Can't Place image in AP div

Something's definately gone wrong.......I have a page on
which I placed an AP div. I've attempted to pull a jpeg image into
the div and no go....I've done this before, but for some reason I'm
getting the little circle with the line across it as I start
pulling the jpeg onto the page.
Any suggestions?
Thanks - David Bird

Let's see the page....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"mobirdman" <[email protected]> wrote in
message
news:fk6q6u$r8f$[email protected]..
> Something's definately gone wrong.......I have a page on
which I placed an
> AP
> div. I've attempted to pull a jpeg image into the div
and no go....I've
> done
> this before, but for some reason I'm getting the little
circle with the
> line
> across it as I start pulling the jpeg onto the page.
>
> Any suggestions?
>
> Thanks - David Bird
>

Similar Messages

I can't place images from Photos into InDesign since updating to Yosemite 10.10.3. Is this an Apple issue or an Adobe one?

I can't place images from Photos into InDesign since updating to Yosemite 10.10.3. Is this an Apple issue or an Adobe one? It used to be a simple process with iPhoto but not anymore.

Thanks Steve. I should have mentioned that I’m still using CS6. Wonder if that’s the difference? All I get in the sidebar is Photo Booth which is useless.
vann jennings
creative director
[email protected]
chemistry
3918 River Rd.
North Topsail Beach NC 28460
cell: 412-298-8275
Henry W. Oliver Building
535 Smithfield St.
Suite 230
Pittsburgh PA 15222
phone: 412.642.0642
www.visitthelab.com

How can I place image across outside of booklet?

I am currently engaged in my annual task of designing a 24 page A5 booklet using folded A4 paper. All the internal portrait mode A5 pages (pages 2 - 23) are monochrome and have been created in InDesign CS6, while the colour outer cover (pages 1 and 24) has been designed as a single landscape A4 page in Adobe Illustrator CS6. This allows graphic images to flow seamlessly between the front cover and the back cover.
My normal practice has been to print this booklet myself, using an inkjet printer for the colour content and a mono laser printer for everything else. I print directly from Illustrator for the double-spread outer cover and use InDesign's 'Print Booklet' facility for all the internal pages.
This year, I am seriously considering getting the booklet produced by a commercial printer, who would use a colour laser printer for the entire booklet. I therefore want to merge the Illustrator artwork into my Indesign file so that I can generate a single PDF for sending to the print shop.
I'm guessing that there is a simple way to import the cover artwork into InDesign but, so far, I have been unable to find a way to place a file across pages 1 and 24. Any help would be much appreciated.
David

Yes, I confused my left with my right. I am indeed sticking with a conventional booklet reading direction!
On reflection, our processes are slightly different but both may have advantages in different situations. Unless there is some clever trick for placing an image in a specific place, your process would always require careful repositioning of the cover artwork on Page 1 before copying and Pasting in Place on Page 24. My method used Paste in Place on both Page 1 and Page 24 and no position adjustment was necessary. The disadvantage of my process (which I forgot when I claimed it was more efficient) is the necessity of the prior step required to copy the cover artwork image into the Windows clipboard.
I suspect you are now going to tell me an easy way to Place the image on Page 1 so that it preserves the same X/Y co-ordinates as it had in Illustrator ...
David

How can I move image in a div box on hover?

I have an image 50 x 1000 (tall/thin)
The div is 50 x 500
Now what I need is for the top half of the image to show only when the div is displayed normally, The rest of the image needs to be concealed.
But when I hover over the said div I need the image to slide up to show the bottom half within the same div.
I have toyed with clipping and absolute positioning but no joy
Thanks in advance ofr any feedback.
Terry

