Can't play music and be on old network at the same time?

I just want to use this device to play music and connect to my original wireless network. I assume since I'm not using an Airport Extreme to connect to the internet then I can't get the Airport Express to connect either. I can't listen to music and be online at the same time the way it is currently configured. Is there another way to set this up so I can connect to my airport on itunes and play music while being on my other wireless network?

Try Doing a hard Reset your Express and go through the setup procedure again.
This time making sure your joining your existing network.
Powerbook G4, MacBook Pro, Mac G5, Mac G4, Mac Mini Mac OS X (10.4.8)

Similar Messages

WRT110 Can't connect MAC and PC to wireless network at the same time.

I installed a WRT110 router on my son-in-law's MAC sometime back and at the time configured it to have the MAC connected via Ethernet. My PC laptop worked fine with it in the wireless mode. Recently we changed the MAC to wireless newtworking and removed the Ehthernet connection. Now if the MAC connects to the wireless network first and then I attempt to connect with my PC laptop the PC cannot find the network and the MAC loses connection. If I shut my PC down the MAC will not find the network until it is put to sleep and reawakened. If the MAC is put to sleep my PC wil immediately find the network. If I first connect my PC and then awaken the MAC both work fine. I've checked all of the router's setup settings and they seem to be OK. I am not MAC savvy and my son-in-law is a neophyte at computers so we are really helpless when something doesn't work. Help will be appreciated.

I tried this setup change after reading another similar post. It didn't help. One thing I had wrong in the first post is that neither computer will connect to the wireless net after we experience the wireless failures until both are turned off, at least that is what happened after making the suggested changes. Is this a WRT110 issue? Seems there are quite a few posts similar to mine.
Bo2

How to play stereo mix music and sing in my mic at the same time?

Hi guys, need help regarding Realtek HD audio driver
I want to play stereo mix music and sing in my mic at the same time.... not for recording purposes but in chatroom let's say.
I'm using XP...Toshiba Satellite S4747 laptop
In the Realtek software under " Realtek HD audio input" I have mic and stereo mix both.... but I can only select one at a time.....
Any solutions plzzz thxxxx
On a different note.... a friend of mine whose using one non-Toshiba laptop with win XP has an older version of the Realtek audio driver and can select both mic and stereo mix at the same time... I downloaded that version into my laptop but I still can only select one at a time....

Check the audio settings in Windows and dont forget in Realtek HD audio manager. You can find it in control panel.
I think your microphone is set to mute so check this.

Can i play different songs to different airplay speakers at the same time ?

Can i play different songs to different airplay speakers at the same time ?
I know you can select the different speakers to play the music to, but wondered if you can also push different music to different speakers at the same time ?
If not is there a way around this other than going for something like Sonos ?

I found another solution in this thread http://forums.macrumors.com/showthread.php?t=695360
Again you need the rogueamoeba guys.

Can i share music and photos between two users on the same machine?

How can I share my music and photos between two users on the same machine?

Thank you Joe - I tried this but it's only showing a teensy amount of music - the stuff on the second users account as opposed to the giagntic library on the 'main' account. I actually went to a Genius Bar and they said that apple doesn't really want you to share music between accounts - parents don't want to hear their kids music etc. Which seemed strange, but it might be the case sadly Thanks anyway!

HT4437 Can't get iTunes and monitor mirroring to work at the same time.

When I turn on my airplay on itunes it turns off the airplay from my monitor. I don't know how I've done it before but I sometimes can't play itunes and have it mirror my screen at the same time so I can use the visualizer. Whenever I turn one on, the other shuts off. I've done it before. Is there a specific sequence you need to run itunes and have the mirroring work too?
Ak

You might try a simple headphone splitter like this:
http://www.amazon.com/Belkin-F8V234-WHT-APL-Headphone-Splitter/dp/B0000UV2AW

Can't connect to Internet and 192.168.1 network at the same time

I have been having an issue with my MacBook's networking for the past 4 months. Here are the specifics:
*My MacBook is connected to the Internet via a linux router, with an address in the 192.168.1.x address space. DNS server is an openDns server, 208.67.222.222
*My MacBook is assigned an IP Address manually in the 192.168.1.x namespace
*I have a printer manually assigned an address in the 192.168.1.x namespace
Problem:
* I can only connect to my printer if I leave my DNS server entry blank under my Airport TCP/IP configuration
* I can only connect to the Internet when my DNS server entry to set to the openDNS server entry.
Question:
Is there any way I can connect to both my local network printer and the Internet at the same time? I have set up two locations that I can switch between, but I would prefer to be able to access both networks at once.

