Can't print after iTunes and Quicktime upgrade

I installed the upgrades to iTunes 7.1 and Quicktime 7.1.5. Now none of my applications can print to any of my printers. The behavior is that the print window appears normal, and I can "Save to pdf". When I click "Print" the appllication pops up an error message saying that printing is not possible. Eudora says it was trying to "allocate a GrafPort". the other apps give an uninformative message. I've tried both Apple and non-Apple apps. I haven't found an app that can print to any of my 3 priinters - 2 via USB, 1 via network connection.
I've reinstalled both upgrades and 10.4.8 and Security and patch. I've repaired permissions. The drivers are up to date. I zapped the PRAM. I can still print from my bootable backup. I've tried to use Fixamac's Printer Server Repair utility. It runs on the bootable backup, but it rejects my user passwords on the broken system (i.e., I can't run it)
I can live with the bootable backup for awhile, but I'd appreciate any advice for tracking down and fixing the problem.

in the CUPS error log I see several instances of the following
[09/Mar/2007:22:36:58 -0500] Full reload complete.
I [09/Mar/2007:22:54:03 -0500] Scheduler shutting down normally.
I [09/Mar/2007:22:55:24 -0500] Listening to 0:631
I [09/Mar/2007:22:55:24 -0500] Listening to 300f70:0
I [09/Mar/2007:22:55:24 -0500] Loaded configuration file "/private/etc/cups/cupsd.conf"
I [09/Mar/2007:22:55:24 -0500] Configured for up to 100 clients.
I [09/Mar/2007:22:55:24 -0500] Allowing up to 100 client connections per host.
I [09/Mar/2007:22:55:24 -0500] Full reload is required.
E [09/Mar/2007:22:55:24 -0500] LoadAllClasses: Unable to open /private/etc/cups/classes.conf - No such file or directory
Could this missing file be the source of my problem?

Similar Messages

HP Officejet 6500 can't print after 10.6.6 upgrade

I have a HP Officejet 6500 and can't print after 10.6.6 upgrade. Scan copy and fax are fine. I also cannot get the HP utility to recognize the device. Connected via USB.

Same issue via ethernet.
Can print installing as printer from system preferences, but the HP utility cannot recognize the device.
Message was edited by: Angelo77

Why can't i install itunes and quicktime on my windows 7 64 bit pc

I have always failed trying to install iTunes to my Windows 7 64 bit PC. When installing it'll pause for a long time in this stage:
After a while it'll then show this message:
I tried it a couple of times and it always ends up like this. And moreover, when I tried installing QuickTime it ends up the same?
Anybody can help me with this???

SAME PROBLEM I HAVE.

Can't install the iTunes and Quicktime

I've downloaded the latest version iTunes, it's make PC switch off automatically when I tried to install
Also, it's show " some files could not be created"after reinstall,(i've tried to install many times...) what that means?
I tried to install the Quicktime,it's turned PC off and reboot automatically, How can I do???
I've disable the antivirus and antispy already.
Fujisu Windows XP

I've downloaded the latest version iTunes, it's make PC switch off automatically when I tried to install
hi kkcok!
are you getting any sort of blue screen? if so, what numerical and text codes are you getting with it? (ie 0x[zeros/letters/numbers] CAPSANDUNDERSCORES)
here's a reference on the sorts of things i'm asking about:
Troubleshooting Windows Stop Messages
if you're not seeing a blue screen (or just a flash of one), we can use this technique to make hidden blue screens appear for us:
1) Open your system control panel (Start->Control Panels->System).
2) Select the "Advanced" tab.
3) Click the "Startup and Recover" section's "Settings" button
4) Verify that under "System Failure" the "Automatically restart" checkbox is not checked.
love, b

ITouch stuck in recovery mode after iTunes and firmware upgrades

my iTouch has hung in recovery mode and will not restore after I updated to iTunes 7.7.1.11 and tried to update the firmware suggested on iTunes Summary screen after launching the new iTunes. The firmware I was at was 1.1.4 and iTunes was offering the update to 1.1.5. Now the iTouch is stuck.
i have tried the restore function, removed/reinstalled all Apple software, the iTouch resetting procedure (hold power & home buttons together), NOTHING WORKS.
HELP
Thanks,
nitefisher

