Can't print over network with WinXP.

I have a HP LaserJet M1120 MPF and it's connected to a Windows XP desktop via USB. My MacBook uses the shared internet connection on the desktop through a wireless router, but I cannot set up the printer. I can see it, when I go to add a new printer, but I can't find the driver for it in the drivers list. Please, help.

I think I figured it out after torchering my self for weeks.
I had my computers and printers hooked up directly or wireless through a linksys WRT610N router. I decided to add a linksys switch right after the router and plugged the computer and printers in through the switch and now it works.
This is very strange, there must be somekind of incompatibility with the WRT610N router that is causing the problem, it works but refused to print for some reason. I tried changing settings in the router but haven't got it to work.
Any clues on what it could have been with the router?
Thanks,
Ara

Similar Messages

Can Printer over network but can't scan over network with Officejet 6500 E710n

Got an odd problem... I can print all day via my wireless network, I can even ping my printer's IP with no issues.
I can't scan at all, it keeps giving me connection related error messages (Scanner Unreachable, etc). I checked the "Update IP Address" tool and the IP address was correct. So I figured I would install on a different computer.
I installed using the software from this website (I have never installed this HP printer on this computer, I always did eprinting from this computer), it worked perfectly, it found the printer almost instantly. Installation worked perfect with no issues, errors, etc.
Printed the test page perfectly but I still can't scan over the network, I tried both clicking on "HP Officejet 6500 E710n-z" and clicking on both "Scan a document or photo" and "Activate Scan to Computer" and also I get a connection error if I try the "HP Scan" software.
I ran the "HP Home Network Diagnostic Utility" but it can't find my printer (odd that it found it to install the software and I can print/ping it all day).
I also ran the "HP Scan Diagnostic Utility 4.2" and it DID find the printer... It also got past the "Connectivity" and "Device Manager" steps and put a check next to them.
It then failed on the "Windows (WIA) Scan" step. I skip it and it fails on the "HP Twian Scan" after giving me a connection related error message. It will not let me continue the test.
I have restarted both computers and printer multiple times. I am running Windows 7 on my laptop and Windows XP on my desktop.

I suggest uninstalling the full feature software from both PCs and re-installing and configuring the software on both.
Are you using the HP Solution center to scan? It is in Dutch, but the images are the same as what you should see in a correctly installed full feature software package.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Can't scan over network with a laserjet 1217 on a Mac

Hi
My set up:
Mac with Yosemite
Laserjet M1217 over wireless
Problem description:
I can't scan. From preview, or the control panel, or image capture, I get the same error saying "can't open a session"
I have installed and re-installed the drivers/printer around 100 times.
I have tried adding the printer/scanner as airprint, or with the name of the printer as a post suggested.
Everything result in the same error.
I have version 2.0 of the driver installed right now. Tried with 1.7 as well, same result.
I can print without a problem from my Mac and from my iPad.
Tried with an ethernet cable and have teh same issue in case someone ask.
I've looked everywhere in google and doesn't seem like anyone else have the same issue? Many people have issues printing over wireless, but that's ok for me. Is the scanning I can't get to work.
HP pages doesn't offer any different driver than what Yosemite has. HP doesn't offer any extra program for Mac and scan.
Don't know what else to try.
Some help? Anyone?
This question was solved.
View Solution.

Hi @juancgallardo ,
I see that you are experiencing issues scanning over the wireless network and hardwired network on Yosemite.
I would like to help you out with this issue today.
The drivers for Yosemite are installed by the Apple Updates.
Installing Your HP Printer Driver and Software for Mac OS X.
Did you add the printer as a Bonjour printer or IP Protocal?
IP Protocal won't allow you to scan, just print.
You can also download and install the HP Printer Drivers v3.0 for OS X.
If you are still having issues then check that the scanning ports on the router to make sure that they are open. You can contact the router company to check and open these ports 9220/9500/427 on the router.
If you still can't scan, connect the printer directly to the Mac with a USB cable and see if you can scan. Just to rule out a network issue.
What kind of router do you have?
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Can't print over network get message "Error Printing" in message Queue

Hi,
I have 3 machines, xp, vista and windows 7. I have 2 printers that are configured to print through the network
1. OfficeJet Pro L7680
2. PhotoSmart C7180
For all 3 computers I can go to the web configurations for the printers (so I know the network settings are correct). Windows finds the printer and properly installs the drivers using the TCP/IP network port.
I can only print to the PhotoSmart from the Vista computer. I can't print from the XP or Windows 7 machine, I can't printer to the OfficeJet Pro from any computer.
Both printers work on all computers via USB port.
when I try to print a test page the job stays in the print queue and gets a message "Error Printing".
The funny part is that the computer can communicate with the printers and get the ink levels no problem.
I have been banging my head on the wall and cannot figure it out.
Any Suggestions?
Thanks,
Ara

