Can´t prevent ExtendScript Toolkit from starting debug mode

Hi,
i have developed a panel in configurator and have installed it in my plugins folder in ID 5.5
If i click buttons, it opens ExtendScript Toolkit and shows me one single yellow line. If i click "Debug" > "Run" it executes
my script, but i have to click "Run" for each button i click in my panel.
It happens only on my computer. On other machines its running fine.
Is there a way to prevent this permanent debug mode startup?
Many thx,
Sven

Could you provide more information? Which button do you click? The script in the editor of ExtendScript Toolkit.

Similar Messages

How can I prevent my iPhone4 from starting after connecting to Power?

How can I prevent my iPhone4 from starting (booting) after connecting to Power?

You can't so far as I know. You can however, shut it down after it's connected to power and it should not power back on as long as it's connected. If the power is disconnected/reconnected, it will power back on.
If you just want to avoid calls, etc. while it's plugged in, you could just put it in airplane mode.

Prevent AppleMobileDeviceService.exe from starting

Windows XP home, 3.2GHz Pentium 4 processor, 4 GB RAM, Dell Dimension 5150
Since starting to use an iPod, AppleMobileDeviceService.exe starts every time I start iTunes. This process takes a tremendous amount of resources to run (50-75% of CPU). I usually go into task manager and kill the process.
How can I prevent this process from starting when I start iTunes?
If this service is not running, how can I start it manually when transferring music? Or does it automatically start when an Apple device is detected?

generally you may access your PC's services by going start > run > and type "services.msc" without the quotations.
Locate the "AppleMobileDeviceService.exe" and right click > properties > change the drop down box from automatic to Manual, then click the "stop" button if you want to stop it.
I have a theory that this might be triggering the iTunes to continuously reopen itself if using wifi sinc.. have you experienced any issues with this?
:::edit:::
I don't *think* the service will start itself when you start iTunes, but i could be completely wrong. On the contrary, if you've disabled the service and then try to sync and nothing happens then you know that's your problem.
Worth playing with.
Also as a further FYI, it's easy to get carried away with disabling services and what not, once you're in you realize it can really improve a boot up process/overal computer functionality, but i encourage you to research what each service does before disabling. surely you thought about this already, though 8)

How can I prevent all workbooks from opening automatically when Excel starts?

I am using Office 2011 (14.2.1) service pack 2 on Mac os X 10.7.3. Whenever I open Excel, all my workbooks open. How can I prevent all workbooks from opening automatically when Excel starts?
Please Help, Thanks

You can look at: Stop Autoplay: https://addons.mozilla.org/firefox/addon/1765

How can I prevent deleted mail from ending up in "All Mail" and "Archives"? To my horror, I've emptied these boxes and lost all my mail from all my boxes (and why do I need to enter this question three times?"

How can I prevent deleted mail from ending up in "All Mail" and "Archives"?
To my horror, I emptied these boxes and lost all my mail from all my boxes .
All mail also disappeared from my iPad, I suppose because they are "synched"
(Also, no offense, but why do I need to enter this question multiple times?)
Thanks for any thoughts.

I'm having a similar but slightly different problem. My company just migrated to Gmail, and it's saving mail drafts every 30 seconds into my Trash folder.
I unchecked the "Show in IMAP" preference in the Gmail settings, but my Drafts folder completely disappeared. I went back and checked it and the folder reappeared (with my drafts still in there).
I like the idea if starting an email on my laptop and having the option of finishing it on my iPhone or iPad, so only saving Drafts locally would not be ideal.

Prevent browser session from starting

I've automated the installation of a workstation using SCCM. One of the applications that is installed during this process, automatically starts an IE browser session when it's done.
Is there a way to prevent the browser from starting? I tried to kill the process after it started using taskkill.exe in a script. It kills the proces, but when i start the browser after that, it generates the message that the browser hasn't been closed correctly
the last time.
If i can't prevent it, is there a way to close the browser in a correct way?

Hi,
It seems that Internet Explorer service runs at Logon. You can use msconfig.exe to check if it's enabled under Startup and Services.
Also, you can see if it will execute during Logon with autoruns.exe.
Here is an article which may help you.
http://support.microsoft.com/kb/2837026
To kill iexplorer process, you can run such command:
Get-Process iexplore | Foreach-Object { $_.CloseMainWindow() }
Andy Altmann
TechNet Community Support

Can't prevent unwanted toolbar from loading in Acrobat Pro 9

I downloaded an evaluation copy of EverMap AutoBookmark plug-in. I prefer not to automatically open toolbars that I don't use regularly when first opening Acrobat, but I can't keep the AutoBookmark toolbars from loading, even if I uncheck those particular toolbars. EverMap support claims that it is a problem in Acrobat. I have also had the same issue with a free plug-in from the Acrobat for Legal Professionals site. Plug-ins work fine, but I can't prevent the toolbars from loading on startup.
Anyone else experience this issue?

Sometimes it is simplest to simply enter the Acrobat folder and move the plugins that are a problem. Just copy then to a backup so you can put them back when you need them. I think that the presence or absence of the plugins is all that Acrobat needs.

Prevent Portal Application from starting

Hello.
We are having problems starting up a portal. Everytime we try to start it we have a java deadlock, and we wonder whether it is possible to prevent an application from starting.
Specifically the application we would like not to start is:
sap.com/cafeuodimnuacceap
Thanks in advance for your help.

I found it:
Using the "Initially_Not_Started_Apps" parameter in Config Tool.
Thanks.

