Can't pair apple wireless keyboard in Windows

Hi
I have just purchased the new June 2009 Macbook Pro. I've used bootcamp to install Windows XP and i'm trying to pair my apple wireless keyboard.
Its the brand new apple wireless keyboard but when i search for the device in the Bluetooth control panel, its displayed but when it attempts to pair it says completed ok, but the keyboard still doesn't work.
Any ideas?
Cheers
Andy

' Peter, I'm sorry to say this, but it sounds like you specifically either have a genuine hardware problem, or your Windows installation is sicker than most. You should never see the sort of symptoms you're talking about in a normal, healthy system!!!
' However, the bad / sad fact of the matter is that, even were you not in the position you're in, you couldn't use either keyboard or mouse when in Windows!
' I am able to (and have done - my Vista system is still configured successfully with 'em - I haven't removed them despite them being useless!) propperly pair both devices on Vista without much of a challenge - pretty standard fair actually... But that's all a smokescreen. Despite this - and despite being able to actually query each device over bluetooth for the services they provide and so on - they still cannot be actually used!!! No matter what, there is never any response from the OS to input or actions on either keyboard or mouse.
' <Shrugs> What can I tell ya. It does sound like Peter needs to move onto solving his bluetooth problem though anyways - in case this causes trouble for him (you) at some later date with devices that actually would be useful!
' Later!
~Menageryl
-Jack of All Trades, Master of Some!-
Message was edited by: Menageryl

Similar Messages

HT5636 I installed windows 8 Pro to my Mac 27', however am having a hardtime to pair the apple wireless keyboard in Windows operating system. Can anyone help?

I installed windows 8 Pro to my Mac 27', however am having a hard time to pair apple wireless keyboard with windows 8 pro. Can anyone help?

one have to go to osx and to it's bootcamp app
and make an usb stick with the apple drivers for windows
then one have to install them in windows to get the hardware working ok

Apple Wireless Keyboard under Windows 7 pairing but not responding

Hi all,
I'm having a strange issue getting my Apple Wireless Keyboard to run on my new HTPC under Windows 7 (64 bit). I can get Windows' bluetooth manager to detect the keyboard, and I can input the pairing code, following which Windows seems to install a bunch of drivers, but then I get no response from the keyboard at all.
The thing I find strange is that the keyboard works when I punch in the code numbers, but never before or after.
I also have a Magic Mouse which works perfectly.
Once paired and installed, the keyboard is displayed in Windows' driver manager as a "Bluetooth Peripheral Device", so I'm wondering if the issue is that Windows isn't recognising the device as a keyboard.
Does anyone have any suggestions? Thanks heaps, in advance.

After 3 frustrating hours of trying every tip on the net, I found the answer: Try this.
"This finally fixed it for me: Device Manager - Open System Devices, you will find a Bluetooth HID Device. Double Click it, open Driver tab and click "Update Driver" Select Browse my Computer, then "Let me Pick". It should now show TWO compatible drivers with exactly the same name. One of them is the Microsoft one, one is the non-working Chinese ****. Install one of them and see if the driver properties changed to the right (Microsoft) driver. If not, try again with the other one. For me, the Microsoft driver was the first one in the list, but this may be different for you. Wow, an annoying and intense hour of trouble shooting finally over..."
Source: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/window s-update-yi-ruan-bluetooth-hid-device-driver/5bfd0c92-1771-e011-8dfc-68b599b31bf 5?page=2&tm=1304484508563
The issue is related to the Chinese version of the driver that the latest windows update applies that stops the keyboard from working.
I'm typing this on the Apple Wireless Keyboard on Windows 7 64 bit on my PC. Finallly!