I think I figured it out after torchering my self for weeks.
I had my computers and printers hooked up directly or wireless through a linksys WRT610N router. I decided to add a linksys switch right after the router and plugged the computer and printers in through the switch and now it works.
This is very strange, there must be somekind of incompatibility with the WRT610N router that is causing the problem, it works but refused to print for some reason. I tried changing settings in the router but haven't got it to work.
Any clues on what it could have been with the router?
Thanks,
Ara

Can't print across network with LaserJet 1220

I'm trying to print across our home wireless network from my Windows 7 64-bit computer to a LaserJet 1220 connected to a Windows XP 32-bit computer. My computer sees the printer in the network, but when I try to install it on my computer, it searches the web for a driver but can't find one. There must be a way to get this to work. Any ideas?

How about this?
Windows 7 and HP All in One Printers
Disclosure: I'm just guessing, and have not yet tried Windows 7.

How can I print a file with mixed page orientation in windows 8.1?

I have a win 7 and a win 8.1 computer. I have a file which contains both landscape and portrait pages. The file prints correctly with the mixed orientation from the win 7 pc, but will only print with either landscape or portrait on the win 8.1 pc.
I am using Adobe reader XI on the win 7 pc and adobe touch on the win 8.1 pc

ส่งจาก จดหมายของ Windows
จาก: Pat Willener
ส่งเมื่อ: จ. 5 มกราคม 2558 6:15
ถึง: thang dinhvan
How can I print a file with mixed page orientation in windows 8.1?
reply from Pat Willener in Adobe Reader Touch for Windows 8 - View the full discussion
I have a win 7 and a win 8.1 computer. I have a file which contains both landscape and portrait pages. The file prints correctly with the mixed orientation from the win 7 pc, but will only print with either landscape or portrait on the win 8.1 pc.
I am using Adobe reader XI on the win 7 pc and adobe touch on the win 8.1 pc
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7064031#7064031 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7064031#7064031
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Reader Touch for Windows 8 by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

How can i print a network configuration page , i need the IP on a ph1510

how can i print a network configuration page , i need the IP on a ph1510

Hi,
What is the exact printer model?
If it is the HP Deskjet 1510, this is a USB printer and it does not offer any network capabilities.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Can I extend a network with an AirPort Extreme Base Station Rather than with an Express?

Topic title pretty well sums up the question.
I have a TimeCapsule Base Station with two Expresses for extending the network through the house.
We're doing a 3 room addition, and there is not a convenient place to put an Express in a wall outlet in the middle room of the addition, but there's a perfect place to put an Extreme on top of a piece of furniture.
So, can the Extreme act as an "extender" only, in lieu of using an Express?

pcbjr wrote:
Topic title pretty well sums up the question.
I have a TimeCapsule Base Station with two Expresses for extending the network through the house.
We're doing a 3 room addition, and there is not a convenient place to put an Express in a wall outlet in the middle room of the addition, but there's a perfect place to put an Extreme on top of a piece of furniture.
So, can the Extreme act as an "extender" only, in lieu of using an Express?
Hiya.
You can absolutely extend a network with an Extreme. I've got a 5th gen. Extreme extending a network created with a 3rd gen. Time Capsule. On the Extreme, you'll have the option to allow (or not) WiFi clients. I recommend having all units updated to the current firmware (7.6.1 as of this writing). Note that extending doesn't work in daisy-chain fashion, meaning that your Expresses or Extremes will each connect to and extend from the TC. As such, you'll want the TC to be in as central a location as possible to offer the best coverage.

Can i print a spreadsheet with formulas?

Can I print a spreadsheet with formulas instead of the product of the formula?

As Wayne wrote, you may print the document with the list of formulas but sometimes I use an other scheme.
(a) duplicate the document
(b) select the entire table(s)
(c) apply the format 'Text'
(d) ajust cells size to display the entire formulas
Yvan KOENIG (VALLAURIS, France) dimanche 15 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan

How can I print a JTable with varying sized rows?

How can I print a JTable with varying sized rows?
I am using java 1.5, and have made a cell renderer to display multiple lines in rows and it works well, however when I use the new print method it doesn't separate the cells onto the next page, it cuts them and will print the rest of the row on the next page. Does anyone know how I might go about making this happen?
cheers

I finally found out the reason, The column heights were being set through my renderer. If I hadn't viewed them in the scrollpane the row heights were set to the default height of 16 therefore when the print method was called it clipped all the rows wrong, what is weird though is that the row height printed out correctly but the clipping area was set wrong because it was getting the default value of 16 from rowHeight(row).

Can not print pdf file with firefox 29.0 pdf preview plugin. Why?

