Can't Preview MMS images iOS6 (Loading screen forever)

I updated to iOS6 and now images sent to me via text will not open in preview mode when I tap on them.  the thumbnails show up in the conversation.  It just spins the wheel and says loading...  I can click the options and select save to camera roll even though it is not loaded.

I recently had this issue as well on my iPhone 5. I powered off the unit for a minute and turned it back on. Seems like it solved the issue - for now.

Similar Messages

  • How can I get an image from the screen? Like screen printer in PC to pasting after in word or other program.

    How can I get an image from the screen? Like screen printer in PC to pasting after in word or other program.

    If you do Cmd+Shift+3 you'll get a full screen image saved to your desktop as a jpg file.
    Also, you can use Cmd+Shift+4 and you'll get a cursor which you click+drag to draw a box. When you release the drag the boxed in area will be saved to the Desktop as a jpg file.

  • I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen.  Does anyone have any suggestions?

    I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen.  Does anyone have any suggestions?

    Irelandbound wrote:
    thank you, I have the adaptors so glad that would work.  I just heard adaptors burn out often.  So Just thought for my main iMac computer, a plug would be best.  I will get one once I move.
    Any other suggestions or things I should know about apple products in Ireland.  I know there are no Apple stores there.
    An adaptor doesn't burn out. It merely serves as a means to connect the power prongs on your device to the power supply.
    I believe you are thinking of a transformer, which you do not need. A transformer converts one voltage to another.
    You don't need to do that as the power supply of modern electronics can take almost any worldwide voltage.
    Look at the label on the device. It should indicate the input power acceptable of 100-240 VAC, 50-60 Hz.
    Additionally, I found the adapters cheaper in the UK than I found them in the US. They were available in most supermarket chains. I wasn't in Ireland, so I can't say one way or the other.
    If you have something that doesn't have that input power spec, it would require a transformer.
    On other items like electric clocks or things with motors, you can connect them up to a transformer and the voltage will be correct, but the frequency may not. For clocks, that will cause them to not keep time well. For motors, they will burn out.

  • Can't Receive MMS images

    Have 2 Blackberry Tour phones.  One has no issues with receiving MMS, however, the other won't receive them.  I suspect my husband was messing, without understanding what he was doing, with the set up and now his phone won't receive MMS images.  Any ideas on what I can do to fix it?

    Hi,
    Welcome to the forums.  On your device, go to Options>MMS.  Make sure that Multimedia Reception is set to :  Always and Automatic Retrieval:  Always 
    Doc

  • Can't view MMS images unless I save them to my photo album

    Something strange is going on with MMS on my iPhone 4. It seems to have started around the 4.1 upgrade.
    Within the messages app, I can see thumbnails but if I click on an image I get a black screen. If I save the image, I can see it in Photos but can't see it in Messages. All MMS messages behave this way, even the ones that I've sent. I've reset network settings, rebooted, sacrificed a furry woodland creature....nothing seems to help.
    Could it be another app that's interfering with it?

    Yeah, after wasting nearly an hour on the phone with Apple, I came to that conclusion myself. I had to put the phone in DFU mode to get it to restore to 4.0.1. It's pretty telling that the 4.1 beta is no longer on my developer portal.
    Cheers

  • How can I detect an image is loaded in client's browser

    In my jsp page, I have a number of <img> to load, however I would like to jump to another page only after all the <img> are sucessfully loaded in client's browser. Is there any way I can accomplish this by either JSP or java script or any other means ?? My target clients mainly use IE5.5+

    Thanks a lot, I finally found the code :
    <SCRIPT>
    function imageLoaded()
    window.status = "Image " + event.srcElement.src + " is loaded";
    </SCRIPT>
    <BODY>
    <IMG SRC="sample.gif" onload="imageLoaded()">
    </BODY>

  • Can't get past the grey loading screen with the apple

    My ibook was working fine for a while and then all of a sudden I turned it on one day and the desktop came up but none of the icons or toolbars came up. I talked to a few people about that and they seem to think that is was the os going out of whack.
    So, I tried to install tiger and when i did that it would only come up to the blue screen that said it was loading os x.
    So i thought maybe it installed funny so I tried to reinstall it, but it wouldn't let me. I kept getting a bunch of different errors.
    So now, when I try to turn it on it just stays on the grey screen with the apple on it and sometimes the apple goes away and turns into a white square that has dots and lines in it.
    Can anyone PLEASE help me out???