Apple Wireless Keyboard with Windows 7 on non Apple Hardware

Good Day,
I love the Apple Wireless Keyboard and it's the on I use when using my Thinkpad laptop as a desktop, meaning connected to an external Monitor and with an external keyboard and mouse. The Keyboard I use is an Apple Wireless Keyboard.
On my MBA 13 I use Windows 7 as my OS and the Apple lyouted keyboard works actually quite well with windows: The function keys perform very much like in Mac OSX with the volume, screen brightness, the fn+left or right for "home" or "end" etc.
Not I bought an Apple Wireless Keyboard to use in conjuction with my Thinkpad but all does features are missing. I guess that this has to to that on the MBA 13 the appropriate drivers where installed when the whole Bootcamp Software package was installed.
Since I obviously cant install the whole Bootcamp CD on non Apple Hardware, is there any way to just download somewhere the drivers for Apple KEyboards so the behave the same way as they would on a Mac running Windows?
Or is there any other way I could use my Apple Wireless Keyboard with non Apple Hardware the same way it behaves on my MBA 13 running Windows 7? Can somwhere lolely the Apple Keyboard drivers be downloaded?
I want to thank anyone who is kind enough to help mme with this mather in advance and please leave out comments of the kind that I it's my fault, I should have bought an Apple machine from the beginning. I have my reasons and If anyone can't handle that I kindly ask you to just ignore this post unless it's constructive and helpful contribution
Message was edited by: Apolloss

After 3 frustrating hours of trying every tip on the net, I found the answer: Try this.
"This finally fixed it for me: Device Manager - Open System Devices, you will find a Bluetooth HID Device. Double Click it, open Driver tab and click "Update Driver" Select Browse my Computer, then "Let me Pick". It should now show TWO compatible drivers with exactly the same name. One of them is the Microsoft one, one is the non-working Chinese ****. Install one of them and see if the driver properties changed to the right (Microsoft) driver. If not, try again with the other one. For me, the Microsoft driver was the first one in the list, but this may be different for you. Wow, an annoying and intense hour of trouble shooting finally over..."
Source: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/window s-update-yi-ruan-bluetooth-hid-device-driver/5bfd0c92-1771-e011-8dfc-68b599b31bf 5?page=2&tm=1304484508563
The issue is related to the Chinese version of the driver that the latest windows update applies that stops the keyboard from working.
I'm typing this on the Apple Wireless Keyboard on Windows 7 64 bit on my PC. Finallly!

Unable to pair Apple Wireless Keyboard in OS X 10.5.8

Hello everyone,
This is my first post here so if I mess it up, pls don't dog me too much...
I'm currently running OS X Tiger on a Dual PowerMac G5 2GHz with 3GB of RAM and all is well with the world. However, in an attempt to upgrade and become familar (more so) with OS X10.5 I've found that I am unable to pair with my wireless keyboard. I'm running 10.5 on a seperate drive. It sees the dongle, just won't pair with it. The Bluetooth dongle I'm using works fine in OS X 10.4.11, has for years. Any clues, is there something I'm missing?
I've read about Bluetooth issues with Leopard so I thought I would see if i could find an answer here. The keyboard is the original Apple wireless keyboard that came out a few years ago, Model M9270LL/A.
Hardware Overview:
Machine Name:    Power Mac G5
Machine Model:    PowerMac7,3
CPU Type:    PowerPC G5 (2.2)
Number Of CPUs:    2
CPU Speed:    2 GHz
L2 Cache (per CPU):    512 KB
Memory:    3 GB
Bus Speed:    1 GHz
Boot ROM Version:    5.1.8f7
Apple Bluetooth Software Version:    1.9.5f4
Hardware Settings:
PowerMac G5:
Address:    00-02-72-08-1e-0c
Manufacturer:    Broadcom
Firmware Version:    3.16389 (3.17166)
Bluetooth Power:    On
Discoverable:    Yes
HCI Version:    3 ($3)
HCI Revision:    16389 ($4005)
LMP Version:    3 ($3)
LMP Subversion:    17166 ($430e)
Device Type (Major):    Computer
Device Type (Complete):    Desktop Computer
Composite Class Of Device:    1057028 ($102104)
Device Class (Major):    1 ($1)
Device Class (Minor):    1 ($1)
Service Class:    129 ($81)
Requires Authentication:    No
Thanks for any help you folks might wish to provide me in advance.
Message was edited by: Onatopa

