Can't Print Book from iPhoto or Preview, but Can Print from Adobe Accrobat
I have spent 2.5 hours on the phone with HP, an am now unsure if the problem is with HP or Apple.
When I try to print a single page from an iPhoto Book (or a group of pages), I receive an error message on the HP 4650 printer (49.4C02). I saved the book as a PDF and tried to print from Preview with the same results. I then opened the PDF file in Adobe Acrobat and WAS able to print. I am able to print individual photos from iPhoto.
I searched this discussion board for problems printing to the HP 4650. One suggestion was to use the driver for the HP 4600. I tired that and it produced the same error on the printer.
Using Adobe Acrobat is a viable work-a-round, but I am curious why I cannot print a book from iPhoto. Any thoughts as to why Adobe Acrobat works and iPhoto and Preview do not?
Thanks,
-Dale
HP has _ a firmware release that addresses this error _ - have you installed it?
LN
Message was edited by: LarryHN
Similar Messages
-
How can I copy a photo from iphoto to PReview to make it smaller for uploading to a site that requires a smaller image?
I don't think you need Preview.
Select the image and use File->export and you have full control over the size and compression. -
Can I do a clean install of Lion, onto my Mac Book Pro4,1, that is currently running 10.5.8? I have seen U-tube videos on how to do a clean install to Snow Leopard, and another from SL to Lion, but can zero out my HD, and do a clean install to Lion?
See this article.
-
My photos shrink in size when emailed from IPHOTO or attached - How can I fix this. My friends say they can't see my pictures... thanks!!
When you email from iPhoto, you have a choice as to the size of the picture - choose medium and your friends will be able to see them. By the way, do your friends click on the photo attachment in the mail to open it?
-
When downloading a pdf and using the print command, it shows the correct document in the preview but only prints blank pages. If I use the save command and try to open with Acrobat 11.0.07, it says it wasn't correctly decoded and can't open it. If I do the same thing on my old Macbook (10.6.8) all works fine from the same website with the same document. Any ideas?
DThis article maybe help to you, change pdf file type to other application like adobe reader, See:
* https://support.mozilla.com/en-US/kb/Managing%20file%20types -
I have connected my ipad to my computer and itunes can't see it. iphoto sees it, but not itunes. I want to sync - what can I do?
You can redownlod iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
For other music you will have to get it from where yo originally obtained it. -
Correct preview, but wrong print out.
Hi all,
I created a new page format of size 255MMX205MM .Also created a format type with the same name.Copied the device type SAPWIN and added the new format created .Now the smartform that i created(using the new page) is all right in the print preview but the printer is printing only the A4 area (ie. skipping alot of space in the next page). What could be the reason ?The printer i am using is dot matrix(Lipi TallyGENICOM 6312 ). Eagerly waiting for respone. Thanx in advance.Hi,
With windows device types like SAPWIN and a custom pageformat like e.g. Zxxxxx, there is no command sent to the Windows to
select the page format, so the default Windows page format is used.
As a solution, you can set a default page format in Windows. In thiscase, then you must set up the Windows default page format to match the paper size you require as described in the SAP Note 163136.
Regards,
Aidan -
Cannot send emails from my new ipad but can receive them. iPhone 5 ok. Both iOS 6
Can't send emails from my new ipad but can receive them. I've checked the settings and username and password are setup correctly. My email account is with tiscali. My iPhone 5 is setup the same but works ok.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
How do I get my music onto icloud from my ipad? I can see i have plenty of icloud storage but can't get my music to store on icloud hence taking up lots of storage on my ipad
If you want to be able to access your entire music library from iCloud, you'll have to subscribe to iTunes Match (http://www.apple.com/itunes/itunes-match/). Music purchased from the iTunes store is already in iCloud as it can be redownloaded at any time (see http://support.apple.com/kb/ht2519).
-
I lost an xcel doc a couple of days ago. Tried to find the Library folder in Users but not there when I use Finder (even when I do shift-command-G). But when trying to upload a photo in iphoto I found the library folder in Users. I can see my doc in Office 2011 Autorecovery, but can't access it! How do I get User to show Library then I can get to my long lost document?
The auto recovery dat should be in the Microsoft User Data folder in your documents folder, not in the Library. However, I Haven't had to look recently.
