Can't print 4X6 photos with upgrade 3.2

I get an error msg when I try to pring 4 by 6 inch phots, can print the other sizes

I cannot print photos. I have 4x6 Kodak Ultra Premium paper. I have a new HP Photosmart C5280 printer with a photo tray. The tray seems only accessible from a camera memory card and my photos are on my computer. In Adobe or the HP Photo programs the same menu comes up and I have gone through all the choices. None will print. Error message keeps repeating "wrong paper size."

Similar Messages

HELP Can't print 4x6 photos

I have been trying off an on since December 05 to print 4x6 boardless photos from iPhoto with no success. I set it up and when it start to prints my printer tells me that I have the wrong size paper. I don't want to use 8x10 photo paper I want to use 4X6 paper. I have read and reread the instructions but I must be missing something. Can anyone help me please. The printer I use is hp 3310 just got it was using a hp 8150

First of all thank you for responding. I tried your suggestion as best I could. I forgot I had 8x10 copy paper in tray and that is what my picture printer on. Next put in photo paper 4x6 in photo tray and machine still said out of paper load more. I even tried to put 4x6 photo paper in main paper tray would not take it. I didn't have any success with the 8150 either.

Yes or No: Can I print 4x6 photos without them being cropped by HP?

Many posts complaining of the same -
HP all-in-ones are cropping 2-3mm on all edges in order to fit 4x6 photo paper.
Simple question:
Yes or No. Is there a solution or setting to fix this?
I'm not looking for workaround such as printing my photos on 8.5x11 and then trimming them myself.
That's just lame.
HP! Are there any plans to fix this design flaw?
Thank you.

Yes.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Trying to print 4x6 photos. How can I print with no borders on LR5 with my HP OfficeJet 7410? Even when in Print mode in LR5, my photos show a border. Page Setup shows "borderless". Image Settings show "zoom to fill". But cannot print, nor even previe

Trying to print 4x6 photos. How can I print with no borders on LR5 with my HP OfficeJet 7410? Even when in Print mode in LR5, my photos show a border. Page Setup shows "borderless". Image Settings show "zoom to fill". But cannot print, nor even preview, without borders.

JimHess~ Many thanks. In my short history with LR, it's amazing how many people I've seen ask this question. I'm nearly embarrassed at how simple the fix was, but grateful that you didn't dismiss such a basic question. You made my week. And my friend's photo album...

IPhoto 08 vsn 7.1.5 software issue. Can't print a photo. When I select print it comes up with the error message "No available themes" There were no themes located. Until at least one theme has been installed, this feature will be unavailable. ugh

Can't print a photo. When I select print it comes up with the error message "No available themes" There were no themes located. Until at least one theme has been installed, this feature will be unavailable. ugh. Uploaded latest update but it still doesn't work. Was going to try and load the software again but can't find the source as a download.
Cheers,
Papasailor

YOu need to reinstall iPhoto.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

Unable to print borderless 4x6 photos with the Photosmart 7510 printer.

I am unable to print borderless 4x6 photos with the Photosmart 7510 printer. There are no option listed for any size borderless printing when i choose the paper size and paper type. I am running Windows 7 Home Premium 64-bit.
This question was solved.
View Solution.

I found it. Once you hit print, click on the options link. It opens a separate window. In that window there are two links, one says color management and the other says printer properties, click printer properties. That opens a new window, in that window click the advanced button. That opens a new window titled HP 7510 Advanced options, under the printer feature section near the bottom you will see "Borderless Printing". Left click on that and to the right a drop down menu opens, select borderless, hit ok. After you do this, it will print borderless however you will still NOT see that option when you print, like you used to with the older HP printers. I couldn't find it in the help section, I just stumbled upon it, very frustrating! It will print borderless.

I have elements 12 Mac and I can not print 4X6, it comes out 8X10 using HP 5270. It was fine until now. I can print 4X6 with iPhoto. Help!

I have elements 12 Mac and I can not print 4X6, it comes out 8X10 using HP7520. It was fine until now. I can print 4X6 with iPhoto and off the printer scanner. Help?

I should add that it's an HP photosmart 4280.I found it online and it shows the Mac 0SX operating system.

Printing 4x6 photos on HP Laserjet 4630. photo paper tray not working?

I am trying to print 4x6 photos on glossy paper. My printer has a photo paper tray in addition to a standard letter tray. When I specify 4x6 borderless glossy paper in the print parameters, the printer keeps pulling from the standard paper tray instead of the photo tray on top of the printer. This has worked for me in the past, but I haven't used it in a long time. What must I be doing wrong?

