Can't paste artwork after upgraded...

Can't paste artwork in "Multiple Item Information" after upgraded to the latest version!
Have to Add artwork in single song info.

Hi All,
Thanks for the reply. I used to copy the image from FireFox "Copy Image" or copy the image from Photoshop and just paste into the "Artwork" box in "Multiple Item Information". It always OK but now it just appear the tick only and blank in the box.
One time I tried copy image from ACDSee, it worked!!! It can paste from ACDSee!!!
I'll try "drag & drop" the image into the artwork box when I get home tonight, where I work is using MAC, can't test here.
Thanks a lot!

Similar Messages

  • Can´t open LR after upgrade to 5.3 without entering a licens key

    Can´t open LR after upgrade to 5.3 without entering a licens key

    I have seen comments from someone who indicated that every time they started Lightroom they were prompted for the serial number, even though they had already entered it. Is this your situation? I can't remember what the solution is, but I have seen that problem mentioned in the past.

  • I can't use firefox after upgrading to 4.0. I get the message I have to restart my computer for upgrading, but ik doesn't start. I get the message over and over

    I can't open firefox after upgrading to 4.0
    I get the message over and over again that i have to restart my computer for upgrading to firefox.
    I tried new installation. But i got problems on all my accounts

    Start your '''Computer''' in safe mode. Then start Firefox. Try '''Safe''' web sites.
    Starting The Computer In Safe Mode;
    If running, turn your computer off.
    Remove any disks and thumb drives that are in your hard drives or ports.
    Now start your computer but also;
    '''Windows; '''Press the <F8> key repeatedly.
    '''Mac: '''Hold down the Shift key.
    '''Linux; '''Using the command line, Linux/Unix computers can be booted
    into various run levels that determine which resources are loaded.
    For example, "runlevel 1" is typically the equivalent to Windows and
    Mac safe modes.
    * Source; '''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Safe Mode; Free Online Encyclopedia]'''
    When the '''Boot''' menu is displayed, release the key you were pressing.
    You must now choose what mode to use. The most used are;
    * Safe Mode; The computer runs with only a minimum set of programs.
    * Safe Mode '''With '''Networking; Same as above, but with internet access.

  • Can't launch color after upgrading to OS 10.5

    I can't launch color after upgrading to OS 10.5. The message shows " Unable to initialize OpenGL. Make sure Video Desktop is disable." Can anyone help please?

    Click here and follow the instructions.
    (46092)

  • Can't open Pages after upgrading to snow leopard on 10.6.8

    Can't open Pages after upgrading to snow leopard on 10.6.8

    Has Spotlight finished its indexing?  Check in the upper right.  If you get just the search field, it has, if it says its indexing, you have to wait before you can use anything.

  • I have an Epson Perfection V100 scanner and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

    I have an Epson Perfection V100 scanner and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

    Check the Epson web site for updates to drivers and Epson scan software.

  • WiSM can't function normally after upgrading from vesion 6.0.182 to 7.0.220.

    I have a WiSM installed in WS-6504E, vesion 6.0.182. It can't function normally after upgrading to version7.0.220.
    When it was unstable, I found three strange condition
    1. A lot of log looks like this
    *osapiReaper: Mar 10 14:53:39.282: %OSAPI-3-FILE_OPEN_FAILED: osapi_file.c:370 Failed to open the file : /proc/1059/stat.(erno 24)
    *osapiReaper: Mar 10 14:53:39.282: %OSAPI-3-TASK_GETTIME_FAILED: osapi_task.c:3431 Failed to retrieve statistics (/proc/<pid>/stats) for task 'fmcHsTask'
    2. Internal Temperature was showed "sensor failed"
    3. CPU User load is Zero
    Anybody can tell me what wrong with the wireless controller ?

    Could be a hardware failure.

  • I can't load modules after upgrade

    I can't load modules after upgrade xfree 4.4.0-2, gcc 3.4.0-1, perl 5.8.4-1 and kernel 2.6.5-3.I don't have even access to the internet from Arch.System says that modules have invalid version.
    What can I do now?

    You were right robot5x. After command lilo I have got modules loaded properly.Thanks.

  • HT3669 I have an Epson Perfection V100 and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

    I have an Epson Perfection V100 and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

    Check the Epson web site for updates to drivers and Epson scan software.

  • I have just dowloaded iTunes new version 10.4 (on Windows), and I can't paste artwork from Word anymore, only directly from the net (where the size or the quality are not always optimal). Any way around this?

    I have just dowloaded iTunes new version 10.4 (on Windows), and I can't paste any artwork from Word anymore, only directly from the net (where the size or the quality of the images is not always optimal). Major problem given that I'm in the process of re-ripping some 40K+ songs in Lossless format... Any way around this?

    Peter Hah
    After spending another two days on pinning down the iTunes 10.5 blank store page problem, here's the solution to be found: https://discussions.apple.com/thread/3372617?start=0&tstart=0
    Look out for "japiohelp".
    In short:
    a) press Windows key + "R", enter "cmd", and press Ctrl+Shift+Enter (= runs as admin)
    b) enter "netsh winsock reset" and pres enter
    c) reboot the computer
    and Bob's your uncle.
    P.

  • Can't open project after upgrade

    Hi
    After upgrading from iMovie 9 to iMovie 11, i have a project that i can't open any more. When i choose it in the project library the preview window freezes and the "edit project" button fades out so that I can't open it.
    Any one else got the same problem or know how to fix it.

    Hi I have the same problem. Did you manage to find a solution?
    Thanks

  • Can't log in after upgrading to mavericks

    After upgrading to Mavericks, I at first seemed to lose the 2nd HD (all data), then list the ability to log in
    Help!

