Can't print from my mac to my HP Colour Laserjet 1600

I have a HP Colour Laserjet 1600. Whenever I print anything from my mac, a icon appears in the dock but, disappears after about 5 seconds and nothing gets printed. Can someone please tell me what I can do?

The third party HPIJS drivers do not support the LaserJet 1600 on a Mac. You can view the list of printers that are supported by the HPIJS drivers at http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/hpijs# Printers.
There are third party drivers that do support the LaserJet 1600, but there are no Mac installer packages available for them. You would have to compile them from source code. These foo2hp drivers can be found at http://foo2hp.rkkda.com/.

Similar Messages

Can't print from Intel Mac w/Snow Leopard to HP 2600

Can't print from Intel Mac w/Snow Leopard to HP 2600. Upgraded from OS 10.4 and printer showed on printer list along with an Epson scanner. but continually shows printer as offline. I finally deleted the HP Color Laserjet 2600n from the printer list. When I attempted to re-install it, it doesn't find the printer at all. I haven't attempted to use the scanner. I also went to HP and downloaded the driver, no luck. I've restarted the computer multiple times, tried it with the printer on, and printer off, as well as pulled the usb cable in and out both ends. No error message on the printer display and it gpes through normal warmup until it shows the green light. I run software update and it shows no updates needed. Help!

Go down a few more posts to the question about the C7180. Answer:
"Re: iPhoto 08 + HP Photosmart C7180
Posted: Aug 19, 2007 1:26 PM in response to: Daniel_D
When you press print the first window is pretty basic.
When you select print on that the next window should have an advanced option.
Click that and see if any of the options in the 3rd dropdown box allow you to specify the 'paper tray'.
AC "
In this new windaow, click "advanced", go to "paper type/quality" and choose " best" and a photo paper. Then you will be able to choose a paper source (photo tray).
Once you have these settings, under presets do "save as", and you can choose the preset instead of going to advanced.
If you have the latest software and drivers downloaded from HP, this will work.
Scott

Can i print from my mac to a win 7 printer?

I have done a search and was unable to find the answer to my question. I have tried to figure out how to print from my MBP to my wifes printer that is attached to her windows 7 computer. I am able to print to that printer over the network with a windows computer but not my mac.
Does anyone know how to get this done or if it is even possible?

Printing from your Mac to a printer attached to a WIndows 7 printer can indeed be done.
It use to be quite easy under Windows XP or even Vista, But Microsoft changed the SMB code in Windows 7, making it more of a headache.
Here is how to share your Windows 7 printer:
http://macs.about.com/od/printersharing/ss/Printer-Sharing-Share-Your-Windows-7- Printer-With-Your-Mac.htm
You may also find this helpful for sharing files with Windows 7 and your Mac:
http://macs.about.com/od/networking/tp/Windows-7-And-Mac-Os-X-Getting-Windows-7- And-Mac-Os-X-To-Play-Together.htm
Tom

I can't print from my Mac wirelessly

I have to use the cord to print from my Mac. But surprisingly others in my home can print to the HP Office Jet Pro 8600. What gives?
This question was solved.
View Solution.

Hi MaryEtta, and welcome to the HP Forums!
I see you are having issues printing. I would like to help.
I am including a document to help determine whch version of the Mac OS you are using:
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
I would also suggest running your Apple updates: OS X: Updating OS X and Mac App Store apps
After the updates, I would recommend reinstalling the HP Officejet Pro 8600 e-All-in-One Printer - N911a Drivers.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Can't print from HP Win 7 64bit notebook to laserjet 1022 via wireless router

I've been able to always print from an XP notebook, but now I can't print from an HP Win 7 64 bit notebook to a Laserjet 1022 installed on an XP desktop via wireless router. Looking for a driver that I can't find anywhere. Followed all the forum help instructions that looked like it would work to no avail. Doesn't seem to be a Win 7 64 bit driver for the 1022 model, (not 1022n).