I actually updated the code in my post to make the ids into reusable classes, just in case you wanted more than one image, but it looks like you grabbed it before I made the change. Use that newer code with classes and add a wrapper element to contain the now floated <div> slide-containers (the bold parts below)...
<!doctype html>
<html lang="en-us">
<head>
<meta charset="utf-8">
<title>Image slides in on hover</title>
<style>
#wrapper {
    width:150px;
    margin:0 auto;
.slide-container {
    position: relative;
    height: 500px;
    float:left;
    width: 50px;
    overflow: hidden;
.sliding-image {
    position: absolute;
    bottom: -500px;
    -webkit-transition: bottom 500ms; /* half a second to transition, might want to up that to 1s-2s */
    transition: bottom 500ms;
.sliding-image:hover {
    bottom: 0px;
</style>
</head>
<body>
<div id="wrapper">
<div class="slide-container"> <img class="sliding-image" src="your-image1.jpg"> </div>
<div class="slide-container"> <img class="sliding-image" src="your-image2.jpg"> </div>
<div class="slide-container"> <img class="sliding-image" src="your-image3.jpg"> </div>
</div>
</body>
</html>

Can't place images in Joomla 1.5 content editor

Since upgrading to FF3.6.10, when placing an image in content editor in Joomla 1.5 website(s) the image is not placed and only a short section of code is visible in the html view after completing task as below;
..(img border="0" /)
Reverting to earlier version of FF resolves this and everything works normally, testing the same function of other editors is satisfactory and images place correctly.
Not sure if this error is relative, but was displayed when the problem was noticed.
Error: Async statement execution returned with '11', 'database disk image is malformed'
Source File: file:///Applications/Firefox.app/Contents/MacOS/components/nsPlacesDBFlush.js
Line: 312

Copy and Paste this code in the Code field in the "Tools > Error Console" and click the "Evaluate" button to cleanup and compress the places.sqlite database file.
<pre><nowiki>Components.utils.import("resource://gre/modules/PlacesDBUtils.jsm");PlacesDBUtils.checkAndFixDatabase();</nowiki></pre>
If that gives the same error then see http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

Can't place image with CS6

Recently updated to CS6 but one thing very frustrating is that File>Place does not work. When I select it a window will pop up, but as soon as I select any image from the window the entire Illustrator application stops working.
I was forced to switch back to CS5. Is it just me or anyone has same problem?

You might start by looking here.
http://forums.adobe.com/thread/1038551?tstart=0

Place images to a specific spot in a template

I am trying to create an action that will drop images into a specific spot in another document and save it with a certain file name. After the first image is dropped in and saved, I want my next image to do the same and so on. I have all my images cropped to the correct ratio and being pulled from a folder on my desktop. I have my template open in Photoshop where I want my images from that folder to be dropped into. Is this possible?
Any help is greatly appreciated!!
Melissa