I don't think you're following me very well Mr Williams. I appreciate your attempt to assist and hopefully I won't come across as an **** here but, you're not helping. I will agree you, it seems to be a software issue...and it's called Leopard!
Let me explain something. I have not migrated this system, as per se, and for obvious reasons. The system has 2 HDD's. One has 10.4.11 on it and the other HDD has 10.5.8 installed. I can go from one to the other and it's the way I will continue to work until this problem has been resoved, if ever. I can NOT be productive without the Mac running, regardless of which OS. I'm attempting this because I have apps that must have Leopard, so I'm trying to make it work.
Just to be clear, I gave-up running OS X 10.3 several years ago but did not do so without kicking and screaming the entire way. Now, I'm comfortable with Tiger and I'm very glad I upgraded, as it's a much more stable OS but at this rate I'm about ready to give-up. I don't need Leopard and I don't want it, nor do I like the look and feel of it, I just wanted to try and attempt to upgrade and see if I could run some newer apps that won't run on Tiger. I will probably NEVER upgrade to an Intel Mac, even if I could afford to do so. And I will NEVER run Micro$oft Windoze on a Macintosh...period - EVER! That to me is just sacrilege...so just call me a purist, I care not. If I want to run that OS I'll do it on a PeeCee.
Back to the dicussion.
I'm typing this reply on the PowerMac running 10.4.11 using the keyboard in question and my Bluetooth dongle. And YES, the keyboard is the older, white keyboard. Did I not share the model # in the original post, Apple Keyboard model M9270LL/A ? Did you not Google that if you're not familiar with these Model numbers?
You said, "...Another thought: did you "unpair" the keyboard from the old system before trying to pair it with the new one?..." What exactly does that mean? That's makes no sense at all. "Can you "see" the keyboard in the bluetooth setup window when trying to set it up or not?" What does my original post say?? YES, I can see the keyboard in OS X 10.5.8, I just can not pair with it.
As a last resort I have installed the Apple Aluminum Keyboard Update, as per your suggestion, even though I don't have an aluminium keyboard and this 'update' installed successfully but my keyboard, although seen will still not pair with the dongle. I will NOT go buy a Al Keyboard just to test this issue. The only thing I've thought about purchasing is the Bluetooth module so that I don't need to use a dongle, but those are expensive and often hard to find. I have also removed the prefs file from /user/Library with no effect.
I almost forgot. I also have another BT dingle from Kensington and although the system sees it as does the other, it does not pair with the keyboard either. That dongle works fine on my PeeCee laptop without any problems, so both dongles are functioning correctly. Do you have any other suggestions you would like to share?
Thank you for your time.
< Edited By Host >

