Can't print from 2nd tray

My printer has a 2nd tray for photo paper. How do I get iPhoto to print from that tray to print out photos at home?

printer specific options (like paper source if it is supported on your printer) are on the final print window - if there are not there click on the little grey triangle to the right of the printer name to open the full window up
LN

Similar Messages

  • In adobe reader, I can't print from different trays?

    Using Adobe Reader, I can't print from different trays on my Lexmark x954 printer.  I've tried reinstalling the print driver (latest version) and reinstalling Adobe Reader with no luck.  I can see the trays and even select them in the print dialog box in adobe but when I print I am unable to print from the correct trays.  It always prints from tray 3 of my printer no matter what tray and type of paper I choose in adobe.  Any suggestions?
    I've also noticed a problem printing through Preview.  I can select different trays using preview but the print time is extremely slow.  It seems like it has to re-download the pdf page each time it goes to print.  So a 100 page print job takes 20-30 minutes to complete which means other have to wait for my job to complete so it really slows our office down.
    Thanks for your help.  Also, I am using the mountain lion operating system.  Thanks again! 

    Don't know whether it will make any difference, but a new version of Adobe Reader has just been released:
    http://www.macupdate.com/app/mac/73/adobe-reader  (version 11.0.03).

  • Can't print from photo tray and can't set my usual margins

    I have a Photosmar tD7560 printer.  My computer is an HP Pavillion e9120y PC, recently upgraded from Vista Home Premium 64 bit to Windows 7 home premium 64 bit (clean install). The printer was not compatible with Windows 7 but the issue was resolved here when I was advised by a member to download a fix.  (Thanks again!)
      I have printed with no problem until today when I tried to print out a 4x6 index card from the photo tray.  I set the paper size to 4x6 but when I tried to print it, i got an out of paper message. I put paper in the main tray and it printed from there.
    Also, suddenly I cannot reset my bottom margin to .5 inches, it must be.59 or greater.  This happened after I tried to print from the photo tray because before, I was able to set a .5 inch margin.  (This is in Word 2003)
    I hope someone can help with this!

    Hello AnnArritola,
    Welcome to the HP Forums! The HP Officejet 5745 printer defaults to the main paper try. Printing using the printer’s dedicated photo tray can be accomplished by accessing the print driver and selecting the photo tray before printing. Below is a support document that should help with the necessary steps.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04392289&tmp_task=useCategory&cc=us&dlc=en&lang...
    Regards,
    Steve_S_HP
    p.s. A quicker method once you’re in the printer driver is to go to the shortcuts tab and select photo printing (this will automatically select the dedicated photo tray).
    I am a HP Employee.

  • HP P2055 (network) - Can't print from trays automatically

    Hi all,
    Have a problem with a HP P2055 (networked) printer. We have the addional tray on it, so it has 3 trays in total. It won't print from any tray except the 1st (bypass) tray. Any print job that is sent through to the printer automatically moves to the 1st (bypass tray) and it requires the user to press the "OK" button on the printer to start the job. The job will not start automatically.
    This is causing us a massive headache, as a lot of the MS Word letter templates our users want to print have been configured to print the 1st page from tray 2 (filled with headed paper) and the subsequent pages from tray 3. This works on all our other printers but not this one - where are we going wrong?! 
    Many thanks for any help
    Kev

    Hi Shellshokd,
    Try using the HP Universal Printer Driver which supports a wide set of printers. 
    The driver is available at this location.
    http://www8.hp.com/us/en/solutions/business-solutions/printingsolutions/upd.html
    Also, just to let you know ePrint also supports some other formats apart from PDF. You can mail doc, docx, xls, xlsx, ppt, pptx, txt, html, jpeg, jpg, png, bmp, gif and tiff files directly to your printers email ID. 
    I hope this helps.
    Regards,
    Oliver
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"--Please mark the post that solves your problem as "Accepted Solution"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.

  • How can I print from my windows 8 pc to my printer using my 2nd g express?

