Can't play more then 4 stream at a time

We are doing the project called player.
In this we have tried to play actual call and its related calls ( in and out voice separately)
But we can play 4 stream at a time, but if it reaches more then 4 its throwing below error.
In this we are using JMF and tomcat server.
Error:
=====
Unable to handle format: LINEAR, 8000.0 Hz, 16-bit, Mono, LittleEndian, Signed, 16000.0 frame rate, FrameSize=16 bits
Failed to prefetch: com.sun.media.PlaybackEngine@1a998c7
Unable to handle format: LINEAR, 8000.0 Hz, 16-bit, Mono, LittleEndian, Signed, 16000.0 frame rate, FrameSize=16 bits
Failed to prefetch: com.sun.media.PlaybackEngine@484c6b
Error: Unable to prefetch com.sun.media.PlaybackEngine@484c6b
JFM Error event com.sun.media.content.unknown.Handler@913c56
Error: Unable to prefetch com.sun.media.content.unknown.Handler@913c56
JFM Error event com.sun.media.content.unknown.Handler@5db9eb
Environment:
==========
OS => GNU/Linux
kernal name => linux
kernal release => 2.6.31-16-386
kernal version => #53-Ubuntu SMP Tue Dec 8 06:39:34 UTC 2009
Jdk version => jdk1.5.0_10
Jre version => jre1.6.0_18
JMF version => JMF-2.1.1e
tomcat server => tomact5.5
We don't know why this problem is coming. please give some solution.

Thanks Sluggospud, but that didn't work for MY nano.
I tried both solutions, and each time only a single entry plays, afterwhich the system returns to the root directory with "music" selected.
I did notice something wierd. If I choose any album except podcast albums, I can click the play button and the album starts to play. If I click on the Onion Radio news "album", nothing happens.
The only way I can get any onion podcast to play is to enter the album (or artist or playlist) and click play on a single entry.
I had been able to play podcast playlists before the most recent iPod updater. I don't know if I need to do some secret reset to get podcasts to play properly.
grrrrrrrr

Similar Messages

IPad - with movie clips - how can I play more than one at a time?

iPad2. I post short movie clips via iTunes to the Photo catagory. I can play each of these clips by selecting the clip and pressing the start arrow, only the selected clip will play. How can I select a group of movie clips and have them play with only one selection. Like a "slide show" but for movie clips???

More than one contacts at a time

HT1222 I just updated iTunes to the latest version and now I can't play more than have of my songs. Says it can find it and then leasds me to locate it. I don't know where to look. Help!!!

I just updated iTunes to the latest version and now I can't play more than half of my songs. When I click on a song it comes back and states that it can't find it and prompts me to try and locate it. I don't know where to look. Help!!!!

Hi ldhong,
There are a few ideas in this article on how and where to look for missing iTunes media:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Hope this helps!
- Ari

How can I restrict more then one user to access the table?

Hi !
I have a problem and two solutions and I am a bit confused as to
which one is the best one and/or can there be any better way of
handling the problem ?
Problem : I have to update a key field of a table when I update
it in the form 5.0 screen. I am basically doing a maintenance of
a table and if a certain field is updated then the change has to
be reflected in two more tables. But the issue is that the field
is a part of the key in those two tables. So all I can think of
is that I need to insert new set or rows for that new value of
the field and delete the old set of records for old values of
the field.
There are two ways of doing it;
1.One option can be to explicitely define two cursors separately
and fetch the values in them one by one and then insert the new
records and then delete the old records in both the tables. This
I feel will be a cumbersome process both in terms of processing
time and the coding.
2.Second option I was thinking can be to create two flat tables
(without keys) and insert the values in them and update the
changed field there and then insert the rows in the respective
tables. Delete the old records in the main tables and delets the
records in these flat tables. This is a bit more faster and
easier to predict and code. This seems to be a better option for
me.
Any comments on these ?
In both the cases I was thinking of making some provision so
that more then one person can't update the table simultaneously.
Since if there are more then one persons doing the processing
then some inconsistency might creep into the whole process.
This is easier to do in the second process as if I check the
data in the flat tables and if there is some data then I can
presume that some one is doing the processing and I can ask the
other person to hold for a while. But in this case how can I
stop more then two people to simultaneously check for the empty
table and start inserting the record ?
I was just thinking of having a sepatare table having only one
field and this will be a key field and as the process begins the
process will insert a fix value say 'Y' in the key field and at
the end of the process the record will be deleted and this way
we can restrict the user to access the process more then one at
a time..? Since you can't have same value of the key in a table
more then once.
Any better way of handling it will be deeply appreciated.
How about locking the table at the begining and releasing the
lock at the end ? Will there be any issue in that? since I am
inserting and deleting the rows in the same transaction.
Comments welcome,
Shobhit
null