Melissa
What you want to do can be done but it is complex and actions have some limitations and can not use logic without using a script or two. File saving can be tricky for an action will always save the same file name or use the current document name saved either overwriting the file or saving it to some other particular folder. Action that populate a template can be created but it will always populate the same number of images because an action can not use logic to find out how many spots there are to populate. There are different ways to drop an image into the active document you can paste into an area or just past in the image in as a new layer. You can also Place images in as smart objects. Each method has some advantages and disadvantages. Layers can also be aligned with selections and layers can be transformed in size. Your best off creating rule for creating a template and have a plan as to how your going to populate these templates that follow your rules. To protect the template from alteration you may want to dupe the template close the original and work on the duped version. When you dupe the template you can give the dupe a name if you do not name it the new document will have the same name with copy appended.
Scripting is more powerful then Action but they are programs that are written in a scripting language. Photoshop supports three languages. VBS, Applescript and Javascript. Only Javascript is supported on both the MAC and PC platforms. Even using Javascript you may need to code the script to work on both platforms for I'm sure there are some differences in the OS and file system the may need special handling to work on both platform. From you description of you work-flow it is hard to tell exactly what you are doing. If you trying simple create a photo Collage. You may want to have a look at my free Package for Photoshop called "Photo Collage Toolkit" . I have been told this package works on a MAC but I created it and tested it on widows and got it To work with CS2, CS3, CS4 and CS5.
Photo Collage Toolkit UPDATED Sept 24, 2011 added a script to replace a Populated Layered Collage Smart Object Image with an other image with resizing.
Photoshop scripting is powerful and I believe this package demonstrates this.
The package includes four simple rules to follow when making Photo Collage Template PSD files so they will be compatible with my Photoshop scripts.
There are eight scripts in this package they provide the following functions:
TestCollageTemplate.jsx - Used to test a Photo Collage Template while you are making it with Photoshop.
CollageTemplateBuilder.jsx - Can build Templates compatible with this toolkit's scripts.
LayerToAlphaChan.jsx - Used to convert a Prototype Image Layer stack into a template document.
InteractivePopulateCollage.jsx - Used to interactively populate Any Photo Collage template. Offers most user control inserting pictures and text.
ReplaceCollageImage.jsx - use to replace a populated collage image Smart Object layer with an other image correctly resized and positioned.
PopulateCollageTemplate.jsx - Used to Automatically populate a Photo Collage template and leave the populated copy open in Photoshop.
BatchOneImageCollage.jsx - Used to Automatically Batch Populate Collage templates that only have one image inserted. The Collage or Image may be stamped with text.
BatchMultiImageCollage.jsx - Used to Automatically Batch Populate Any Photo Collage template with images in a source image folder. Easier to use than the interactive script. Saved collages can be tweaked.
Note: Rags Gardner www.rags-int-inc.com Photoshop Collage Template Builder script Copyright (c) 2006 builds layered Photo Collage Template psd files. Rags's has given me permission to include a modified version of his script in my package. The modification converts Rags's layered image template document into a flattened template compatible with Photoshop "Photo Collage Toolkit" package. There is also an option that will instead create a layered image stack like Rags's templates are these are also produced if you attempt to create a template with more then 53 images.
Photoshop only supports up to 53 Alpha channels therefore with its design the Photo Collage Toolkit can only support collages with 1 to 53 images. I do not feel this is a big limitation for if you put 53 3:2 aspect ratio images on a large 16" x 20" paper they would need to be less then 1.9" x 2.86" in size if you wanted a frame around each and less then .95" x 1.43" on a 8" x 10" year book page size.
While the maximum number of images in a collage is 53 you can actually create larger collages by populating a large number of images into several collages and then populate yet an other collage template with these populated collages. Each will be placed into the collage of collages as a single smart object layer. You may want to save the populates PSD file as Jpeg files first to cut down on the overhead of having large PSD file smart object layers in the collage of collages.
Documentation and Examples

Can you place an image in a div tag and then add type over top of it?

I told someone in class lastweek that I wanted to be able to
place type over an image. They said you can just add the image into
the div tag as a background image, which will allow you to then
type over it if you like. How is this done? I have tried and
failed. I have an image that is 200x590 going down the left side of
my page. I want to run type over it, and keep the image consistent
on every page, but change the header and type. I've seen this in
several sites. How do you do this with the div tag box model method
of building a page. Can I insert an image into the div and then run
type over it. What does the code look like?

Here's an example of using a css and a background image to a
table cell...
sample principle for a div
#div {styles go here{
http://tinyurl.com/yqeptp
You may also want to go through the beginner css tutorials at
the Adobe
site:
http://www.adobe.com/devnet/dreamweaver/css.html
(pay attention to the ones
by Adrian), beginner moving onto to creating full css
layouts.
Hope this helps :-)
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au
Forum Posting Guidelines:
http://www.adobe.com/support/forums/guidelines.html
>I told someone in class lastweek that I wanted to be able
to place type
>over an
> image. They said you can just add the image into the div
tag as a
> background
> image, which will allow you to then type over it if you
like. How is this
> done?
> I have tried and failed. I have an image that is 200x590
going down the
> left
> side of my page. I want to run type over it, and keep
the image consistent
> on
> every page, but change the header and type. I've seen
this in several
> sites.
> How do you do this with the div tag box model method of
building a page.
> Can I
> insert an image into the div and then run type over it.
What does the code
> look
> like?
>

How do I place an image in a div container for only 1 page?