Click this link:
http://h10025.www1.hp.com/ewfrf/wc/product?product=439322&lc=en&cc=au&dlc=en&os=4062&sw_lang=
then at the center part of the page ,look for
Alerts for this product
» Click here for LJ 1022 Basic Driver for Win 7 (32 Bit) & Win XP
you'll get the drivers
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

Can't print from my mac mini on a home network

My husband died suddenly and has left me with a load of networking problems. Everything was fine (I think) until I changed my ISP. My husband had set up our printers on a wired network, and I know wires go in and out of machines and routers, but there is a lot of physical rubbish about that trying to find how it all fits togther isn't easy.
He worked everything from his computer, a Mac Air (bought January 2011) running 10.8.3. I have a Mac mini (bought August 2012) running 10.8.2, so it looks like I'm just sluggish without him to prod me to get updated.
I can print from the Air, but I can't from my mini. Do I need to have file sharing, do I need a location code or something, if so, what is the location I should use? He knew all this amd we were going to sit down and make a manual for me as the techie thickie, but his cancer suddenly took a turn for the worse and he died suddenly and unexpectedly before we could sort it out.
I am fairly computer literate, htough I'm not the cleverest at computers, but I am streets ahead of many at the office, some of whom don't even know what a key stroke is, honest!
Thanks
Tim

I assume these are Ethernet cables running to the Routers.
Click on the Apple icon at top left of the screen, then About this Mac, then System Report, then Network, list what both show please...
AirPort:
Type:    AirPort
Hardware:    AirPort
BSD Device Name:    en3
IPv4 Addresses:    192.168.1.3
IPv4:
Addresses:    192.168.1.3
Configuration Method:    DHCP
Interface Name:    en3
NetworkSignature:    IPv4.Router=192.168.1.2;IPv4.RouterHardwareAddress=00:03:93:e1:42:c4
Router:    192.168.1.2
Subnet Masks:    255.255.255.0
IPv6:
Configuration Method:    Automatic
DNS:
Search Domains:    opendns.com
Server Addresses:    192.168.1.2
DHCP Server Responses:
Domain Name Servers:    192.168.1.2
Lease Duration (seconds):    0
DHCP Message Type:    0x05
Routers:    192.168.1.2
Server Identifier:    192.168.1.2
Subnet Mask:    255.255.255.0
Proxies:
Proxy Configuration Method:    Manual
Exclude Simple Hostnames:    0
FTP Proxy Enabled:    No
FTP Passive Mode:    Yes
FTP Proxy Server:    web.fastermac.net
HTTP Proxy Enabled:    No
HTTP Proxy Port:    80
HTTP Proxy Server:    127.0.0.1
Auto Discovery Enabled:    No
Ethernet:
MAC Address:    00:14:51:e4:82:0e
Media Options:
Media Subtype:    Auto Select
Built-in Ethernet 1:
Type:    Ethernet
Hardware:    Ethernet
BSD Device Name:    en0
IPv4 Addresses:    10.0.1.11
IPv4:
Addresses:    10.0.1.11
Configuration Method:    Manual
Router:    10.0.1.12
Subnet Masks:    255.255.255.0
Proxies:
Proxy Configuration Method:    Manual
Exclude Simple Hostnames:    0
FTP Passive Mode:    Yes
Auto Discovery Enabled:    No
Ethernet:
MAC Address:    00:16:cb:38:ad:50
Media Options:
Media Subtype:    Auto Select
Built-in Ethernet 2:
Type:    Ethernet
Hardware:    Ethernet
BSD Device Name:    en1
IPv4 Addresses:    192.168.15.202
IPv4:
Addresses:    192.168.15.202
Configuration Method:    DHCP
Interface Name:    en1
NetworkSignature:    IPv4.Router=192.168.15.1;IPv4.RouterHardwareAddress=00:1d:88:44
Router:    192.168.15.1
Subnet Masks:    255.255.255.0
IPv6:
Configuration Method:    Automatic
DNS:
Domain Name:    local.tld
Server Addresses:    192.168.15.1
DHCP Server Responses:
Domain Name:    local.tld
Domain Name Servers:    192.168.15.1
Lease Duration (seconds):    0
DHCP Message Type:    0x05
Routers:    192.168.15.1
Server Identifier:    192.168.15.1
Subnet Mask:    255.255.255.0
Proxies:
Proxy Configuration Method:    Manual
Exclude Simple Hostnames:    0
FTP Passive Mode:    Yes
Auto Configure Enabled:    Yes
Auto Configure URL:
Auto Discovery Enabled:    No
Ethernet:
MAC Address:    00:16:cb:38
Media Options:    Full Duplex, flow-control
Media Subtype:    100baseTX

I can't print from my mac to a cannon IR 4235 UFRII Print Driver

How do i connnect to a canon IR 4235 UFRII print driver from my mac?

