Can't print from Windows PC to printer on I-Mac USB over wireless network

I am a brand new Mac user after years of Windows frustration.
Canon i9100 connected to I-Mac via USB. Prints OK from I-Mac. Print share enabled. Windows share enabled.
I-Mac on wireless LAN with static IP addresses for all devices.
Dell Windows XP on same wireless LAN.
Can ping I-Mac OK.
Added printer on Dell through Windows XP using I-Mac static IP address and I-Mac printer name - installed OK, but will not print.
After hours on Apple Support, found and downloaded Bonjour for Windows and installed on Dell. Ran Bonjour on Dell, installed printer OK, but still won't print from Dell.
Very frustrating and I haven't started on my VPN issues yet - thought Apple would be far simpler.
Wotto
I-Mac Intel Mac OS X (10.4.5) Dell Inspiron Windows XP

On Windows, after either method of setup, change the driver (on PC) to Apple Color LaserWriter. Apple print queues expect postscript as input.
If this is unsatisfactory, you can create a RAW queue on the Mac (only for sharing the printer, because it will have no driver associated):
http://www.stocksy.co.uk/2004/03/printingto_103x_pantherwith.php
(This guide mistakenly says it doesn't apply to Tiger - but it DOES)

Similar Messages

Printing from windows xp to printer on aeb

I have a network set up using an airport extreme basestation which provides internet access to a powerbook and a pc laptop running xp.
this works flawlessly.
I also have a canon ip3000 printer connected to the basestation which i want to use from both computers.
of course from the mac this was a matter of 2 clicks and it worked.
on the pc, i've spent about an hour going through a gazillion windows, holding the machine's hands every step of the way, downloading drivers it couldn't find and so on. i followed instruction on ifelix http://www.ifelix.co.uk/tech/1004.html step by step. there were no errors while doing this and everything seemed to work.
now when i set the pc to print a test page at the end of the installation process, it does starts spooling and cueing the page and after about 10 seconds complains "the printer is not responding".
meanwhile, the printer _IS responding and is starting to print the page!
windows then decides - obviously after it has sent about a 3rd of the first page - to _re-start printing - this is NOT something i have told it to do - and complains again "printer not responding"...
after about 3 or so attempts, each of just over a 3rd of a page in length, i have 2 pages of garbage and windows claiming that the printer doesn't respond....
does this sound familiar to anyone?
does anyone have any pointers on how to solve this?

was offline for a while - hence the delay in replying to this.
thanks for your help so far
today i reinstalled the printer driver from scratch with the printer connected directly to the computer
Does the printer work correctly when directly connected to the PC?
yes it does. flawlessly.
Are you using the correct driver?
yes and latest version of it - freshly downloaded today from the manufacturers site
It should be noted that some printer drivers were never designed to work unless the printer was connected directly.
the printer in question is a canon pixma ip 3000 - according to the compatibility list on your site it was added by apple as being compatible...
Bonjour/Rendezvous shouldn't make a difference, but you may want to try it.
at least it takes away m$ insanity in installing drivers and proves the point that interface design __can be done properly, even under windoze... :)))
the problem that i have at the moment is as follows;
the printer works perfectly when connected directly to the pc.
when connected to the basestation, i use bonjour to find it and install the printer driver (which was already installed in the system to get the printer working when connected directly to the computer, now i just create a new setup for use with the basestation.)
I click "print test page". the printer starts printing, at about 1/3rd of the page it stops and waits. after a while (between half a minute and one minute) the page is ejected by the printer and it starts a new attempt to print the page - note: i did NOT instruct it to do so after the initial "print test page" click.
this second page is printed till about 60 or 70%, after which a 3rd attempt is made at re-printing the page, this time without a page-feed continuing on the second sheet of paper. at the end of that sheet, the computer complains that the test print has failed. in true windows fashion, it does not provide any feedback of what has actually gone wrong.
somehow i have the idea that the software is expecting some kind of acknowledgment from the printer that it has started or maybe even a progress report at regular intervals. and somehow this doesn't seem to come through...
but this is pure guessing - i have no further data to support this other than the sequence of events described above, which is consistent and repeated at every print attempt
if anyone has any suggestions on what to try next, that would be more than welcome
thanks again

When I open Mozillz I get the error "The connection was reset". I can get online using Windows Exporer to my laptop is connected to my wireless network.

I am using Windows8 on my laptop.

