Can't print even or odd numbered pages

No matter I choose "even numbered page" or "odd numbered page" in the printer setting,
it just print out all pages without differences.
I tried two different printer, hp Laserjet 1300 & Epson stylus C68, and got the same result.
However, printing even/odd numbered pages works fine in Tiger.
Does anybody have the same problem?

sonic64 wrote:
My friend told me that his Lexmark printer works fine in printing even/odd numbered pages on Leopard.
However, his printer is directly connected to Airport Express.
It seems that Gutenprint drivers may not be fully compatible with Leopard.
That anecdotal experience is good, but it does not further trying to find an answer for your situation. I have had no problems with printing odd or even pages using the Gutenprint drivers with my HP DeskJet 870. That is why I asked if you could connect one of the printers directly to your Mac running Leopard and see if the Gutenprint drivers behave correctly. The goal is to find out whether it is the Gutenprint drivers, something about printing to a shared Windows printer, or something else that is causing this behavior.
You might also want to try the hpijs drivers for the LaserJet 1300 to see if they are able to print odd or even pages. That also would be of help in determining where the problem is. http://www.linux-foundation.org/en/OpenPrinting/MacOSX/hpijs
Matt

Similar Messages

When printing a PDF file I would like to ensure that all 'chapters' print on the odd numbered pages.

I need a way to set up a PDF file so that when I print it all new chapters (and single sided forms) print on the odd pages. These PDFs are available for viewing on the network but occasionally there is a demand to print one of them. Is there a 'chapter start' (or similar command) which will allow the PDF to more properly format when printing.

There's no automated process because I don't think Acrobat could determine what was the beginning of a chapter. However, you can insert blank pages that start the first page of chapters to an odd-numbered page.
In Acrobat XI, that is Tools > Pages > More Insert Options > Insert Blank Page

How do I insert a blank page if my group ends on an odd-numbered page

I have a report that prints out information for 10 regions. We print this report double-sided and put it into a 3-ring binder with 10 divider tabs, one for each region. If the last page for a particular region is an even-numbered page, then everything is OK since the next region begins on an odd-numbered page (the right-hand side of the open 3-ring binder). However, if the last page is an odd-numbered page, this causes the next region to begin on what would be the left-hand side of the open 3-ring binder which is not acceptable. I have considered printing each of the 10 regions separately (a seemingly easy solution, but our pages are required to be numbered consecutively through the regions - and are also of the type Page &Page of &Total_Pages).
How do I create a BLANK PAGE at the end of a region if it ends on an odd-numbered page?
I am using reports version 6i with 9i as my backend database. It just occurred to me that occasionally in printed material, one sees "This page intentionally left blank", usually on the last page of a chapter to permit the following chapter to begin on the right-hand side. If anyone has created a solution to get this "..intentionally left blank" page to print, this seems to be a close fit to what I am trying to do.

I am also trying to do this same thing.
I have followed the text as it is stated in
http://otn.oracle.com/products/reports/htdocs/faq9i.htm#43
but it still does not work.
My invisible line prints on every other page, however
my repeating frame prints on every page with no page breaks.
Do you have any suggestions?
Thanks in advance,
Vicki

How can I print address labels from numbers spread sheet

How can I print address labels from numbers spread sheet

CAB,
The 5163 template has the following dimensional specs:
Dimensions & Info
Length: 4.00000"          Height: 2.00000"
Top Margin: 0.50000"          Bottom Margin: 0.50000"
Left Margin: 0.18000"          Right Margin: 0.18000"
Hor. Spacing (gutter): 0.14000"          Vert. Spacing (gutter): 0.00000"
Intended Use: Mailing Labels, Shipping Labels, Address Labels
There's a great vendor site with this data readily available, better than the Avery site in my opinion. But, you can get the same info in the Contacts Print dialog pane.
You can grab a template matching these dimensions from that vendor site, Copy the table after opening the Word Template in Pages and drop the into a blank Numbers Sheet.
I found that Sheet side margins of 0.15" worked better than 0.18. For some reason the table wanted to flow to the next page to the right with 0.18". Turning off the Headers and Footers and setting Top and Bottom Margins to 0.5" worked well. These adjustments are made in the Sheets Inspector.
So, that will put the template you specified into a Numbers document and you can print labels properly aligned from there. Since your problem statement is a bit lacking in detail, that's all I can offer you at this point.
Jerry

How do you force a section to begin on an odd-numbered page?

