Can't Print Acrobat 9.1.2 after Installing ) OSX v 10.6.3
Today I moved from 10.6.2 to 10.6.3. Immediately thereafter I tried to print a pdf document in Acrobat. When I hit the "print" button, Acrobat quit. This has now happened repeatedly, after multiple restarts. I have shut down all other applications but Acrobat with no change. All was well this morning with 10.6.2--I printed several .pdf documents. I can't believe this is a bug, assuming that Apple puts its vain dismissals of Flash aside when testing a mew version of OSX against probably the most-used Adobe application. Any help would be appreciated.
Check Adobe website to determine if you need to update it.
If you did not repair permissions after installing the os, boot from your install disc & run *Repair Disk* from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click *Repair Disk.*
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751
Similar Messages
-
suddenly I can't print any web page. After the print command it wants me to save as an XPS file and I can't get past that.
== This happened ==
Every time Firefox opened
== few weeks agoI found that Firefox/XPS had deleted all printer driver setups except for the XPS connection. I had to reinstall my printer connection in order to have that selection present in the printer dialogue box.
-
Remote printer is recognized but message says can't find printer? It worked great before installing OSX Maverick?
Thank you for your response.
Unfortunately I have already rebooted the router and that did not fix the problem. The weird thing is that the computer is connected to the network, it just won't connect to my computer. I have printed the network configuration page to confirm this, and it says the wireless signal is strong.
I have not changed anything at all recently in terms of routers, networks, etc. The printer stopped working completely randomly.
Is there a part in the printer that like emits a signal which computers, phones, etc are supposed to detect? I don't know enough about the mechanics to really theorize about what is wrong, but it seems like that is the only thing that stopped working.
Do you have any other suggestions? -
Hello people,
I can't update iPhoto after installing OSX 10.9.2, it has the name otto@**** in the apple ID box and will not let me change it. Any thoughts?
Thanks
<Email Edited By Host>You installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
Important: The app you need to remove is not necessarily the one named in the App Store alert. For example, the App Store may prompt you to update "Angry Birds" or "Twitter," but the hacked app may be something else entirely. Don't make any assumptions about which app you're looking for. To find it, you must carry out a systematic search with Spotlight.
1. Triple-click anywhere in the line of text below on this page to select it:
kMDItemAppStoreHasReceipt=1
Copy the selected text to the Clipboard by pressing the key combination command-C.
2. In the Finder, press command-F to open a search window, or select
File ▹ Find
from the menu bar. In the search window, select
Search: This Mac
from the row of tokens below the toolbar. Below that is a popup menu of search criteria, initially showing Kind. From that menu, select
Other...
A sheet will drop down. In that sheet, select
Raw Query
as the criterion, then click OK or press return.
Now there will be a text box to the right of the menu of search criteria. That's where you enter the raw search query. Click in that box and paste the text you copied earlier by pressing command-V.
4. The search window will now show all the App Store products that are installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
At least one of the apps in the Spotlight search results is not among your purchases in the App Store. Move each such item to the Trash, after quitting it if it's running. You may be prompted for your administrator password. Empty the Trash.
Quit and relaunch the App Store. Test.
If you find these instructions confusing, ask for an alternative method. -
How can I retrieve my contacts and pictures after installing iOS6 on my iphone?
How can I retrieve my contacts and pictures after installing iOS6 on my iphone? Don't call me stupid! I was relying on iCloud to have backed all this up, but turns out it didn't work. Can anyone help me get my photos back - they were of my baby daughter. Also, I've lost all my contacts. Please help.
Unfortunately no. The only way the phone backs up is if you make it back up. You either connect to iTunes and backup and sync, or you set it up for a wifi sync to iCloud. But you have to setup iCloud to start with. You have learned a hard lesson on how to make sure you import pictures on a regular basis like you would the digital camera. When things happen to the phone, this is the media that is lost the most (pictures in camera roll). After taking a number of pictures, and especially ones you consider important, you should connect the phone to the computer and import them, so there is a backup copy on the computer.
Contacts are saved in the backup as well, however they are really designed to be synced to a supported application on the computer, or backed up to iCloud or other cloud service. And, the only way to go back in time on the phone is to restore from a backup, but you also have to remember, you would lose everything on the phone that you had done since that backup, so it is a double edged sword. -
Why can´t i connect to Windows servers after installing Lion?
Why can´t i connect to Windows servers after installing Lion?
Me too!