You can check the target line in the Firefox desktop shortcut (right-click: Properties) to make sure that nothing is appended after the path to the Firefox program.
Can you start Firefox in <u>[[Safe Mode|Safe Mode]]</u> by holding down the Shift/Options key?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Can't print to Windows 7 shared printer from Mac OS Lion

Dear all,
I would like to share my experience battling to figure out how to print to Windows 7 shared printer from Mac OS Lion. Myself had this problem and looking throughly in internet without success. But finally I figured out the solution by myself, hope this can help other Mac user with similar problem.
OK, when I try to setup my new MacBook Pro with OS Lion to connect with my Canon MX308 printer attached to desktop with Windows 7 Ultimate,
1. I simply select System Preferences>Print & Scan.
2. Then looks for the + sign just below the box to add a new printer.
3. From the option toolbar above, I select Windows. I have connect this MacBook with my Windows Network, so the workgroup will appear to the left column.
4. After I select this group, the computer list will appear in the middle column
5. Then after I select the computer which my printer connected to, my printer sharename will appear in the right column
6. Last step is to select the printer I want to use.
7. After that it will automatically put your printer sharename to the "Name". And then I select my printer driver at "Print Using" and find my printer manufacturer which is Canon MX300 series from driver lists. Finish!
My printer appear in the Printers List. But the problem is everytime I try to print there will be error message saying "ON HOLD Authentication Required".
This problem start to kill me, I search all around for similar problem, but the solution was never worked for me!
Until just now I figured out accidentally for the solution.
THE PROBLEM LIES ON MY PRINTER DRIVER!!!! Although I have downloaded the most update driver from Apple site and Apple Software update said there is no more update for my system!
The solution for my problem is Gutenprint Printer Driver! You can download this driver at http://gimp-print.sourceforge.net/MacOSX.php, then select for the latest driver gutenprint-5.2.7.dmg. Install this driver!
Then back to Print & Scan in System Preferences, then right click on Printers List box, then choose "Reset Printing System..." to clear the previous failed printers.
After that, repeat the above step 2 - 7. Only for the last step I need to select the Printer Driver for my Canon MX308 for the driver name : "Canon PIXMA MX300 - CUPS+Gutenprint v5.2.7"
Now I can sleep as a baby knowing that my printer make a friend with my new Macbook Pro! Hope this will help others!

I have the same setup but with a Canon MX850. This did not fix my problem.

I can no longer print from windows pc via mac/time machine in lion. Does anyone know why, I can no longer print from windows pc via mac/time machine in lion. Does anyone know why

I can no longer print from windows pc via mac/time machine in lion. Does anyone know why or how to fix? I have print sharing ticked and printer is HP laser jest 2550.

I finally found a log file... unfortunately, it doesn't help me figure out what's wrong... but maybe it will mean something to one of you?
I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding start banner page "none".
I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding job file of type application/postscript.
I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding end banner page "none".
I [10/Dec/2007:20:23:35 -0500] [Job 11] Queued on "SUTTER_WG" by "kristophermiller".
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/pstoappleps (PID 335)
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/pstocupsraster (PID 336)
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/rastertoepson (PID 338)
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started backend /usr/libexec/cups/backend/smb (PID 339)
E [10/Dec/2007:20:23:36 -0500] [Job 11] cgpdftoraster unsupported colorSpace: colorSpace = -1, colorOrder =1, bitsPerColor = 1
E [10/Dec/2007:20:23:36 -0500] [Job 11] cgpdftoraster: got an error from cupsRasterInterpretPPD
E [10/Dec/2007:20:23:36 -0500] [Job 11] No pages found!
E [10/Dec/2007:20:23:36 -0500] PID 338 (/usr/libexec/cups/filter/rastertoepson) stopped with status 1!
I [10/Dec/2007:20:23:36 -0500] Hint: Try setting the LogLevel to "debug" to find out more.
E [10/Dec/2007:20:23:36 -0500] [Job 11] Job stopped due to filter errors.

Can't print from Windows Explorer

After installing the "HP Officejet Pro 8600 e-All-in-One Printer - N911a", on a Windows 7 64-bit PC, that is Ethernet connected, I get the following error message:
Script Error
An error has occurred in the script on this page.
Line: 2061
Char: 1
Error: Invalid procedure call or argument
Code: 0
URL: res://ieframe.dll/preview.js
When I try to print from Windows Explorer; however, I can print from other applications such as Word and Quicken OK, and I can print from Explorer OK from a Windows XP PC. Anyone have any suggestions?

The issue is caused when Windows creates the printer profile in the control panel that it doesn't correctly create it with the drivers.
We're not going to completely uninstall all the HP software, instead we're going to remove the corrupt Windows printer profile and reinstall it. Total time for this on an average computer is about 5-10 minutes to completely repair (including reboot).
1) Navigate to Start Menu > Devices and Printers or Start Menu > Control Panel > Printers
2) Select each printer profile for the printer with an issue, then select remove device/printer.
3) Reboot
4) Navigate to Start Menu > All Programs > HP > insert model # here > Add Printer (or Setup Wizard)
5) Follow the setup prompts to reinstall the printer profile and it recreates the Windows printer.
6) Test by printing google.com (uses very little ink when the test page comes out).
Let me know if you have any questions or issues.
Thanks,
Dan
I work for an internation tech company and personally perform thousands of computer repairs a year. I'm based out of the US working for a US company, and have been working on computers for over 13 years.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Can't print from Windows XP

I'm a new Mac user with a MacBook Pro, and found I needed to run Windows for a couple of applications so installed Parallels. All applications run fine, except printing from Windows. Have a Canon Pixma MP480 printer at home, and an HP Deskjet at the office. Both print fine from Mac, but no luck from Windows at all. I've tried to troubleshoot the configuration in Parallels, and everything seems set up correctly as far as I can tell (I'm not very tech oriented, though). I have the feeling that there is something very basic that I have missed. Anyone have thoughts on what it might be?

