Can't print from photo tray and can't set my usual margins

I have a Photosmar tD7560 printer. My computer is an HP Pavillion e9120y PC, recently upgraded from Vista Home Premium 64 bit to Windows 7 home premium 64 bit (clean install). The printer was not compatible with Windows 7 but the issue was resolved here when I was advised by a member to download a fix. (Thanks again!)
I have printed with no problem until today when I tried to print out a 4x6 index card from the photo tray. I set the paper size to 4x6 but when I tried to print it, i got an out of paper message. I put paper in the main tray and it printed from there.
Also, suddenly I cannot reset my bottom margin to .5 inches, it must be.59 or greater. This happened after I tried to print from the photo tray because before, I was able to set a .5 inch margin. (This is in Word 2003)
I hope someone can help with this!

Hello AnnArritola,
Welcome to the HP Forums! The HP Officejet 5745 printer defaults to the main paper try. Printing using the printer’s dedicated photo tray can be accomplished by accessing the print driver and selecting the photo tray before printing. Below is a support document that should help with the necessary steps.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04392289&tmp_task=useCategory&cc=us&dlc=en&lang...
Regards,
Steve_S_HP
p.s. A quicker method once you’re in the printer driver is to go to the shortcuts tab and select photo printing (this will automatically select the dedicated photo tray).
I am a HP Employee.

Similar Messages

In adobe reader, I can't print from different trays?

Using Adobe Reader, I can't print from different trays on my Lexmark x954 printer. I've tried reinstalling the print driver (latest version) and reinstalling Adobe Reader with no luck. I can see the trays and even select them in the print dialog box in adobe but when I print I am unable to print from the correct trays. It always prints from tray 3 of my printer no matter what tray and type of paper I choose in adobe. Any suggestions?
I've also noticed a problem printing through Preview. I can select different trays using preview but the print time is extremely slow. It seems like it has to re-download the pdf page each time it goes to print. So a 100 page print job takes 20-30 minutes to complete which means other have to wait for my job to complete so it really slows our office down.
Thanks for your help. Also, I am using the mountain lion operating system. Thanks again!

Don't know whether it will make any difference, but a new version of Adobe Reader has just been released:
http://www.macupdate.com/app/mac/73/adobe-reader (version 11.0.03).

Why can I print from my iPhone and not my iPad? I have been able to do it in the past and have tried a hard reset but it can no longer find the printer.

Why can I print from my iPhone and not my iPad? I have been able to do it in the past. I have tried a hard reset but it still cannot find the printer.

In addition to rebooting the router and the iPad, I would reset the printer as well. Unplug the printer from power and do the same with the router. Leave the router unplugged for about 30 seconds. Plug the router in first and let it totally start up, plug the printer in again, and then reboot/reset the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that doesn't work, you can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. Your WiFi passwords, location services, device preferences all have to be re-entered. You will not lose any data or media whatsoever.

HP Envy 7645 won't print from photo tray

FIXED my own problem!Never thought to try setting the paper size to 4x6 in/10x25 cm! That's apparently what I get for being metric-phobic (or ignorant). But really, why provide a 4x6 option in the first place? I can't get my Envy 7645 printer to print from the photo tray. I'm specifically trying to print from the Photos app. I select the print option, set the printer, paper size (4x6), and paper options to "print from photo tray." I select print, and the HP print dialog appears and from there I am unable to set the photo tray as the paper source. The dialog comes up with "Default Settings" as the Presets option and when I scroll down through the dialog to select the Paper Type/Quality option, it shows paper type as HP Photo Papers, Quality is set to Normal, and the Source is set to Automatic (which fails to print from the photo tray; it defaults to the main tray). When I try to shift from Automatic to Photo Tray, I get an error message that says "The paper size selected is not supported by the Photo Tray. To print with the Photo Tray, go to the Page Setup dialog, choose a paper size supported by this tray, and then return to the Print dialog." At this point, I have no idea where to find the Page Setup dialog (it's not immediately apparent in the avialable options and I can't seem to find it under any of the Photos print options). Further, I don't understand why I'm getting the error in the first place as the paper installed in the tray is, indeed, 4x6 (as set in the original Photos dialog). I've tried playing with any number of varities of options (e.g, changing from HP Photo Papers to the generic other photo papers option, not specifying size of photo paper) and any time I select the photo tray option, I get the error message.

