Can't perform any functions on my new drive from Raid admin?
I had a drive go bad in my Raid, (amber light) raid admin stated that the array was degraded and the drive was unknown.
I ordered a new drive (same type of drive) inserted new drive and a red light was above disk slot and the data would not rebuild automatically. In Raid admin it stated that the drive was not installed but that the disk was online in the events log. (that seemed conflicting to me)
I placed the old disk back in just for giggles to see if I could do anything with rebuilding parity data and none of the functions in the utility will let me do anything, Raid admin only shows that I have 3 disks in my array. It will not include the 4disk as part of the array. It says alredy belongs to ma raid set but will not let it be included with raid 1
If I have another disk go bad I am sunk.
I am fairly new at messing with raid set ups. I know we are set up with a RAID 5 with 4 disks.
I am just nervous to do anything with the data I already have thinking I am gonna wipe something out.
Any suggestions would be great.
Have you read this post? may help you
https://discussions.apple.com/message/18149044#18149044
Similar Messages
-
I can not save any data to external hard drive from my mac pro. Is there anyone can help me in this regard?( note, when i first plug my ext. drive to mac i chose option to backup later)
The device may be formatted for Windows, as NTFS. The format is readable, but not natively writable on a Mac. To write to the device, you must either reformat it (erasing all the contents) or install third-party software to enable write access to NTFS.
-
I'm new to Ipad 2. I can bring up a website, but I can't make it active; i.e., perform any functions within the website. I cannot make the screen move -- nothing. Help!!
Can you navigate http://www.apple.com ?
Without knowing your credit union's web site it is hard to tell what the problem is.
Note that sites that use Flash will have problems as it is not supported. -
My computer crashed. So does this mean I can not add any more music to my ipod from a different computer without all the songs being erased? The ipod works fine and now i got a new computer. So it seems like my only options are leaving my ipod in a state where i cant add anymore songs or erasing all my songs and trying to use my ipod from my new computer. Can someone please inform me on how to have my ipod work from a different computer, even if i have to erase my songs. Thanks.
Yes, if you choose the Erase and Sync option (or restore your iPod) you will be allowed to sync your iPod with the new computer.
If you would like to save the content that's currently on your iPod, see this older thread from another forum member Zevoneer discussing the different ways to copy the content on an iPod back to your PC.
https://discussions.apple.com/thread/2417169?start=0&tstart=0
B-rock -
Okay i had to install Itunes onto my new OS because window's Vista messed up on me and i can't get any of my old purchases back from my account such as music and movies any ideas on how to get them back (i do not have the folder that contains old items from the last itunes or anything from that OS because it had a virus and i just wanted windows 7)
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Hope this helps,
JD -
I just got a new macbook. Is there any way I can transfer pictures or music to this new mac from my old one?
Welcome to Apple Support Communities
There are different ways to transfer your data from another Mac, but as you just want to transfer pictures and music, the best way is to use an external drive. You can also connect them with a Thunderbolt or FireWire cable, but you need specific Macs to do it, so I prefer the external drive method.
You just have to get an external drive and plug it to the old Mac. Then, open Finder, navigate to the folders with your pictures and music, and drag them to the external drive in the Finder sidebar, under "Devices".
Then, connect the external drive to the new Mac and you will see the external drive in the Finder sidebar after opening a Finder window, so choose it. Then, just copy the pictures and music to the folder you want, for example, Music or Pictures -
I cannot perform any function such as opening emails in my hotmail
I'm able to sign in, although my sign in screen looks totally different now. I am unable to perform any function once I've signed in.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]] -
Hello Collective Wisdom,
I have a MacBook Pro from mid-2009 and have recently experienced some problems. There's an above-average bootup time, and whenever I try to perform any functions (say, open a browser window, go into Finder, launch an app, try to type a URL, search for anything), the Spinning Ball of Death comes up for about 5-7 minutes before the function resolves.
I've been able to get into Disk Utility and it suggested I use Command + R at the bootup screen to do a HD Repair, which I did. But the problem is still occuring.
What do I Do?The next time you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
I can't download any apps on my new i device because I forgot the security question answers. How to I get the answers back? Help plz
Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
1. Go to: Apple Express Lane;
2. Under Product Categories choose iTunes;
3. Then choose iTunes Store;
4. Then choose Account Management;
5. Now choose iTunes Store Security and answer the bullet questions, then click
Continue;
6. Sign in with your Apple ID and press Continue;
7. Under Contact Options fill out the information and advise iTunes that you would
like your security/challenge questions reset;
8. Click Send/Continue.
You should get a response within 24 hours by email.