What happens when you try to connect to it?

Can I print from multiple Macs?

I have a G4 Quicksilver, a B&W G3, & a clamshell iBook. I use an AirPort Extreme base station with the iBook. My 2 towers are connected to a bridge. (I have a broadband connection). Is there any way I can print to my HP920c from all 3 Macs using the base station (or any way)?
Thanks!

Yes, you should be able to do that.
Depends on system software - need OS X (10.2.3 or higher) to print to AEX.
http://docs.info.apple.com/article.html?artnum=107456

I have the airport extreme. I can print from my mac using wireless. I set up the bonjour with my mac laptop. It see's the printer but when I try to print from my laptop it tells me the printer is offline. Printer is on and prints from mac. Help!

I can not print from my mac laptop. I have the airport extreme for wireless. I can print from my Mac using wireless but not my laptop. Laptop see the printer but says its offline when I attempt to print. Help!

Try this:
http://discussions.apple.com/message.jspa?messageID=8096765#8096765
Good luck!

Can't print from Mac to Windows printer

I have a wireless network of 3 computers and a printer. One is a desktop running XP with the printer attached. The other is a laptop with XP. And the last is a MacBook with 10.4.11.
I can print from both computers running XP but I can't print from the Mac. The Mac sees the printer and I can add it and try to print from it. When I try to print I get the error message:
NTSTATUS_NOMEMORY
I later get the "Unable to connect to SAMBA host, will retry in 60 seconds" message too.

Be sure the printer name assigned in Windows is not more than 11 alphanumeric characters. Long names with punctuation and the like are known to cause problems.
Look at:
Mac OS X 10.4- Can't print to a printer shared by Microsoft Windows;
Mac OS X- Cannot locate a shared Windows printer;
Mac OS X- How to manually add a Windows shared printer;
Setting up to print to a printer shared by a Windows computer via SMB;
And finally this:
Monday, July 24 2006 @ 11:00 AM PDT
Tutorial: Resolving common printer problems
Mac OS X offers a robust printing system with built-in support for hundreds of devices from a wide body of manufacturers. It's not without flaws, however, and printers often become unrecognized or non-functional after a significant Mac OS X update. Printers connected through hubs or AirPort base stations can also exhibit some frustrating issues.
Below is a run-down of the most generally successful printer workarounds. Keep trying until one of them sticks.
Use Printer Setup Repair This tool lets you verify properties of the root user, the Printing Services (lp) user, and Print Operators (lp) groups, reset the printing system, perform CUPS maintenance and more. Run through its set of maintenance tasks before delving into further printer troubleshooting. See how to use it in this article.
Re-install CUPS If you are experiencing printer issues after applying an incremental Mac OS X update, problems may have occurred with your CUPS installation during the update process.
The file is available from this Web site: http://www.cups.org/software.php, and is labeled cups-1.2.1.dmg
Delete then re-add printers/Reset printing system Open Printer Setup Utility, located in Applications/Utilities and look at the "Printer List" Highlight and delete all entries.
Alternatively, go to the "Printer Setup Utility" menu at the top of the screen and select "Reset Printing System".
Click the "Add" button and re-add your printer(s).
Gutenprint and usbtb Some users have been able to resolve printer communication issues by installing the excellent open-source Epson printer drivers available as part of the Gutenprint package (formerly known as Gimp-print) and usbtb, a CUPS back-end for USB printing.
Remove non-required drivers Removing extraneous drivers from /Library/Printers(name of manufacturer) can sometimes resolve printer issues. Remove files that are for other models than your own.
Re-install drivers Re-installation of printer drivers from original media or from a Web download (either directly through the manufacturers site or via a search by model/manufacturer on VersionTracker) can resolve some printer issues.
Try disconnecting from network In some cases, LAN-connected printer, seemingly broken by the Mac OS X update can restored to normal operation by simply disconnecting the device from the network then re-connecting it.
"Communicator Error" -- try power cycling If you receive a "Communication Error" message when attempting to print after updating to Mac OS X 10.4.5, the first workaround you should try is power cycling the printer, as well as disconnecting then re-connecting it to the Mac.
Connecting directly to the Mac If you are having printer problems and are using an external USB hub, try connecting the printer directly to your Mac.
One reader who had success with this method writes:
"Unfortunately the update to Mac OS X 10.4.6 has eliminated the ability to use my Lexmark Z600 series USB printer on my iMac G5 20" iSight (rev C).
"I resolved the problem via the following: I unplugged my external USB hub and plugged the printer directly to my computer."
Disconnect from AirPort and reset For those who are using printers connected to an AirPort Express, Extreme or another wireless device with USB connections, you might want to try the following:
Disconnect the printer from the AirPort unit (or other router)
Wait a few minutes
Plug it back in
Restart the base station unit
Check for your printer to appear in AirPort Admin Utility (located in Applications/Utilities)
Print one copy In some cases, using print one copy instead of the standard print command can result in elimination of crashes that occur during printing.
Try IP printing instead of AppleTalk Some Macs are unable to see AppleTalk printers that are located on the local AirPort (or other wireless) network. Several users have been able to workaround this issue by using IP printing instead of AppleTalk.
Last resort -- Archive and Install As a last resort, try performing the somewhat tedious Archive and Install process, then re-upgrading to Mac OS X 10.4.7. This has solved some otherwise inexplicable printer issues for MacFixIt readers.