Please post Parallels related questions on the Parallels forums as Apple discussions only provide support for Apple products:
http://forums.parallels.com

Can't print from Windows to Mac

I've always had trouble printing to a printer attached to my Mac from Windows. Bonjour used to see the printer, but I could only occasionally actually print. For a while everything but PDFs worked, then even text stopped. As a last resort I tried the "reset printing system" option in System Preferences and then re-added the printer, but now Bonjour doesn't see it at all. I can browse to it via SMB at \\macname\printername, but all I can do is print a test page as Administrator. Regular print jobs and non-admin test pages just disappear - not in the queue on either client or server. Setting it up as an IPP printer instead didn't help.
I'm at the end of my rope here, and any troubleshooting tips are welcome. I'm an IT guy, so technical details are very welcome: TCP ports to check for listeners on, services to look for, registry settings on the Windows end, anything.
Details:
Server:
Mac OS X 10.6.2
HP Photosmart D7560 printer connected via USB using HP Photosmart driver
Clients:
Windows XP, Windows Vista (32-bit), Windows 7 (32-bit and 64-bit)
All on the same LAN (wireless), no trouble with TCP/IP connectivity (can ssh into the Mac from the Windows boxes, etc). Both Windows Firewall and UAC are turned off on the Vista/7 boxes, guest access is enabled on the Mac in Sharing preferences...
Any help welcome.
Thanks!

I followed the instructions at http://www.ifelix.co.uk/tech/3012.html and am having the same issue. Whether setting up manually or using Bonjour, it seems that you have to select an Apple Driver. The problem is that the Windows 7 does not provide Apple drivers. Luckily, I have an old XP installation CD so I can access the printer drivers I need, but because I already installed the printer drivers from my printers CD Windows will automatically install with that driver, not giving me the "have disk" option.
So I tried to install with Bonjour again, which allowed me to pull up the drivers from teh XP installation disk, but then gave me an error that I didn't have permissions to install the selected printer.
So I deleted the Canon driver for my printer from Windows 7 and went through the process described at http://www.ifelix.co.uk/tech/3012.html again. This time I was able to select the Apple Color Laserwriter printer from the XP installation CD, but I got an error message saying that Windows was unable to find an appropriate driver.
At this point, after a couple hours trying to do a simple file share, which should only take 30 seconds, I'm giving up being able to print to a printer connected to a mac from my Windows 7 laptop. Now I have to open files on the mac from the network file share to print.
Mixed having both Macs and Windows machines on the same network is a recipe for a headache.

Can't print from Windows....

Using Windows 7 over Parallels Desktop, I can't print from Windows applications....
The driver was download, but Windows keep asking to connect printer.

Hi,
since Parallels is not an Apple product it would be better to ask such questions in the Parallels support forum.
Nonetheless:
using Printers: http://kb.parallels.com/en/4990
Regards
Stefan

NOT PRINTING FROM WINDOWS 7 TO MY PHOTOSMART c7180 ALL-IN-ONE (I CAN SEE MESSAGES IN QUEUE)?

CANNOT PRINTING FROM WINDOWS 7 TO MY PHOTOSMART c7180 ALL-IN-ONE (I CAN SEE MESSAGES IN QUEUE)?

Hi,
I think you need to remove the queue. Please try:
    hold down the Windows key and press R.
    from the Run window, type services.msc and hit enter.
    if the machine asks for Admin you have to accept this,
    look down to the print spooler service, right click it and select properties
    click on the Stop button,
    browse to C:\Windows\System32\Spool\printers
    delete the job inside this folder
    reboot the machine
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Running windows on imac can't print from windows

I'm running windows on my imac because quicken and quickbooks for mac *****. I can't print from windows. when I go to the printer troubleshooter it sees my printer but tells me to turn it on. When I try to print from quickbooks or quicken, it gives me a printer communication error. help

There have been some patches from Quicken to address these issues, make sure you have the latest updates. Quicken says only Quicken 2010 is supported in Windows 7 but suggests the following workaround.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

[solved]printing from Windows 7 to ArchLinux server.

