Can't print from OfficeJet to LaserJet

I own an OfficeJet Pro L7580 and a LaserJet 4000. I want to scan from the OfficeJet and print to the LaserJet (which is faster and more economical). When I choose "Scan to Printer" on the OfficeJet, it shows the LaserJet as an available option to print to, but when I click on the print button, I get the following error message: "Images selected for printing could not be automatically printed due to an application error. You may need to reinstall your HP Photosmart Software". Can anybody help me with this?

Need more info. What is it doing, or not doing?
What specific printer are you using? Here is the list of airprint printers.
http://support.apple.com/kb/ht4356
Forget the ipad for a moment. Does the printer see the wifi network? From the printers control console, look for the utility to find and install any firmware update that has been issued for that printer. Most airprint printers need the firmware update before they will work.
The try the pad again.

Similar Messages

Now really can't print from Officejet Pro 8600 Plus

This is my second attempt to get help. The first help made it worse. I had been unable to print from my wireless printer from my MacBook Pro, iPad, or iPhone. After about 20 hours I got it to print from a cable (it sees my network but none of my devices can see it). So I posted here asking for help and was told to uninstall the software, repair disc permissions, and reinstall the software. But when I downloaded the new software my computer would not install it because it says it is for Mac System 10.7 or less and I have 10.10. So now I can't print anything at all. I need this for work. Please help me fix it for real. I can't take this any more.
This question was solved.
View Solution.

Thanks for providing that information JeanneS1. I have provided some more information that should help us resolve this issue. I know you have already spent a lot of time on this, but I am willing to continue trying to get this working properly over the wireless network.
Power cycle the router, restart the Mac and the printer.
I would print off a Configuration Page to see if the printer still has a valid IP address.
Try to access the printer's Embedded Web Server. If it connects then the printer is still on the network.
If you don't have a valid IP address, once more run the Wireless Setup Wizard on the printer.
Setup a Static IP address for the printer, this way the router will always assign the same IP address to the printer. Which should stop the disconnection.
Here is a document on this issue. But for now just follow Solution two: Assign the printer an automatic static IP address under Mac. Printer Does Not Maintain Wireless Connection.
Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and delete the old driver, click the + sign to add the driver, you might have to click the drop down to select the printer's name to add it in. (Officejet Pro 8600 Plus)
Here is a screen shot.
Then test the printer.
You might need to update the printer's firmware if you haven't already.
How far is the printer from the router?
Here a few causes of why the printer can lose the wireless connection:
The recommended distance between the printer and the router is 1.0 meter to 1.5 meters (3 ft to 5 ft).
A nearby device that emits radio signals (such as a microwave or cordless telephone) might interfere with the wireless connection.
A virtual private network (VPN) prevents the printer from accessing the computer and wireless network.
The network connection is no longer active, or has low signal strength.
The printer goes into sleep mode or standby mode.
A firewall prevents the printer from accessing the computer and wireless network.
What kind of router are you using?
What kind of security are you using? (WPA2/WPA, WPA Personal, WEP)
What band is the router set to? (2ghz or 5ghz)
I believe by changing these settings on the router will help with this issue if it continues. You might need to contact the router company to make those changes.
Make sure that on your wireless modem, the channels for 2.4Ghz and 5Ghz are fixed and are not set to automatic !!
Select channel 6 for 2.4Ghz and channel 36 for 5Ghz frequency.
Hope this helps get you up and running again.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How can i print from ipad to an HP officejet 6600

How can I print from my iPad to my HP OfficeJet 6600 ???? I can't see the printer ?????

Your printer is on the list of printers that support your print.
http://support.apple.com/kb/ht4356
You may have to do a firmware update.Many HP printers require an update to their firmware before Airprint can be used. Check the HP website to see if a firmware update is available for your model printer.

My HP Officejet Pro 8600 can't print from my MacBook Air

Hi,
My HP Officejet Pro 8600 can't print from my MacBook Air. It keeps on showing "The printer is not connected", but the screen on the printer shows connected. I often reset the printer 'EVERY TIME" I want to use it. I also tried to turn off my laptop and printer several times before printing. If I'm lucky enough, it will work maybe for one or two prints. If no luck then I'll have to reset everything again. Sometimes I reset the printer, the printer will not show on my selection.
This question was solved.
View Solution.