I am designing a web site for my wife using DW. The basic
look of all the pages follow this format: <darhosta.com>. I
need to make about four pages that look different that the basic
look above. In essence I want to make the background white and have
a 'background image in the div container. Thanks to Nancy, who
frequents these forums, I was able to get rid of the background
image that surrounds the main div container with the CSS she
suggested. (Here's the page with Nancy's suggestion of the correct
CSS and where to insert it -Thanks Nancy-: <
http://darhosta.com/Pages/iltn.html>
The page is almost done but I want to have a background image
in the main div container. I've been trying to figure this out on
my own but haven't been able to. Can anyone help me? Thanks for the
help,
Lou
Note: Here the CSS that Nancy suggestion with my modification
included to get rid of the background. If anyone needs to see more
of the code please email me.
Thanks again,
<style type="text/css">
body {
background-image: none;

</style>
I now want to place an image in the div container. I've not
been able to figure out how to do this.

louhosta posted in macromedia.dreamweaver
> <
http://darhosta.com/Pages/iltn.html>
> The page is almost done but I want to have a background
image in
> the main div container. I've been trying to figure this
out on my
> own but haven't been able to. Can anyone help me? Thanks
for the
> help, Lou
> Note: Here the CSS that Nancy suggestion with my
modification
> included to get rid of the background. If anyone needs
to see
> more of the code please email me.
No need. All source is available from the link.
In ilth.html, change this:
<style type="text/css">
body {
background-image: none;

</style>
<link href="../css/global.css" rel="stylesheet"
type="text/css" />
<script src="../SpryAssets/SpryMenuBar.js"
type="text/javascript"></script>
<link href="../SpryAssets/SpryMenuBarHorizontal.css"
rel="stylesheet" type="text/css" />
to this:
<link href="../css/global.css" rel="stylesheet"
type="text/css" />
<script src="../SpryAssets/SpryMenuBar.js"
type="text/javascript"></script>
<link href="../SpryAssets/SpryMenuBarHorizontal.css"
rel="stylesheet" type="text/css" />
<style type="text/css">
body {
background-image: none;
background-color: #fff;
#container {
background-image: url(../images/global/bkPage.jpg);
</style>
By embedding the styles AFTER the linked stylesheets, the
rules
will overwrite property/value pairs in identical rules that
may already exist in the linked sheets - assuming no
!important.
Mark A. Boyd
Keep-On-Learnin' :)

How can i postition an image inside a div correctly?

I am learning CSS and I want to insert an image inside a div
used as a footer. I want the image to appear to the left of the div
with say 10px left margin and 5px top and bottom.
I also have a horizontal UL and a <p> inside the div
which are set to the centre. I want to keep their appearance as
they are - but add the image to the left without putting anything
else out of place if that makes sense.
Can someone show me how it is done?
http://www.tomkilbourn.com/newsite/test/footer.html
The image which I want to use is from validator.wc3.org -
<p>
<a href="
http://validator.w3.org/check?uri=referer"><img
src="
http://www.w3.org/Icons/valid-xhtml10"
alt="Valid XHTML 1.0 Transitional" height="31" width="88"
/></a>
</p>

