Can't output to HD tape PE7

I'd expected to be able to output the finished HD project to my Canon HV10 camcorder as I can do with my Magix Pro 14 programme. To date I have exclusively used PE3 to create my finished HD files as an M2T files, then imported into Magix for export to tape as PE3 wasn't able to do it. So disappointing.

But you can use PE3 for exporting back to Tape in a DV camcorder. Just use the Export To Tape option and it will write back to the camcorder.

Similar Messages

Can FCP output HDV back to tape now? + GOP Gonforming Question

I am having problem with HDV CONFORMED render files being messed up and playing incorrect parts of video or being out of sync and jerking around.
FCP has to conform the HDV stream's GOP back to normal after editing before it can output. Does this apply to compression for DVD as well as output to Tape?
Last time I checked you couldn't output HDV to tape.
Is this new?

Actually I am having problems with the JVC HDV format and FCP.
FCP scrambles parts of the video in the render files while conforming.
=====================================================
What workflow did you use to output HDV to tape?
The standard output to tape procedure?

Can't mount volume in tape - device offline

Trying to test my first backup and it hangs.
I tried to mount the device and receive the error "can't mount volume in tape - device offline"
Anyone knows how to fix it?
Tks,
Kev

Please post the output from the following :
obtool lsdev -lvg
Thanks
Rich

How can I output text in a browser window in JAVA?

How can I output text in a browser window in JAVA?

"response.getWriter().print()" is the most common method when using servlets

How can I transfer The Simpsons Tapped Out game from my iPhone 4 to my iPhone 5?

I have just gotten an iphone5 and have done a backup from my iPhone 4.
I can't get The Simpsons Tapped Out existing game to work on the iPhone 5, how can I get the original game to work on the new phone? As I've done the restore on the new phone, it brings up a whole new game to start up with again.

i have tried to do this but when i log in it tells me there is a level 4 game on this device not my level 25 game. any suggestions

How can I output up to 7 tracks simultaneously?

Hello esteemed GB community.
I have to create a little effect for an upcoming party. For this I need to output the following:
- at least 4 separate audio channels (stereo front and stereo rear)
- one mono combination of these four tracks (to drive a Light organ gizmo - makes the light flicker with the audio)
- and finally one separate track on which I will put pulses to trigger a relay for a fog machine.
Setting up these tracks in GB should be fairly straigth forward (although my GB experience is very limited I've done a fair amount of audio mixing in FCP - which I imagine is similar) but my question is, how can I output all these tracks so I can feed them to their respective recipients? This means to two stereo setups for audio (or would it be easier to do 5.1 Dolby - $$$ ?) and then to the light organ and to the relay trigger for the fogger.
I did a search for multitrack but most answers I found dealt mainly with input, not output. I imagine this will require some kinid of an external box, right?
Budget for this box is very limited, hopefully less than $200. Quality does not have to be very high although a good bass response will be important for the effect.
Thank you very much for any help.
Bo

Thanks for your help, HT. Would Logic be a better choice than ProTools LE for this? (I know next to nothing about them I must confess...)
I was just thinking, in the worst case scenario, I could just create the 6 audio tracks in GB, then output three stereo mp3 files (stereo front, stereo rear, 2 control tracks), dump each on a separate cheap mp3 player and get a controller that can remote start all of them at the same time...
Does anyone know of such a cheap mp3 player that can be remote started via a wire connection to a relay? Is there another forum that deals with this kind of issue?
Thanks again.
Bo

How can i output the max average?