    I have an hp deskjet 1055. It's just a USB printer how can I print from windows to my printer connected to my 2gen airport express? If it only works with airprint printers than why is there belkin routers that can work with any printer?

    Figured it out. To print wirelessly via airport express 2nd generation you have to do some things. Download the bonjour printer thing mentioned above and have the printer plugged in to the airport express. Then run the bonjour printer thing and select your connected printer and install. Where I went wrong was I tried to print from my hp printer (1). When you install a printer with bonjour to print wirelessly it installs the same printer (2) so it's like there's 2 different printers in word or whatever you use to print.  You have to select the one that says ready. Thanks for everyone's help

  • How can I print from my MacBook Pro to Canon MP560 using rear tray?  I can't find that "option" in the print selection possibilities.

    How can I print from my MacBook Pro to Canon MP560 using rear tray?  I can't find that "option" in the print selection possibilities.

    Sure can.
    With a document open in Pages, select to print so that you can see the print dialog as shown below.
    Note that to see this view, you may need to press the Show Details button in the bottom left corner. In the image above, since I have the expanded view displayed, this button changes to Hide Details
    So with the view shown, first change the Presets menu to Default Settings. Then click the Layout drop menu and select Quality & Media. Make the changes you want and then click on the Presets menu and select Save Current Settings as Preset...
    At the next window, give the Preset a name and select the Only this Printer radio button and then click OK to save it. That's it.
    As for the Preset that you already have, if you no longer want this preset then you can delete it via the Show Presets menu pane that you've used already.

  • Can't print from Intel Mac w/Snow Leopard to HP 2600

    Can't print from Intel Mac w/Snow Leopard to HP 2600.  Upgraded from OS 10.4 and printer showed on printer list along with an Epson scanner. but continually shows printer as offline.  I finally deleted the HP Color Laserjet 2600n from the printer list.  When I attempted to re-install it, it doesn't find the printer at all.  I haven't attempted to use the scanner.  I also went to HP and downloaded the driver, no luck.  I've restarted the computer multiple times, tried it with the printer on, and printer off, as well as pulled the usb cable in and out both ends.  No error message on the printer display and it gpes through normal warmup until it shows the green light.  I run software update and it shows no updates needed.  Help!

    Go down a few more posts to the question about the C7180. Answer:
    "Re: iPhoto 08 + HP Photosmart C7180
    Posted: Aug 19, 2007 1:26 PM in response to: Daniel_D
    When you press print the first window is pretty basic.
    When you select print on that the next window should have an advanced option.
    Click that and see if any of the options in the 3rd dropdown box allow you to specify the 'paper tray'.
    AC "
    In this new windaow, click "advanced", go to "paper type/quality" and choose " best" and a photo paper. Then you will be able to choose a paper source (photo tray).
    Once you have these settings, under presets do "save as", and you can choose the preset instead of going to advanced.
    If you have the latest software and drivers downloaded from HP, this will work.
    Scott

  • Where can I get a 2nd Tray for this HP 8600 PRO and how much? I am in Brisbane

    Where can I get a 2nd Tray for this HP 8600 PRO and how much? I am in Brisbane
    Thanks
    Ftcukoz

    Hi,
    The brochure says only available in the US or North America only:
       http://www.hp.com/hpinfo/newsroom/press_kits/2011/InnovationforImpact/OJ8600_Series_FeaturesGuide.pd...
    But you can order from the following shop:
       http://www.techbuy.com.au/p/186748/PRINT_ACCESSORIES_PAPER_TRAYS/HP/CN548A.asp
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP 8630 won't print from Paper Tray 2

    I decided to upgrade last week with the dual paper tray printer and continue to have to manually load my stationary in paper tray 1 to print on custom paper. 
    Why in the world can't HP fix this issue....I've been with Apple Care to do everything regarding repairs on their end of the line and reinstalled printer software following that process and it worked....ONCE. Now I cannot even get the Options Box to stay checked long enough to get ONE print from paper tray 2.
    I'm returning this POS today....unfortunately, I tossed the box after I mistakenly thought it was fix after the Apple Care exercise.
    HP....what is your problem that you can't resolve this issue?????

