Can't print from Windows....

Using Windows 7 over Parallels Desktop, I can't print from Windows applications....
The driver was download, but Windows keep asking to connect printer.

Hi,
since Parallels is not an Apple product it would be better to ask such questions in the Parallels support forum.
Nonetheless:
using Printers: http://kb.parallels.com/en/4990
Regards
Stefan

Similar Messages

  • Running windows on imac can't print from windows

    I'm running windows on my imac because quicken and quickbooks for mac *****.  I can't print from windows. when I go to the printer troubleshooter it sees my printer but tells me to turn it on.  When I try to print from quickbooks or quicken, it gives me a printer communication error.  help

    There have been some patches from Quicken to address these issues, make sure you have the latest updates.  Quicken says only Quicken 2010 is supported in Windows 7 but suggests the following workaround.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Can't print from Windows Explorer

    After installing the "HP Officejet Pro 8600 e-All-in-One Printer - N911a", on a Windows 7 64-bit PC, that is Ethernet connected, I get the following error message:
    Script Error
    An error has occurred in the script on this page.
    Line: 2061
    Char: 1
    Error: Invalid procedure call or argument
    Code: 0
    URL: res://ieframe.dll/preview.js
    When I try to print from Windows Explorer; however, I can print from other applications such as Word and Quicken OK, and I can print from Explorer OK from a Windows XP PC. Anyone have any suggestions?

    The issue is caused when Windows creates the printer profile in the control panel that it doesn't correctly create it with the drivers.
    We're not going to completely uninstall all the HP software, instead we're going to remove the corrupt Windows printer profile and reinstall it.  Total time for this on an average computer is about 5-10 minutes to completely repair (including reboot).
    1) Navigate to Start Menu > Devices and Printers or Start Menu > Control Panel > Printers
    2) Select each printer profile for the printer with an issue, then select remove device/printer.
    3) Reboot
    4) Navigate to Start Menu > All Programs > HP > insert model # here > Add Printer (or Setup Wizard)
    5) Follow the setup prompts to reinstall the printer profile and it recreates the Windows printer.
    6) Test by printing google.com (uses very little ink when the test page comes out).
    Let me know if you have any questions or issues.
    Thanks,
    Dan
    I work for an internation tech company and personally perform thousands of computer repairs a year. I'm based out of the US working for a US company, and have been working on computers for over 13 years.
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

  • Can't print from Windows XP

    I'm a new Mac user with a MacBook Pro, and found I needed to run Windows for a couple of applications so installed Parallels. All applications run fine, except printing from Windows. Have a Canon Pixma MP480 printer at home, and an HP Deskjet at the office. Both print fine from Mac, but no luck from Windows at all. I've tried to troubleshoot the configuration in Parallels, and everything seems set up correctly as far as I can tell (I'm not very tech oriented, though). I have the feeling that there is something very basic that I have missed. Anyone have thoughts on what it might be?

    Please post Parallels related questions on the Parallels forums as Apple discussions only provide support for Apple products:
    http://forums.parallels.com

  • Can't print from Windows to Mac

    I've always had trouble printing to a printer attached to my Mac from Windows. Bonjour used to see the printer, but I could only occasionally actually print. For a while everything but PDFs worked, then even text stopped. As a last resort I tried the "reset printing system" option in System Preferences and then re-added the printer, but now Bonjour doesn't see it at all. I can browse to it via SMB at \\macname\printername, but all I can do is print a test page as Administrator. Regular print jobs and non-admin test pages just disappear - not in the queue on either client or server. Setting it up as an IPP printer instead didn't help.
    I'm at the end of my rope here, and any troubleshooting tips are welcome. I'm an IT guy, so technical details are very welcome: TCP ports to check for listeners on, services to look for, registry settings on the Windows end, anything.
    Details:
    Server:
    Mac OS X 10.6.2
    HP Photosmart D7560 printer connected via USB using HP Photosmart driver
    Clients:
    Windows XP, Windows Vista (32-bit), Windows 7 (32-bit and 64-bit)
    All on the same LAN (wireless), no trouble with TCP/IP connectivity (can ssh into the Mac from the Windows boxes, etc). Both Windows Firewall and UAC are turned off on the Vista/7 boxes, guest access is enabled on the Mac in Sharing preferences...
    Any help welcome.
    Thanks!

    I followed the instructions at http://www.ifelix.co.uk/tech/3012.html and am having the same issue. Whether setting up manually or using Bonjour, it seems that you have to select an Apple Driver. The problem is that the Windows 7 does not provide Apple drivers. Luckily, I have an old XP installation CD so I can access the printer drivers I need, but because I already installed the printer drivers from my printers CD Windows will automatically install with that driver, not giving me the "have disk" option.
    So I tried to install with Bonjour again, which allowed me to pull up the drivers from teh XP installation disk, but then gave me an error that I didn't have permissions to install the selected printer.
    So I deleted the Canon driver for my printer from Windows 7 and went through the process described at http://www.ifelix.co.uk/tech/3012.html again. This time I was able to select the Apple Color Laserwriter printer from the XP installation CD, but I got an error message saying that Windows was unable to find an appropriate driver.
    At this point, after a couple hours trying to do a simple file share, which should only take 30 seconds, I'm giving up being able to print to a printer connected to a mac from my Windows 7 laptop. Now I have to open files on the mac from the network file share to print.
    Mixed having both Macs and Windows machines on the same network is a recipe for a headache.