How can i output the max of the average?
i have this queries...
<cfquery datasource="Intranet" name="GroupStars">
        SELECT execoffice_status, employeedept, COUNT(*) as 'totalstars'
        FROM CSEReduxResponses
        WHERE execoffice_status = 1
        GROUP BY execoffice_status, employeedept
    </cfquery>
    <cfquery dbtype="query" name="GetTotalStars">
        SELECT *
        FROM GroupStars, GetDepartments
        WHERE GroupStars.employeedept = GetDepartments.csedept_id
    </cfquery>
<cfif GetTotalStars.RecordCount gt 0>
    <cfquery datasource="PhoneList" name="GetAllData">
        SELECT dept.csedept_id, COUNT(*) as 'totalcount'
        FROM employee, dept
        WHERE employee.dept_id = dept.dept_id
            AND employee.emp_status = 1
            AND dept.csedept_id is not null
        GROUP BY dept.csedept_id
    </cfquery>
    <cfquery dbtype="query" name="GetDepartmentTotalEmployeesCount">
        SELECT *
        FROM GetAllData, GetDepartments
        WHERE GetAllData.csedept_id = GetDepartments.csedept_id
    </cfquery>
<cfquery name="joinQuery" dbtype="query" >
SELECT *
FROM GetTotalStars
WHERE GetTotalStars.csedept_id = -1
</cfquery>
<cfset QueryAddRow(joinQuery)>
<cfquery name="GetUnion" dbtype="query" >
SELECT *
FROM GetDepartmentTotalEmployeesCount, GetTotalStars
WHERE GetDepartmentTotalEmployeesCount.csedept_id = GetTotalStars.csedept_id
UNION
SELECT GetDepartmentTotalEmployeesCount.*, joinQuery.*
FROM GetDepartmentTotalEmployeesCount, joinQuery
WHERE GetDepartmentTotalEmployeesCount.csedept_id NOT IN (#ValueList(GetTotalStars.csedept_id)#)
</cfquery>
<cfquery datasource="Intranet" name="GroupStarsGiven">
    SELECT execoffice_status, submitterdept, COUNT(*) as 'totalstarsgiven'
    FROM CSEReduxResponses
    WHERE execoffice_status = 1
    GROUP BY execoffice_status, submitterdept
</cfquery>
<cfquery dbtype="query" name="GetTotalStarsGiven">
    SELECT *
    FROM GroupStarsGiven, GetDepartments
    WHERE GroupStarsGiven.submitterdept = GetDepartments.csedept_id
</cfquery>
<cfquery name="joinQuery2" dbtype="query" >
SELECT *
FROM GetTotalStarsGiven
WHERE GetTotalStarsGiven.csedept_id = -1
</cfquery>
<cfset QueryAddRow(joinQuery2)>
<cfquery name="GetUnion2" dbtype="query" >
SELECT *
FROM GetUnion, GetTotalStarsGiven
WHERE GetUnion.csedept_id = GetTotalStarsGiven.csedept_id
UNION
SELECT GetUnion.*, joinQuery2.*
FROM GetUnion, joinQuery2
WHERE GetUnion.csedept_id NOT IN (#ValueList(GetTotalStarsGiven.csedept_id)#)
ORDER BY csedept_name ASC
</cfquery>
and this part is where i calculate the average, but i only get the average for each department, and from here i want to get the max of the average. how can i do that?
<td><div align="right"><cfif totalstars eq ''>–<cfelse><cfset avgstars = totalstars / totalcount>#DecimalFormat(avgstars)#</cfif></div></td>
thanks for your help

1) What is it doing instead?
2) Can you repost your code, but use code tags? If you repaste your formated code and place the tag [code] on top of your block of code and then paste [/code] on the bottom of your block, your posted code will retain its formating and be readable.
Good luck

How can I output RCA video?

How can I output RCA video from the headphone jack of my macbook pro? Is there any software to do this?

I can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera... is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
thanx

Grub can't output to display

ok, so I dual boot debian and arch and today I dist-upgraded to wheezy only to find arch gone from the boot menu. I workaround this by chrooting into arch and install grub there, and now and typing from arch. however, on boot after the bios flashes I get this message: can not output to this display. now, hitting enter boot arch, but a. I am completly blind in the grub menu and b. I have no of telling if debian is in the boot menu other then trail and error, which I havn't tried yet because thats really a different issue. any ideas on what might be causing the problem? which arch boots everything is fine from there, this is just a grub issue

even with arch mounted and os-prober installed debian fails to see arch (i've filed a bug report with debian) arch os-prober sees debian, but like I said, no video so I can't really tell what the menu looks like until I found that problem. anyway, heres /grub/default. I may try updating grubs menu again and see what happens
GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX=""
# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
# Uncomment to enable Hidden Menu, and optionally hide the timeout count
#GRUB_HIDDEN_TIMEOUT=5
#GRUB_HIDDEN_TIMEOUT_QUIET=true
# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console
# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=auto
# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep
# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true
# Uncomment and set to the desired menu colors. Used by normal and wallpaper
# modes only. Entries specified as foreground/background.
#GRUB_COLOR_NORMAL="light-blue/black"
#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
#GRUB_THEME="/path/to/gfxtheme"
# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"
#GRUB_SAVEDEFAULT="true"

Can I convert my VHS tapes into DVD using iMAC?