    If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
    Otherwise*, boot into Recovery mode. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. In the window that opens, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
    Select
     ▹ Restart
    from the menu bar.
    You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
    *Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.

  • I can't hear sound after upgrading to lion

    I have this little annoying problem with my iMac after upgrading to Lion OSX. After waking up my iMac I can't hear any sound from internal speakers, ie: only video on Youtube, but no sound, but whilst pressing volume up/down button I can hear beep. When it happens So I have to restart system everytime it happens. Anyone any ideas or maybe someone out there has the same problem?

    I'he double checked everything, only 1 output device (internal speakers). As I said before, it is weird because I can play iTunes and can hear "beep", but neither youtube sound, nor game sound or internet radio seems to be working, no sound whatsoever. But this time system didn't go to sleep, it has just happened suddenly.... Restart again then!

  • I can't update packages after upgrading pacman to 4.0.3

    I know this was already treated broadly about two months ago, but I can't update after upgrading pacman because of continuous problems with certain signatures (at least one).
    I have already tried this:
    rm -rf /etc/pacman.d/gnupg
    pacman -Scc
    pacman-key --init
    pacman-key --populate archlinux
    But I still get this error when trying to upgrade the system:
    error: virtuoso: signature from "Andrea Scarpino (Arch Linux) <[email protected]>" is invalid
    error: failed to commit transaction (invalid or corrupted package)
    Errors occurred, no packages were upgraded.
    Could anybody help me? I'm pretty devastated with this.
    Thanks!
    My /etc/pacman.conf
    # /etc/pacman.conf
    # See the pacman.conf(5) manpage for option and repository directives
    # GENERAL OPTIONS
    [options]
    # The following paths are commented out with their default values listed.
    # If you wish to use different paths, uncomment and update the paths.
    #RootDir = /
    #DBPath = /var/lib/pacman/
    #CacheDir = /var/cache/pacman/pkg/
    #LogFile = /var/log/pacman.log
    #GPGDir = /etc/pacman.d/gnupg/
    HoldPkg = pacman glibc
    # If upgrades are available for these packages they will be asked for first
    SyncFirst = pacman
    #XferCommand = /usr/bin/curl -C - -f %u > %o
    #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
    #CleanMethod = KeepInstalled
    Architecture = auto
    # Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
    #IgnorePkg =
    #IgnoreGroup =
    #NoUpgrade =
    #NoExtract =
    # Misc options
    #UseSyslog
    #UseDelta
    #TotalDownload
    CheckSpace
    #VerbosePkgLists
    # By default, pacman accepts packages signed by keys that its local keyring
    # trusts (see pacman-key and its man page), as well as unsigned packages.
    #SigLevel = Optional TrustedOnly
    # NOTE: You must run `pacman-key --init` before first using pacman; the local
    # keyring can then be populated with the keys of all official Arch Linux
    # packagers with `pacman-key --populate archlinux`.
    # REPOSITORIES
    # - can be defined here or included from another file
    # - pacman will search repositories in the order defined here
    # - local/custom mirrors can be added here or in separate files
    # - repositories listed first will take precedence when packages
    # have identical names, regardless of version number
    # - URLs will have $repo replaced by the name of the current repo
    # - URLs will have $arch replaced by the name of the architecture
    # Repository entries are of the format:
    # [repo-name]
    # Server = ServerName
    # Include = IncludePath
    # The header [repo-name] is crucial - it must be present and
    # uncommented to enable the repo.
    # The testing repositories are disabled by default. To enable, uncomment the
    # repo name header and Include lines. You can add preferred servers immediately
    # after the header, and they will be used before the default mirrors.
    #[testing]
    #SigLevel = PackageRequired
    #Include = /etc/pacman.d/mirrorlist
    [core]
    SigLevel = PackageRequired
    Include = /etc/pacman.d/mirrorlist
    [extra]
    SigLevel = PackageRequired
    Include = /etc/pacman.d/mirrorlist
    #[community-testing]
    #SigLevel = PackageRequired
    #Include = /etc/pacman.d/mirrorlist
    [community]
    SigLevel = PackageRequired
    Include = /etc/pacman.d/mirrorlist
    # An example of a custom package repository. See the pacman manpage for
    # tips on creating your own repositories.
    #[custom]
    #SigLevel = Optional TrustAll
    #Server = file:///home/custompkgs
    Last edited by [DoodoM] (2012-08-03 23:39:56)

    Thanks everyone! I guess it was a faulty mirror.
    I also had problems upgrading glibc because /lib had to be linked to /usr/lib, but I fixed it seeking for helpful tips on the forum. What I did was move everything from /lib to /usr/lib, shutdown, start adding break=postmount to kernel line, mount the filesystem, remove /lib folder, link /usr/lib to /lib and reboot. Then I reinstalled glibc and everything went well.
    Now some fonts look half-cutted in Gnome Shell when the window or panel which contains them is in background and I don't know why. But it is not the first time I have "graphical artifacts" with Arch Linux on this laptop. I think has something to do with the compositing.

  • Can't share videos after upgrade to iTunes 7.2

    I share videos wirelessly from my iMac to my MacBook Pro which is connected to my widescreen LCD in my living room.
    Using Frontrow, after upgrading to 7.2, I now get the message: "This shared video cannot be played. The shared video server may be having problems playing video."
    Shared photos and music still play fine.
    I've rebooted everything including my Linksys router.
    There was no problem playing my shared videos this way with iTunes 7.1
    Anyone else having a similar problem, or can anyone offer a hint or solution?
    thanks, Chuck

    We are working getting a resolution to this issue as well.
    http://discussions.apple.com/thread.jspa?threadID=980231
    Joe

Maybe you are looking for