I am having problems similar to this. After the ITUNES 7.7.1 upgrade and the ITOUCH 2.0.1 upgrade, ITUNES thinks the ITOUCH is is recovery mode and it must be restored. If you use the ITOUCH it works fine. I have recovered at least 10 times over the last 2 days. The ITUNES syncs sometimes and says restore is necessary sometimes. Various other errors pop up too. "The Ipod could not be restored. An unknown error occurred(6)" is just one of the errors. I wish I could back out the software because the hardware is fine. I suspect bugs in ITUNES. It's bad enough you have to pay for the ITOUCH upgrades but they have errors in them too. I've read numerous variations of this in the last 7 days with no clear fixes. Even the problems I am having are not consistant. If anyone has a clue let me know. Thanks.

Can't print after 10.6.8 upgrade.

iMac. HP Photosmart C4680. It will spit out one page (last numerically) before pausing the job.

Hello Bob,
Some actions that may help to get you printing again. Try the first and if that doesn't work, the second and so forth.
Restart your Mac
Remove the existing print queue and add it again.
Repair disk permissions
Reset the printing system
Note that resetting the printing system will remove all print queues from Print & Fax. So if you have another printer and/or scanner listed in Print & Fax, then this will also be removed. But it will not delete the printer drivers, so you will only need to add the print queues again via Print & Fax.
How to Reset the Printing System
1. Open System Preferences > Print & Fax
2. Move your mouse over the Printers list
3. Hold down the Control button and click the mouse
4. Click the "Reset printing system ..." popup
5. Restart your Mac

ITunes and QuickTime stopped working after an upgrade...

I have been pulling my hair out trying to get my iTunes working again. Here is what I have done already in order:
1. Does not work regardless of user (http://docs.info.apple.com/article.html?artnum=302856)
2. Tried running with changes to MSCONFIG
- Ran according to Apple Support Web Site (http://docs.info.apple.com/article.html?artnum=302538)
- Ran in Diagnostics mode
- Ran in /SAFEMODE
3. Uninstalled and removed from any reference from registry
4. Removed iTunes configuration files (http://docs.info.apple.com/article.html?artnum=302386)
5. Installed WinInspector Spy and launched iTunes to see what happened. Unfortunately I have not figured out how to copy and paste the log, but it shows the iTunes window class being created, a bunch of other stuff, then the OfficeWatson class, stuff and then the infamous "iTunes has encountered a problem and needs to close" message. After hitting the Send Error Report, I see the OfficeWatson window being destroyed and that is it. This leads me to believe that the problem is somehow with the outlook integration between iTunes and Windows? So I looked in my Add/Remove programs and sure enough Office and Outlook were upgraded the day after the last time i was able to use iTunes. So I tried uninstalling Office, iTunes and QuickTime. QuickTime refused to uninstalled claiming a fatal error. I then forcably removed it as described in the apple knowledge paper. Another interesting point, when I ran QuickTime, nothing happens, not even a crash message. When I run QuickTime Preferences from the system tray, the dialog shows, but when I click on the FileTypes tab, I get a RUNDLL error: "An exception occurred while trying to run "Shell32.dll, Control_RunDLL "C:\Program Files\QuickTime\QTSystem\QuickTime.cpl".
I also tried running StraceNtX.exe against it, but it doesnt create the right environment for iTunes (it thinks it is Windows 2000 and does have the right service pack).
PLEASE can someone help? This is the second time this has happened to me. The first time was on another computer that came with a "real" restore point (not the stupid one Windows has that does not work) and I solved it by simply restoring back in time. This time I do not have that option!
ARGH - I really do not want to have to use Media Player.
Is there a way to force a stack trace? I am a UNIX programmer and not familiar with Windoze.
Bryan
DELL Latitude 820, Intel Core 2 Duo, 4GB Ram

It sounds as though things have got pretty screwed up. If you couldn't clean things up properly with the MS installer cleaup, there is thread on cleaning up uninstall information in the registry.
http://discussions.apple.com/thread.jspa?messageID=3637190&#3637190
I am not sure that I have anything more to offer as you appear to have done most things. Have you tried turning off all security software while doing the install, and doing the MSconfig thing with just Quicktime. Presumably your system is free of malware?
As a matter of interst, what happens if you have the task manager running when you start Quicktime, does it start and then stop, or keep running or not start at all?
A few people seem to have these intractable problems and the forum expert on this has been away since christmas, but you could try searching the forum for "b noir" posts about install/launch problems.