How can I convert my VHS tapes into DVD by using iMAC?

From VHS to DVD
http://www.macworld.com/article/1030972/fromvhstodvd.html   <<< click here.
How to Convert a VHS to a DVD for Mac OS X
http://www.ehow.com/how_6515774_convert-dvd-mac-os-x.html   <<< click here.
Roxio unveils VHS to DVD converter for Mac
http://www.macnn.com/articles/09/05/26/roxio.vhs.to.dvd/   <<< click here.
How to Convert VHS to DVD on Mac OS X
http://www.daniusoft.com/tutorial/burn-vhs-to-dvd-on-mac.html   << click here.

Can the output of a Generate Occurrence be passed in Local/Global Variable?

Can the output of a Generate Occurrence function, which is a refnum, be passed in Local/Global Variable so that it does not need to be wired to all parties directly?
Can more than one party be waiting on the same Occurrence and will all waiting function be released together?

dbaechtel wrote:
Answer was not given:
Can the output of a Generate Occurrence function, which is a refnum, be passed in Local/Global Variable so that it does not need to be wired to all parties directly? Is this possible?
I am not worried about whether it is bad form or not, as yet. That is for me to decide on a case by case basis.
Yikes! That is not a very good way to learn.
Anyways, to avoid any more bold emphasis on words, I will answer your question. Locals can only be linked to controls/indicators not individual wires. If you want to get the effect of a local/global variable with a wire value, search the forum for action engines or functional globals. Those will work for passing a wire value between threads.
That said, what are you trying to use occurences for? There may be (and probably is) a more accepted way to implement what you are trying to do instead of using local variables
CLA, LabVIEW Versions 2010-2013

Can't output text before document element?

Hello,
When I try to run my template, which is programmed in Java and which is supposed to extract information from XML-File, I use a XSLTInputSource interface. But the compiler send the following message:
org.xml.sax.SAXException: Warning: can't output text before document element! Ignoring...
Can anyone explain me, what this Exception means?
Thanks
RudiRatte

The XML-File is in a database, which I can't access.

Can you output iphoto slideshows in video formats?

Can you output iphoto slideshows in video formats? If so, which video formats? Is output in H.264 format with 4:3 aspect ratio possible? Thanks.

If you set the aspect ratio to 4:3 in iPhoto
you can use the Export button at the bottom of the slideshow window and pick one of the sizes you'd like.
That will give you this format:
If you want to do more customization of the output follow Terence's export method.
OT

How can I output the alpha channel in Premiere elements 10

How can I output the alpha channel in Premiere elements 10. What format should I use?
Tried outputting to an AVI filet but the file did not contain an alpha channel that After Effects 5.5 would recognize.

Bill,
I hope you ordered 32 GB or more on that new computer After Effects 5.5 takes up as much as it can.
The Roto Brush tool is really a timesaver over ordinary Rotoscoping. Although, my problem now is: when I try to send a 1 min. And 11 second video from Adobe Premier Pro 5.5 two Adobe Media encoder 5.5, the process hangs in wait state in the Media Encoder. I have filed a request for help on the Media Encoder forum.
I know you will put your new computer to use in helping other people and for this I thank you.

TS1702 ea game codes opo-up when redeeming "Before you can make purchases, you must tap Continue to sign in, then verify your payment info"

Hi there,
Not an urgent question, however I would like some help.
EA Games ran a great promotion over the holidays that offered free iphone/ipod and ipad games. I won a few but have not been able to access the games due a weird bug. Everytime I attempt to redeem the code on my iphone in the app store or via Itunes app a pop-up appears "before you can make purchases, you must tap Continue to sign in, then verify your payment info." I'd happily click the continue button if there was one. But there isn't. I click on for the pop-up to move on and I'm back at the screen that asks me to redeem. Which I do and the pop-up returns. I'm fully logged in my payment method works for other app purchases or updates but not these EA codes. Very odd.

There are user-to-user public forums, you're not talking to iTunes Support - I've asked the hosts to remove your account id and password from your post, but you should change your password IMMEDIATELY.
If you are getting a message to contact iTunes Support then you can do so via this link and ask them why the message is appearing (we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Can't output to HD tape PE7

Similar Messages

Maybe you are looking for