MacBook Pro 15" 2011, OS X Lion 10.7 -
Can't log in as WebDB administrator after install
Can't log in as WebDB administrator after install. At http://mymachine.mydomain.com:7777/pls/htmldb/htmldb_admin/
username = admin
password = my password during the installation
and then the page just hangs.
I think I have a configuration problem with marvel.conf. Can anyone help?
Here are the relevant details that may help diagnosing the problem.
I can get to the HTTP Server page at http://mymachine.mydomain.com:7777/
Environment Fedora core 4 Linux on a x86 PC with 512m memory
Oracel Database version 10.2.0.1.0 -- runs fine considering there is only 512 of memory
Installed Companion CD (comes with WebDB 1.6)
Upgraded to WebDB 2.0
Installed patch bug4554072
-- All installs were semi painful but error free
my marvel.conf
Alias /i/ /u01/app/oracle/product/10.2.0/companion/htmldb/images/
<Location /pls/htmldb>
Order deny,allow
PlsqlDocumentPath docs
AllowOverride None
PlsqlDocumentProcedure wwv_flow_file_manager.process_download
PlsqlDatabaseConnectString mymachine.mydomain.com:1522:devel ServiceNameFormat
PlsqlNLSLanguage AMERICAN_AMERICA.WE8ISO8859P1
PlsqlAuthenticationMode Basic
SetHandler pls_handler
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
PlsqlDefaultPage htmldb
PlsqlDatabasePassword mypassword
Allow from all
</Location>
AddType text/xml xbl
AddType text/x-component htc
my dads.conf -- I added nothing here
# ============================================================================
# mod_plsql DAD Configuration File
# ============================================================================
# 1. Please refer to dads.README for a description of this file
# ============================================================================
# Note: This file should typically be included in your plsql.conf file with
# the "include" directive.
# Hint: You can look at some sample DADs in the dads.README file
# ============================================================================
my .bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
unset USERNAME
# Oracle Settings
TMP=/tmp; export TMP
TMPDIR=$TMP; export TMPDIR
ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/product/10.2.0/db_1; export ORACLE_HOME
ORACLE_SID=devel; export ORACLE_SID
ORACLE_TERM=xterm; export ORACLE_TERM
PATH=/usr/sbin:$PATH; export PATH
PATH=$ORACLE_HOME/bin:$PATH; export PATH
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib; export LD_LIBRARY_PATH
CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib; export CLASSPATH
#LD_ASSUME_KERNEL=2.4.1; export LD_ASSUME_KERNEL
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fi
-- I can connect to the database as HTMLDB_PUBLIC_USER
SQL> connect HTMLDB_PUBLIC_USER/mypassword@devel
Connected.
SQL>
-- the HTTP_Server seems to be working fine
$ /u01/app/oracle/product/10.2.0/companion/opmn/bin/opmnctl status
Processes in Instance: standalone
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
HTTP_Server | HTTP_Server | 2544 | Alive
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
my error.log
[Tue Mar 7 18:46:53 2006] [notice] FastCGI: process manager initialized (pid 20766)
[Tue Mar 7 18:47:02 2006] [notice] Oracle-Application-Server-10g/10.1.2.0.0 Oracle-HTTP-Server configured -- resuming normal operations
[Tue Mar 7 18:47:02 2006] [notice] Accept mutex: fcntl (Default: sysvsem)
[Tue Mar 7 18:52:42 2006] [error] [client 192.168.1.47] [ecid: 1141775562:192.168.1.46:27172:0:6,0] File does not exist: /u01/app/oracle/product/10.2.0/companion/htmldb/images/javascript/htmldb_get.js
[Tue Mar 7 18:52:42 2006] [error] [client 192.168.1.47] [ecid: 1141775562:192.168.1.46:27172:0:7,0] File does not exist: /u01/app/oracle/product/10.2.0/companion/htmldb/images/css/htmldb_V2.css
[Tue Mar 7 18:58:18 2006] [error] [client 192.168.1.47] [ecid: 1141775898:192.168.1.46:20917:0:9,0] File does not exist: /u01/app/oracle/product/10.2.0/companion/htmldb/images/javascript/htmldb_get.js
