall I never set anything, all is permited.
I try version 1.0.3.10 and 1.0.4.10 but all same.

Hi Bernadi, thank you for using our forum, my name is Luis I am part of the Small business Support community. I have some question for you:
1.1) What kind of computer are those that didn't work?
1.2) If you connect those, are you receiving an IP address from DHCP?
1.3) What gateway is showing?
2.1) Do you have any debug or error?
2.2) Did you try creating an Forwarding rule for 443 to the server address?
I recommend you always use the last firmware.
I hope you find this answer useful
Greetings,
Luis Arias.
Cisco Network Support Engineer.

Can't open Web Archive

Similar Messages

Maybe you are looking for