Hello boojoo1tw,
Welcome to the HP Forums!
I understand you're unable to print most times with your Officejet 8600. How is this printer connected? Wireless or USB? What is your operating system on your Mac computer? Click here to find out.
If your printer is wireless, then I would recommend assigning a "Static IP Address" by following this HP document on Printer Does Not Maintain Wireless Connection.
Please post your results, as I will be looking forward to hearing from you.
I worked on behalf of HP.

Can't print from HP Win 7 64bit notebook to laserjet 1022 via wireless router

I've been able to always print from an XP notebook, but now I can't print from an HP Win 7 64 bit notebook to a Laserjet 1022 installed on an XP desktop via wireless router. Looking for a driver that I can't find anywhere. Followed all the forum help instructions that looked like it would work to no avail. Doesn't seem to be a Win 7 64 bit driver for the 1022 model, (not 1022n).

Click this link:
http://h10025.www1.hp.com/ewfrf/wc/product?product=439322&lc=en&cc=au&dlc=en&os=4062&sw_lang=
then at the center part of the page ,look for
Alerts for this product
» Click here for LJ 1022 Basic Driver for Win 7 (32 Bit) & Win XP
you'll get the drivers
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

HT4356 My printer is HP Officejet Pro 8000 A809 Series and I don't see it listed. How can I print from iPad?

My printer is HP Officejet Pro 8000 A809 Series and I don't see it listed. How can I print from iPad?

You can use 3rd party software such as Print n Share if you have a PC or Printopia if you have a Mac.
Or you can check HPs site and see what they have available.

I can't print from my mobile device. HP officejet 6500a eprint all in one. windows xp

I can't print from my mobile device. HP officejet 6500a eprint all in one. windows xp

nicahermosa42,
There are a few ways to print from your Android phone to your HP printer.
Send an email from your phone to your printer's ePrint address (ex. [email protected]).
Download the HP ePrint Home and Biz app from the Android Market to print photos and documents to your HP printer over your wireless network or through ePrint.
If you need assistance with either method of printing, please post again.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Can I print from my iPhone 4 using an HP Officejet Pro 8600 N911a

Can I print from my iPhone 4 using an HP Officejet Pro 8600 N911a. And if so how do I do this????

Hi stacy7560,
You can print from your iPhone4 to your 8600 using Apple's AirPrint feature. I have a few steps you can follow to do this:
1. Make sure the iPhone is on the same wireless network as your printer.
2. Select the mail application on the iOS device and open an email you wish to print.
3. At the top of the screen, locate and press the action icon.
4. Select the "Print" option.
5. Make sure your printer is in the top field of the Printer Options screen. If not, tap “Select Printer.” Your printer should appear.
6. Press the “Print” selection.
Note: To print a photo, follow these same steps once you have opened the image you wish to print.
Let me know if this helps.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

I can't print from macintosh laptop unless I print first from my desktop. officejet 6500a

i have a macintosh laptop. I can't print from it unless I print first from my desktop. officejet 6500a.
it says: "communication failure. the computer is no longer able to communicate with the printer."
Yet, once I print something from my desktop, I can print from the laptop just fine, until I turn one of the machines off...

Is the printer connected to your wireless router? What router? What version of OS X?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Officejet pro 8500A plus can not print from ethernet connect computer

Setup:
HP Officjet Pro 8500A Plus connected to a netgear wireless router using wired ethernet.
Desktop with windows7 connected to the same netgear wireless router using wired ethernet.
Can print from other computers connected to the the wireless router using wifi but can not print from this desktop connected using the wired ethernet.
Can not print from the Windows7 PC which is connected to router over wired Ethernet. Printer is connected to the same router using wired Ethernet. Other notebook connected to the router over wireless prints.
Windows7 device & Printerhows printer is ok.
Once a job is sent to printer, show status printing for a while after the status will show error.
Now the status shows error
HP Print and Scan doctors shows printer ok.
But if you try to print the test page, unable to communicate to printer error comes.
Tool box can read all information about the printer

Please reload the drivers and software on the Win7 PC. Reconfigure and try again.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

How Can I Print from my Microsoft Surface Running Windows 8 RT?