  • HP Laserjet 1020 connected to Airport Express - Can't Print from Windows XP

    Hi,
    I have been using Airport Express for almost a year now, and it works fine with my old LaserJet 1200 connected to it, meaning that BOTH my ThinkPad(WinXP) and PowerBook(OSX 10.3) prints off the printer nicely. Last week I bought a LaserJet 1020 to replace the old printer. Now I can only print off my Mac, and not the ThinkPad.
    Here are some additional information:
    - Airport Express has been updated with latest updates.
    - Using newest printer driver available from the HP website.
    - New printer works when connected to ThinkPad via USB.
    - New printer works when connected to Airport Express and printing performed using my PowerBook.
    Therefore, My conclusion is that Airport Express and Printer is working just fine, and that it's just my ThinkPad not being configured correctly. (Although at the back of my head I am guessing that just MAYBE it's the Airport Express not accepting a different printer)
    This is what I did to install the printer from my ThinkPad to work with Airport Express (which is not working):
    1. Add a printer
    2. Local printer attached to computer (no auto detect)
    3. Selected existing TCP/IP port 10.0.1.1
    4. Selected my new printer driver
    5. Finish
    I also tried a few things like:
    - Deleting the TCP/IP port and creating it again before installing the new printer again.
    - Off both airport express and printer and on again after about 10sec.Airport was on first, and after the LED turn green, printer was turned on and USB plugged into airport.
    - Restarting my ThinkPad.
    I have tried everything that I can think of, and nothing worked... hence this posting to get professional help.

    Hi,
    You might want to download and install bonjour for windows to your Thinkpad it is how I got my roomates XP laptop to print on AX.

  • Can't print from Windows PC to printer on I-Mac USB over wireless network

    I am a brand new Mac user after years of Windows frustration.
    Canon i9100 connected to I-Mac via USB. Prints OK from I-Mac. Print share enabled. Windows share enabled.
    I-Mac on wireless LAN with static IP addresses for all devices.
    Dell Windows XP on same wireless LAN.
    Can ping I-Mac OK.
    Added printer on Dell through Windows XP using I-Mac static IP address and I-Mac printer name - installed OK, but will not print.
    After hours on Apple Support, found and downloaded Bonjour for Windows and installed on Dell. Ran Bonjour on Dell, installed printer OK, but still won't print from Dell.
    Very frustrating and I haven't started on my VPN issues yet - thought Apple would be far simpler.
    Wotto
    I-Mac Intel   Mac OS X (10.4.5)   Dell Inspiron Windows XP

    On Windows, after either method of setup, change the driver (on PC) to Apple Color LaserWriter. Apple print queues expect postscript as input.
    If this is unsatisfactory, you can create a RAW queue on the Mac (only for sharing the printer, because it will have no driver associated):
    http://www.stocksy.co.uk/2004/03/printingto_103x_pantherwith.php
    (This guide mistakenly says it doesn't apply to Tiger - but it DOES)

  • Can't print from windows to shared Canon MX340

    I have a new Canon MX340 on my iMac with Snow Leopard. I'm able to print from this iMac and via sharing, all of the other Macs at home. What I can't do is print from my son's Windows XP netbook. Previously, I was sharing an old HP office jet with no problem, with the new Canon one of two things happens. I used Bonjour to install the printer on the XP side.
    - with Generic Postscript selected as the driver I get the following erros in the cups error_log file
    E [29/Aug/2010:17:08:37 -0600] [Job 920] No %%Pages: comment in header!
    E [29/Aug/2010:17:08:37 -0600] [Job 920] Unable to open raster stream - : No such file or directory
    E [29/Aug/2010:17:08:37 -0600] [Job 920] No pages found!
    E [29/Aug/2010:17:08:37 -0600] [Job 920] Job stopped due to filter errors; please consult the error_log file for details.
    - using the MX340 driver, I simply get a single blank page
    I am able to print via a network connection (the MX340 has built in WiFi), but I'd like to know how to do with via the old method.
    Any ideas?
    THANKS!

    The XP Netbook should use the Generic PS driver. I've never found the Canon driver on Windows to work correctly when printing to the Mac shared printer via Bonjour for Windows.
    It is unusual you are getting this error. The Mac should be converting the incoming spool file to suit the MX340. Since the Generic PS is not working then you could try the Apple Color LaserWriter 12/600 when using the Bonjour Wizard. I've used this on XP to print to my MP980 shared off 10.6.4 and it worked fine for me.
    Personally I would suggest you are better off with using the MX340 wireless. This will remove the reliance on the iMac being available just so that others can print.

