Can't print from my new Mini-HP 952C via IP print server

I have a 1 week old Mini that I cannot get to print on my existing home network. It works with my router just fine for internet access, but I have a Netgear print server on there to share my printer with my home office laptop and now the Mini. I set up the printer with IPP protocol, it's at 192.168.0.6 and it's using the HP 900 series Gimp drivers.
However, nothing prints..the printer never even wakes up. I have 3 things sitting in the queue just waiting for days now.
I know it works because I can fire up my Windows laptop and print to the same 192 destination and it goes.
I'm brand new to the Mac world so I am still learning the in's and out's but this one is driving me nuts.
Thanks for any suggestions!

I have a similar problem with my wireless print server.
I have a G5 and an Intel Mac mini and have no problems with the G5 or, with the mini booted into Windows via bootcamp, but have not been able to get the mini to print running Mac OS. Updated to the lastest SW just this morning.
The print queue just goes to stopped with no explanation or diagnostics.

Similar Messages

  • Will the Airport from the new mini work in the old mini.

    I have a MacMini (Intel 2008 model) and I don't use the Airport in it. I want to remove the Airport in that mini and install it in my old MacMini (PPC 2006 model) which doesn't have Airport right now it has a usb wireless stick. I gave that old mini to my mother and she keeps forgetting that the sick is for her internet and removing it. it will also free up that usb port since right now there is no free usb port. Will the Airport from the new mini work in the old mini. I'm not afraid opening them I already installed ram myself in both.

    I assume the old PPC you have is a Mac Mini 1.42GHZ or 1.5GHZ G4 from 2005/2006, which should have shipped with AirPort Extreme and Bluetooth 2.0+EDR pre-installed. What happened to it?
    Anyway, both Mac mini models support Airport Extreme cards, but looking at the repair guides from ifixit.com, the Airport extreme cards look to be different in size.
    Mac Mini G4:
    Mac Mini Intel:
    For the PowerPC G4 model here is a guide on installing the Airport card: http://www.ifixit.com/Guide/Repair/Installing-Mac-mini-PowerPC-AirPort-Extreme-C ard/271/1
    For the Intel model: http://www.ifixit.com/Guide/Repair/Installing-Mac-mini-Model-A1176-AirPort-Extre me/1112/1
    I don't think they would fit, but Good luck.

  • Hi there.  I have a MBP w/ 10.8.5 and an iPad 2 w/ 6.1.3; can I communicate from one device to the other via FaceTime without having to create another apple id?  Thanks in advance for your time and consideration!

    Hi there.  I have a MBP w/ 10.8.5 and an iPad 2 w/ 6.1.3; can I communicate from one device to the other via FaceTime without having to create another apple id?  Thanks in advance for your time and consideration!

    Hi there.  I have a MBP w/ 10.8.5 and an iPad 2 w/ 6.1.3; can I communicate from one device to the other via FaceTime without having to create another apple id?  Thanks in advance for your time and consideration!

  • My home PC runs Windows XP, which doesn't support iCloud.  Is there another way I can get photos from my new iPhone 5 to my PC other than iCloud?  Thanks.

    Is there a way I can get pictures from my iPhone 5 to my home PC, which runs Windows XP?  iCloud is not supported for XP, only Vista and 7.  Can anyone out there tell me how to move photos from my iPhone to my PC?  Thank you.

    http://support.apple.com/kb/HT4083.  Then put the photos in a folder and sync them to your new phone by selecting the folder on the Photos tab of your iTunes sync settings and syncing.

  • Can't scan from brand-new HP PSC 1600 all-in-one printer/scanner/copier

    Just installed this new all-in-one, and the printer and copier work perfectly. But when I try to scan, it won't do anything. Error message says to configure a "scan destination." But the menu to do so, on the desktop, won't open at all. Just stalls and stalls. Everything else seems to work fine, so no connection problems. Anybody know how to shake this menu loose?
    iMac G3, iBook G3   Mac OS X (10.3.9)  

    I've been using the HP psc 1210v for about a year now, and I've always been able to print, but scanning (which I do very infrequently) has always been a problem. Typically, to use the scanner, I have to remove the printer and re-install with the latest drivers from HP's (currently 7.7.2).
    So, after doing this again, I was able to scan a couple of images by using the "HP Device Manager". I just double-click on "Scan Picture", which opens the "HP Scan" application, and I can choose from there how to scan; either opening in another Application or Save to File.
    I'm using 10.4.6, but I know I originally scanned some images using this printer in 10.3.9. Hopefully this will continue to work!
    Mac mini G4   Mac OS X (10.4.6)  

  • Trying to install SL on a new hard-drive for my iMac, when asked which disk to install on it gave me no options, i followed advice from another forum and created a partition, now can't boot from the new drive at all. Help?