How to print from a Mac to a PC by WiFi

I have a printer (Canon MF6530) connected to a PC Windows XP ServicePack3, i want to know, how can i print from my mac (MacBook Black Intel Core 2 Duo(/Lion)) to the PC by using WiFi, i´ve been trying several times, made my research and cant make it. I don´t know how can i use the PC´s IP, in order to connect the computers. Beside i don´t understand the difference between the Options IP and Windows when i try to install the printer in my mac.

It should show up in the available printers list when you select the "+" button in the Print & Fax section of System Preferences then. If it doesn't you can try selecting the IP pane and entering the IP address of the PC and use either LPD or IPP.
Sorry, if it's still not working I would have to say "I don't know."
Best of luck.

If I can print to a wireless printer from my Mac, wouldn't it seem like I could print from my iPad mi I and iPhone 5?

I cannot print from my iPhone5 nor my iPad mini, to a wireless HP Photosmart Premium C309g-m. I can print from my Mac book pro. Is it my settings or the printer that is not set up correctly?

First check to see if its airprint enabled, it will be listed in the first article link. If not, then there are other options listed below.
iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
Google Cloud Print
http://www.google.com/cloudprint/learn/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
iPad Power: How to Print
http://www.macworld.com/article/1160312/ipad_printing.html
Check out these print apps for the iPad.
Print Utility for iPad ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8 Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
FingerPrint turns any printer into an AirPrint printer
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
Print from iOS device to virtually any printer
http://www.lantronix.com/it-management/xprintserver/xprintserver.html

How can I print from my iPad through my Mac Book Pro which is connected to a printer? I was told I could do this.

How can I print from my iPad through my Mac Book Pro which is connected to a printer? I was told I could do this when the iPad and Mac Book Pro are synched together.

Antique lady wrote:
So If I download Printopia on my Mac Book Pro, do I go to iTunes to somehow connect the computer and the iPad?
No.
Printopia (running on your Mac) connects the iPad to your printer.

After update to Snow Leopard, I can no longer print from my Mac Book using my HP D110 but can still print from the web

Hello -
Earlier this week, I updated my Mac Book to Snow Leopard and am now having printing problems. I have an HP Photosmart D110. I have downloaded and installed the driver update. I have deleted and re-installed the printer. I have run the wireless network test (everything passed). I configured th settings on the HP EPrint website. I have shut down and re-started the computer several times. I checked for software updates.
The printer is *recognized* on the Mac Book, iPhone and the iPad. It shows up under the SysPref menu. I have been able to print coupons from the Coupons.com app using the iPhone and iPad, but I can't print from the computer itself. The printer icon opens and it indicates the document was sent but nothing comes out. I'm not sure what I'm missing?!

http://support.apple.com/kb/DL907
Also try powering the printer off for about 10 minutes.

Why cant i print from my ipad using airport express but i can print from my mac using the express

why cant i print from my ipad using airport express but i can print from my mac using the express

Because your printer has to be Airprint compatible and connected to WiFi. There are applications, such as Printopia, that will allow you to print through your computer.

Can't print from my mac to my HP Colour Laserjet 1600

Similar Messages

Maybe you are looking for