[Tue Mar 7 18:58:18 2006] [error] [client 192.168.1.47] [ecid: 1141775898:192.168.1.46:20917:0:10,0] File does not exist: /u01/app/oracle/product/10.2.0/companion/htmldb/images/css/htmldb_V2.css
my access.log
192.168.1.47 - - [07/Mar/2006:18:51:40 -0500] "GET /pls/htmldb HTTP/1.1" 302 5
192.168.1.47 - HTMLDB_PUBLIC_USER [07/Mar/2006:18:51:49 -0500] "GET /pls/htmldb/htmldb HTTP/1.1" 302 5
192.168.1.47 - - [07/Mar/2006:18:52:42 -0500] "GET /i/javascript/htmldb_html_elements.js HTTP/1.1" 200 15990
192.168.1.47 - HTMLDB_PUBLIC_USER [07/Mar/2006:18:52:42 -0500] "GET /pls/htmldb/f?p=4550:1:8908757969697315233 HTTP/1.1" 200 5078
192.168.1.47 - - [07/Mar/2006:18:52:42 -0500] "GET /i/javascript/htmldb_get.js HTTP/1.1" 404 366
192.168.1.47 - - [07/Mar/2006:18:52:42 -0500] "GET /i/css/core.css HTTP/1.1" 200 6032
192.168.1.47 - - [07/Mar/2006:18:52:42 -0500] "GET /i/css/htmldb_V2.css HTTP/1.1" 404 359
192.168.1.47 - - [07/Mar/2006:18:52:42 -0500] "GET /i/htmldb/oracle_htmldb_logo.gif HTTP/1.1" 200 3213
192.168.1.47 - - [07/Mar/2006:18:52:42 -0500] "GET /i/htmldb/builder/1px_trans.gif HTTP/1.1" 200 43
192.168.1.47 - HTMLDB_PUBLIC_USER [07/Mar/2006:18:58:13 -0500] "GET /pls/htmldb/htmldb_admin HTTP/1.1" 302 5
192.168.1.47 - HTMLDB_PUBLIC_USER [07/Mar/2006:18:58:18 -0500] "GET /pls/htmldb/f?p=4550:10:3783099702329307520 HTTP/1.1" 200 4081
192.168.1.47 - - [07/Mar/2006:18:58:18 -0500] "GET /i/javascript/htmldb_get.js HTTP/1.1" 404 366
192.168.1.47 - - [07/Mar/2006:18:58:18 -0500] "GET /i/css/htmldb_V2.css HTTP/1.1" 404 359rmelideo,
Firstly, you refer to "WebDB administrator" and "WebDB 1.6". This is not WebDB. You're confusing this with an entirely different product released in the late 90's.
You don't say what your specific error is. But the file does not exist errors in your Apache error log look suspicious. It looks like you have not copied the images directory from the HTML DB 2.0 distribution.
Joel -
I can't open InDesign (CS4 Design Standard) after installing, says: "Error: 5" <--- What does this meen?
do this, Configuration error 16 | CC, CS
and then reinstall -
How can I get my safari to open after installing the new Mavericks operating system?
How can I get my safari to open after installing the new Mavericks operating system?
Thanks Carolyn. Unfortunately, this didn't work. It turned out to be in my display monitor as I have my computer wired to my tv for streaming. Once I changed the monitor display it worked fine. Go figure
-
After installing OSX Mountain Lion I can no longer add attachments of any kind to my e-mails.
After installing OSX Mountain Lion I can no longer add attachments of any kind to my e-mails.
Wait for the developers to update their games to work with Lion.
-
Which unity accts can I take off "domain admin" group after install
Hi
Unity 5.X in UM mode - Which unity accts can I take off "domain admin" group after install (ie unityinstall, unityadmin, UnityMsgStoreSvc, UnityDirSVC etc..)
and if I do so, what is the impact or if I want to upgrade in the future?
ThanksUnityInstall should be the most powerful account and is the only account that should be added to the Domain Admins group by the Permissions Wizard. This is definitely true for Exchange 200, 2003, and 2007. I've not dealt with a lot of customers on 2010 yet so this could have changed; however, I doubt it. You can verify what I'm telling you here:
http://www.ciscounitytools.com/Applications/Unity/PermissionsWizard/Unity403_411/Help/PWHelpPermissionsSet_ENU.htm
This link will tell you what permissions and group memberships are set at a high level for all the Unity service accounts.
To clarify what Jonathan said, by "downgrade" the UnityInstall account - the rule of thumb is this:
Cisco supports that you DISABLE the UnityInstall account, if desired, after an installation. This account should only be used during installation activities. However, DO NOT DELETE the account in AD. So, again - disabling the account is OK.