    I've had **** with my iMac, the hard-drive failed so i replaced it with a new 1TB Samsung drive. Then when i tried to install SL from the install disk, all went to plan until it asked me which drive i wanted to install it on, where it came up with a box where my options should have been, but instead it didn't give me any options to install it on any drive i.e. it asked which drive i wanted to install it on but no drives came up to select.
    So i followed the advice from another forum, look at the 'Extended Hard-drive preparation' response
    ( https://discussions.apple.com/message/10576009#10576009 )
    After following these instructions i have now got a new partition, but when i restarted my computer to install SL on the drive, the option to boot from the drive is now not available, now i must boot from the install disk, whereas before i was able to boot from either the install disk or the hard drive. The hard drive is still visible in disk utility as it always has been, but i am now unable to boot from it, let alone install SL.
    Please help my iMac has been broken for months and i've been trying to fix it for so long and am getting problem after problem. Thank you!
    <div class="mcePaste" id="_mcePaste" style="position: absolute; left: -10000px; top: 0px; width: 1px; height: 1px; overflow-x: hidden; overflow-y: hidden;" mcestyle="position: absolute; left: -10000px; top: 0px; width: 1px; height: 1px; overflow-x: hidden; overflow-y: hidden;"></div>

    Hi db2
    That off the shelf MS-DOS / FAT-32 drive needs to re-partitioned GUID Partition Table / Mac OS Extended (Journaled) before you can install OS X and Startup your Intel iMac from it.
    1. Boot from your original install or retail SL DVD and open Disk Utility.
    2. Highlight the new HD in the list of drives and select the Partition tab.
    3. Under Volume Scheme select 1 Partition and click on the Options... button.
    4. Select GUID Partition Table in the drop down window and click OK.
    5. Set the Format to Mac OS Extended (Journaled) and click the Apply button.
    6. Once thats done, then you can do a clean SL Install, Restore from TM , your old HD or  Bootable Clone.
    Dennis

  • Hello, I'm trying to transfer my old itunes library to a new computer using home sharing. It's switched on in both computers, but I can't see the old library in the new computer. But I can see tracks from the new computer on the old one. Please help.

    Apologies for poor syntax, my arm's a little sore. Yes, one computer (old) is vista, new is Windows 8. Shouldn't I be able to import the whole library using home sharing? Am I doing something wrong? Thank you in advance

    I am having the same issue.  I recently purchased a new laptop and I have spent the last 3 days using the home share to slowly transfer all 22,000 songs.  However yesterday morning when I turned on both computers to continue the process I am having the following issue:
    both computers are running the same windows OS (8)
    both computers are running the same version of itunes
    both computers are logged in with the same apple ID
    both computers have home sharing turned on
    Now however I can see the NEW computers itunes library in the drop down box on the OLD computer, however I can not see the OLD computers itunes library on the NEW computer.  I can no longer see "HOME SHARES" on the drop down LIBRARY list on the new computer.  I've taken the following steps to correct the error:
    reset the router
    completely shut down BOTH computers and brought them back up
    reopened itunes
    re-logged in on both PC's
    re-activated both PC's with home share
    The articles and help from the apple sites are worthless and it says if you can't see a library just turn home sharing off then back on - I've completed the above steps NUMEROUS times.  After spending 4 days on transferring my music I really do not want to have to start over by using an external hard drive and then importing that way.  I would like some help on discovering why the new laptop is no longer seeing my old library. (When it has been working up to this point) 
    Thanks in advance.

  • How large of a picture can be made from the new iPhone 5s camera?

    I have taken some nice pictures with my new iPhone 5s, and would like to have them enlarged.  Can someone please tell me how large would an 8mp camera's pictures be able to be enlarged to without going blurry?