I have read https://wiki.archlinux.org/index.php/CU … er_sharing
but cannot recognizing my printer from Windows 7 machine. I have added the workgroup in smb.conf but i don't know if should i put the password and where, i can go from w7 to archLinuxhost:631 and send a test page to print, but i cannot add to w7 the printer.
Last edited by fpilee (2012-11-14 13:09:01)

solved follow the steps from https://wiki.archlinux.org/index.php/CU … er_sharing
then go to localhost:631 and share the printer,
next go to the w7 machine and browse in the navigator archLinuxMachineIP:631 and copy the URL for the printer in printers tabs,
then add on w7 this url and select the driver.
you have to add a address reservation in your router to the machine with the printer,
Last edited by fpilee (2012-11-14 13:11:17)

Cannot print from Windows XP in Boot Camp

I rarely boot into Windows using Boot Camp. Usually will use Windows as a VM with VMware Fusion.
Now I am unable to print when in Windows/Boot Camp!
Yes, I can print just fine in Mac & in Windows as a VM.
My Boot Camp installation of WinXP is the same one I use as a VM.
I wonder if I changed some printer setting long ago & forgot. I am fairly certain I used to be able to print from Windows/Boot Camp.
From: Windows XP/Control Panel/Printers & Faxes/My printer/properties/Ports
The last port/box in the list is checked, “TPVM: ThinPrint Print Port for VM”
I thought this may be incorrect for when I am in Windows using Boot Camp so tried changing it to LPT1 & then LPT2 & LPT3 & no real help. However, when using
TPVM: ThinPrint Print Port for VM, When I attempt to print, nothing happens & no print job appears in the print queue. (See what’s printing) If I change the port to LPT1,2 or 3, than the job DOES appear & under status says “error.”
I think I need to change some setting when I boot into Windows via Boot Camp vs. Start Windows as a VM.
What is the problem?
Thanks!

Thanks but, no help.
I did set up printer sharing. Even though I only have one computer I still share the printer between the Mac & WIndows on the Mac in both VM & BC.
On Mac: System Preferences/Print & Fax, I do have the box checked “Share this printer on the network.” Under Sharing Preferences I have checked; Printer sharing, Scanner sharing & file sharing. Users: Everyone Can Print.
If I remember correctly, b4 I had set up printer sharing, I was unable to print from Windows as VM. It would send the print job over to the Mac side & would not print. Then I used to go into the sys tray on Windows & change something re the printer (I forget what) but essentially telling Windows to use this printer or activate it. Then when finished -- If I forget to undo that change, it would not print on the Mac side. Setting the printer to share fixed that so, I can easily print Mac or Windows VM. Again, I very rarely boot into Windows/BC but I would like to be able to print when I do.
It may be similar to use of the optical drive for DVDs/CDs. If I am in Windows/VM The Drive doesn't work until I go into some menu (Virtual Machine?) & enable the drive & then I must disable it to get it back working for Mac.
I am going to try DVD & CD sharing & see if that fixes it so I can use the drive in both Mac & Windows VM w/o having to bother to change settings back & forth, Then I will see if doing that somehow breaks the DVD/CD drive for Windows/BC.
Maybe I need to uncheck printer sharing in order for the printer to once again work on Windows/BC?
Or maybe since I enabled printer sharing, I must somehow tell my Mac or tell Windows that all 3 can share; Mac, Windows/VM & Windows BC? I’m sure if I had 3 different computers I would need to somehow tell the system which computers are authorized to use my Network printer. Maybe since Windows BC is never online/running at the same time as the Mac, it was not recognized?

I am trying to print from iphoto to my printer. When I click print on under File tab it says that a theme cannot be found and that a theme needs to be intalled? Why is this window popping up and how I install a "theme" on iphoto?

I am trying to print from iphoto to my printer. When I click print on under File tab it says that a theme cannot be found and that a theme needs to be intalled? Why is this window popping up and how I install a "theme" on iphoto?

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

Is it possible to print from Windows 8.1 to a printer connected to the USB port on an Airport Express?

Is it possible to print from Windows 8.1 to a printer connected to the USB port on an Airport Express?
a) HP printer with USB port only (no ethernet port) connected to Airport Express
b) No issue printing from Macs
Tests
1) Installed Bonjour 2 - does not find printer (now uninstalled)
2) Bonjour 3 is listed in programs but no way to access
3) Using TCPIP address (and no Bonjour) gives 'Unsupported Personality' error when printing test page
Regards
Richard
p.s. why are all Windows 8.1 questios n the forum 'Locked' with no reply?

This is possible, but not with Bonjour or any other fixes. It is just a printer set up based on the Port name of the Airport, 10.0.1.1.
I found the answer on YouTube, Title: Windows Printing For Apple AirPort Extreme without Bonjour Wireless wifi.

Can't print from Windows PC to printer on I-Mac USB over wireless network

Similar Messages

Maybe you are looking for