Hey. I'm a photographer with the C4280.
This printer takes care of 8.5 x 11's pretty much perfectly. But 4 x 6 not for me on iPhoto or Photoshop.
So what I did was I set up a pages document with a blank template, set at 4 x 6 inches.
I dragged rulers about .25inches in and threw in the photo set at 4 x 6 ratio. So... most photos are 4 x 6, just resize it to fit in the rulers.
I've noticed in most occasions it cuts off the top of the photo document when laid out in portrait.
What I do is a hit command p, select the printer but choose under the drop box that says "layout" i hit borderless printing, and a selectable box will show up saying "print borderless" and i just clicked it.
on the document though you might want to make the opacity 10% to save ink. you have to trouble shoot the exact place to set and drag up or down the photo. but once you get it, its reliable the duration the document is open and the printer is on.
i know its kind of pointless for one, but i had a shoot with live printing on the spot with this printer and its great. you can add texts boxes and put those perfectly where you want (once you set the picture so its set) and throw in another picture and really customize the 4 x 6.
i printed a postcard with the writing already in it. just had to mail it no writing involved.
you also need iwork 08 or 09. i have 08 but im sure 09 works. so if you save the pages doc as a template you can just drag in the image file into where the old image is and print that way.
command p, choose borderless printing in the drop box and click print borderless. it should work.
email me for a copy of my pages document. [email protected]
i promise though, with canon or epson 4 x 6 print paper, its pretty amazing. almost comparable to my prints from my printer.
or you can fit 12 3.5 x 2inch (business card sized) pics on an 8.5 x 11.

I am suddenly having a problem printing 4x6 photos. The print as though starting in the middle of an 8x10 sheet. I've checked and double-checked the print settings. Anyone else have this problem?

I am suddenly having a problem printing 4x6 photos. The print as though starting in the middle of an 8x10 sheet. I've checked and double-checked the print settings. Anyone else have this problem?

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

HT4505 can you scan 4x6 photos using Image Capture that will actually scan as a 4x6 photo. I have to crop the photo once it is scanned

Can you scan multiple 4x6 photos using image Capture that will actually scan as a 4x6 photo? I seem to have to crop each photo once it is scanned.

How long is a string?
The answer depends on a large number of variables
Cropping removes the area cropped off so the pixel size of a cropped photos is smaller than an upcropped one
With iPhoto you can always revert ot the original so if the new quality is not enough for your use you can go back to the uncropped original
size - many meanings
DPI - simple - Dots Per Inch - the number of dots (pixels) in a dimension divided by the number of inches of the display(print) - very simple math
Pixels and dots are the same for this discussion
so if a photo is shot in a 3:2 ratio (6x4 is also a 3:2 ratio) then the photo is the shape of a 4x6 photo with no cropping - is a photo shot in a 4:3 ratio is cropped to a 4:6 ratio (which is also a 3:2 ratio) then some information is going to be removed - assuming that you set the cropping frame as large as possible in one direction and only crop two sides then you lose the minimum amount of information
Most iPhoto uses of photos are designed aroung 4:3 photos so in general I would only recommend cropping 4:3 photos if you want to print them in standard print sizes
iPhoto slide shows will work best with 4:3 photos so cropping to 4:6 would be a mistake
LN

I can not print web pages with my HP Deskjet 5440

I can not print web pages with my HP Deskjet 5440. I use Vista, no error page, just prints a blank page with headers and footers. Recently reinstalled printer driver from HP.

Hello , Welcome to the HP Support Forums!
I understand that since upgrading your Mac OS X 10.10 computer to Mac OS X 10.10.4 you have been unable to print colour photos wirelessly from your HP Officejet 5740 e-All-in-One Printer. I would like to assist you today with resolving this colour printing issue. To be honest, it does sound like Mac may have loaded the generic Apple Airprint driver on your printer rather then the HP Full Feature Software and Driver package. Should this be the case then you will only have basic print capabilities. Please follow the steps below to confirm that your HP Officejet is utilising the correct driver on your Mac.
1. Click the Apple menu, and then click System Preferences. 2. Click Print & Scan, and then check if the name of your printer displays in the Printers list. 3. Click the name of your printer, click the minus sign (), and then delete the printer.  4. Click the plus sign (), click Add Printer or Scanner, click the name of your printer, 5. Click the Use or Print Using box, and then select the name of your printer in the pop-up menu. Ensure that the Officejet driver is selected and not the Airprint driver.
  6. Click Add to add the printer to the list.  Once your printer has been installed with the correct HP driver, please test printing a colour photo to confirm that the issue has been resolved. Please respond to this post with the result of your troubleshooting. Should the issue persist there are additional software and driver troubleshooting steps I will have you perform. I look forward to hearing from you!