Hailey
Please rate helpful posts! -
After installing OSX 10.9.3 laptop will freeze
It seems as if after installing the update for mavericks 10.9.3 I am getting tons of freezing on my laptop. It happens sporatically and doesn't seem to be a direct result of me doing anyhing in perticular. The screen will just suddenly spaz out and then the whole laptop will freeze up.
Here is a copy of my perticulars
EtreCheck version: 1.9.11 (43) - report generated May 30, 2014 at 12:06:56 PM EDT
Hardware Information:
MacBook Pro (17-inch, Late 2011)
MacBook Pro - model: MacBookPro8,3
1 2.4 GHz Intel Core i7 CPU: 4 cores
16 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 512 MB
AMD Radeon HD 6770M - VRAM: 1024 MB
System Software:
OS X 10.9.3 (13D65) - Uptime: 0 days 0:15:56
Disk Information:
APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 749.3 GB (520.84 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Apple Inc. iPhone
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Logitech USB Optical Mouse
Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[kext loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) Support
[not loaded] com.cisco.nke.ipsec (1.0.0) Support
[kext loaded] com.techsmith.TACC (1.0.2 - SDK 10.7) Support
Startup Items:
CiscoVPN: Path: /System/Library/StartupItems/CiscoVPN
esets_daemon_si: Path: /Library/StartupItems/esets_daemon_si
Problem System Launch Daemons:
[failed] com.apple.pfctl.plist
Launch Daemons:
[loaded] com.google.keystone.daemon.plist Support
[running] com.leapmotion.leapd.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.parallels.mobile.dispatcher.launchdaemon.plist Support
[loaded] com.parallels.mobile.kextloader.launchdaemon.plist Support
[running] com.splashtop.streamer-daemon.plist Support
[loaded] com.splashtop.streamer-srioframebuffer.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.leapmotion.Leap-Motion.plist Support
[loaded] com.parallels.mobile.prl_deskctl_agent.launchagent.plist Support
[not loaded] com.splashtop.streamer-for-root.plist Support
[running] com.splashtop.streamer-for-user.plist Support
User Launch Agents:
[failed] com.adobe.ARM.[...].plist Support
[loaded] com.citrixonline.GoToMeeting.G2MUpdate.plist Support
[loaded] com.parallels.mobile.startgui.launchagent.plist Support
User Login Items:
gfxCardStatus
CheatSheet
Arranger
iTunesHelper
Battery Health
Dropbox
QuikIO
Google Chrome
BetterTouchTool
ESET NOD32 Antivirus 4
Internet Plug-ins:
JavaAppletPlugin: Version: 14.8.0 - SDK 10.9 Check version
o1dbrowserplugin: Version: 3.19.1.13088 Support
nplastpass: Version: 2.5.5 Support
Unity Web Player: Version: UnityPlayer version 4.1.3f3 Support
Default Browser: Version: 537 - SDK 10.9
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.04 - SDK 10.6 Support
Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 3.19.1.13088 Support
SharePointBrowserPlugin: Version: 14.4.2 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.04 - SDK 10.6 Support
npgtpo3dautoplugin: Version: 0.1.44.28 - SDK 10.5 Support
MeetingJoinPlugin: Version: (null) - SDK 10.6 Support
Safari Extensions:
LastPass: Version: 3.1.21
Open in Internet Explorer: Version: 1.0
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
WebEx64: Version: 1.0 - SDK 10.6 Support
3rd Party Preference Panes:
None
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Time Machine not configured!
Top Processes by CPU:
4% WindowServer
1% fontd
1% Microsoft Lync
0% Leap Motion
0% CheatSheet
Top Processes by Memory:
180 MB com.apple.IconServicesAgent
131 MB Finder
131 MB Google Chrome
98 MB WindowServer
82 MB ocspd
Virtual Memory Information:
10.31 GB Free RAM
3.19 GB Active RAM
898 MB Inactive RAM
1.61 GB Wired RAM
745 MB Page-ins
0 B Page-outsI have the same problem. After installing OSX 10.9.3. my Macbook freezes more than 7 times. The problem came up after switching via Thunderbold to a second screen or after "waking" the macbook up. The last time osx didn't boot anymore. It freezes after the "Apple Logo" came up. (grey screen).
After booting the system with "cmd+V" OSX started again. Now I'm afraid to shut down the system and the macbook runs all day.