    Read here:
    http://thebeginnerslens.com/iphone-photography/printing-iphone-photos-a-guide-to -print-size.html

  • I can't boot from CD (new install)

    Can this board load the OS (XP-Pro) from a CD on a new install?
    I have a 875P NEO-FIS2R board, P4 2.8, two SATA 80GB Hitachi drives and a NEC CD/DVD-Rom drive.  When I power up I get I get the logo screen and the a brief flash from a screen that looks like a Promise SATA bios screen that says something like "Bios not installed" and then a DOS like screen the says:
    Boot Failure
    Insert Boot Diskette in A:
    Press any key when ready
    Problem is I don't have a floppy drive.  The last two systems I made did not need one to boot.  They see the CD and boot.  
    Seem to me the System BIOS came pre-toasted from the factory.
    Any clues?

    I don’t think anything’s wrong with your board; just make sure (a) that your cd-rom shows up in the bios and (b) that it has the highest boot priority.
    Edit: you may also want to turn the logo off at least temporarily so that you can get a better idea as to what’s going on with the boot sequence. Also, don’t worry about the “bios not installed” message. It’s referring to the promise controller: if no drives are hooked up to it, it doesn’t load its bios. This has nothing to do with your system bios.

  • How can I recover from the new Pages

    Does anyone know how I can recover a Pages file which has become locked into the new Pages program? I never edited it with the new Pages, but now I'm told I must have the new Pages to open it. I even tried opening it with the new Pages and converting it to PDF with the plan to copy and paste it into Pages '09, but i lost control of line spacing, etc. (It is a 4-column file of data on one page (in the '09 version, that is). Appreciate any help.

    Jay,
    Surely you did edit the file with Pages 5.2, or you wouldn't be having this problem. It's an easy mistake to make since both versions have exactly the same filename and extension. They are just stored in different folders. 5.2 is in Applications and 4.3 is in Applications/iWork '09.
    Use TimeMachine to locate a clean backup file.
    Jerry

  • Can a song from the newer GarageBand 10 be transferred back into GarageBand 6?

    Can a composition in GarageBand 10 be transferred back to GarageBand 6?

    GarageBand 6.0.x  cannot open GarageBand 10.0 projects. You can only upgrade GarageBand 6.0.x  projects to GarageBand 10.0.  You would have to bounce each GarageBand 10.0 track track individually as an audio file and combine them into a new GarageBand '11 project.

  • I can't boot from my new SSD...

    Hello,
    I have a Corsair Force GT. I copied my actual hard drive on the SSD with an external cable and Carbon Copy Cloner.
    I restarted the macbook (pro mid-2012) and boot by pressing the option key and it worked !
    So I installed it inside my macbook using the optical bay. And now, when I try to boot from the SSD it doesn't work... But when I boot from the original hard drive, I can use the SSD as a second hard drive.
    (in system preferences I can't select the SSD as default boot disk. I only see the original hard drive)
    Could someone help me, please ?

    Shootist007 wrote:
    And by the way your warranty is now void. Good Luck.
    Since the OP 1 year warranty is now voided out, would they still be able to get Apple Care? 

  • High Pitched Intermittent Beep coming from brand new mini

    This is driving me nuts, beeeep.....beeeeeep...beep...beep.. beeeeeeeeep. non stop from the moment on turn on the mini. is this normal???
    1.83, 1 gig of ram

    If you are within the free 90-day telephone support period I would just call AppleCare, and have them sort it out.
    Alternatively, try booting from your install disc (but don't install!) and see if the Mini beeps when just sitting at the first install screen.
    To boot from the install disc, insert the disc, shutdown, startup, and hold down the C key at the startup chime -- and keep holding it until the "gear" starts spinning on the screen.
    You could also do the same, but hold down the D key, to run the hardware diagnostic tests.

  • How can you tell from old/new?

    Thanks...

    If you look on the website, the old will have a number along with letter A. The new will have a number with a B.
    So according to BestBuys website, they have the iPods with the new Apps.

  • What can I remove from a new installation to free up space

    I use Retrospect to backup 10.4.6. I only use the Mac for Logic Audio - and I've got 20GB of files on a new installation.
    This seems a bit high?
    Is there a way to cut down the total size of the files by 5GB - or some significant amount?

    Hi Les,
    Is you HD partitioned? If so, then non-Apple apps could be moved to the other partition. For example, I have Quicken and M$ Office on the 2nd non OS Partition. If Upgrades or ??? ask you where to put them then the other partition is safe. Apple apps should stay in the OS part or they won't upgrade properly.
    Putting them on a bootable FW HD may be possible but I have no exprience w that.

Maybe you are looking for