    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
    If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • 7515 keeps trying to print from photo tray when main tray selected (Mac)?

    Just started uing a iMac with the 7515.  It's driving me nuts that it keeps trying to print from the photo tray when I have main tray clearly selected in the print dialog box.
    I'm trying to insert the picture of the print dialog box, but doesn't seem to be working.  In presets (the second selection box from the top) I've got "Print from Main Tray" selected pretty plainly.
    Turning the printer on and off does not help.
    Any help appreciated.

    Hey Chriscic,
    Welcome to the HP Forums!
    Always the best recommend steps to start off with when troubleshooting with a Mac, is to reset the printing system. Then verify, and repair the disk permissions.
    So to start with the reset of the printing system, I have included the document 'Macintosh: Resetting the Printing System in Mac OS X'. Please select your version of Mac, and follow through the steps. If you have Mavericks, you can follow the steps for OS X v10.8. Also, please do not re-add the printer just yet.
    After the reset of the printing system, you will need to complete the verify, and repair of the disk permissions. I have included the document 'Disk Utility 12.x: Repair disk permissions'. For step three when it asks you to select a disk, please select your hard drive. Once the repair has completed, please restart the Mac.
    After the Mac has restarted, you can now add the printer back into the print queue. The try to print. Are you still experiencing the same issue? Or are you able to print from the main tray?
    If you do require further assistance, please let me know the version of Mac OS X you are running. If you need it, I have included the document 'Finding your OS X version and build information'.
    Looking forward to your reply.
    I worked on behalf of HP

  • New ImageClass LBP6780dn doesn't "see" paper in tray. Prints from side tray only.

    I purchased my LBP6780dn online and it is under warranty, but before calling the company I wanted to ask here, because maybe I am missing something - or doing something wrong.
    I have 1 paper tray filled up with paper, but when I send a document to the printer - it won't print because of "no paper".
    So I have the side tray opened and it only prints from there.
    Questions:
    Is there a sensor that I could access or "clean" maybe?

    Thank you for your reply
    The paper size is A4 and it is loaded in the bottom loader.
    Since it can't print from there - I always have some pages in the side opened tray.
    The printing problem was intermittent in the beginning.
    I initially didn't notice - it was like it would get stuck with this error "no paper" - I had to push few buttons and it would start printing without any further problems.
    So it did print from the bottom loader and I did not need to play with the side tray.
    I did not change anything since I bought the printer - even the paper is from the same package.
    (I do not print much - and it is my first paper pack I bougth)
    The printer page shows the following:
    Paper Information
    Paper Source
    Multi-Purpose Tray           Loaded                 LTR (LT)
    Drawer 1                            Loaded                  A4
    I did not set the paper size.
    Does the above mean I need to select A4 for both?
    How?
    Thanks,
    A

  • HP Envy 7645 won't print from photo tray

    FIXED my own problem!Never thought to try setting the paper size to 4x6 in/10x25 cm! That's apparently what I get for being metric-phobic (or ignorant). But really, why provide a 4x6 option in the first place?  I can't get my Envy 7645 printer to print from the photo tray.  I'm specifically trying to print from the Photos app. I select the print option, set the printer, paper size (4x6), and paper options to "print from photo tray." I select print, and the HP print dialog appears and from there I am unable to set the photo tray as the paper source. The dialog comes up with "Default Settings" as the Presets option and when I scroll down through the dialog to select the Paper Type/Quality option, it shows paper type as HP Photo Papers, Quality is set to Normal, and the Source is set to Automatic (which fails to print from the photo tray; it defaults to the main tray). When I try to shift from Automatic to Photo Tray, I get an error message that says "The paper size selected is not supported by the Photo Tray. To print with the Photo Tray, go to the Page Setup dialog, choose a paper size supported by this tray, and then return to the Print dialog." At this point, I have no idea where to find the Page Setup dialog (it's not immediately apparent in the avialable options and I can't seem to find it under any of the Photos print options). Further, I don't understand why I'm getting the error in the first place as the paper installed in the tray is, indeed, 4x6 (as set in the original Photos dialog). I've tried playing with any number of varities of options (e.g, changing from HP Photo Papers to the generic other photo papers option, not specifying size of photo paper) and any time I select the photo tray option, I get the error message. 