In the event you are unsuccessful then contact AppleCare - Contacting Apple for support and service.
Another user had success doing the following:
I got some help from an apple assistant on the phone. It is kind of round about way to get in.
Here is what he said to do and it is working for me...
a. on the device that is asking you for the security questions go to "settings", > "store" >
tap the Apple ID and choose view"Apple ID" and sign in.
b. Tap on payment information and add a credit/debit card of your preference then select
"done", in the upper right corner
c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
should be asked to verify your security code for the credit /debit card and NOT the
security questions.
d. At this time you can remove the card by going back in to edit the payment info and
selecting "none" as the card type then saving the changes by selecting "done". You
should now be able to use your iTunes store credit without answering the security
questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends! -
Firefox 4 is extremely slow to perform any function on my lap top compared to previous versions. Why? And how do I change this!
Firefox 21 and Firefox 22 running on Windows 7 have been reported to take a long time to "wake up" from sleep. I realize hibernation is different than sleep, but... this is the closest match for your description.
Some users have reported that this problem is resolved in Firefox 23 (currently in beta). Others have had inconsistent luck with minimizing Firefox before letting Windows sleep and other measures.
Please check out this (very long) thread for more information: [https://support.mozilla.org/questions/961898 browser freezes after resuming from sleep]
Or jump to the part about Firefox 23: https://support.mozilla.org/questions/961898?page=3#answer-457321
The fact that this just started recently suggests perhaps it is related to another program or update, but I don't think anyone has confirmed the exact interaction that causes the problem. -
Hi therde I was wondering if you could please help me with my Iphone 4s as it has frozen so i am unable to swipe to either power off or perform any function at all.
RESET DEVICE
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost). -
Can you please how to retrive the new netprice from the new validity period
Hi,
When you display a contract using ME33K and you click on a item and view its conditions(shift+F6), there might be 2 validity periods for a given item.
and each period will have different netprice in it.
One will be old date before the PO was created and the other new one which has validity till 31.12.999..We want to fetch the netprice for the new validity date but currently the program is fetching this data from the table EKPO which is having the netprice of the old date only..
Can you please how to retrive the new netprice from the new validity periodThank you so much.
But I need more help specific to my problem.
Let me describe the same.
Suppose the PO creation date is 04.07.2007
The conditions for an item in a contract for the PO are as follows;
1. Validity from 04.07.2007 validity to 04.07.2007 Netprice = 100.00
2. Validity from 05.07.2007 validity to 31.12.9999 Netprice = 200.00
We need to always fetch the netprice from the validity period which always matches with the PO creatio date. here the value 100.00 should be the correct netpr as the PO creation date matches with the first validity period.
But the program is fetching the netprice 200.000 which belongs to the second validity period. That is beacuse the select statement which fetches the data for contracts collects on the basis of EKKO-kdate and ekko-kdtab.the fields kdate and kdtab retrieves the validity period of the contract which is from 04.07.2007 to 31.072007. This data is then used to retrieve the netpr data from EKPO and it fetched 200.00 as it retrives the netprice of current data in contract validity and h not with respect to PO creation date.
This data is then used to fetch the get the netpr data from EKPO.
<u>what we need is the netprice for that validity period of item(Conditions) that matches with the PO creation date</u>..
Below is the code where I'm selecting the data from ekko and ekpo for the contracts data..Can you please add the code snippet to the below attachesd subroutine to get the required data from KONV and KONP so that we can retrieve the correct Netprice.
FORM select_contracts USING p_s_cebeln LIKE s_cebeln[]
p_c_k_bstyp TYPE ebstyp
p_p_bukrs TYPE bukrs
p_p_ekorg TYPE ekorg
p_p_ekgrp TYPE bkgrp
*Begin of Mod-004
fp_p_cernam type ty_r_ernam
p_p_cernam TYPE ernam
*End of Mod-004
p_s_werks LIKE s_werks[]
p_s_matnr LIKE s_matnr[]
p_s_lifnr LIKE s_lifnr[]
p_s_val_dt LIKE s_val_dt[].
*mod-002
data : l_amount type BAPICURR_D, " Net price
l_waers TYPE waers, " Currency Key
l_eff_amount type BAPICURR_D. " Effective value
data: l_v_netpr type bprei.