Some videos are not showing in Apple TV playlist after upgrade to 6.0. Can play on Macbook itunes and using airplay to Apple TV. Anybody else have this issue?

Some videos are not showing in my Apple TV playlists after upgrade to 6.0. They were there prior to upgrade and I can play on Macbook itunes and also using using airplay to Apple TV. Anybody else have this issue?

Ok, so I'll try again. Thank you for the idea of looking in Home Videos, which is where all my "lost" videos are listed.
Is there a way to get them to display under their appropriate genre in the Movie section, which is where they all were listed prior to the os6 update? It does me no good to have hundreds of movies categorized in iTunes via a genre only to have them appear in Home Videos on ATV. These are not "home movies." They are legit mp4 movies that worked great under v5.

Applications won't open after update to iTunes and QuickTime

I just allowed a software update for iTunes and QuickTime. After rebooting, I found that the Finder will not start, nor Mail nor most other applications. TextEdit will start, which gives me the Menu bar so I can switch users, but all users have the same problem.
I cannot see the hard drive icon without the Finder. If I hit the Finder button, it wiggles and then dies. Safari starts, but "quits unexpectedly" when I try to browse with it.
I bought the G5 with 10.2 installed, then upgraded to 10.3 I have the 10.3 upgrade disks, but don't know if I can use these to do an archive and re-install.
I can see the hard drive by doing an "open" from TextEdit, but of course I can't use that to open another application. I've booted of the 10.3 upgrade disk and used Disk Repair, but it found no problems. Lots of permissions problems, but I doubt that is causing the trouble.
I'm in a real fix here. Any suggestions?
Thanks,
Ray
G5 Mac OS X (10.3.9) )
G5 Mac OS X (10.3.9)

I'm having a similar problem only with disk utility after updating iTunes and Quicktime. I am unable to repair permissions, but otherwise the machine is working great as before. When I try to repair permissions using either Cocktail or Onyx it just keeps going, going, going and going but never finishes. It will run for several hours before I have to force quit the application. Repairing permissions has never taken more than 15 minutes prior to this update.
I decided to try using disk utility while booted to osx, I get a message that says communication between the disk managment tool and disk utility has been lost and operation cannot continue. The same error occurs when running disk utility off the startup cd. I restored using my backup then ran disk utility and all was okay using all of the methods mentioned above. I installed the updates again and the same problem occurs when trying to repair permissions.
Guess I will reload my backup and wait for a fix from apple unless someone chimes in with ideas on what could be wrong. Thank goodness for backups!!! This is the first software update that has given me any problems. Oh, one other thing. I installed the updates on my titanium powerbook running 10.3.9 and didn't have any problems. The setup on my tibook is essentially the same as my powermac G4. What gives? Anyone else having problems after installing the updates?

Exception processing message 0xc0000013 after updating itunes and Quicktime

After updating itunes and Quicktime, every time I remove a CD from my DVD drives I get an error saying no disk exception processing message 0xc0000013 Parameters 0x759f023c 0x87f51934 0x759f023c 0x759f023c.
I tried doing a restore to a time before that update and that didn't seem to help. It just gave me different parameters.
I'm using Windows Vista and this is driving me nuts.
Any help would be greatly appreciated.

I also have the same problems as you guys after installing Corel Painshop Pro X12. I went into the task list and stop the CorelIOMonitor process and then the problem went away. I found out that you can disable this from starting up using System Configuration tool via Start -> Run -> msconfig
. It's an interm solution untell they fix it. Maybe someone needs to notify Corel or Apple to fix this problem.

After I downloaded the most recent versions of itunes and quicktime I cannot play any videos, tutorials. Thank you for any help.

Videos will not play after downloading the mmost recent versions of Itunes and Quicktime. What can I do? The video tries to start but freezes and does not respond.