I tried turning AppleTalk on, but no luck.
It seems that the problem is related to basic TCP/IP connectivity. For example, when my DNS server is set to blank, I get a fine response from the command "ping 192.168.1.253". However, when my DNS is set to one of the openDNS servers, I get this error:
PING 192.168.1.253 (192.168.1.253): 56 data bytes
ping: sendto: No route to host
ping: sendto: Host is down

Can I extend both a 2.4Ghz and a 5Ghz wireless network at the same time with a second Timecapsule / Extreme ?

Can I extend both a 2.4Ghz and a 5Ghz wireless network coming from a Timecapsule with a second Timecapsule / Extreme at the same time?

I am currently extending my 5Ghz network via an Express without any problems, but the Express can only extend either / or. I just want full coverage for both networks in the whole house.
If you can extend 5 GHz now with an AirPort Express and get satisfactory results, then the AirPort Extreme will work to extend both the 2.4 GHz and 5 GHz bands in the same location.
However, your computer is going to connect to the band with the strongest signal, so it may....or may not....connect to 5 GHz given a choice of two signals.

Can't a BufferedReader and a BufferedWriter be open at the same time?

To the experienced:
I am writing a class to selectively extract data from an Excel file, and write out to a plain text file. I am using JDeveloper 11.1.1.3.
It works fine and writes out the output file as expected when reading data from the spreadsheet and directly writing to the output file.
However, I need to convert the data in one of the columns based on a conversion table. The conversion table is a plain text file that has two columns separated by a space. I read in the conversion table using a BufferedReader and put it in a HashMap for use. However, once the Buffered Reader and the HashMap are introduced, the BufferedWriter does not work any more.
The way the class works is that, the main() method (not shown here) reads data from the Excel sheet into a List, and then calls the method showExcelData() (as shown below) to write out data from the List to a plain text file.
When the green color code was not added, the output file was written to the disk fine. A sample line from the output file is:
JOHN:DOE:11223344:12345:20110824By adding the green code, I expect it to output the line as:
JOHN:DOE:11223344:STUDENT:20110824The problem is, after the green code is added, the output file the program writes to the disk is zero size.
I added the System.out.println() lines for troubleshooting. These lines show that the BufferedWriter out is not null, and the conversion is actually taking place. But out.write() simply does not work. Commenting out the green code, the program is working again - of course, without date conversion for that column.
There must be something wrong but I can not see where it is wrong.
Your help is very much appreciated!
Newman
<pre>
private static void showExcelData(List sheetData, String outputFilename) throws IOException {
BufferedWriter out = new BufferedWriter(new FileWriter(outputFilename));
System.out.println("Is out null? " + (out == null));
BufferedReader in = null;
for (int i = 3; i < sheetData.size(); i++) {
List list = (List)sheetData.get(i);
for (int j = 0; j < list.size(); j++) {
HSSFCell cell = (HSSFCell)list.get(j);
if (j == 5 || j == 6 || j == 7 || j == 11) {

// The column with index 11 is the column of data that needs conversion:
if (j == 11) {
String convertionFilename = "ConversionTable.txt";
Map<String, String> liveMap =
new HashMap<String, String>();
try {
in = new BufferedReader(new FileReader(convertionFilename));
String line = null;
while ((line = in.readLine()) != null) {
String[] keyValue = line.split(" ");
liveMap.put(keyValue[0], keyValue[1]);
} catch (IOException e) {
String message = e.getMessage();
String titleCode =
cell.getRichStringCellValue().toString();
String role = liveMap.get(titleCode).toUpperCase();
out.write(role);
System.out.println(titleCode + " " + role);
} else {
out.write(cell.getRichStringCellValue().toString().toUpperCase());
System.out.println(cell.getRichStringCellValue().toString().toUpperCase());
}
if (j < list.size() - 1 && j != 11) {
out.write(":");
} else if (j == 26) {
if (cell.getCellType() == HSSFCell.CELL_TYPE_NUMERIC) {
if (DateUtil.isCellDateFormatted(cell)) {
Calendar cellDate = Calendar.getInstance();
cellDate.setTimeInMillis(cell.getDateCellValue().getTime());
String year = "" + cellDate.get(Calendar.YEAR);
String month =
padding(cellDate.get(Calendar.MONTH) + 1);
String day =
padding(cellDate.get(Calendar.DAY_OF_MONTH));
String expDate = year + month + day;
out.write(":" + expDate);
out.write(System.getProperty("line.separator"));
if (in != null) in.close();
if (out != null) out.close();
</pre>