    Hey ,  Welcome to the HP Support Forum.  Did you still need assistance?  I see that you have some interface questions about printing photos from a Yosemite Mac using your HP ENVY 7645 e-All-in-One Printer.  I would like to help.  Have you installed your printer's full-feature driver on the Mac?  If not, click here to install. Also, for your information, your printer's specifications re: supported photo paper sizes is available here.       When I tried printing a photo from my Yosemite machine (albeit with a different printer) this is how I configured the print job:   If I had the option I would also recommend setting the paper type to correspond with whatever kind of photo paper you're using.  If this approach doesn't help try the following steps:  Uninstall your printer - click here for instructions.  Repair disk permissions on your Mac - click here for instructions.  Once you've finished running the above-noted utility, restart your computer. Lastly, click here to reinstall your printer.  Please let me know the result of your troubleshooting by responding to this post.  If I have helped you resolve the issue, feel free to give me a virtual high-five by clicking the 'Thumbs Up' icon below and clicking to accept this solution. Thank you for posting in the HP Support Forum.  Have a great day!

  • MFP M127fn connected, test printing OK, can't print from applications

    Hello Everyone!
    I have just set up my M127fn via USB on a Windows 8 system. The set up went fine. I have a small stack of test pages from the HP software, but it won't print anything from any applications like MSOffice. The HP diagnostic software (Print and Scan Doctor 4.6)  can communicate with the printer and everything checks out OK.
    Any suggestions?
    Thanks in advance.

    Hello! 
    I have replied twice to your last posting, but have heard no response. Unless a solution can be presented quickly, I fell I must return the product. LPug and play was introduced with Windows 95 and this HP product has not lived up to that 20 year old technological standard. My previous replies are copied below.
    Please respond soon.__________________________________________
    Re: MFP M127fn connected, test printing OK, can't print from applications
    Options 
    ‎01-31-2015 08:06 AM
    Hello again!
    I haven't heard a response to my most recent reply. Is there anything you can suggest before I give up and return this HP product to the store? I would like a quick resolution to this. As an update to my previous email (copied below), printing is no longer working through Adobe Reader.
    Thanks,
    Chris
    Re: MFP M127fn connected, test printing OK, can't print from applications
    Options 
    ‎01-28-2015 01:08 PM
    Hi,
    Thanks for getting back to me. I have tried a variety of different programs:
    Mozilla Thinderbird (email) - no results
    MS Word - no
    ms excel - no
    Finale (music software) - no
    Adobe Reader - yes!
    Google Chrome - yes!
    NotePad - yes!
    perplexing!

  • Can not print from preview after Lion Update

         I can't print from preview since I updated to Lion. After I hit command P or select print from the file tab preview totally freezes up and gives me the spinning wheel of death until I force quit preview. I have no issues printing from anything else, such as word, excel, web pages.  So I don't think it's a printer/driver error.  Help?

    I would still mention what printer you have and make sure you have the latest printer driver.

  • All of a sudden I can't print from Firefox. I reinstalled the printer and also reinstalled Firefox. No joy. I can print from Safari.

    I have an IMac, OS X 10.5.8
    I've had it for more than a year and have always been able to print from Firefox without a problem. I have an HP deskjet 6850 printer.
    Now I can't print from Firefox. When I hit print, I get the dialog box but if I click print -- or even click "preview" nothing happens. The dialog box disappears and nothing prints.

    See this: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages

Maybe you are looking for