Can't print from Windows 8 through Airport

Recently added a Windows 8 pc to my Airport network. After loading Bonjour to the PC, it finds the printer. However, it does not print a test page properly, just a single line about HP-PCL XL;3;0, etc, then blank sheets. Ideas?

Wrong print driver?
Try it with the printer plugged directly into the computer. If it works ok there then it should be ok via the network.

Similar Messages

Can't print from Windows....

Using Windows 7 over Parallels Desktop, I can't print from Windows applications....
The driver was download, but Windows keep asking to connect printer.

Hi,
since Parallels is not an Apple product it would be better to ask such questions in the Parallels support forum.
Nonetheless:
using Printers: http://kb.parallels.com/en/4990
Regards
Stefan

Running windows on imac can't print from windows

I'm running windows on my imac because quicken and quickbooks for mac *****. I can't print from windows. when I go to the printer troubleshooter it sees my printer but tells me to turn it on. When I try to print from quickbooks or quicken, it gives me a printer communication error. help

There have been some patches from Quicken to address these issues, make sure you have the latest updates. Quicken says only Quicken 2010 is supported in Windows 7 but suggests the following workaround.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Can't print from Windows to Mac

I've always had trouble printing to a printer attached to my Mac from Windows. Bonjour used to see the printer, but I could only occasionally actually print. For a while everything but PDFs worked, then even text stopped. As a last resort I tried the "reset printing system" option in System Preferences and then re-added the printer, but now Bonjour doesn't see it at all. I can browse to it via SMB at \\macname\printername, but all I can do is print a test page as Administrator. Regular print jobs and non-admin test pages just disappear - not in the queue on either client or server. Setting it up as an IPP printer instead didn't help.
I'm at the end of my rope here, and any troubleshooting tips are welcome. I'm an IT guy, so technical details are very welcome: TCP ports to check for listeners on, services to look for, registry settings on the Windows end, anything.
Details:
Server:
Mac OS X 10.6.2
HP Photosmart D7560 printer connected via USB using HP Photosmart driver
Clients:
Windows XP, Windows Vista (32-bit), Windows 7 (32-bit and 64-bit)
All on the same LAN (wireless), no trouble with TCP/IP connectivity (can ssh into the Mac from the Windows boxes, etc). Both Windows Firewall and UAC are turned off on the Vista/7 boxes, guest access is enabled on the Mac in Sharing preferences...
Any help welcome.
Thanks!

I followed the instructions at http://www.ifelix.co.uk/tech/3012.html and am having the same issue. Whether setting up manually or using Bonjour, it seems that you have to select an Apple Driver. The problem is that the Windows 7 does not provide Apple drivers. Luckily, I have an old XP installation CD so I can access the printer drivers I need, but because I already installed the printer drivers from my printers CD Windows will automatically install with that driver, not giving me the "have disk" option.
So I tried to install with Bonjour again, which allowed me to pull up the drivers from teh XP installation disk, but then gave me an error that I didn't have permissions to install the selected printer.
So I deleted the Canon driver for my printer from Windows 7 and went through the process described at http://www.ifelix.co.uk/tech/3012.html again. This time I was able to select the Apple Color Laserwriter printer from the XP installation CD, but I got an error message saying that Windows was unable to find an appropriate driver.
At this point, after a couple hours trying to do a simple file share, which should only take 30 seconds, I'm giving up being able to print to a printer connected to a mac from my Windows 7 laptop. Now I have to open files on the mac from the network file share to print.
Mixed having both Macs and Windows machines on the same network is a recipe for a headache.

Can't print from Windows Explorer

After installing the "HP Officejet Pro 8600 e-All-in-One Printer - N911a", on a Windows 7 64-bit PC, that is Ethernet connected, I get the following error message:
Script Error
An error has occurred in the script on this page.
Line: 2061
Char: 1
Error: Invalid procedure call or argument
Code: 0
URL: res://ieframe.dll/preview.js
When I try to print from Windows Explorer; however, I can print from other applications such as Word and Quicken OK, and I can print from Explorer OK from a Windows XP PC. Anyone have any suggestions?

The issue is caused when Windows creates the printer profile in the control panel that it doesn't correctly create it with the drivers.
We're not going to completely uninstall all the HP software, instead we're going to remove the corrupt Windows printer profile and reinstall it. Total time for this on an average computer is about 5-10 minutes to completely repair (including reboot).
1) Navigate to Start Menu > Devices and Printers or Start Menu > Control Panel > Printers
2) Select each printer profile for the printer with an issue, then select remove device/printer.
3) Reboot
4) Navigate to Start Menu > All Programs > HP > insert model # here > Add Printer (or Setup Wizard)
5) Follow the setup prompts to reinstall the printer profile and it recreates the Windows printer.
6) Test by printing google.com (uses very little ink when the test page comes out).
Let me know if you have any questions or issues.
Thanks,
Dan
I work for an internation tech company and personally perform thousands of computer repairs a year. I'm based out of the US working for a US company, and have been working on computers for over 13 years.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Can't print from Windows XP

I'm a new Mac user with a MacBook Pro, and found I needed to run Windows for a couple of applications so installed Parallels. All applications run fine, except printing from Windows. Have a Canon Pixma MP480 printer at home, and an HP Deskjet at the office. Both print fine from Mac, but no luck from Windows at all. I've tried to troubleshoot the configuration in Parallels, and everything seems set up correctly as far as I can tell (I'm not very tech oriented, though). I have the feeling that there is something very basic that I have missed. Anyone have thoughts on what it might be?