Hey , Welcome to the HP Support Forum. Did you still need assistance? I see that you have some interface questions about printing photos from a Yosemite Mac using your HP ENVY 7645 e-All-in-One Printer. I would like to help. Have you installed your printer's full-feature driver on the Mac? If not, click here to install. Also, for your information, your printer's specifications re: supported photo paper sizes is available here. When I tried printing a photo from my Yosemite machine (albeit with a different printer) this is how I configured the print job: If I had the option I would also recommend setting the paper type to correspond with whatever kind of photo paper you're using. If this approach doesn't help try the following steps: Uninstall your printer - click here for instructions. Repair disk permissions on your Mac - click here for instructions. Once you've finished running the above-noted utility, restart your computer. Lastly, click here to reinstall your printer. Please let me know the result of your troubleshooting by responding to this post. If I have helped you resolve the issue, feel free to give me a virtual high-five by clicking the 'Thumbs Up' icon below and clicking to accept this solution. Thank you for posting in the HP Support Forum. Have a great day!

If I use my Airport Express to establish a network printer can I print from my IPad and iPhone?

I want to be able to print to a network printer with my IPad and IPhone with IOS 5.0.1. Seems like there is a limited number of printers that can "AirPlay" from these devices. I have an Airport Express and I know how to connect a printer and set it up as a network printer, my question is can I wirelessly print from my Ipad and iPhone then. Seems too easy for what appears to be a limited set of new printers that have that have Thai function built in.

Printopia allows me to print from an iPad2 to any printer that is connected to the USB port of my AriPort Extreme.
You might want to check it out here:
Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...

Can't print from 2nd tray

My printer has a 2nd tray for photo paper. How do I get iPhoto to print from that tray to print out photos at home?

printer specific options (like paper source if it is supported on your printer) are on the final print window - if there are not there click on the little grey triangle to the right of the printer name to open the full window up
LN

7520 not printing from photo tray

Brand New 7520 is not printing from the photo tray. I am printing from photoshop CS5 and I do not see where I can select the photo tray. In this instance, I am selecting 4x6 paper, but then it tries to print from the main tray, which I have emptied so I do not continue to print on plain paper. I have browsed some of the previous posts, but I have not been able to find a solution. It there a way that I can tell it to always print photos or a certain size paper from the photo tray? The reason I bought this printer was to be able to print small photos. Any assistance would be greatly apprecaited! Ciao!

I understand now. I want to provide a document on how to print photos in version 10.6 which should be relatively close to your settings. If this doesn't help you, let me know and I will gladly hand-write individual steps for you, this is just a little easier at this time. I have learned from personal experience that the main tray will not even register the photos, as I had a customer one day kept getting an out-of-paper error message during ePrint and he did not know you had to lift up the see-through tray to put photos in there. That isn't to say it is not possible through a Mac program. ePrint is really basic so it likes everything to be perfect. Tell me if the above link helps you. If not, I have your version of Mac (I believe) and this printer. I will see if I can recreate this if you need me. PS- Thank you so much for providing this picture for me for troubleshooting purposes. Might I add, that is a beautifully artistic photo.

7515 keeps trying to print from photo tray when main tray selected (Mac)?

Just started uing a iMac with the 7515. It's driving me nuts that it keeps trying to print from the photo tray when I have main tray clearly selected in the print dialog box.
I'm trying to insert the picture of the print dialog box, but doesn't seem to be working. In presets (the second selection box from the top) I've got "Print from Main Tray" selected pretty plainly.
Turning the printer on and off does not help.
Any help appreciated.

Hey Chriscic,
Welcome to the HP Forums!
Always the best recommend steps to start off with when troubleshooting with a Mac, is to reset the printing system. Then verify, and repair the disk permissions.
So to start with the reset of the printing system, I have included the document 'Macintosh: Resetting the Printing System in Mac OS X'. Please select your version of Mac, and follow through the steps. If you have Mavericks, you can follow the steps for OS X v10.8. Also, please do not re-add the printer just yet.
After the reset of the printing system, you will need to complete the verify, and repair of the disk permissions. I have included the document 'Disk Utility 12.x: Repair disk permissions'. For step three when it asks you to select a disk, please select your hard drive. Once the repair has completed, please restart the Mac.
After the Mac has restarted, you can now add the printer back into the print queue. The try to print. Are you still experiencing the same issue? Or are you able to print from the main tray?
If you do require further assistance, please let me know the version of Mac OS X you are running. If you need it, I have included the document 'Finding your OS X version and build information'.
Looking forward to your reply.
I worked on behalf of HP