~Billy~ wrote:
> Ive got it to work by adding -
>
> <span
style="position:absolute;top:27px;left:20px;">
> <img src="/newsite/images/valid-xhtml10.png"
/></span>
>
> before the closing body tag, but is there a way to do it
without using
> absolute positioning and span?
>
Id' do it by adding position relative to my footer div and
then I'd
create a class for the img and use absolute positioning for
it which if
nested within the footer div will be relative to that - like
so.....
in your css...
#footer {
border-top: 1px solid rgb(187, 187, 187);
padding: 0px 0px 10px;
background-color: rgb(51, 0, 0);
position: relative;
.w3c {
position: absolute;
top: 10px;
right: 20px;
and your html markup for your footer dive, something like....
<div id="footer">
<img src="/newsite/images/valid-xhtml10.png" alt="alt text
here"
class="w3c" />
<ul id="navlist">
<li><a href="#">Item one</a></li>
<li><a href="#">Item two</a></li>
<li><a href="#">Item three</a></li>
<li><a href="#">Item four</a></li>
<li class="last"><a href="#">Item
five</a></li>
</ul>
<p id="footerbottom">Copyright Tom Kilbourn 2007
www.tomkilbourn.com</p>
</div>
chin chin
Sinclair

Can I place an clipped eps image into a PSD file?

WINDOWS
CS2 Photoshop
I just started using CS2 - Can I place an eps image (saved with a clip path created in PSD) into a PSD file? I used to be able to do that in PSD 7.
When I place the eps file into PSD, I don't get the clip I get the entire image.
I made sure that I saved the file with the clip path.
Any thoughts? Thanks for the help.

Not that I'm aware of. The whole vector stuff has been changed for CS2, including completely revised file format loaders and later on the addition of smart objects of course, which of course is what you would do in CS3...
Mylenium

How can we place an image in already created inline graphic frame?

Hi,
AIM::
To place an image in the inline graphic frame.
OBSERVATION::
As i have analysed the snippet Runner,i came to know that it allows to load the placegun with the file(in my case image). but in order to place it,we need to click on the document..and then the image is placed at (0,0) of the page(I suppose Indesign does it automatically).
what is needed,is to place image in already created inline graphic frame. i have created a inline graphic frame at some position in the story,but now i required to place image in this created frame.

I have the same problem. Can you give me a short code sample for that.
I have an image and want to place it in the currently selected frame...

Can I place a (Rectangle Tool) container filled with an image in an (Accordion) widget and make it clickable?

Is it possible to use the Rectangle Tool to create a container, fill the container with a graphic image, place the container and image in an Accordion widget space and make the container clickable to open and close the Accordion?
I've done this but the container isn't clickable, only the other areas of the Accordion window are. Can this be done?

You can use the image as fill for label of accordion which will open the container on click.
If this does not answer your question then please provide me an example where I can see what exactly you are trying to achieve.
Thanks,
Sanjit

Can I Place an Image in a Table Cell?

I have a table in ID CS3. Can I place an image in one, or more than one, table cell? I see a place to manage fills, but don't see an option for images.

I am working on a calendar project and variously want to: (1) put an individual image in a box, (2) put a continuous image behind more than one box like two dates side by side, (3) put a continuous image in multiple boxes that although they constitute a multiple of boxes, might not be rectangular, (4) put text over any or all of the preceeding.
I can places gridlines on the page, create text and image boxes for for each date, and the join the images boxes as necessary. Then for the box lines I could use an empty table or I could draw them individually and group them. This would get me what I want. I just thought this might be done easier with a table.

How can one place a single image on a spread? CS3-MAC

Hi all,
i How can one place a single image on a spread? CS3-MAC
A very straight forward question I think. I just never did it before. Anyone knows of a fast technique of doing this? I have to make 70+ images this way. Could it be scripted?
thanx in advance
Michael

You'll need to be more specific. Placing a single image on one spread is drop-dead simple. File > Place, choose file, click (or click-and-drag) to place, scale and position as desired. You can ask about scripting in the
scripting forum.
You might not need to script this to get efficient use of time. Make a picture frame on the master spread and then insert 140 pages (70 2-page spreads) based on that master. File > Place, and select all 70 files. (They need to be in one folder. Click on the top file, scroll down, lick on the bottom file.) Zoom out and click once on each spread to place each image. Should work faster that writing, testing, debugging, and running a script.

Can't Place image in AP div

Similar Messages

Maybe you are looking for