-
I'm trying to hi-light objects and text in a pdf converted from a cadd drawing but can't do either?
Hi blueteam,
Please check :http://www.wikihow.com/Highlight-Text-in-a-PDF-Document
Regards,
Rave -
I created a brochure in pages and exported it to a pdf format. The pdf looks and opens perfectly using preview but when opened in adobe reader (which my printer uses), fonts look odd, transparencies don't display...etc. Tells me error exists on page?
Does this essentially mean there is no way to fix this problem on my end? It's a pity because the design and branding of my brochure will suffer if I remove transparencies and use different fonts. It also concerns me moving forward because it means the quality of print on my pieces will be significantly lower because most commercial printers use Adobe products.
-
BARCODE PREVIEWING BUT NOT PRINTING
Hi GURUS / EXPERTS;
I have created a SAP SCRIPT FORM and Driver program for BARCODE Printing. Now my problem is that the
BARCODE is appearing on screen (Preview), but when print system print numbers instead of BARCODE.
Steps carried out: IN SE73: Create a SYSTEM BARCODE WITH NEW TECHNOLOGY, check the preview, it is OK.
IN SE73: SAP SCRIPT FONT MAINTENANCE: Defined the prefix & Suffix (SBP26 & SBS02) for that BARCODE & DEVICE.
IN SE71: created a character (BC) reich check the check box (Selection) and select the barcode.
Use that character in script as <BC> &T_BAR-CHARG&</>
in SE38: use the driver program to call the script form: IT DISPLAY THE BARCODE, BUT WHEN GIVE THE PRINT- PRINTING THE NUMBER. 123456 - Where 123456 is the value of T_BAR-CHARG.
Please help. or suggest where I am wrong.
Thanks in advance.
DSC.Hi,
It is correvt that the new barcode technology is only supported via smartforms, see SAP Note #645158.
With sapscript, your printer must have barocde fonts installed.(see SAP note 45643)
Another solution is to print via a Windows system with a windows device type like SAPWIN or SWINCF and a barcode.dll.(see SAP note #14561)
Regards,
Aidan -
I can receive emails from three different accounts but can't send a photo from them. It says the server doesn't allow relaying???
I have a hard time describing this exactly, so I copied this from another thread. This seems to be a recent issue with AOL email accounts on the iPad the past few days. I have two AOL accounts and they work fine. See if this works for you.
+If you cannot send, under the smtp server your user name and password must be entered even though the prompt tells you it is optional. As a mobile device the port used is different from the one I would normally use if at home and therefore validation is required by use of the password. The normal port for the smtp server is 110 but to use on a mobile unit like the iPad port 587 is used.+
The big thing is to make sure that your username and password are filled in - Select your email account in the Mail setting and tap on the arrow next to the smtp server under the Outgoing Mail Server and then tap on the arrow next to smtp server under the Primary Server and fill in the information in there.
Some times you have to resort to deleting the account and starting over again. -
I can not tex one person in my iphone but can recieve tex,s from them and i can phone them any ideas please?
Could be an issue with your carrier. Have you contacted them?
Maybe you are looking for
-
I used to be able to open a new tab using Ctrl+T but that has stopped working. Having I accidentally changed something?
-
Essbase 9 Certification : Need Information
I am planning to take the Essbase System 9 Certification - Developer. Kindly send me the links for: - Registering - Study Material Note: searched a lot but could not find much. Regards, Parag
-
How do you call a java class from the main method in another class?
Hi all, How do you call a java class from the main() method in another class? Assuming the two class are in the same package. Thanks SI Edited by: okun on May 16, 2010 8:40 PM Edited by: okun on May 16, 2010 8:41 PM Edited by: okun on May 16, 2010 8:
-
Is there a way to speed up the proces of migration Hyperion Performance Suite 8.3.2 to Interactive reporting 9.3.1? What I tried and what helped was: SQL repository transfer has been improved by copying (select into the old db tables to the new repos
-
VA01 Transaction variant Field Modification
Hi All, I need to deactivate ( make input = 0 ) certain fields in VA01 txn which has a transaction / screen variant. Everything thing works fine but the problem is, the other fields which was deactivated (make input = 0 ) using transaction variant ap