I cannot print 4x6 photos only 8.5x11

When I try to print a 4x6 photo it looks like it has a red haze to it. When I try to print the same picture on 8.5x11 it prints perfectly. How do I get the printer to print 4x6 photos. I am using HP paper. Can you help?

Hi there eod126,
Could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Can't print in PSE11 after upgrading to windows 8.1

I have just upgraded from Windows8 to 8.1 and now can't print in PSE11. For some reason can in PSE7

I can print from other programs but not PSE. I have updated the drivers. I have attached 3 screen shots with error messages.
Tracy Ferreira 2607 Woodruff Rd.
Suite E-126
Simpsonville, SC 29681(864)350-4724www.onthespotportraits.com
From: hatstead <[email protected]>
To: Tracy Ferreira <[email protected]>
Sent: Tuesday, March 10, 2015 1:58 PM
Subject: can't print in PSE11 after upgrading to windows 8.1
can't print in PSE11 after upgrading to windows 8.1
created by hatstead in Photoshop Elements - View the full discussionWhat happens when you try?Any error messages?Do you have the latest drivers for the printer? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7274523#7274523 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7274523#7274523 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I can't print a photo because the ICC profile is not installed. What do I do?

I can't print a photo because the ICC profile is not installed. What do I do?

Try from the Editor "Save As"
Then choose jpeg with sRGB profile.

If I go to PS and add layers can I bring the photo with layers back to Lightroom?

If I go to PS and add layers can I bring the photo with layers back to Lightroom?

JoeKostoss wrote:
This is more complicated than I expected: I had to go back to LR to check what I did previously. Here is what I found. I hope this helps to explain what can be done. You can have both layers and LR adjustments; you just cannot see the layers in LR nor can you see the LR adjustments in PS. The good news is that they are both there and can be changed as needed.
I have a photo (Raw) of a blue jay sitting on a branch with the background out of focus.
I made many of the usual LR edits such as exposure, contrast, whites, blacks, sharpening, etc.
I wanted to print it as a Birthday Card so I sent it to PSCC 2014 as a smart object.
In PS, I added a type layer "Happy Birthday"
Back in LR, I now have a psd Happy Birthday file stacked with the original raw file.
Fine and as yet, no ADDITIONAL LR edits AFTER rendering right?
I made some LR adjustments to the psd file such as crop to a different aspect ratio and add a vignette.
I printed the psd file on a folded card.
So far so good, you're still in LR. LR can take the new edits made there AND the layers and spit out a print. Nothing new or special here.
Later I wanted to use that same image as a anniversary card.
I told LR to edit that same psd file in PSCC 2014, this time not a smart object, but selecting "Edit Original".
You got your original layered file. Nothing new or special here.
PS opened with the "Happy Birthday" type layer intact and with the smart object background layer. Of course, the LR edits, crop and vignette on the psd file were not visible in PS.
Because they don't exist there! They will when you render them.
I clicked the eye of the Happy Birthday to render it invisible.
I added a new "Happy Anniversary" type layer.
Saved the new revised psd file and returned to LR.
In LR, I still have only 1 psd file stacked with the original raw file, but now it says Happy Anniversary. Note: sometimes it may take a few moments for the new PS edits to appear. By selecting another image and then reselect this psd file tends to speed this rendering of the new image.
So where in all this is the LR edits you produce AFTER up created the layers after opening the layered doc in PS?
I now have a new card ready to print just as before with all the LR edits originally made on the birthday card including the LR edits, crop and vignette made on the original psd file.
And as far as I can tell, all those edits were applied in PS AFTER rendering.
If I send that psd file a third time to PS, I still have the smart object layer, and both type layers. I can add a 3rd type layer "Happy Easter" if I so desire and return to LR.
Again, the crop and vignette are seen in the one psd file in LR.
So...yes, I can have both layers AND LR adjustments including the original raw adjustments through the smart object background.
No, you have a layered file and you have instructions but the layered file isn't rendered with those instructions and doing so would flatten the results.

Can't print 4X6 photos with upgrade 3.2

Similar Messages

Maybe you are looking for