How about performing the update IN the database using a stored
procedure?
By using non-database fields on your form to get the
information, you can then call the procedure in the database to
perform the updates. If an error occurs in the procedure you
rollback, if necessary, and send a message or status back to the
form. If it succeeds you might wish to commit and then re-
execute the form's query -- using either the original key values
or the new key values...
null

Can I use more then one apple ID on my computer/osx app store

Hi,
I use my MBP/iMac/ipad/iphone for both business and home. Right now everything is setup to my home apple id (and I have made quite a few purchases with that). With the release of the osx app store and FCPX, my company wants to buy these for my computers. But they want to do this on their apple id. Can I run more then one id on a mac? How can I make this work as I know they will want me to start getting more apps as they are released.

You can have apps from multiple Apple IDs on one Mac. The issue will be that to update Mac apps bought with A ID #1 will require signing into A ID #1 in the MAS. And later when apps bought with A ID #2 need an update you will need to sign into A ID #2 in the MAS to update them. If you can keep that straight and can abide that requirement, there should be no issues.
The same will be true to update iOS apps, but using iTunes.

HT1296 How can i get my contacts to show on itunes on my laptop? Or at least delete more then one at a time on my iphone 4s???

How can i delete more then one contact at a time on my iphone 4s or bring my contacts up on itunes on my laptop?? please help

No.
Iphone will sync with one and only one computer a a time. Syncing to another will erase the current content from the iphone and replace with content from the new computer.

I can not establish more then 1 call at the same time

Hi,
I have SPA9000 with four active accounts. I can not establish more then 1 call at the same time. Accounts are all in registered state. The field in SIP tab, Default Group Line:, is by default: 1,2,3,4 which means if line 1 is busy try the next one in the order ( in this case number 2). But this is not happening. It always tries to dial out with the first line (account). There is no problem with the provider and I don't want to specify groups of userID's and to assign them special line for dialing out.( by the way in this way it is possible to establish more parallel calls, but then each user will always have to dial thru specific line only). Please help me to find out if the SPA is faulty or give me some workaround, so that when I try to make a call , if one line is busy to dial out thru the next available.
P.S. I suspect that SPA9000 does not notice when the line is busy or not. Maybe there is some issue with the Control Timer Values (sec) on Regional tab.
Thanks,

no it can only be one person at a time

Can you have more then one iphone control the apple tv at the same time?

Can you have more then one iphone4 as a remote for one apple tv at the same time?

iCloud, iTunes & Apps Stores can be assigned different AppleID's from the Settings app. I have my phone and my wife's set up this way for the very reasons you are describing. Works well.

Can I connect more then one cDAQ-9188 in the same network?

Hi, I have one question for you.
Can I connect more then one cDAQ-9188 to moxa EDS-G205-T for querying simultaneously in the same PC?
thanks in advance for any response.

You will need a network switch and make sure they are different IP Addresses, but same subnet.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Can we assign more then one abap system to one bpc server?

Hi my question is short an d simple.
can we assign more then one abap system to one bpc server?
Regards Stefan

Stefan,
My understanding is that this is not possible. However, I believe you can have multiple BPC .NET servers and point them to different dialog instances of the same ABAP system. You would then put a load balancer in front of the .NET servers and requests will be distributed across the ABAP dialog instances.
Ethan

Can I have more then one MVIEW site connected to single master site?

Hi,
I need one help from your end.
Currently I am working on Basic Replication.For that I am using Read only Materialized views.first i tried with one master site & one Materialized view site its working fine,Can I have more then one MVIEW site connected to single master site referring to same database ? if so how to achive this one..

