Can't press apply button when using disk utility to make a new partition

Hey guys,
It might sound silly but when I use disk utility to divide my hd without deleting my files the apply button stays blank, it doesn't allow me to press apply, can anyone help me with this?
Thanks in advance

Hi Tom,
Of course, that makes perfect sense! When I made my last disk image backup, my PowerBook had a serious, undiagnosed problem and I had booted from the startup disk to have a current backup of everything before I sent it off for repair.
Thanks for your help.
Rick

Similar Messages

Can you use disk utility to make a backup of Time Capsule?

I have a client who would like to keep a lot of important files on his time capsule for network usage, however I would like him to back up the time capsule. Can you use disk utility to make a copy of the data on the Time Capsule?
Lastly is there a way you can remotely access the files on the time capsule? (he would like to remotely access files on the time capsule).
thank you.
you should be able to use Back to my Mac to access the time capsule correct?
Message was edited by: RonPaul08

no one willing to attempt this for me?

I got 3.95GB available on my flash drive and need 4GB to reinstall lion osx how can i create space on usb using Disk Utility ??!

I got 3.95GB available on my flash drive and need 4GB to reinstall lion osx how can i create space on usb using Disk Utility ??!

What is the capacity of the flash drive?
You might also be able to reinstall Lion without a flash drive, by booting up the computer holding the Command + R keys, and choosing Reinstall OS X.

I recently downloaded is x mountain lion and while it finished it erased all my data, some of which I need. When using disk utility I found my old data but it says corrupted. I can't repair and while restoring the error code 32 Broken Pipe appears. Help?

My data I need is on my computer but it needs to be repaired but can't and when I try to restore it/back it up it ends abruptly with error code 32 broken pipe.
It was damaged while installing os x mountain lion and I found my data on disk repair (utility)

Sounds like your hard drive is badly corrupted, likely due to problems that were already there when you started trying to install Mountain Lion. The problem is, if you don't have any backups already, you may not be able to recover all your data from this state. Do you have backups of that data already?
If not, I assume when you say that "it needs to be repaired but can't," you mean that Disk Utility tells you there is a problem with the disk, but that it is unable to repair it? If so, you can try repairing the drive using DiskWarrior, which can repair problems that Disk Utility cannot. That may give you access to your data again, but may not.
Also, it's important to understand that if your data is not backed up, everything you do with the computer runs the risk of overwriting or corrupting that data. You may want to go straight to trying to recover your data. See Recovering deleted files.
Regarding the error code, if you're trying to back up the drive using Disk Utility's Restore tab, note that that is often not successful when the drive you're trying to back up is corrupt.
Once the situation is resolved - either because you have backups, are able to recover your data files or are forced to accept that they are gone permanently - you will need to erase the hard drive and reinstall the system and all your apps from scratch.

When using disk utility to copy one drive to another is it common for the screen to go black

I have a G5 and the main HD is making a little noise. I installed a new HD and was using disk utilities to copy the old to the new. The message came up that it would take 5 hours to copy. The screen went black ... is this common? How do I know it's doing it's thing?

I always set the Energy Saver settings to "never" whenever I do things like volume cloning, software (especially OS) downloading and installing, or using Disk Utility for most anything.

Disk Utility won't add new partition

I have an external 250GB hard drive connected via USB to my Mac Mini (Early 2009) computer. The drive has a GUID partition table that was created using Windows Vista SP 1. The first partition on the disk is a 128MB Microsoft Reserved partition. The second partition is a 120GB NTFS partition. When I try to use Disk Utility to partition the remaining 112GB of space as a Mac OS Extended Journaled partition I keep getting an error message stating "MediaKit reports no such partition". How do I get around this bug in Apple's Disk Utility application?

techguy378,
As they always do, Microsoft has undoubtedly created "their own" proprietary implementation of the GUID partition table. The effect, in this particular case, is that Disk Utility cannot see that unused space. That doesn't mean this is a Disk Utility "bug."
If one were to do the same thing with Disk Utility- create 2 partitions on a drive that do not fill the drive- that empty space would be included in the partition map. Simple. In your case, however, it appears that Vista has just excluded that empty space from the map entirely. Neat trick, huh?
I think your only solution will be to add a partition in Vista, if that is possible without destroying the current volumes. You can then reformat the new partition in Disk Utility.
Scott