*mod-002
SELECT ebeln
bukrs
bstyp
aedat
ernam
lifnr
zterm
ekorg
ekgrp
waers
wkurs
<b>kdatb
kdate</b>
inco1
INTO TABLE i_ekko
FROM ekko
WHERE ebeln IN p_s_cebeln
AND bstyp EQ p_c_k_bstyp
AND bukrs EQ p_p_bukrs
AND ekorg EQ p_p_ekorg
AND ekgrp EQ p_p_ekgrp
*Begin of Mod-004
AND ernam EQ p_p_cernam
AND ernam IN fp_p_cernam
*End of Mod-004
AND lifnr IN p_s_lifnr
AND ( kdatb IN p_s_val_dt OR kdate IN p_s_val_dt ).
IF sy-subrc EQ 0.
Populates internal table i_ekpo using EKPO table.
SELECT ebeln
ebelp
loekz
txz01
matnr
werks
ktmng
menge
meins
bprme
netpr
peinh
webaz
mwskz
uebto
untto
erekz
pstyp
knttp
repos
webre
konnr
ktpnr
ean11
effwr
xersy
aedat
prdat
INTO TABLE i_ekpo
FROM ekpo
FOR ALL ENTRIES IN i_ekko
WHERE ebeln = i_ekko-ebeln
and aedat = i_ekko-aedat
AND werks IN p_s_werks
AND matnr IN p_s_matnr.
LOOP AT i_ekpo INTO rec_ekpo.
MOVE rec_ekpo-ebeln TO rec_contr-ebeln.
MOVE rec_ekpo-ebelp TO rec_contr-ebelp.
MOVE rec_ekpo-loekz TO rec_contr-loekz.
MOVE rec_ekpo-txz01 TO rec_contr-txz01.
MOVE rec_ekpo-matnr TO rec_contr-matnr.
MOVE rec_ekpo-werks TO rec_contr-werks.
MOVE rec_ekpo-ktmng TO rec_contr-ktmng.
MOVE rec_ekpo-menge TO rec_contr-menge.
MOVE rec_ekpo-meins TO rec_contr-meins.
MOVE rec_ekpo-bprme TO rec_contr-bprme.
MOVE rec_ekpo-netpr TO rec_contr-netpr.
move l_v_netpr TO rec_contr-netpr.
mod-002
read table i_ekko into rec_ekko with key
ebeln = rec_ekpo-ebeln.
l_waers = rec_ekko-waers.
CALL FUNCTION 'BAPI_CURRENCY_CONV_TO_EXTERNAL'
EXPORTING
currency = l_waers
amount_internal = rec_contr-netpr
IMPORTING
AMOUNT_EXTERNAL = l_amount.
rec_contr-netpr = l_amount.
mod-002
MOVE rec_ekpo-peinh TO rec_contr-peinh.
MOVE rec_ekpo-webaz TO rec_contr-webaz.
MOVE rec_ekpo-mwskz TO rec_contr-mwskz.
MOVE rec_ekpo-uebto TO rec_contr-uebto.
MOVE rec_ekpo-untto TO rec_contr-untto.
MOVE rec_ekpo-erekz TO rec_contr-erekz.
MOVE rec_ekpo-pstyp TO rec_contr-pstyp.
MOVE rec_ekpo-knttp TO rec_contr-knttp.
MOVE rec_ekpo-repos TO rec_contr-repos.
MOVE rec_ekpo-webre TO rec_contr-webre.
MOVE rec_ekpo-konnr TO rec_contr-konnr.
MOVE rec_ekpo-ktpnr TO rec_contr-ktpnr.
MOVE rec_ekpo-ean11 TO rec_contr-ean11.
MOVE rec_ekpo-effwr TO rec_contr-effwr.
mod-002
CALL FUNCTION 'BAPI_CURRENCY_CONV_TO_EXTERNAL'
EXPORTING
currency = l_waers
amount_internal = rec_contr-effwr
IMPORTING
AMOUNT_EXTERNAL = l_eff_amount.
rec_contr-effwr = l_eff_amount.
*mod-002
MOVE rec_ekpo-xersy TO rec_contr-xersy.
APPEND rec_contr TO i_contr.
CLEAR: rec_ekpo,rec_contr.
mod-002
CLEAR : rec_ekko,l_amount, l_eff_amount,l_waers.
mod-002
ENDLOOP.
Modifying i_contr using i_ekko.
SORT i_ekko BY ebeln.
LOOP AT i_contr INTO rec_contr.
READ TABLE i_ekko INTO rec_ekko WITH KEY
ebeln = rec_contr-ebeln
BINARY SEARCH.
MOVE rec_ekko-bukrs TO rec_contr-bukrs.
MOVE rec_ekko-bstyp TO rec_contr-bstyp.
MOVE rec_ekko-aedat TO rec_contr-aedat.
MOVE rec_ekko-ernam TO rec_contr-ernam.
MOVE rec_ekko-lifnr TO rec_contr-lifnr.
