Can't open web case until register product?

This is my FOURTH time needing to have Adobe reset my account because it says I have "Too many activations".  Of course this is because every time I try to open the program I have to go through the activation setup process. 
I have encountered a new problem this time.  My three old web cases are listed and shown as CLOSED.  But when I click on "create new web case" I am sent back to my home screen, with no option to create the case.  There is a message that says that I must register the product before I can create a web case, and I have never had to do that before.  When I try to register the product it asks for a serial number, and when I follow the instructions for finding the serial number there are no downloads listed.  I am currently on hold with Adobe support, I put my number in the que because it said there was only a 2 minute wait and they called and put me on hold.  I have been holding for an hour and twenty minutes so far.
I am so disappointed in this program, I have already missed TWO library books that I had been on the list for because of this problem.  Not to mention all the previous times I have had too many activations.  Any help you can offer me about the web case or how to get customer service on the chat program will be greatly appreciated.
Thank you in advance!

06-Jan-2008 05:57 PM
lalika wrote:
Update your mobile device
or format phone memory.
Keep ur phone memory maximum free .
I also faced this problem.
Actually I put all my data on my memory card, the phone card only have the original application.
I think I have to do the last option.. to format all phone memory.
thx

Similar Messages

  • Can not open Web from Nokia N81

    Hi
    My Nokia N81 worked fine until today
    I just connected it to PC Suite and made a synchronization - now I have folowing problem - I can not open web-browser any more.
    When I go into menu and then try to open Icon web - screens becames blue (desctopimage) for a second and then I'm landing again in menu just as it was before click on icon
    What can be the reason of this problem?
    Similar happened also with N-Gage Icon. I've tried it with memory card and without it - the result is the same - I can not go into web-section of my Nokia

    Hi,
    It seems that some faults has occurred during
    the synchronization. You should re-set your
    internet settings. If the issue persists your
    phone will need reformat.
    Regards.
    Fattan

  • Can't open web page because too many redirects

    Get the message Can"t open web page because too many redirects

    Try clearing Safari and restart the iPad.
    Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • TS3276 Can't open web addresses from an email-get an ERROR message saying-no application could be found

    Can't open web addresses from an email-get an ERROR message saying-no application could be found

    Hi, I had the same problem. I finally figured it out. Plug in the USB cord to your ipad, but beofre plugging it into your computer make sure your ipad is not in the locked or sleep mode. Once I did this, my photos showed up and started downloading. Hope that helps you!

  • Can't open webi documents

    Hi,
    We can't open webi documents on BO XI 3.0. We have the following error message :
    com.businessobjects.wp.om.OMReportElementContainer
    (Error: INF)
    But we can open deski documents through infoview.
    Any ideas ?

    We are seeing this error now and it has happened again after restarting the SIA and Tomcat. We will try rebooting whole server tonight.
    SAP KB 1326991 suggests:
    Cause
    The CMSClusterMembers entry in the registry is not updated.
    Resolution
      WARNING   ***********
    The following resolution involves editing the registry. Using the Registry Editor incorrectly can cause serious problems that may require you to reinstall the Microsoft Windows operating system.
    Use the Registry Editor at your own risk. It is strongly recommended that you make a backup copy of the registry files before you edit the registry. For information on how to edit the registry key, view the 'Changing Keys And Values' online Help topic in the Registry Editor (Regedit.exe).
    Make sure that the CMSClusterMembers entry is updated in the registry. Or you can edit it manually.
    The CMSClusterMembers entry can be modified from HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 12.0\Enterprise\CMSClusterMembers.
    Restart Server Intelligence Agent (SIA).
    Has anyone tried this - what is meant by 'updating' the registry entry? Updating to what?
    thanks
    Keith
    XI 3.1 SP2

  • Error maximum number of files already open error.No Other files can be opened or printed until some are closed

    Hi everyone,
    While opening a file in Adobe reader 10 in Windows 7,I am getting the error as
    "The maximum number of files are already open.No Other files can be opened or printed until some are closed."
    Can Anyone help or suggest a setting for this ?
    Thanks in Advance
    Omkar

    Hello omkar841987,
    Could you please let me know how many files have you opened simultaneously.
    This count will include files that are being displayed as well as opened (without being shown in the viewer).
    Using Reader, you cannot make any setting for the same, but close some of the files before crossing that limit.
    It also depends on your OS and memory size as you would need enough memory to open many files at a time.
    Regards,
    Anubha

  • Can't open web pdf files from my Reader DC because my IMac wants a completed license agreement to use Reader and I never saw that page during installation.

    Can't open web pdf files from my newly installed Reader DC because my IMac wants a completed license to use agreement to Reader, and I never saw that page during installation.  How do I get past this?

    You need to accept the EULA on first launch of the Reader DC application.
    Go to the Applications folder and launch Adobe Acrobat Reader DC. 
    This will bring up the EULA.
    Select the "Agree" button if you agree with the terms
    Assuming you selected the "Agree" button, Reader DC should open.
    You should now be able to open PDF files in your web browser.

  • Mail in 0S 10.8 can't open web links embedded in mail message

    Mail in OS 10.8 can't open web links embedded in mail messages. Just started this AM but I changed nothing.

    Please don't post here about beta software. There are confidential forums set aside for developers to use. Developer Forums. If you are a paid developer or seed tester then it's a violation of your NDA to post in these forums. If you aren't a developer or seed tester then you have an illegal copy.

  • Im trying to upgrade the ram on the hp mini 200-4200sa. however i can't open the case?

    im trying to upgrade the ram on the hp mini 200-4200sa. however i can't open the case?
    This question was solved.
    View Solution.

    09aparker,
    The removal and replacement procedures are here:  http://h10032.www1.hp.com/ctg/Manual/c03163704.pdf
    -wes
    I am an HP employee.