How Can I Print from my Microsoft Surface Running Windows 8 RT?
Most new wireless printers won’t have a problem printing from the Microsoft Surface with Windows 8 RT. All you should have to do for these printers is tell them to print and they will. Older wireless, Ethernet, and USB printers might not have an officially supported driver in Windows 8 RT, but there is a way to get the printers working. There are different requirements depending on how the printer is being connected to the Surface.
Note: All steps below are only for PhotoSmart, OfficeJet, DeskJet, and other HP Inkjet printers. These steps are not for Laserjet printers or printers from other manufacturers. These steps may not work for all Inkjet printers. If these steps don’t work, try different drivers from the list until you find one that will work (you’ll understand what I mean once you follow the steps below). If none of the drivers work, your printer will not work with the Surface.
For networked printers (wireless or Ethernet), all you need is either the Surface keyboard, or an external USB keyboard to connect to the Surface. This just makes anything you have to type easier to type. You will also need to have the Surface and the printer connected to the same network.
Starting from the right edge, swipe your finger left on the Surface screen to bring up the Charms bar.
Touch Search.
Below the Search Box, touch Settings.
In the search Box, type Devices and Printers.
Touch Devices and Printers.
Touch Add a Printer.
Touch “My printer is not listed”.
Select the TCP/IP option and touch Next.
Enter the printer’s IP address and touch Next. Note: You can get this from the printer’s Network Configuration Page, or from your router’s DHCP list.
The Surface will locate the printer and try to install it. The install will fail and the Surface will ask you what you want to do, search the internet for the driver, or manually install the driver. Choose to install the driver yourself.
Touch “I want to choose from a list of drivers”.
If no drivers appear in the list, make sure the box next to “Show compatible drivers” is not checked.
Choose HP from the Manufacture list.
Choose DeskJet PCL 3 Class Driver from the Drivers list. If that driver doesn't work, try using the Photosmart PCL3 driver, or the Officejet PCL 3 driver. (Thank you JonW for letting me know about these other alternates. )
Touch Next.
Touch Finish.
Test printing.
For USB connected printers, you will need a USB cord to attach the printer to the computer.
Connect the printer to the computer via USB.
Windows will try to find the drivers but will not be able to.
Here Windows may ask you if you want to choose the driver to install. If it does skip to step 14 below.
Starting from the right edge, swipe your finger left on the Surface screen to bring up the Charms bar.
Touch Search.
Under the Search box, touch Settings.
In the Search box, type Device Manager.
Touch Device Manager.
Touch View and select Show Hidden.
Search for the printer in the Device Manager. It should be under Other Devices with a yellow caution sign beside it.
Select the printer from the list.
Touch Action.
Touch Update Driver, or Install whichever one it displays.
The Surface will ask you what you want to do, search the internet for the driver, or manually install the driver. Choose to install the driver yourself.
Touch “I want to choose from a list of drivers”.
If no drivers appear in the list, make sure the box next to “Show compatible drivers” is not checked.
Choose HP from the Manufacture list.
Choose DeskJet PCL 3 Class Driver from the Drivers list. If that driver doesn't work, try using the Photosmart PCL3 driver, or the Officejet PCL 3 driver. (Thank you JonW for letting me know about these other alternates. )
Touch Next.
Touch Finish.
Test printing.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
This question was solved.
View Solution.

Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Can't print to a HP LaserJet 5000 we've used for years