Please post Parallels related questions on the Parallels forums as Apple discussions only provide support for Apple products:
http://forums.parallels.com

HP Laserjet 1020 connected to Airport Express - Can't Print from Windows XP

Hi,
I have been using Airport Express for almost a year now, and it works fine with my old LaserJet 1200 connected to it, meaning that BOTH my ThinkPad(WinXP) and PowerBook(OSX 10.3) prints off the printer nicely. Last week I bought a LaserJet 1020 to replace the old printer. Now I can only print off my Mac, and not the ThinkPad.
Here are some additional information:
- Airport Express has been updated with latest updates.
- Using newest printer driver available from the HP website.
- New printer works when connected to ThinkPad via USB.
- New printer works when connected to Airport Express and printing performed using my PowerBook.
Therefore, My conclusion is that Airport Express and Printer is working just fine, and that it's just my ThinkPad not being configured correctly. (Although at the back of my head I am guessing that just MAYBE it's the Airport Express not accepting a different printer)
This is what I did to install the printer from my ThinkPad to work with Airport Express (which is not working):
1. Add a printer
2. Local printer attached to computer (no auto detect)
3. Selected existing TCP/IP port 10.0.1.1
4. Selected my new printer driver
5. Finish
I also tried a few things like:
- Deleting the TCP/IP port and creating it again before installing the new printer again.
- Off both airport express and printer and on again after about 10sec.Airport was on first, and after the LED turn green, printer was turned on and USB plugged into airport.
- Restarting my ThinkPad.
I have tried everything that I can think of, and nothing worked... hence this posting to get professional help.

Hi,
You might want to download and install bonjour for windows to your Thinkpad it is how I got my roomates XP laptop to print on AX.

Can't print from Windows PC to printer on I-Mac USB over wireless network

I am a brand new Mac user after years of Windows frustration.
Canon i9100 connected to I-Mac via USB. Prints OK from I-Mac. Print share enabled. Windows share enabled.
I-Mac on wireless LAN with static IP addresses for all devices.
Dell Windows XP on same wireless LAN.
Can ping I-Mac OK.
Added printer on Dell through Windows XP using I-Mac static IP address and I-Mac printer name - installed OK, but will not print.
After hours on Apple Support, found and downloaded Bonjour for Windows and installed on Dell. Ran Bonjour on Dell, installed printer OK, but still won't print from Dell.
Very frustrating and I haven't started on my VPN issues yet - thought Apple would be far simpler.
Wotto
I-Mac Intel Mac OS X (10.4.5) Dell Inspiron Windows XP

On Windows, after either method of setup, change the driver (on PC) to Apple Color LaserWriter. Apple print queues expect postscript as input.
If this is unsatisfactory, you can create a RAW queue on the Mac (only for sharing the printer, because it will have no driver associated):
http://www.stocksy.co.uk/2004/03/printingto_103x_pantherwith.php
(This guide mistakenly says it doesn't apply to Tiger - but it DOES)

Can't print from Windows laptop to HP printer on extreme base station

I have an IMAC Power PC as a Home computer. I use a an airport extreme as my wireless router. I have an HP Deskjet1220 C connected via USB to the Base station. I can print from the IMAC but can't from my windows based laptop. I have downloaded bonjour but I cant see the printer there. I also called Apple support and they sent me 2 files. I dont have the airport software on the Windows machine its on the IMAC. The instructions showed me how to add by Start-printerfaxes, add printer, local printer, deselect auto detect, create new port, std tcp/ip, then put in 10.0.1.1.
Thats where it ALL STOPS the port is in use? Apple cant help me cause its windows machine, Microsoft is the same? Help??

You may find the following iFelix article helpful.
The following Apple articles should prove helpful as well:
- http://docs.info.apple.com/article.html?artnum=107998
- http://docs.info.apple.com/article.html?artnum=107418

How to setup HP LaserJet 1320 to print from Windows using Airport Express

My situation was that I could print locally when the printer was directly plugged into the computer's USB port but when I tried to print through the Airport Express (with the printer plugged into the AEBS USB port) nothing would happen. (I could print fine from my MacBook Pro, just not from any Windows machine.)
It seems (although I'm still not quite sure why) that the issue was with the port address created by the Bonjour for Windows wizard.
The following worked like a charm:
http://discussions.apple.com/thread.jspa?threadID=1688294