Hi, All,
This posting is at the bottom of the stack. Quite a few more postings were added on top of this and solved, and now I reach back to this one.
The main problems are:
1. Close the I/O buffer after finishing using it. Otherwise the data in the buffer do not get flushed to the file on the disk. I think that is the cause of the problem of getting zero sized output file.
2. Do not count on Excel to stop at a blank cell by using Ctrl-down / Ctrl-up. The file I am processing is produced by some reporting program which, I think, instead of skipping the cell, puts a zero-sized string in it. Obviously, Excel does not stop at such cells. I had checked the columns using the Ctrl-down/Ctrl-up key and through that column did not have blank cells. Sharp-eyed gimbal2 spotted the problem, and led me to re-inspect the column by using up/down arrow keys instead, and found the blank cells. Such empty strings are used in my code as key in searching the map (String role = liveMap.get(titleCode).toUpperCase();) and caused the problem.
And the lesson is, when doing some quick and dirty tests, do not get too quick and too dirty, which can end up slower rather than faster.
Many thank to all of you for giving me the helping hand!
Newman

Trouble playing music on more than one "airport" at the sae time

Now that I havew added a second airport base..I cannot play music in more than one room at the same time...when I try and choose multiple speakers...it states that the particular airport cannot play simultaneously...i have an HP Pavillion, a Mac Book on a Netgear network router....Is there a set up procedure to allow playing music simultaneosly?
Sorry for the run on question..
also is there Apple live telephone support? i cannot seem to find it
Thanks Mike

Are all the Airport Express units using firmware 6.3?
iFelix

Can i play music and use mirroring function at same time from ipad2 to apple tv

can i play music and use mirroring function at same time from ipad2 to apple tv

Yes, any audio during the "mirroring" funtion will forward to the appletv. This includes all system audio, games, apps, ect. If you slide the mute botton the side of your ipad to mute then you can block app audio and just get Music audio or Pandora if you are using pandora.

Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

As long as the profiles are different (ex. HID vs AD2P) you will not have any issues. But say if you try to use 2 keyboards at once, it won't work. Or 2 headsets at once. Your scenario seems fine.

Can you use apple tv to play a movie on your tv (say for kids to watch) and use your mac book at the same time to browse the internet ???

Using a mac book pro !
Can you use apple tv to play a movie on your tv (say for kids to watch) and use your mac book at the same time to browse the internet ???

Good question bigboggerchoot. I also would like to know the answer to this.

I have an Iphone 6 plus. Can the bluetooth connect to the cars speaker system and a Garmin HUD unit at the same time?

I have an Iphone 6 plus. Can the bluetooth connect to the cars speaker system and a Garmin HUD unit at the same time?

Hi,
Normally yes, Bluetooth can connect to multiple devices at the same time, so yes.
The only thing is that you'll be able to send sound/music to only one at a time, but I understand the Garmin HUD doesn't play sounds.
cheers

I dont get sound for videos, games and music but ringtone still works. When i press volume buttons on side of phone i only get the picture of the nell and no little dots underneath. This is on my iphone 4s and ipad. It happened at the same time.

I dont get sound for videos, games and music but ringtone still works. When i press volume buttons on side of phone i only get the picture of the nell and no little dots underneath. This is on my iphone 4s and ipad. It happened at the same time.

Recurring theme with the 4s losing alerts except for the phone ringing. Most complaints seem to center on the 7.1 upgrade. The fix is dodgy, putting in a charger, playing a you tube video then pulling out the charger and wiggling it until you get the sound back. When you get the sound back, the volume buttons start to work again. Alternate solutions involve cleaning the docking port with a toothbrush, running a pick over the electrodes etc.

Can't play music and be on old network at the same time?

Similar Messages

Maybe you are looking for