We're a design studio with 4 Mac's and have had this HP LaserJet 5000 printer for a longtime and love it. A real work horse and low maintenance. Two of our cpu's are running Mavericks, 2 are running 10.7.5 and the older one is still running 10.5.8. This older 10.5.8 cpu has always worked flawlessly with this printer. IT'S ALWAYS CONNECTED to the printer. But after recent OSX upgrades my 10.7.5. CPU, my Mavericks iMac and recently purchased Mavericks MacPro cannot print to this printer UNLESS I have the older 10.5.8 cpu awake and running. If I shut this older cpu down or put it to sleep, all the other computers can't print to this printer. This older mac is going to be retired soon so I have to find a way that the remaining 4 CPU''s can connect to the Airport Extreme (which they do now) but can also see the printer and I can actually print from it. I've downloaded the latest HP driver software here at apple that was suppose to fix this but nothing. It seems like this older CPU is acting like a server and all requests have to go through it. How I stop this so that each independent CPU can print through the wireless Air Port Extreme.
As a test, I even took a 10' Cat 5 Ethernet cable and plugged it into one of CPU ports and then directly into the back of Printer, bypassing the whole wireless approach, went to Pref's and activated Ethernet 2. CPU still can't print to it. This printer on has Ethernet. Over the years we just set up our AirPort Extreme, plug a cat 5 cable from there to a 5 way ethernet splitter and from there 1 cat 5 goes to the printer. So as I have said everything works great IF I have the older CPU up and running but what I'm I going to do with I retire that unit.
Need some help here please. I been working with Mac's since 1988 and consider myself a power user but this one has really got me.
Suggestions…?

Did you read my reply here: Printing concerning an older HP LaserJet 5000.

Can't print from Appleworks 6

My wife's computer is a G4 Sawtooth, running OSX 10.2. Printer is an Epson Stylus Photo R220. All of the sudden, we can't print from Appleworks word processing. When we try, the printer window from the Print Center says that it's opening communications with the printer for a bit, but after a short time stops the printer and quits trying. The thing is, we can print from MS Word. Also, this computer is networked to my G4 ibook (10.3.9), which has an Epson Stylus Photo 825 attached. Using printer sharing, I can print through Appleworks to the Stylus 825 from the Sawtooth.
This is a sudden onset problem. Yesterday she could use the R220. Today she can't. I've tried reinstalling the printer driver, with no effect.
At about the same time, in what may or may not be a related problem, I stopped being able to print from either computer to my HP laserjet 4050tn, which is on an ethernet print server. Reinstall doesn't help.
I had an intel mini whose harddrive died attached to the network. The mini is still out for repair, but I've also used both of these printers successfully since the mini was disconnected.
Any ideas?
duo core mini; ibook G4: G4 Sawtooth Mac OS X (10.2.x) Epson Stylus Photo R220 printer

Sudden onset of problems is a sure sign of corrupt preferences. Printing problems are among many that may be cured by deleting the AppleWorks preferences. See my user tip, AppleWorks has stopped working correctly, for more information.

Can't print from FireFox!

I got a new HP OfficeJet 4500 Desktop printer that can't print from Firefox only.
I tried printing the same webpages from Firefox and IE, and couldn't do it in FireFox.
The printer starts printing that few secs later the printing stops and doesn't go on.
What do I do?!

See this: <br />
[http://kb.mozillazine.org/Problems_printing_web_pages]

Can't print from Intel Mac w/Snow Leopard to HP 2600

Can't print from Intel Mac w/Snow Leopard to HP 2600. Upgraded from OS 10.4 and printer showed on printer list along with an Epson scanner. but continually shows printer as offline. I finally deleted the HP Color Laserjet 2600n from the printer list. When I attempted to re-install it, it doesn't find the printer at all. I haven't attempted to use the scanner. I also went to HP and downloaded the driver, no luck. I've restarted the computer multiple times, tried it with the printer on, and printer off, as well as pulled the usb cable in and out both ends. No error message on the printer display and it gpes through normal warmup until it shows the green light. I run software update and it shows no updates needed. Help!

Go down a few more posts to the question about the C7180. Answer:
"Re: iPhoto 08 + HP Photosmart C7180
Posted: Aug 19, 2007 1:26 PM in response to: Daniel_D
When you press print the first window is pretty basic.
When you select print on that the next window should have an advanced option.
Click that and see if any of the options in the 3rd dropdown box allow you to specify the 'paper tray'.
AC "
In this new windaow, click "advanced", go to "paper type/quality" and choose " best" and a photo paper. Then you will be able to choose a paper source (photo tray).
Once you have these settings, under presets do "save as", and you can choose the preset instead of going to advanced.
If you have the latest software and drivers downloaded from HP, this will work.
Scott

Can't print from OfficeJet to LaserJet

Similar Messages

Maybe you are looking for