  • Can't print from Windows laptop to HP printer on extreme base station

    I have an IMAC Power PC as a Home computer. I use a an airport extreme as my wireless router. I have an HP Deskjet1220 C connected via USB to the Base station. I can print from the IMAC but can't from my windows based laptop. I have downloaded bonjour but I cant see the printer there. I also called Apple support and they sent me 2 files. I dont have the airport software on the Windows machine its on the IMAC. The instructions showed me how to add by Start-printerfaxes, add printer, local printer, deselect auto detect, create new port, std tcp/ip, then put in 10.0.1.1.
    Thats where it ALL STOPS the port is in use? Apple cant help me cause its windows machine, Microsoft is the same? Help??

    You may find the following iFelix article helpful.
    The following Apple articles should prove helpful as well:
    - http://docs.info.apple.com/article.html?artnum=107998
    - http://docs.info.apple.com/article.html?artnum=107418

  • Can't Print from Windows Vista Notebook to Printer installed in Mac Mini

    I have a home network that is connected to the internet by DSL. My Printer Xerox Phaser 3115 is installed to the Mac Mini.
    From my Vista Notebook, I can see the printer shared by my Macmini. However, I can't print coz the printer says "access denied". I installed this Bonjour for Windows in order to print but it says "No Bonjour Printers are available".
    Please help me! Thanks!

    On Windows, after either method of setup, change the driver (on PC) to Apple Color LaserWriter. Apple print queues expect postscript as input.
    If this is unsatisfactory, you can create a RAW queue on the Mac (only for sharing the printer, because it will have no driver associated):
    http://www.stocksy.co.uk/2004/03/printingto_103x_pantherwith.php
    (This guide mistakenly says it doesn't apply to Tiger - but it DOES)

  • Officejet 6000 computer connected to windows 7. Can't print from windows XP laptop

    Printer connected by USB to the Windows 7 desktop.  Printing is fine.  I have both computers on the same workgroup network, file sharing is ok.  My laptop finds the printer on the network, but there is apparently a driver problem.  The disc that came with the printer will only install on XP and Vista, so  downloaded the drivers for the new windows 7 desktop.  I either get a "Failed to Print" message or "The handle is invalid".  When I tried to connect with the printer through network sharing, and tried to open it, I was told the wrong drivers were located on the server.  It looked for a file with *.inf.  Do I hve the wrong drivers on the desktop or do I need to install the drivers on the laptop?  I never had this problem with my old Vista desktop.
    This question was solved.
    View Solution.

    If it is not wireless it is USB connected.  So you need to choose USB connected and let the program do it's thing.   Are you trying to share the printer from the desktop to the laptop?  If yes, just go to Add Printer and follow the instruction.  Make sure File and Print Sharing is enabled on the desktop.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Can't print from Windows with Parallels off MacBookPro

    I'm printing to a new HP Photosmart C4100, of course the Mac
    side prints just fine. I've enabled print sharing on both sides.
    The Windows VM sees the printer and the "sharing hand" appears
    under the printer icon. I am not on a network, just the MacBookPro
    and the printer connected to a USB port.
    When I try and print out of Windows, the document goes into
    the printing que and just sits there, the printing que says its "ready".
    Can't help but think I've just got a setting wrong.
    Any help will be appreciated.
    Thank you community.
    MacProBook   Mac OS X (10.4.8)  

    Parallels is not an Apple product. Please post your question on the Parallels discussion forums:
    http://forums.parallels.com

  • Can't print from Windows laptops

    Please help! I just bought the Time Capsule and I can't seem to get my Windows laptops to print. Each time I try I get a LPR error. Does anyone know how to resolve this issue?

    Have you installed Bonjour for Windows?
    http://www.apple.com/support/downloads/bonjourforwindows.html

  • Can't print from Windows 8 through Airport

    Recently added a Windows 8 pc to my Airport network. After loading Bonjour to the PC, it finds the printer. However, it does not print a test page properly, just a single line about HP-PCL XL;3;0, etc, then blank sheets. Ideas?

    Wrong print driver?
    Try it with the printer plugged directly into the computer. If it works ok there then it should be ok via the network.

  • How can I print from my windows 8 pc to my printer using my 2nd g express?

    I have an hp deskjet 1055. It's just a USB printer how can I print from windows to my printer connected to my 2gen airport express? If it only works with airprint printers than why is there belkin routers that can work with any printer?

    Figured it out. To print wirelessly via airport express 2nd generation you have to do some things. Download the bonjour printer thing mentioned above and have the printer plugged in to the airport express. Then run the bonjour printer thing and select your connected printer and install. Where I went wrong was I tried to print from my hp printer (1). When you install a printer with bonjour to print wirelessly it installs the same printer (2) so it's like there's 2 different printers in word or whatever you use to print.  You have to select the one that says ready. Thanks for everyone's help

Maybe you are looking for