Appreciate the suggestion. I did the repair, but videos still don't play.
I tried putting quicktime in "safe mode", but that also did not solve the video-play problem.
However, I downloaded a video and that video does play.
A video may start but quickly freezes.
In itunes is the player "quicktime or itunes"?
When I open the quicktime player(its appearance doesn't look like a player with controls for play, pause, etc.).
Maybe the controls appear when play begins' however, then I try to open any song of video, I always get the same message: "Do you want to allow this website to open a program on your computer(in itunes, I assume).)
If i choose "yes" I get an error message.
I thought this additional information might be helpful, but you can just answer the original question if you have some additional ideas.
Thanks for your help.

Upgraded iTunes and Quicktime now whole puter not working

I just upgraded iTunes and Quicktime for OSX 10.4, now after a restart i finder just keeps flashing, on and off and i cant open anything. Need help to fix or go bak to old versions?

thanks sarah, but the disk didnt work. i get to verifying my main drive and it comes back with:
First Aid Failed
Disk Utility stopped verifying "***" because the following error was encountered:
The underlying task reported failure on exit
and in the first aid window it says:
Volume Bit Map needs minor repair
Checking volume **** needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
I try to repair disk anyway but says the same thing on trying to do that?? any suggestions anyone?
Could i get the update for 10.4.8 and put on a disk to upgrade the OS from booting from the CD or from terminal mode? Does anyone think this could fix the prob?

Powerbook can't start after itunes/quicktime update

Leopoard was running fine up till now. I just ran the software update for itunes and quicktime, and now my powerbook g4 is stuck in an endless loop of trying to boot--I get to the apple logo and spinning gears but after a bit it just shuts down and starts over.
Any ideas?
Thanks!

For those of you with this problem . . . here is another solution that worked for me.
Go here and with a very simple change you can get up an running in Leopard again! Follow the instructions in the 7th post down . . . don't worry . . . you don't really have to do any terminal work. From that post . . . " Apparently there is a conflict with a folder called DivXNetworks in the Library/Application Support folder. If you change the name of this folder to DivXNetworks.prev it may solve the problem. It did in my case. I must say that I do not know what affect the change to that folder will create - but so far I have not noticed any issues"
http://discussions.apple.com/thread.jspa?messageID=5755930&#5755930

ITunes and Quicktime Error after automatice Apple update, need help!!!

So I currently have a new labtop with windows vista. I have been runining iTunes for the pass 3 months already no problems. The Apple automatic update has never caused any problems till now. Quicktime needed to be updated today, and I accecpted the update, prior to that iTunes and Quicktime was working properly. Once the quicktime update was complete, it restarted my computer like usual. Then when I tried to open iTunes this error came up:
"iTunes cannot run because it has detected a problem with your audio configuration"
Now I checked the audio configuration and nothing was changed or anything, that has not been touched at all, so I still think it had to do with the update. The next error was came up when I tried to open Quicktime and it read:
"Runtime Error!
Program C://ProgramFiles/QuickTime/QuickTimePlayer.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information"
So as long as I have been using Quicktime and iTunes I have never encountered this, I tried to re-install but the error kept coming up after it was installed. Please help me out!

try doing following the steps in these articles
http://docs.info.apple.com/article.html?artnum=31115
and
http://docs.info.apple.com/article.html?artnum=93976
hope this helps

Hp photosmart premium wireless C309 can't print after updating to IE 9 and i think java script

hp photosmart premium wireless C309 can't print after updating to IE 9 and i think java script. I am a realtor working from home and inorder to use the forms it required I update to IE9 and I think java, this is the link. http://www.car.org/tools/zipform6/ After doing so my printer does not work. I tried to go on line and reinstall from a link on line but it did not work. I don't know what to delete and what to add and how to get the " HP sSolution center" to work again. the printer was already poor performance from day one. Always having to unplug and restart and the black ink always runs out too quick. but right now my concern is just being able to print and scan. I am in the middle of a deal and can not communicate with all parties effectively. please help

What error messages are you getting?
What OS are you using?
How is the printer connected to the computer?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Can't print after iTunes and Quicktime upgrade

Similar Messages

Maybe you are looking for