How can we prevent a user from entering a value in Parameter Field?

how can we prevent a user from entering a value in Parameter Field and Select-options Field?

make it invisible, make it inactive, make it display only.
if the field is not there or not to be seen the user WILL have problems inputting data.
BUT once the field is there you can NOT prevent that the user fills it with data.
all you can do is on PAI check if the data the user inputted was good or bad, and clear his inputs, but you can NOT prevent him inputting something.

How can i prevent my pro from over heating?

How can i prevent my pro from over heating?

Don't use the computer in your lap, or on a blanket or pillow. The case bottom is part of the heat dissipation system so it needs air underneath. If you must use the computer in your lap, get a lapboard. There are cheap, even more so if you make one yourself.
If the computer is a older MBP with silver keys, avoid "clamshell" mode when using an external monitor. Those models let a lot of heat escape through the keyboard. The black-key Unibody versions don't seem to rely so much on the keyboard as a vent.
Like eww said, what feels hot to you may not threaten the computer's well-being. Get a temperature monitoring utility. I like this one:
http://bresink.com/osx/TemperatureMonitor.html
It runs politely in the background and puts the readout in the menubar:
so you don't have to invoke Dashboard like some other temp monitors require. As Dashboard loads all its widgets as soon as it's invoked, the extra widget processes can run up the temps and you don't get a true average use temp.
If you use Dashboard a lot, those processes stay active after the first launch and can eat processor cycles as well as increase temps. I use DashQuit, a widget that shuts down Dashboard when I'm done without requiring a computer restart. It's here:
http://www.apple.com/downloads/dashboard/status/dashquit_berenguierduncan.html

Can we prevent the user from saving the document?

Hi All,
I want to know that can we prevent the user from saving an illustrator doc till a condition match.
if we can, then how?
Please comment.
Thanks

You can't prevent it, no. You could continually set the document modified flag to false, which would prevent regular 'Save', but they could always do 'Save As' -- nothing can stop that.

I have checked around the internet, but still can't find any answers. How can I prevent incoming mail from interrupting the music I am listening to on my iPhone? That 1-second muting function drives me insane, especially when a lot of mail is coming in.

I have checked around the internet, but still can't find any answers. How can I prevent incoming mail from interrupting the music I am listening to on my iPhone? That 1-second muting function drives me insane, especially when a lot of mail is coming in.

If you want to hear your music on iPhone without interruption, switch Settings > Airplane Mode: ON.

Windows 7 "a patch is preventing the system from starting" error code 0x490

I have a Windows 7 machine.
It was working fine.
Now it will not boot.
When I try system repair, it says:
Root cause found
A patch is preventing the system from starting.
Repair action: System file integrity cheack and repair
Result: Failed. Error code 0x490
I have tried doing safe mode, last known good configuration etc and nothing works
Also, I tried to restore to an early checkpoint, but it claims that none exist, even thought I know we save restore points.
Please advise?

"I suggest running Command Prompt from the repair menu and then Check Disk:
1. Insert the Windows 7 Disc and boot from it.
2. In the recovery menu, choose Command Prompt .
3. Type the following command and press Enter:
Chkdsk /r /f
Please also try the following commands and press Enter at the end of each line:
Ren C:\Windows\winsxs\pending.xml pending.old
Ren C:\windows\SoftwareDistribution SDOLD
Regedit.exe
When the register editor opens, please navigate to the following key:
HKEY_LOCAL_MACHINE\COMPONENTS:
* High light the COMPONENTS key. Please check if the following values exist in the right pane:
AdvancedInstallersNeedResolving
PendingXmlIdentifier
* If so, please right click on them and choose Delete them. Confirm the operation.
* Restart the computer."
Quote from : Vivian Xing
http://social.technet.microsoft.com/Forums/en/w7itproinstall/thread/227bcd32-f0dd-4aab-942e-07e0cadec083

Can't stop the syncronizer from starting

I am runnning Elements 8 on an XP system. When the Photoshop.Com syncronizer runs, it sucks the life out of my CPU. That would be ok with me because it appears I should be able to tell PS8 to only sync when the system is idle, however I can't keep the syncronizer from starting up.
I stop the syncronizer and I also have turned off the flag to sync when new ablums are created. However if I try to rename an album, the syncronizer fires up no matter what I do. Until the syncronizer stops, I can't use my PC.
Is there a way to fix this?
Thanks,
Joe

On the welcome screen there is an option to manage the account, Sign out from there and it shoould be the perfect. Or after launching the program (Organizer or the Editor) go to the menu bar and click on your name to sign out. Once you sign out it will not syncronize.
You can also try to Open the task manager and under processes end the one that says as backup.

Can you prevent Procurement Wizard from popping up when Procurement Documen

Can you prevent Procurement Wizard from popping up when Procurement Document is checked on the Logistics tab?
We would like to handle all Procurement Documents in a process separate from entry of the Sales Order. Is there a way to not have the Procurement Wizard pop up automatically when a Sales Order has Procurement Document checked and is then added?
Alan

Hi Alan,
Please check Note No. :1524113. There is a change in working of Procurement Wizard as follows which is mentioned in the Note.
In the "Customer" window of the procurement confirmation wizard, the "Include All Open Sales Orders" checkbox was added. If you select this checkbox, all open sales orders with unfulfilled purchase quantities for the selected business partners are displayed.
If you do not select this checkbox, only those sales orders are displayed for which the "Procurement Document" option was checked or that use a drop-ship warehouse and have unfulfilled purchase quantities.
Check in Demo if you do not tick the checkbox 'Procurement Document' and in the Procurement Confirmation wizard, use the 'Include All Open Sales Orders, whether the same helps.
Kind Regards,
Jitin
SAP Business One Forum Team

Can´t prevent ExtendScript Toolkit from starting debug mode

Similar Messages

Maybe you are looking for