I don't think it answers the original question. PrintCentral, according to the description you are pointing to print
s to:
1) most wireless printers (he's got a network printer, I assume a wired one)
Works just fine on my 2 Ethernet network printers.
2) all printers via a Mac. This option although useful looks a bit strange. If I have to have a Mac on all the time, I would use it to view stuff and print from there. No need for an iPad.
Not sure why you would want to use this option if you want to print directly from the iPad to a printer. My wife's iPad prints to either network printer just fine when my Mac laptop is shut down.
Looking for a solution myself... We need CUPS for iPad!
You might want to let Apple know.
Apple - iPad - Feedback

Officejet 6000 computer connected to windows 7. Can't print from windows XP laptop

Printer connected by USB to the Windows 7 desktop. Printing is fine. I have both computers on the same workgroup network, file sharing is ok. My laptop finds the printer on the network, but there is apparently a driver problem. The disc that came with the printer will only install on XP and Vista, so downloaded the drivers for the new windows 7 desktop. I either get a "Failed to Print" message or "The handle is invalid". When I tried to connect with the printer through network sharing, and tried to open it, I was told the wrong drivers were located on the server. It looked for a file with *.inf. Do I hve the wrong drivers on the desktop or do I need to install the drivers on the laptop? I never had this problem with my old Vista desktop.
This question was solved.
View Solution.

If it is not wireless it is USB connected. So you need to choose USB connected and let the program do it's thing. Are you trying to share the printer from the desktop to the laptop? If yes, just go to Add Printer and follow the instruction. Make sure File and Print Sharing is enabled on the desktop.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Can't print from windows to shared Canon MX340

I have a new Canon MX340 on my iMac with Snow Leopard. I'm able to print from this iMac and via sharing, all of the other Macs at home. What I can't do is print from my son's Windows XP netbook. Previously, I was sharing an old HP office jet with no problem, with the new Canon one of two things happens. I used Bonjour to install the printer on the XP side.
- with Generic Postscript selected as the driver I get the following erros in the cups error_log file
E [29/Aug/2010:17:08:37 -0600] [Job 920] No %%Pages: comment in header!
E [29/Aug/2010:17:08:37 -0600] [Job 920] Unable to open raster stream - : No such file or directory
E [29/Aug/2010:17:08:37 -0600] [Job 920] No pages found!
E [29/Aug/2010:17:08:37 -0600] [Job 920] Job stopped due to filter errors; please consult the error_log file for details.
- using the MX340 driver, I simply get a single blank page
I am able to print via a network connection (the MX340 has built in WiFi), but I'd like to know how to do with via the old method.
Any ideas?
THANKS!

The XP Netbook should use the Generic PS driver. I've never found the Canon driver on Windows to work correctly when printing to the Mac shared printer via Bonjour for Windows.
It is unusual you are getting this error. The Mac should be converting the incoming spool file to suit the MX340. Since the Generic PS is not working then you could try the Apple Color LaserWriter 12/600 when using the Bonjour Wizard. I've used this on XP to print to my MP980 shared off 10.6.4 and it worked fine for me.
Personally I would suggest you are better off with using the MX340 wireless. This will remove the reliance on the iMac being available just so that others can print.

Can't Print from Windows Vista Notebook to Printer installed in Mac Mini

I have a home network that is connected to the internet by DSL. My Printer Xerox Phaser 3115 is installed to the Mac Mini.
From my Vista Notebook, I can see the printer shared by my Macmini. However, I can't print coz the printer says "access denied". I installed this Bonjour for Windows in order to print but it says "No Bonjour Printers are available".
Please help me! Thanks!

On Windows, after either method of setup, change the driver (on PC) to Apple Color LaserWriter. Apple print queues expect postscript as input.
If this is unsatisfactory, you can create a RAW queue on the Mac (only for sharing the printer, because it will have no driver associated):
http://www.stocksy.co.uk/2004/03/printingto_103x_pantherwith.php
(This guide mistakenly says it doesn't apply to Tiger - but it DOES)

Can't print from Macbook via Airport Extreme.

I have just got myself a White Macbook and have it connected to my Airport Extreme. I already have an imac connected and everything is working fine internet wise but if I try and print from the macbook via the imac a window comes up saying 'Canon MP610 series @ newimac - connecting to xxxx-xxxxx-computer.local. on port631...' but nothing else happens. My firewall setting on the imac is at 'Allow only essential services'. If I change it to 'Allow all incoming connections' the printer works. I do have printer sharing switched on in both machines. Any help gratefully received. Thanks, Kevin

Try changing your firewall settings to set access for specific applications and services. This should allow printer sharing, while still keeping things blocked that you don't want.

How can I print from ipad2 via airport extreme to hp printer on USB.

Is there a way to get iPad2 to print via airport extreme to a non wireless hp printer?

Apple - iPad - Print right from your iPad with AirPrint.
Unfortunately, AirPrint will only work with AirPrint enabled HP printers.
Check the HP site. They may have an app available you can use for your USB / Airport printer.

Can't print from Windows 8 through Airport

Similar Messages

Maybe you are looking for