    Hi, and welcome to Apple Discussions.
    Which model iBook is it? (What is its processor's MHz rating?)
    Which version of the OS is installed on it now?
    If OS X 10.2 or above is installed on it, you can try booting into Safe Mode. This will take quite awhile longer than a normal startup because it does a file check and repair of the hard disk.
    If this works you will see your normal desktop. Once completely started up in Safe Mode, try to restart normally, and go to Applications > Utilities > Disk Utility. Click on the top hard drive icon in the left sidebar and note the S.M.A.R.T. status at the bottom right of the pane. What does it say?
    Select the named boot volume in the left sidebar, ("Macintosh HD" unless you've renamed it). What is the hard drive capacity and how much space remains available on it? Repair permissions on it.
    See if you are able to do a little hard drive maintenance to help things out.
    I hope it works for you.

  • Can I use split screens on and extra monitor I have. I can get mirror image on both screens, but not a split screen. The monitor is 1600 x 900.

    Can I use split screens on an extra monitor I have? I can get a mirror image on both screens, but not a split screen. The monitor is 1600 x 900 AOC 20inch monitor. Hope I haven't wasted my money buying this £69 monitor. My 13" Macbook Pro is a little small for my ageing eyes. Thanks

    In the display settings on your computer uncheck "mirrored". This will put the displays in "extended" mode. In extended mode you can set the external display to its native resolution as well as drag windows from your computer to the external monitor. I assume that is what you mean when you say "split screen".

  • How can i resize my image after image trace?

    Hello all!
    I'm just now getting into using illustrator (currently on trial for illustrator cc) and I've taken a couple of my illustrations and attempted to use the image trace. The only way I can seem to get the image trace to actually produce an accurate trace is if I use a very large file size. So I take my scanned image (600 dpi 2000x 1891) and load it into illustrator, and here's where the problem comes in. Illustrator will not show my entire image on the screen. I zoom out as far as I can go and it's still cutting off the bottom and top of the image. When I try to scale the image it won't let me scale it down to even 90%.
    So my question, is there anyway I can load my full size image into illustrator, image trace it, and then scale it down so I can see the whole image on my screen? It's very hard to paint and work around the image when it's getting cut off.
    The first picture is what the whole picture looks like, but it's such a small file size it's blurry and won't image trace correctly.
    The 2nd image is what happens when I load my full image size in, I'm scrolled as high as the page will go and the top is still cut off.

    Hope this helps Trevor.
    There are other ways of doing this, but try this one.
    Menu - ‘Select all’
    Object - ‘transform’ - ‘scale’
    Dialogue box - click ‘uniform’ add number 1% to 100%, your choice
    Options - tick ‘scale stroke & effects’
    tick ‘preview’ to see results