Can't print from any account and any application

I have a ibook that can't print to a hp1320n through wireless connection from any user account and any application, other machines have no problem.
It works before. below is part of the error log. An yhelp will be appreciated.
Thanks
Allan
I [10/May/2006:09:51:16 -0700] System woke from sleep
I [10/May/2006:09:55:57 -0700] System going to sleep
I [10/May/2006:09:56:15 -0700] System woke from sleep
I [10/May/2006:10:22:42 -0700] Printer 'mcx_1' deleted by ''.
I [10/May/2006:10:22:42 -0700] Saving printers.conf...
E [10/May/2006:10:22:42 -0700] getprinterattrs: resource name '/printers/mcx_1' no good!
I [10/May/2006:10:24:16 -0700] Setting HPLaserJ1320 device-uri to "smb://server/HPLaserJ1320" (was "file:/dev/null".)
I [10/May/2006:10:24:16 -0700] Setting HPLaserJ1320 printer-is-accepting-jobs to 1 (was 0.)
I [10/May/2006:10:24:16 -0700] Setting HPLaserJ1320 printer-state to 3 (was 5.)
I [10/May/2006:10:24:16 -0700] Saving printers.conf...
I [10/May/2006:10:24:16 -0700] New printer 'HPLaserJ1320' added by ''.
E [10/May/2006:10:26:06 -0700] load_job: Unable to queue job for destination "http://127.0.0.1:0/printers/mcx_1"!
E [10/May/2006:10:26:06 -0700] LoadJobs: Job error; deleting file "c00001"
E [10/May/2006:10:26:06 -0700] load_job: Unable to queue job for destination "http://127.0.0.1:0/printers/mcx_1"!
E [10/May/2006:10:26:06 -0700] load_job: Unable to queue job for destination "http://127.0.0.1:0/printers/mcx_1"!
E [10/May/2006:10:26:06 -0700] LoadJobs: Job error; deleting file "c00016"
E [10/May/2006:10:26:48 -0700] getprinterattrs: resource name '/printers/??' no good!
E [10/May/2006:10:26:49 -0700] getprinterattrs: resource name '/printers/?? no good!
E [10/May/2006:10:32:56 -0700] getprinterattrs: resource name '/printers/ ' no good!
E [10/May/2006:10:32:56 -0700] getprinterattrs: resource name '/printers/ ' no good!
I [10/May/2006:10:34:55 -0700] Scheduler shutting down normally.
I [10/May/2006:15:22:04 -0700] Listening to 7f000001:631
I [10/May/2006:15:22:04 -0700] Listening to 300ae0:0
I [10/May/2006:15:22:04 -0700] Loaded configuration file "/private/etc/cups/cupsd.conf"
I [10/May/2006:15:22:04 -0700] Configured for up to 100 clients.
I [10/May/2006:15:22:04 -0700] Allowing up to 100 client connections per host.
I [10/May/2006:15:22:04 -0700] Full reload is required.
I [10/May/2006:15:22:04 -0700] Full reload complete.
I [10/May/2006:15:22:04 -0700] Printer sharing is off and there are no jobs pending, will restart on demand. Exiting.
I [10/May/2006:15:23:02 -0700] Listening to 7f000001:631
ibook Mac OS X (10.4.3)

What was the solution?

Can I print from my iPhone and if so, how?

I just bought an iPhone, downloaded the iPhone guide and I thought I read that you can print from it? If so, how can you set it up-- I couldn't find anything in the settings to indicate this. Maybe it's just my imagination and I do have quite the imagination!! Lol

Using Air Print: http://support.apple.com/kb/ht4356

New HP Photosmart 7520 won't print from photo tray

EDIT: It will feed from the phototray if I print the photo from the Windows Photo Viewer. However, it still refuses to print straight from the jpg, even though I explicitly specify in all the settings that I want to print a 4x6 from the photo tray. Is this typical behavior? I assume it would print correctly from other photo editing and viewing software, but haven't checked that yet so cannot be certain. PREVIOUS POST: I just got this printer, and cannot make it print from the photo tray. It printed from the phototray during the installation and setup, but that was the only time. The rest of the time, when I try to print a picture, it only selects from the regular paper tray. Is there some magical procedure involved? I have a Windows 7 operating system, and just installed everything from the HP site. I uninstalled and reinstalled, but still it doesn't work. I load a sheet in the phototray, make sure the correct printer is set, select the paper size (in this case 4x6in, the sample photo paper that came with the printer), select HP Everyday Photo Paper, Glossy, click Print, and the printer ignores the phototray and prints from the regular paper tray. I have scoured the web and the answers provided do not solve the problem. This is very frustrating. If I cannot get this resolved in another day or two, I will be returning this printer and will try a different brand.