Disk utility crash whilst creating new partition - OSX 10.8.2

Hi all,
On my MBA I tried to partition the hard disk - creating two equally sized ones from the existing 112GB.
Only 40GB are used at the moment. First Disk Utility only let me create a new one with 50 GB, but I went ahead anyway (constantly complaining that the target disk is too small....)
Disk Utility crashed in the middle of resizing and now I have a big mess - looks like it worked in resizing the primary but I can't access the 'new' half.
This is the diskutil list output:
diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *121.3 GB disk0
1: EFI 209.7 MB disk0s1
2: Apple_CoreStorage 120.5 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Macintosh HD *52.4 GB disk1
Any idea how to access the missing part?
It's OS X 10.8.2 on MBA 5,1
Thanks a lot,
getwerc

Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.sidebarlists.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

How to back up when using Disk Utility off the DVD

Hello. i ran into some problems installing snow leopard and can't get back into 10.5. i can only boot into my windows partition. how would i go about creating a back up from Disk Utility being run off of the installation dvd?

If your OS X partition cannot be accessed then you may not be able to back it up. If you have another computer with FireWire then you can try booting the computer into Target Disk Mode. If you can access the drive from the other computer, then you can try recovering your files. Otherwise see the following:
Basics of File Recovery
Files in Trash
If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location. OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
If you empty the Trash the files are gone. If a program does an immediate delete rather than moving files to the Trash, then the files are gone. Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When files are deleted only the directory entries, not the files themselves, is modified. The space occupied by the files has been returned to the system as available for storage, but the files are still on the drive. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten with recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

Partitioning error when using Disk Utility

To better facilitate backups, I have decided to create a dedicated partition on my external hard drive for Time Machine to use. This is a 300GB disk (don't laugh) with 116 GB of music on it (mostly in the iTunes library) plus some other original AIFF files. Disk Utility reports that there is 163 GB of free space on it. When I try to create a partition of about 100GB (or even 75) it gives me the "Partition failed with the error: No space left on device". I get this even if I just try to resize the original partition. I tried rebuilding the directory with Disk Warrior and it didn't help. If I give it a small enough partition to try- say 25 GB or so- it will work. Much above that though, and it always gives me the "No space" error.
I should mention that this disc, without any partition, was used for a while as the Time Machine backup disc. I don't remember why we stopped backing up, but I think it had something to do with running out of space.
I told Time Machine to use the (unpartitioned) disc once again as the backup disc, and it started backing up to it. I stopped it before it got too far.
Could there be files on there that I can't see that are taking up space? I did the "Erase free space" thing in Disk Utility but that didn't seem to clear out any more space. Like I said, it reports that there is 163 GB of available space.
I need to be able to Time Machine the startup drive so that I can install Snow Leopard and also re-do the Boot Camp thing so I can re-install Windows XP, as my wife will have a need to use the dark side for work starting next week. I'm trying not to spend any money, so getting another drive isn't really an option and neither is getting another partitioning utility, as they seem to run about $40-$50 dollars or so, and I can't be sure that they will work either.
Any ideas on this?
Thanks-
Val

Most likely issue is fragmentation. Clone it to another and then restore it after erasing. That will defrag the disk. BTW, TM usually needs about three or four times the size of what it's backing up. I suggest popping for another ext HD; they're relatively cheap: <$100 USD. for 500-1,000 GB.

Warning signs when using disk utility for my power mac g5

I have a dual 2GHz PowerPC G5. I just upgraded to the latest Leopard & installed FCP2. I noticed when I use Repair Disk Permissions, there are so many warning signs & I'm not sure what to make of it. I do notice that my computer freezes a lot, can someone help interpret these warning signs for me? And, how do I fix it? Here are some samples of those warning signs during repair disk permissions:
Warning: SUID file "sbin/mount-nfs' has been modified and will not be repaired.
Warning: SUID file "sbin/unmount" has been modified and will not be repaired.
Warning: SUID file "sbin/ping' has been modified and will not be repaired
Warning: SUID file "sbin/ping6" has been modified and will not be repaired
Warning: SUID file "sbin/route" has been modified and will not be repaired
The list goes on and on, please help.
many thanks in advance.

The catalog is the index for all the files on disk. It is useless without the related disk files so cloning just the catalog isn't really an option. You would need to clone the entire drive (SuperDuper!, Carbon Copy Cloner and even Disk Utility will do this).
Disk Warrior is a utility to clean up the catalog, make it into an order that should speed up file operations. It has potential to loose files because of the nature of it's job, but it is pretty reliable in my opinion. The catalog is like a telephone directory for files
The repairing of permissions involves the system keeping receipts of all the things that are installed & updated (with the appropriate permission values) and then the repair permissions utility resets the files to what the receipts say. The recieots are kept in the /Library/Receipts folder. You haven't deleted anything from there have you? if you have you would need to replace them with copies from a similar system, not an easy task.
I believe the items contained in /sbin/ are system binaries that come from the BSD package when installing Mac OSX. I would consider doing software updates then try repairing the permissions again.