Apple Wireless Keyboard for Windows Vista

I recently bought an Apple Wireless Keyboard and a Kensington micro USB Bluetooth adapter for my Windows Vista laptop. The initial steps to configure the keyboard were straightforward and I did not run into any problems. Within a few hours after setting things up, I ran into the following problems:
a) The Apple Wireless Keyboard would disconnect randomly, sometimes mid-typing.
b) After functioning normally, a key (usually 'f') kept repeating.
The only way to solve both problems was to hold the power button on the side of the keyboard for a few seconds until the power light turned off. Then I had to hold down the power button again to turn it back on and it would automatically reconnect. The keyboard would work fine for a few minutes, only to have the same problems return later. The problems seemed to occur more frequently when I left the keyboard alone and did not use it for a few minutes.
The Solution
I become quite frustrated and was on the verge of returning the keyboard. As a final effort to fix things, I removed the Bluetooth drivers and reinstalled newer drivers. Here's how I did this:
1) Go to Start > Control Panel (Classic View) > Keyboard.
2) In the keyboard menu, select the 'Hardware' tab and select 'HID Keyboard Device'.
3) Click 'Properties' and then select 'Change Settings' and click 'Continue' at the security prompt.
4) Select uninstall.
5) Go back to the Control Panel and go to 'Programs and Features'. Locate the program you installed with your Bluetooth adapter. (Mine was Toshiba Bluetooth Stack. If your computer has built-in Bluetooth, you can probably skip this step.)
6) Uninstall the Bluetooth program.
7) Restart the computer.
Hopefully by this point, Windows will prompt you by saying that it has discovered new hardware and is installing the software for it. It should then display a Bluetooth icon in the notification area (bottom-right by clock). Right-click it and select add new device or view connected devices. Then simply run through the steps to connect your keyboard. Make sure you turn on the keyboard before you run through the setup.
After going through this procedure, I have not had any problems. The repeatings keys and disconnections have both subsided. Before playing around with the drivers, I suggest copying the drivers to a safe location or creating a Restore Point so you can always revert your changes.
Hope everything works out!

Hello,
I am having the exact problem you were having. Is it possible to apply Apple's new firmware update to the keyboard and have it function with the PC? I called the Applestore, and the sales rep told me that the keyboard did not save the firmware on the keyboard itself. Is this true?
Any and all help would be greatly appreciated.
Thanks!

Can i use Apple Wireless Keyboard and Apple Magic Trackpad with my macbook air 11" 2010

Can i use new Apple Wireless Keyboard and Apple Magic Trackpad with my macbook air 11" 2010?
thank
dean

Yes. Pair using Bluetooth with your MacBook Air.

Trouble pairing Apple Wireless Keyboard with N95. Please help.

I bought the new aluminium Apple Wireless Keyboard today and tried pairing it with my N95 (firmware v20.0.015) using the 'Wireless Keyboard" application but it refuses to connect!
Would anyone be kind enough as to shed some light on this issue I'm experiencing?

The process is quite simple:
- Turn Bluetooth 'on' in your N95 - Settings\Connection\Bluetooth\On.
- if your wireless keyboard is on, turn it off then on again. This will make it discoverable for 3 min.
- go to 'Wlss.keybd' app on your N95....Menu\Office\Wlss.keybd and open it.
- go to Option menu and select 'Find keyboard'. This will search for available bluetooth devices. Your keyboard name should show up here. When it does, you can press 'stop' so that the phone stops looking for additional devices.
- select the keyboard from the list of found bluetooth devices. You will then go through a sequence of code inputs on both your phone and keyboard (just follow the prompts on the phone) which will 'pair' your keyboard to your phone.
Hey presto, your phone should now be connected to your keyboard! Hope this works for you.
killkenny

Blue Screen of Death from Apple Wireless Keyboard in Windows 7

Hi all,
Situation: I have Windows 7 Professional 64 bit installed (boot camp) on my late 2008 MBP. Oftentimes, I'm plugged in to an LED Cinema display and work off of the Apple Wireless Keyboard & Magic Mouse. The Boot Camp partition / Drivers were originally installed from a Snow Leopard DVD. My Apple Software update reports that all my Apple Windows Software is up-to-date.
Problem: Since installing Windows 7 back in May, I've experienced the Blue Screen of Death (BSOD) 5 times. Each time has resulted from a key press on my bluetooth keyboard after it had been sitting idle for some time and presumably gone into power save mode. Any key press causes an instantaneous BSOD. It only occurs when I'm running windows and I'm working off my bluetooth keyboard so it's hard to replicate and likewise hard to troubleshoot and determine if a fix has worked.
*Error Details:* Here's some information I've extracted from the BSOD dump files.
IRQLNOT_LESS_OREQUAL
+The problem seems to be caused by the following file: ntoskrnl.exe+
+Technical Information:+
+* STOP: 0x0000000a (0xfffff80003032f00, 0x0000000000000002, 0x0000000000000008,+
0xfffff80003032f00)
+* ntoskrnl.exe - Address 0xfffff80002cbf600 base at 0xfffff80002c4f000 DateStamp+
0x4b88cfeb
Thanks for the help!
Paul