I have already looked at that link and tried all the things I can try at home, aside from replacing the print heads. Nothing works. The magenta seems to be the biggest offender. When I print photos that have a lot of magenta in them, I also get the horizontal lines, so it is not just the regular paper used by the printer's quality report (my first suspicion, sadly proven wrong). I see now that this printer also cuts off the image when printing a borderless photo. I have not found a solution for that yet, either. It also went crazy in the middle of a print job (told me that I needed to power it off, lost its wireless connection, regained its connection, but would not talk to the computer). I had to turn it off and on again to reset it, and after that it seemed to print, at least. This printer has been a very expensive mistake, considering the ink and paper I have gone through in the past week. I have four days to decide if I want to return it and just eat the cost of the ink cartridges. I am seriously considering it at this point, but will try to work things out for another day or two.

Help - photos are not printing from photo tray uToshiba Laptop

Hello,
I just got a new toshiba satellite laptop and when I try to print photos using the glossy photo paper in the photo tray, it keeps pulling from the regular paper tray. I have tried selecting all kinds of the HP paper, but it still prints out on regular paper. I also have a desktop and I have the exact same settings as that and the desktop pulls from the photo tray but the laptop doesn't. Can anyone help?
Thanks so much,
Shelly

If you are unable to print photos, the first thing that comes to mind is that you have the wrong tray selected. I would start with Solution 4 of this document for a walk-through on how to setup the photo tray. I know you are not experiencing an out of paper error message but it covers all of the steps you would take to print to the photo tray. This printer has ePrint. Have you set that up yet? I am curious because I want you to try to email the printer an attachment of your photo because ePrint photos default to 4x6 and go straight to the paper tray. This test will narrow down to if this is a printer problem or a setting in your computer. Read through that link and let me know if it helps or not. If not, how is the printer connected to the computer and what kind of computer are you using?
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

B210a Unable to Print from Photo tray

I have recently purchased a Photosmart Plus B210a. However, I am unable to print photos from the photo tray even though I have set the printer properties to do so. It repeatedly tries to print from the main paper tray. Can anyone help???

Hello,
As far as I understood you noticed that unable to print with device due to not pick up or feed paper from the Photo Tray.
Please try to perform the following TS steps at link;
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02686262&cc=us&lc=en&dlc=en&product=4021935&tmp...
hope it helps,
Take it easy,
Say "Thanks" by clicking the Kudos Star in the post that helped you
Although I work for HP,my posts and my replies are my own
please mark the post that solves your problem as "accepted solution"

HP 6510 & Windows 8.1 - how to print from photo tray?

Hello
After update to Windows 8.1 [Dreamspark] I loose some print options.
Now i can't change paper size when i choose photo tray in drivers.
Photo tray works, the printer normally prints the images such as the ePrint or from the panel on the printer, but not from Windows 8.1.
This is how it look:

You don't help, beacouse its Windows 8.1 (RTM) version from school.
I have Dreamspark licence for Windows 8.1 - like developers.
So, HP don't support for windows 8.1? Hah, nice...

Why wont my HP All In One C5280 printer print from photo tray after upgrade- vista to windows 7?

I recently downloaded an upgrade for windows home premium. Used to have Vista. Now my HP C5280 All In One printer will not print from the photo tray when settings are correctly set. This is after I ran HP Update. What do I do next.

I would try running the HP Print Diagnostic Utility. Go to http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-91788-1&lc=en&dlc=en&cc=us&...= and see what part fails.
The PDU checks the connectivity, spooler condition, online status, device manager, print queue, ports, driver, conflicts, and default printer.
Although I am an HP employee, I am speaking for myself and not for HP.
If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

Can't print from photo tray and can't set my usual margins

Similar Messages

Maybe you are looking for