I would like to be able to format sections in my Pages document to automatically begin on odd-numbered pages.
In this manner, each chapter of my document will begin on a right-hand page regardless of where the previous chapter ended.
Yes, this has the possibility of having blank pages in the final document, but this is a common practice in many publications.
Yes, I can insert additional page breaks to get the sections to begin on odd-numbered pages, but this technique requires that the document be checked and double-checked to be certain that each section begins on an odd-numbered page. Further, each time any editing is done, the document must be rechecked to assure that the correct number of page breaks have been inserted between each section.
The goal is to have this done automatically so that each section begins on an odd-numbered page without any further intervention on my part.
I'm trying to make the shift from MicroSucks Word to Pages and am struggling with some of the finer details. I have used MicroSucks Office products since version 1 and know them inside and out. As a dedicated Mac user, I figured it was about time I made the switch.

From the Layout inspector, at the bottom of the Section tab choose
Section starts on: Right Page

Error Message: "Before you can perform print-related tasks such as page setup or printing a document

Hi,
I got the next error message for a pdf document: “Before you can perform print-related tasks such as page setup or printing a document, you need to install a printer"
Info:
- version: 10.1.3
- Default printer: Epson SX110 Series
- Document: Security properties: Printing allowed - all other security properties: not allowed
- Same document without security, does print without any problems.
thanks for quick solution

Hi,
My printer is correctly installed. I can print other pdf documents without any problem (even the same document if the security settings are not set).
best regards
Alec

How can I print an envelope from a Pages document ?

How can I print an envelope from a Pages document?

Not from a document, but there are envelope templates in Pages you can use.

How can I print sheet titles from Numbers?

how can I print sheet titles from Numbers?

Hi Rick,
"Believe it or not, Numbers just doesn't work as well for me as Excel."
I don't find that difficult to believe. If you need the functions supported by Excel and not by Numbers, then Excel is the tool to use. OTOH, your finding of 'more flexible' translates, at least in part to 'more familiar.' All applications, Excel included, force you into certain paths.
Regards,
Barry

How can I print a file with mixed page orientation in windows 8.1?

I have a win 7 and a win 8.1 computer. I have a file which contains both landscape and portrait pages. The file prints correctly with the mixed orientation from the win 7 pc, but will only print with either landscape or portrait on the win 8.1 pc.
I am using Adobe reader XI on the win 7 pc and adobe touch on the win 8.1 pc

ส่งจาก จดหมายของ Windows
จาก: Pat Willener
ส่งเมื่อ: จ. 5 มกราคม 2558 6:15
ถึง: thang dinhvan
How can I print a file with mixed page orientation in windows 8.1?
reply from Pat Willener in Adobe Reader Touch for Windows 8 - View the full discussion
I have a win 7 and a win 8.1 computer. I have a file which contains both landscape and portrait pages. The file prints correctly with the mixed orientation from the win 7 pc, but will only print with either landscape or portrait on the win 8.1 pc.
I am using Adobe reader XI on the win 7 pc and adobe touch on the win 8.1 pc
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7064031#7064031 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7064031#7064031
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Reader Touch for Windows 8 by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Before you can perform print-related tasks such as page setup - Internet Explorer 8

I understand there have been similar threads on this but they all related to printing directly out of Acrobat reader rather than a browser.
On some machines when printing a PDF from within Internet Explorer the error "before you can perform print-related tasks such as page setup" is displayed and users are unable to print. I have removed printers, changed the default printer none of which have worked. If you change Acrobat reader to not display PDFs in Internet Explorer printing works fine.
System Information
Windows 7 Enterprise
Acrobat Reader 9.3.0
Internet Explorer 8
Any information regarding this would be appreciated.
Cheers
Jason

This works in Photoshop cs4: SOLUTION!!! I get the same msg... "before you can perform..." etc. on some images that I've printed before but not on others. I haven't found the cause, but here's an easy WORKAROUND: Open your file, Select All, Copy, File>new, paste... and print away!!!