I'm experiencing the same problem with the BSODs while using my Apple wireless keyboard (latest model).
I'm running Windows 7 x64 and admit that I bypassed the BootCamp software/driver installation wizard after it complained that my model didn't support installation of the x64 drivers. Its a bit of a gray area, as my system is 64-bit capable and many services and applications run in 64-bit mode without my intervention.
Just curious if Windows 7 x86 users are experiencing these BSODs or is it a coincidence that you all are installing the drivers creatively.

How to disable "special" f-key function on Apple Wireless Keyboard in Windows 7

Hi. I dual-boot my iMac using an Apple Wireless Keyboard. In Mac OS's "Keyboard" system preference pane, I've chosen to treat the F-keys as actual F-keys, and not the "special" function keys, such as volume control and screen brightness. This however does not carry over to the Windows environment.
I cannot find an option to do this on the Windows 7 side. I've tried SharpKeys (popular Windows freeware key-mapping registry editor), however the program doesn't recognize the key being pushed (unless I hold the "Fn" key, at which point, it sees it as the F# key).
To reiterate, I'd like to know how to use the F1 through F12 keys as F1-F12 in Windows 7, without having to use the "Fn" key.

Hi alexia416,
If you would like to use your Apple keyboard in Boot Camp with the standard function keys as the default, you may find the following article helpful:
Boot Camp: Use the function keys on an Apple keyboard
For other keyboard-related Boot Camp issues, this article is also useful:
Boot Camp: About keyboards and key assignment for Microsoft Windows - Apple Support
Regards,
- Brenden

Apple Wireless Keyboard on Windows 7

Hi all--
I recently bought an Apple Wireless Keyboard for my pc at home, specifically inquiring at the Apple Store if it would be compatible with Windows.
I'm using a Dell Inspiron 1545 laptop-- and when I navigate to Control Panel > Hardware and Sound > Add device -- Windows is completely unable to find the keyboard.
My Macbook Pro has no trouble finding the keyboard, and from what I've read: there shouldn't be any trouble finding this device on Windows. What's going on here?

Hi alexia416,
If you would like to use your Apple keyboard in Boot Camp with the standard function keys as the default, you may find the following article helpful:
Boot Camp: Use the function keys on an Apple keyboard
For other keyboard-related Boot Camp issues, this article is also useful:
Boot Camp: About keyboards and key assignment for Microsoft Windows - Apple Support
Regards,
- Brenden

Can I use Apple wireless keyboard with Ubuntu ?

I wanna buy a Apple Wireless keyboard for my Dell Inspiron Laptop. I work in Ubuntu 11.04 . So I am asking whether I can use Apple Wireless keyboard and for that what I have to do.

The bluetooth one, yes. You can.

Can I pair my wireless keyboard with a PC?

I need to use a keyboard with my work laptop that unfortunately is a PC. Can I pair my MAC wireless keyboard and mouse to my PC?

Use a KVM switch.

Can I use apple wireless keyboard with ipad?

Well hello there,
I have a simple question to Apple Communities.
Can I use the Apple wirelless keyboard with ipad?
Does is it works fine?
I've never tested nor asked anyone.
Thank you guys.
Erick Felix

The bluetooth one, yes. You can.

What is the process for re-pairing apple wireless keyboard to new computer?

I've moved from an iMac running 10.6.8 to a new mini with 10.7. I want to use my old keyboard, but the mini cannot "find" the device in system preferences. I have turned off the keyboard on my iMac, though I suspect that it requires more to actuall un-pair the keyboard.

Hello:
You need to delete the KB from the iMac.
Barry

Can't pair apple wireless keyboard in Windows

Similar Messages

Maybe you are looking for