MOVE rec_ekko-zterm TO rec_contr-zterm.
MOVE rec_ekko-ekorg TO rec_contr-ekorg.
MOVE rec_ekko-ekgrp TO rec_contr-ekgrp.
MOVE rec_ekko-waers TO rec_contr-waers.
MOVE rec_ekko-wkurs TO rec_contr-wkurs.
MOVE rec_ekko-kdatb TO rec_contr-kdatb.
MOVE rec_ekko-kdate TO rec_contr-kdate.
MOVE rec_ekko-inco1 TO rec_contr-inco1.
MODIFY i_contr FROM rec_contr.
ENDLOOP.
ENDIF.
REFRESH: i_ekko,
i_ekpo.
CLEAR : rec_ekko,
rec_ekpo,
rec_contr.
ENDFORM. "select_contracts
Thanks. -
I can not print from Canon IR5050 after installing Maverick. I downloaded new driver from Canon with no luck.
I'm almost completely certain that the scanning feature worked before the update. Having said that though, I don't scan a great deal and it may be the case that when I have done, the printer was directly connected to the MBP. However, since I have a laptop it's far more logical that I would have had the printer connected to Airport Express for reasons of portability so I can't really see that I would have had the printer connected directly to the laptop. Besides this, I have no memory of having this problem previously. Therefore, I don't think my memory is to blame although of course, if it were I'd have no way of knowing!
J. -
I have some troubles recently with Final Cut Pro 7 and would like to remove my preferences. I can't find any "com.apple.finalcutpro.plist" file from the Preferences folder but I do have some preferences. So, where could be the file ?
Digital Rebellion has you covered: http://www.digitalrebellion.com/prefman/
-
How do I remove one failing hard drive from raid set and replace with new one
Last Friday apparently one of my raid drives started failing.
As I mentioned on this forum I started getting continous beeping.
I was finally able to get the raid working at a degraded level. I ordered a replacement hard drive which is arriving today.
(In the meantime I made twice daily backups of my work.....)
Below was the message I got from the browser based raid software:
Blahblah 09 1000.2GB RaidSet Member SamSung HD103SJ
Blahblah 10 1000.2GB Free SamSung HD103SJ
Blahblah 11 1000.2GB RaidSet Member SamSung HD103SJ
Blahblah 12 1000.2GB RaidSet Member SamSung HD103SJ
(See this earlier thread if you wish!)
http://forums.adobe.com/thread/727867?tstart=0
At one point when I did the checked the browser interface I saw the message Failed and Degraded
As I said, I was able to work over the weekend on the degraded system.
This morning I got the beeping again and did the rescue and now I am running a "full raid" without the notice that one raid was "Free".
In any case, the new hard drive is arriving today.
What steps should I take to incorporate the new drive into the raid system.
I have one OS drive
and 4 tb raid drives. One needs to be replaced with the new one that I am getting today.
Thanks
RowbyHarm,
Regarding your comment:
Re: How do I remove one failing hard drive from raid set and replace with new one
Please tell me how to read the serial number from an individual drive rather easily, without un-installing them:
If you select the proper drive to change out, you only need to remove one drive and look at its serial number...
Step 1: Identify bad drive serial number using Areca's tools
Step 2: Turn off the computer
Step 3: Remove what you think is the bad drive based on following your numbered cable method, marked hot-swap bays, whatever
Step 4: Verify that the serial number matches the "bad drive" serial number from step 1; if it does great, proceed; if it does not match, go back to step 3
Step 5: Change out the CORRECT drive - that's the bottom line for this whole procedure
Cheers,
Jim
Maybe you are looking for
-
Paying for Skype Premium using a Purchase Order/In...
Hi, Our University would like to pay for a Skype Premium account using a Purchase Order system - i.e. we send out a Purchase Order to Skype, Skype sends an invoice, and we then send payment to Skype. Would this be possible, or is there an email addre
-
The error window is titled 'Update failed" and I quoted the message in the window in my question. I don't know what software is trying to update or why this message appears. I contacted my ISP and they told me to contact Mozilla. Thanks for any help.
-
Hi I am using Oracle Developer 6i. I created a chart in Oracle graphics and linked it with my forms & reports. I used a Symbol in my chart. In case of reports, the preview of the report containing chart comes absolutely perfect. But when i print it o
-
Just using part of a song?
I've been watching the tutorials on how to place background music on to my imovie but I cant work out how to select just a part of a song and place it with the correct photo or video clip. Can anyone help? Many thanks
-
Error when updating. (NSURLErrorDomain erro -3001.)(102)
I got this message when updating programs. Any suggestions?