Actually one of my senior told me that you need to change number of OPEN_LINKS value like that so for that reason I asked this question.
Still that problem not solved..
I will explain what are all the things I did ok.
IN MASTER SITE:
I am creating read only MVIEW's.
first i created one user repadmin and have given
1>execute any procedure
2>dbms_repcat_admin.grant_admin_any_repgroup
3>dbms_repcat_admin.grant_admin_any_schema
4>select any dictionary
and all other grants to repadmin user
then I changed global_name = 'zxincmp' on Master site.
Then I created mview log for each table (for 85 tables) & then I created mview's for that table on Master site itself. later I took a dump of these 85 mview's . then I transfered this dump to one of my mview site.
IN MVIEW site:
I created one user zxdbp_55 and all the above rights are given to this user & i created one public dblink
"zxincmp" using "TO_CMP"(master site).Then I imported that dump which i took from master site.
then i created one private link zxincmp in one of my mview site.then i used DBMS_REFRESH.MAKE('')
to refresh all my tables & to set the interval..
after that i created index on the mviews..
this will works out fine for single master & single mvirew site.but I tried with the same procedure to prepare one more mview site,everything is fine but main problem is second mview site is not getting refreshed automatically,i need to do refresh manually from enterprise manager.. then it will get refreshed.
how to overcome this problem? I am using same db name ,dblink,refresh group for both the mview site will it affects anywhere?
Thanks & Regards,
Hanumanth.

Can I have more then 1 loader or how can I track load of instances?

Hello, does anybody know if I can have more than one loader?
Ive made a thumbnailviewer with children, but when I track
the progressevent, the loader sum it all up to 1 load.
I want a loader for each picture, how could this be done?
So can I have more then one loader progressevent?
any help much appreciated.!
ps. the "i" in last simpleloader function is there for test,
and not because I know what to do!

Oops!
I did not look at the code close enough.
First of all, a correct way to add a loaded bitmap image is:
addChild(Loader.content);
Second, content is available once it starts loading
(Event.INIT). So because the content is not available right away -
there is no parent - if you know what I mean.
I tried my best to write something that may work (see
attached code). I did not test it though and even did not test the
syntax - I am on a computer that doesn't have my development tools.
The logic is:
Make container --> make loader --> give them the same
name for match them later --> attach INIT listener to
contentLoderInfo --> inside the listener: get the name of the
loader -- > add loader content to display list --> add
textfield --> attach progress listener.
Inside progress listener the logic is the same - to find the
name an update the appropriate textfield.
Frankly, this solution doesn't look elegant to me. I would
rather make a class that extends Loader and handles all the logic.
Or, perhaps, someone else can show a better way without classes.
Let me know if it works.
Second thought: Obviously this solution is a bit stupid -
when INIT is invoked - image is available and adding the progress
is useless.
I am too tired to think about different way to accommodate
your need for the progress display. But, maybe, if you follow the
logic you can make appropriate adjustments keeping in mind the
sequence of the events and availability of the objects.

HT1107 I have registered 2 domain names . can I have more then one domain name on mobile me or icloud?

I have registered 2 domain names . can I have more then one domain name on mobile me or icloud?

MobileMe ends here at the end of the month so you will need to look into hosting your website/websites with another webhosting service.
I personally use IX Webhosting for a couple of reasons:
Fast reliable personal tech support by phone, instant chat, & email
They allow unlimited domains "www.yoursite.com", unlimited email accounts, unlimited bandwidth
And, price they are very reasonable plans start @ $3.95 USD a month
http://jeffnitschke.com/IXWebHosting.html

Can I have more then one icloud E-Mail Account?

Can I have more then one icloud E-Mail Account?

Hi Pathfinder93950,
Welcome to the Support Communities!
You can only have one iCloud account per Apple ID. However, you can have up to 3 aliases that point to that iCloud account. Here is some additional information:
iCloud: Set up an @icloud.com email address
http://support.apple.com/kb/ph2620
After you set up your @icloud.com email address, you can use it to sign in to iCloud. You can also sign in using the Apple ID you used to create your iCloud account.
iCloud: About email aliases
http://support.apple.com/kb/ht4897
iCloud: Create or change email aliases
http://support.apple.com/kb/ph2622
You can have up to three active email aliases, and you can delete or deactivate (turn off) an email alias at any time. You might want to deactivate an alias if, for example, you use an alias to make a purchase. After you receive the item, you can turn off the alias to avoid follow-up advertisements, then turn it on again when you make another purchase.
Deleting an alias is permanent, so if you think you might want to use the alias again, you should simply turn it off. When an alias is turned off, all email sent to that alias is returned to the sender.
iCloud: Using your @icloud.com email address
http://support.apple.com/kb/ht5441
Cheers,
- Judy

Can you have more then one Itunes account on your computer?

Can you have more then one Itunes account on your computer?

Yes. (One of my systems has music purchased from two different iTunes accounts in its iTunes library.)

Can't play more then 4 stream at a time

Similar Messages

Maybe you are looking for