Can not print pdf file with firefox 29.0 pdf preview plugin. Why?

Control V doesn't work here for a screenshot.

Can I extend a network with AE, then plug into it?

i have checked but can't seem to answer this exact question:
i have a time capsule and my G5 tower is plugged in using ethernet (no wifi card). I also have a MBP. i am moving my G5 one floor down where there is no ethernet plug, but the wife reaches.
can i extend the network with an AE and then PLUG the G5 into the AE? or will i need a wifi card?
thanks in advance
keith

You would use AirPort Utility to first check the settings on the Time Capsule
AirPort Utility - Manual Setup
Click the Wireless tab below the row of icons
Make sure there is a check mark next to "Allow this network to be extended". Otherwise, things won't work.
Note the exact Security setting you are using for use with the AirPort Express
Use AirPort Utility the same way for the Express
Click the Base Station tab to name the device, assign password, adjust Time, etc
Click the Wireless tab:
Wireless Mode = Extend a wireless network
Wireless Network Name = Same name as the Time Capsule network
Check mark next to Allow Wireless Clients
Wireless Security = Same setting as the Time Capsule
Wireless Password = Same password as the Time Capsule
Confirm Password
Update to save changes. You should have green light in 30-40 seconds and the ethernet port will be active.

Can't see wireless network with Windows Vista

I have the Airport Extreme N and two PCs, one with W XP and one with W Vista. Everything works fine with the XP PC. On the Vista PC, I can connect to the network with LAN, but I can’t see the wireless network.
The W Vista PC can identify other networks around the block, so the Broadcom 802.11g network adapter seems to work fine. The wireless runs on channel 13, which is OK for the XP PC. I have installed the latest update for the Airport Extreme.
Any suggestions to what I can do to get the W Vista PC working on wireless?
Best, Kasper

Hi,
I also have the same problem.
My belkin wirelss router is set to channel 13, therefore my macbook cannot see this network when it search's, for the above reasons.
However unlike the situation above I am unable to change from channel 13 as we have discovered in the past that this is the only channel that is not in use by other networks around our area. The rest gave us interferance troubles.
I have a number of windows laptops in the house and there is a setting that you can change so the laptop will search for channel 13. I was wondering if anyone is aware of a setting on the macbook that will make the airport card search for 1 - 13 not just channels 1 - 10 as it is now.
I thought I would add this question to this topic as it is very similar. I hope I was correct in doing so.
Thanks,
Josh
Macbook Mac OS X (10.4.8)

I can not print web pages with my HP Deskjet 5440

I can not print web pages with my HP Deskjet 5440. I use Vista, no error page, just prints a blank page with headers and footers. Recently reinstalled printer driver from HP.

Hello , Welcome to the HP Support Forums!
I understand that since upgrading your Mac OS X 10.10 computer to Mac OS X 10.10.4 you have been unable to print colour photos wirelessly from your HP Officejet 5740 e-All-in-One Printer. I would like to assist you today with resolving this colour printing issue. To be honest, it does sound like Mac may have loaded the generic Apple Airprint driver on your printer rather then the HP Full Feature Software and Driver package. Should this be the case then you will only have basic print capabilities. Please follow the steps below to confirm that your HP Officejet is utilising the correct driver on your Mac.
1. Click the Apple menu, and then click System Preferences. 2. Click Print & Scan, and then check if the name of your printer displays in the Printers list. 3. Click the name of your printer, click the minus sign (), and then delete the printer.  4. Click the plus sign (), click Add Printer or Scanner, click the name of your printer, 5. Click the Use or Print Using box, and then select the name of your printer in the pop-up menu. Ensure that the Officejet driver is selected and not the Airprint driver.
  6. Click Add to add the printer to the list.  Once your printer has been installed with the correct HP driver, please test printing a colour photo to confirm that the issue has been resolved. Please respond to this post with the result of your troubleshooting. Should the issue persist there are additional software and driver troubleshooting steps I will have you perform. I look forward to hearing from you!

Hi there! We just got an ipod touch 8G. We have wireless internet, but can't join the network with the ipod touch! Very frustrating and we have tried all of the troubleshooting suggestions on the support site. Help! The router is a linksys WRT120N.

Hi everyone! WE just got an ipod touch 8G. We do have wireless internet, but can't join the network with the ipod touch. Message comes up.."unable to join the network".....very frustrating! We have tried all trouble-shooting suggestions on the site, but nothing is working. Anyone out there got any ideas for us?? The router is a Linksys WRT120N.
Thanks for any help any one can give!!!

Does the iPod connect to other neworks?
Do other devices connect to the network?
What encryption are you using?
How you tried changing the type of encruption? Changing to no encryption?

Can't print over network with WinXP.

Similar Messages

Maybe you are looking for