  • Can't open web links in emails via Safari 6.1.6

    Hello...
    I'm working on a Macpro computer with OSX 10.7.5.
    In Safari 6.1.6 I can't open ANY links that are in emails.  Links to other web sites, links to file via you send it, nothing.  I've disabled the block "pop ups" tab in preferences and still nothing.  I don't want to upgrade to the new OSX, as everything else on my computer is running fine.
    Can someone tell me what to do to get this working again….

    I encountered the same problem.  In my case, the culprit was a plug-in in the Internet Plug-Ins sub-folder of my User Account's Library folder.
    Here's how I proceeded, based on a suggestion by Carolyn Samit here:
    <https://discussions.apple.com/thread/5117605?start=0&tstart=0>
    1. Open the Finder.
    2. In the Finder menu bar, click on the heading Go.  Scroll down to "Go to Folder," and then click the mouse button again.
    3. Copy the following phrase:
    /Library/Internet Plug-Ins
    and then paste that phrase into the field in the navigation window that appeared at the end of Step 2.
    3. Click Go.
    4.  If you find a plug-in named AdobePDFViewer.plugin, drag it to the Trash.
    5. Quit and then relaunch Safari.  Then try to load in Safari a PDF from a web site.  Then try saving it.  Once saved/downloaded, try opening the PDF.
    When I followed this procedure, the corrupted-PDF problem went away, thanks to Ms. Samit's suggestion.

  • Can not open web site Shutterfly with Firefox

    A few days ago Firefox blocked me from getting into my web site on Shuttrerfly.I get a notice from Shutterfly stating they are having a problem.Checked with Shutterfly and they ARE NOT having a problem.I CAN open my site via Internet Explorer and it works fine.Up ro a few days ago Firefox was working fine with my site.It is just my site that has a problem with Firefox as e-mail and the rest works fine.I deleted Firefox and re-downloaded it but that did not help.Clerared all cookies and no help.Why can I open Shutterfly with Internet Explorer and Can not with Firefox?..My main e-mail address is [email protected] help there also.

    Hi,
    It seems that some faults has occurred during
    the synchronization. You should re-set your
    internet settings. If the issue persists your
    phone will need reformat.
    Regards.
    Fattan

  • TS3230 I can't open web based PDF files - the page is just a black one - anyone?

    Can anyone help me?  I can't open PDF attachments - online the page opos up as blank and black, and with emails on gmail - the document just wont open.  I have tried to reload my adobe reader to no avail. 

    Back up all data.
    If Adobe Reader or Acrobat is installed, there should be a setting in its preferences such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected. Otherwise do as follows.
    Triple-click the line of text below on this page to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, remove any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present. The same goes for a plugin called "iGetter," and perhaps others.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • RV120W can't open web management, can't open SSH/http to server on LAN port

    Hi,
    I just buy cisco RV120W, but seem I found alot of issue. Hope some one can help.
    Topology:
    Internet------RV120W(192.168.1.1/24)--------(192.168.1.5/24)PC
                          |---------------(192.168.1.2)L3switch(10.10.10.1/24)--------(10.10.10.2/24)Server
    Here is the issue:
    1. from PC after I login to 192.168.1.1 the WEB can't be opened. it show as web server not responding. I have try with 3browser 2PC but all same. But I use HP it can be opened.
    2. on RV120W I added static route and now I from PC I can ping to Server. I can telnet but SSH/HTTP always failed.
    On firewall I never set anything, all is permited.
    I try version 1.0.3.10 and 1.0.4.10 but all same.

    Hi Bernadi, thank you for using our forum, my name is Luis I am part of the Small business Support community. I have some question for you:
    1.1) What kind of computer are those that didn't work?
    1.2) If you connect those, are you receiving an IP address from DHCP?
    1.3) What gateway is showing?
    2.1) Do you have any debug or error?
    2.2) Did you try creating an Forwarding rule for 443 to the server address?
    I recommend you always use the last firmware.
    I hope you find this answer useful
    Greetings,
    Luis Arias.
    Cisco Network Support Engineer.

  • Cane not open web site

    i try the open web site www.ncsoft.com. But cane not open. For 5 day i have not this roblem

    I get: Status: HTTP/1.1 503 Service Unavailable
    So it seems that the website is not available at the moment.

  • When I try to download any application the page does't work. It says that OX can't open web pages that start with aam

    when I try to download photoshop or illustrator the web doesn't work. it says that OS X can't recognize web pages that start with "aam"

    May I know whether you are trying to download Photoshop cc and Illsutrator cc applications?
    Have you installed Creative Cloud desktop application ?
    https://creative.adobe.com/products/creative-cloud

Maybe you are looking for

  • A/R / A/P Aging question

    Our customer frequently needs to run aging reports as of a date in the past (i.e. they are running 11/30/13 right now).  In order to get the report to tie to the trial balance, we need to select criteria to include customers/vendors with a -0- balanc

  • SQL query using LIKE

    I want to do an SQL query which uses a parameter. This is the query: Find the books which contains the string "strTitle". I do this (it does not work): String strSQL="SELECT * FROM Books WHERE Title LIKE %'"+strTitle+"'% "; I know it is not correct,

  • What is facetime? And how do you use it?

    What is facetime and how do you use it?

  • Flashhelp, Safari and Intel-based Macs

    I'm having problems with my Flashhelp project properly displaying on Intel-based Macintoshes in Safari. The project displays all of the flash-based UI elements, but doesn't display the topic matter itself. The exact same projects work fine with Firef

  • Plz help me.I want information on bw/bi

    hi,     I am a b.tech student .Now i am taking training on sap bw/bi. I want to know how will be the future for this.is now market is good for this for both freshers and experienced.                     could any one  pleasehelp me.