Anyone know how to select only even or odd numbered files in lightroom?

Anyone know how to select only even or odd numbered files in lightroom? I need to reduce the quantity of images in my timelapse sequence and this would help me greatly since there are 8250 images and doing this maually would be tediuos and make me want to kill myself.... : )

Do this.
If they are jpegs, use .jpg instead of CR2
Be sure to save this as a preset, as you WILL need it again. Mine is named "select even CR2", that is why it says that in the upper right.

Zero bleed at inside page on even and odd master pages

Hello guys! Going directly to my question would be how to apply bleed option specifically on inside pages when working with individual master pages for master and facing pages on the main document. The thing is when I've set no bleed on inside on my Document Setup it has applied on my even and odd master pages (remembering I have individual master pages set on my document). I am not sure if I was clear enough but I keep it open for eventual comments and so on. Thank you.

Ok Peter. Thank you! I am posting some screen shots to help understanding.

Can you print four months to a page in iCal?

Can you print four months to a page in iCal?

Yes.
From any application you can print multiple pages on a single page. In the Print Dialog click on Copies & Pages to open up the drop down menu, then select Layout.
iCal defaults to one month per page, so select the 4 pages to a page Layout to get what you want.
Does that answer your question?
G3 DT/SonnetEncoreZIFG4/1GHz/768MB/WingsAV/DVR-106D/psc750xi/graphire4-6x8 Mac OS X (10.4.8) TempoUltraATA66/120GB Maxtor/120GB Seagate;TangoUSB/FW;ATI9200/204B/172N

Can't print: "Before you can perform print-related tasks such as page setup or printing a document,

Hello,
I have searched these forums but have not found a solution to my problem.
I recently purchased an IOGear USB Print Server (print server only, not USB device server). I was having issues installing and followed a Microsoft support document to try and resolve the issue. It had me remove some entries from the registry.
Hours later, I was able to get the printer installed and working, but I do not know if it was a result of the registry tweak. But now that it has been installed, I cannot get anything to print from Acrobat Reader (I have tried 7.0 and 8.1.1). I get the following error message:
"Before you can perform print-related tasks such as page setup or printing a document, you need to install a printer."
Is there something I should check in the registry to make sure that it will work? I do know for sure that it was working when it was just the printer and drivers installed, it only happened after running the print server setup. I have already tried removing the printers and drivers from the system.
Thanks,
Braden

I have a problem similar to those posted here, with one difference. With my printers newly installed, regardless of which one is selected as the default, when I try to print from Adobe Reader I receive the error message we're talking about : "Before you can perform a print related task...."
Here's the fun part.
If I click OK on the message, ALL MY PRINTERS GET DELETED and, I get the windows message that "Spooler subsystem app has encountered a problem and needs to close"! If instead of clicking OK I switch to Task Manager and end Adobe, I'm fine and can print from other programs.
I can "reset" the problem by deleting the files in C:\Windows\System32\Spool\Printers and C:\Windows\System32\Spool\Drivers\w32x86, restarting the machine, and deleting then reinstalling the printers (which show up again after the restart).
BUT, if I try to print from Adobe Reader again, I get the same cycle of problems.
I am running Windows Vista and Adobe Reader 8.1

I can't get my documents on Numbers, pages, and keynote to print on a wifi printer without airprint. Any suggestions?

How would I go about making my documents in Numbers, Pages, and Keynote print on a printer that is not airprint compatable?

Either get a air printer that works with this feature or use iCloud or email. Email it to an email and print it off from a computer. Or option 2- if you have your ICloud setup, go to iCloud.com. Hit iWork. Your documents will be there to print off.

Can't print even or odd numbered pages

Similar Messages

Maybe you are looking for