Can you use disk utility to resize the windows partition in bootcamp

I've successful done everything for bootcamp, but I think I made the partition size for windows too small. I read you can use the disc utility on mac to resize it, is that true and does it work fine? I haven't installed anything on the windows part yet so it's not like I need to worry about losing anything

No. If you do then neither your boot loader nor Boot Camp Assistant will be usable. You should use a tool like Paragon Camptune X 10 to make resizing easy.
Boot Camp Assistant would require you to first remove the partition then create a new one.

Using Disk Utility to make a bootable clone on external firewire hard drive

I was just experimenting with making a bootable clone of my Mac HD (OS X 10.5.2) on an external firewire drive. The external drive booted up and all programs worked. However, there were 3 extra folders on the clone: Dev, Net, Home. The folders were empty so I deleted Dev and Net, just to see what would happen. When I restarted the computer, it simply shut down upon reboot. So, I held the option key and rebooted back into my Mac HD.
My (5) questions are:
What are those folders?
Why were they put there?
Can I get rid of them, or hide them?
Once the bootable clone works as a boot drive, can I delete the data from my internal Mac HD or,
Does the bootable clone somehow rely on the internal drive for additional startup information?
Thank you so much for any information.
Dave

These are system folders that the OS needs to operate. DO NOT delete them.
They are normally invisible which is why you don't see them.
You should simply leave them alone. If they bother you visually and you want to hide them, open terminal and run the following command
*sudo chflags hidden /Volumes/"Nameoftheexternaldrive"/dev /Volumes/"Nameoftheexternaldrive"/home /Volumes/"Nameoftheexternaldrive"/net*
Put the name of your external in the above.
You'll be prompted for your admin password which you won't see. That's normal.
To answer your last question, a bootable clone does not rely on the internal drive in any way. You can boot from the clone and do whatever you like to the internal. However, it's not recommended to run your computer from an external for everyday use. Bootable clones should be mainly used for backups. If you hose your system on an internal, boot from the clone and clone it back to the HD.

Are you able to do a non destructively enlarge a volume using Disk Utility?

I have searched a number of articles in the forums, many archived, and I haven't found a clear answer to whether you can enlarge a volume non destructively using Disk Utility.
I am running a G4 PPC OSX 10.4.11 and am working with a Maxtor 300GB FireWire HDD. The volume I am trying to enlarge is the second volume on the Maxtor with free space following it.
I have followed the *Disk Utility Help file* on how to *enlarge a volume*, but cannot complete the procedure because *Step 5 refers to an Apply button*, *but there is none apparent*. There is a Partition button available but then that warns of destroying all the volumes on the disk.
Disk Utility Version 10.5.6.
Thanks for the help.

Your drive just be partitioned using GUID which is only available for Intel machines. An APM partitioned drive cannot be resized on the fly using Disk Utility on a PPC Mac. There are some third-party partitioning utilities like iPartition that may be able to do so on a PPC machine.

Using Disk Utility From Recovery Partition

Is there an advantage to repairing permissions after booting into Recovery disk? (Hold Option key as restart) I realize that Repair disk will be available if needed & it is not available when using Disk Utility from Mac HD partition.

Thanks!
I thought that was the case but I had read multiple accounts of people with slow Macs after upgrading to Mavericks, running repair disk permissions from recovery disk to fix the problem. I wondered why not just run repair permissions w/o restarting into recovery disk. Then they can also run verify disk, if they wish & only if there is a problem with the disk would they need to boot to recovery disk in order to run repair disk.

Erasing Volumes using Disk Utility

I used Disk Utility to make copies of numerous cds and dvds. Doing this created a long list of volumes on my harddrive that I can not delete using erase or erase empty space (these fields are grayed out). I tried booting from the OSX disc however when I did that the volumes weren't even visibile. I also tried converting the disk images to a writeable format. All this did was make a copy of the existing volume. Does anyone know how to delete Volumes in another way, either using disk utiltiy or other software?
Thanks,
Dean
Macbook Mac OS X (10.4.7) disk utility, delete or erase volumes

If you are getting nothing for file system what has gone wrong is something in your computer/operating system, not on the iPod.
Try running Scandisk first, then formatting or, at this is not recommended generally, if that doesn't work partition the iPod and then format it.
But you might also want to consider a reload of XP. I reiterate, if it gave you nothing to select under file system this is most likely a problem with your operating system or USB chain.

Can't press apply button when using disk utility to make a new partition

Similar Messages

Maybe you are looking for