I hope someone can help me, here my perticulars:
EtreCheck version: 1.9.11 (43) - report generated 2. Juni 2014 08:50:50 MESZ
Hardware Information:
MacBook Pro (15-inch, Late 2011)
MacBook Pro - model: MacBookPro8,2
1 2.4 GHz Intel Core i7 CPU: 4 cores
8 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 512 MB
AMD Radeon HD 6770M - VRAM: 1024 MB
System Software:
OS X 10.9.3 (13D65) - Uptime: 0 days 16:58:21
Disk Information:
TOSHIBA MK7559GSXF disk0 : (750,16 GB)
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) / [Startup]: 749,3 GB (135,67 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Western Digital External HDD 500,11 GB
EFI (disk1s1) <not mounted>: 209,7 MB
DATEN2 (disk1s2) /Volumes/DATEN2: 87,11 GB (8,14 GB free)
DATEN (disk1s3) /Volumes/DATEN: 412,66 GB (24,8 GB free)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Configuration files:
/etc/hosts - Count: 30
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[kext loaded] at.obdev.nke.LittleSnitch (4052 - SDK 10.8) Support
[kext loaded] com.Cycling74.driver.Soundflower (1.5.2) Support
[kext loaded] com.Cycling74.driver.WondershareAudioDevice (1.5.2) Support
[kext loaded] net.telestream.driver.TelestreamAudio (1.0.5 - SDK 10.6) Support
Problem System Launch Agents:
[loaded] com.paragon.NTFS.notify.plist Support
Launch Daemons:
[running] at.obdev.littlesnitchd.plist Support
[failed] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
Launch Agents:
[running] at.obdev.LittleSnitchUIAgent.plist Support
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS5ServiceManager.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[loaded] com.google.keystone.agent.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items:
iTunesHelper
Mail
Google Chrome
Dropbox
Spotify
Internet Plug-ins:
FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.0 - SDK 10.6 Support
Flash Player: Version: 13.0.0.214 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.0.0 Support
JavaAppletPlugin: Version: Java 7 Update 60 Check version
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Growl Support
Java Support
Launchpad-Control Support
Paragon NTFS for Mac ® OS X Support
Time Machine:
Time Machine not configured!
Top Processes by CPU:
4% WindowServer
1% fontd
0% Little Snitch Agent
0% Little Snitch Network Monitor
0% systemstatsd
Top Processes by Memory:
336 MB mds_stores
180 MB com.apple.IconServicesAgent
180 MB Mail
172 MB Finder
147 MB softwareupdated
Virtual Memory Information:
2.51 GB Free RAM
2.96 GB Active RAM
1.18 GB Inactive RAM
1.34 GB Wired RAM
2.37 GB Page-ins
0 B Page-outs -
HT6114 I cannot log in to my AOL after installing OSX Mavericks
Why can I cannot log into to my AOL account after installing OSX Mavericks?
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
computer and after the chime press and hold down the OPTION key until the boot manager
screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo). -
Error in finder after install osx mavericks
error in finder after install osx mavericks
I have a similar problem but the error code that keeps coming up is -600 please help !
-
I have an Mac air 2011 and after install osx mountain lion when I do update to some programs like iMovie and iPhoto and make sleep mode to dowenloaded it doesn't dowenloaded in sleep mode it stop please help me
i guess you could put the aiport utility app on your iphone, click on the aiport express there, it will show you how many devices are connected to it and the mac addresses of those devices.
Maybe you are looking for
-
Setting Up Multiple iPhones On One iTunes Account
Our business supplies iPhones to our technicians out in the field and I've set each phone up under the same iTunes account. Can someone please help me out on the below things that I need to be able to manage? I need to be able to back up each iPhone
-
How to play mp4 audio files as video on my iPod Touch?
I know you are all thinking that this is a stupid question based on the topic, but I have videos for some reason that are in the form of mp4 audio, but they are video when I play them on my computer. I can open these videos (mp4 audio instead of mp4
-
How can I get a full song to play completely before it stops in the first 20 seconds?
Has this happen to anybody else?
-
Servlet Class dependency is not found at weblogic startup.
I have the following ear file which includes: web-inf\lib (contains all the needed utilities jar) *ejb.jar *webapp.war (The WEB-INF\lib dir inside war file contains all the needed utilities jars. I get the following BEA-101250 error saying that a ser
-
I would like to display some info in htmlb table view. cud anyone help me ?