  • Really need help with a loading screen

    Ok, here's my problem, I'm making a puzzle game and I can't seem to make my loading screen work with my main menu. The loading screen is represented by an image filling up with colour where the colouring takes place by means of a thread (and there's a string as well that paints the %) . Now the loading screen is supposed to appear after i click the start button from the main menu and after completely filling up (or when the tread dies) the game panel is suppposed to be show on screen. Between the loading I initialize all the components for the game. Now, when I press the start button, the whole screen freezes (for the duration of the loading thread) after which the game screen appears. What puzzles me more is that if i don't add the game screen the loading screen works like a charm.
    Here's some of the code:
    public void actionPerformed(ActionEvent e){
    if(e.getActionCommand().compareTo("Start")==0){
    //initializing the panel for the loading
    ds=new Load();
    //initializing the thread that makes the panel rainbow dream
    anm=new Ompy();
    x.remove(pent); //pent is the jpanel containing the main menu with the customised buttons, and x is the reference to the current JFrame's content pane
    x.add(ds);
    pack();
    /* MediaTracker tracker=new MediaTracker(this);
    tracker.addImage(ds.pic.im,2); //i tried using a media tracker to wait for the image of the loading jpanel
    tracker.addImage(ds.fill.im,2);
    try{tracker.waitForID(2);}
    catch(InterruptedException ie){} */
    anm.start(); //i start the thread
    //without the folowing code the loading screen works perfectly
    some code
    Winx gs=new Winx(); //the panel containing the game interface
    some code
    while(anm.isAlive()){}
    x.remove(ds); // i remove the loading screen
    x.add(gs); //i add the game screen
    anm=null;
    ds=null;
    setVisible(true);
    gigaslave.requestFocusInWindow();
    pack();
    //here ends the code that shadows my loading screen :((
    else {System.exit(0);}}
    }I appreciate your help.

    Thanks for all your help ...this is what i have so far and am working with:
    import javax.swing.JOptionPane;
    public class TVRemote{
         int volume = 5;
         int channel = 5;
         public void channelUp(){
              if(channel < 25){
                   channel++;
         public void channelDown(){
              if(channel > 1){
                   channel--;
         public void volumeUp(){
              if(volume < 10){
                   volume++;
         public void volumeDown(){
              if(volume > 1){
                   volume--;
    public class VCRemote extends TVRemote{
         String tape = null;
         String mode = "Stop";
         public void insertTape(String t){
              tape = t;
         public void ejectTape(){
              tape = null;
         public void setMode(String m){
              mode = m;
         public String getMode(){
              return mode;
    public String getMode(){
              if(tape == null){
                   System.out.println("There is no tape");
              return mode;
    I know it does have to be set as 2 files....I still need to put in a rewind and fast forward option would that be done the same way that public void insetTape is done? also I was wondering how i will interface it with the user? Cause the only output i see is a display message that there isn't any tape in the vcr.
    Thankgs again for everyones help.

  • How to show more than one image on my screen at same time?

    I recently upgraded to PS-CS4 from CS3 and notice that I can only view one image on my screen. Is there a way to view more than one image on the screen at the same time? I cannot seem to find a way to change this feature.
    Thanks, Richie

    John Joslin wrote:
    In addition, if you don't like the tabs, select Float All in Windows from the Arrange Documents drop-down in the Menu bar up top.
    Or keep pressing the F key.
    The drop-down bar also has a conveneint way of fitting multiple images on the screen. See the illustration below:

  • No preview of images in a folder

    I can't preview any image formats in navigation pane or preview pane of a FOLDER without opening every single image in a new preview window.

    Hi
    I think there is something wrong with Vista and files there. Please go into PUBLIC Public Pictures Sample Pictures folder. Is the same situation there?
    Sorry but I believe you have done something wrong there. I can not believe this strange issue occurs from the first day.
    If you want to be sure install OS again using delivered recovery DVD and everything will work again.

  • Move image on the screen

    I would like to know how can i move an image on a screen using java.

    Use a javax.swing.Timer to drive the "animation".

  • Insert Image Onto Sap Screen

    Hello everyone,
    I want to know that how can we use any image in any screen created in dialog programming (module pool)? I don't want to google it as it forces me to read those confusing codes. i don't know how to do it, so, surely would like to know but looking for a big time help on this topic.
    Thanks for writing back.
    Regards,
    Lucky

    You have to use custom container wherein you place your image.
    Please refer Image in Custom Control.
    Regards
    Marcin

  • Blue loading screen issue

    I've just gotten past the issue with installing Skype and now I can't get passed the blue loading screen i've already tried the cmd fix can anyone help? Also is it doing this because i downloaded it with chrome?

    Please, make the test showing if your Internet Explorer can execute JavaScript.
    Open in your Internet Explorer this page and watch the response:
    http://javatester.org/javascript.html

Maybe you are looking for