Can't print PDF file. Printer just sends out blank paper. Printer will print other non-PDF files.

Printer company said it was an adobe problem

Save the file on your desktop or in your download directory, open it with adobe acrobat reader then print it.
I've got the same issue, apparently IE7 is having an hard time dealing with PDF files...
Jin
http://exonerationfiscale.com

Similar Messages

  • HP PSC 2175 spits out blank paper while I print.

    I have Dell GX520 Desktop PC with Windows XP service pack 3 and HP PSC 2175 all-in-one printer. Since few days I m having trouble printing with my printer. When I try to print it simply picks up the paper scans it and spits out  blank paper instead of printing it. There is no any error message or flashing light or any thing in the printer.
    But still I can make copy or print the test page from it. The only thing is I can't print any document from WordPad or NotePad or through Adobe Reader. I don't have Office on my PC.
    I have tried every thing that I can do. Uninstall the driver and reinstalled  it  downloading from HP website,updated the drivers manually, replaced new cartridges and what not. But I still have the problem. It would be so helpful if you have any solution to this problem.

    I'm having the same problem....
    The computer is a hp pavilion.
    When trying to print, It loads the paper, It checks the paper position, then it just ejects the paper.
    I opened the print job que and watched it.
    When the print job ques up, it shows the job...then deletes the job before printing it.
    It has been working fine up until a few days ago.
    Any help would be appreciated.

  • C4480 just churns out blank paper

    I recently bought a new C4480 All-In-One to replace my clapped out HP printer - the old one's paper feed was no longer working.
    The Paper Feed on the new C4480 is fine, but there is just one snag. Whenever I send over a page or document from my word processing system (I use and love an old version, WordPerfect 8) all that happens is the printer spits out a completely blank page, or series of pages. The old HP printer was completely happy with this and printed without any trouble - until its paper feed broke down.The same new C4480 printer will cheerfully print Test Pages till the cows come home, and also print colour photos from different kinds of file.
    I have tried reloading new C4480 software sent down the line by HP's help people, but still to no avail. 

    Please read this post then provide some details.  What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth? Are there any error messages on the printer or computer screen?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page, but not all or pages 1-5.  Can this be overcome?

    I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page only, but not all or pages 1-5.  I need to go to the next subsequent page and command to print current page; continuing with this procedure until all pages are printed one at a time. Can this be overcome?

    You can use printPages(1, 5), however I need to know how you print current page.

  • I will try to print from word to the Adobe printer.  Sometimes it just freezes.  I cannot select another printer.

    I will try to print from word to the Adobe printer.  Sometimes it just freezes.  I cannot select another printer.  It’s like all my printers are gone.  Sometimes I get an “Unable to Connect” error and sometimes I get “1 document in printer queue”.  No matter what printer I choose after I try to go to Adobe, I cannot connect to a printer.  The only solution I have come up with is a clean reboot which I can't afford to do 4-5 times a day.
    Currently on Acrobat XI Pro 11.0.09

    Hi Tymuls,
    The first step I would try is delete the Adobe pdf printer and then repair Acrobat.
    Repairing Acrobat will bring back the pdf printer. We released an update yesterday i.e. 11.0.10. try updating to the latest version and check.
    Have you tried uninstalling the software and reinstalling it.
    You might also want to check the performance in a new admin user account.
    Regards,
    Rave

  • I have used Image Capture to scan images/documents and then saved them as either PDFs or PNG files.  For some reason, just this past week Image Capture will no longer save the file.  It scans, and the Scan Results window pops up, but it won't save file.

    I have used Image Capture to scan images/documents and then saved them as either PDFs or PNG files.  For some reason, just this past week, Image Capture will no longer save the file.  It scans, and the Scan Results window pops up, but it won't save file.
    The file name has no special character in it, just letters and no spaces.
    I have done this in the past and it has worked, but now it will not.
    I have not upgraded any software, that I am aware of.
    After scanning, the Image Capture pops up the Scan Results with the file name in the window, but neither the Scan Results nor the Image Capture window responds to inputs.  The Image Capture window is frozen, with only the "Overview" and "Cancel" buttons active (but non-responsive).
    Is this a software issue or a scanner hardware issue?  I am using a HP Photosmart C6200 series printer/scanner on a network using a Time Capsule airport.
    Thanks.

    I had the same problem.
    Got a 90% fix.  Apparently the Mavericks preferences won't work with Yosemite, so I just deleted the Image Capture preferences.
    Unfortunately, the "Scan to" folder seems to be permanently set to the Pictures folder.
    1.  Quit Image Capture
    2.  Go to Finder > Go > Home, which opens up your home folder (named after your user name)
    3.  Open Library > Preferences > com.apple.ImageCapture.plist - Drag this file to the Trash
    4.  Start "Image Capture", click "Details" and change all your settings as you prefer
    5.  Quit and restart "Image Capture".   Notice it remembers all your settings except "Scan to" folder.  It insists on saving to "Pictures".
    That's as far as I was successful.  I tried changing the "Scan to" folder to "Desktop", but on launch, Image Capture always sets it back to "Pictures".
    This is what I tried:
    6.  Download and install "Pref Setter" from http://www.nightproductions.net/prefsetter.html
    7.  Quit "Image Capture".  Right-click on "com.apple.ImageCapture.plist" and open with Pref Setter.
    8.  Search for "Pictures", which finds "~/Pictures" (the tilde character at the start means your home directory).
    9.  Double-click on "~/Pictures" and change it to the folder you prefer.  I like "~/Desktop"
    10. Choose File > Save then Quit from Pref Setter.  Note that re-opening the plist file still shows "~/Desktop"
    11. Start up "Image Capture" -- on startup, "Image Capture" sets "Scan to" folder to "Pictures"
    I consider this a bug.

  • Printer sending out blank sheets

    When I try to print to my Epson CX8400 from my MacBook Pro it generates multiple sheets of blank paper, even if I try to run a test print. It prints fine to my old HP Deskjet. The Epson works fine with my Imac desktop, so it isn't a printer problem.
    I have recently installed Parallels 4.0 and Windows XP on the Macbook. In Windows it says the Epson is not available, but the HP is.
    I have reset the printers in the Macbook, still does not work.
    Any ideas?
    Thanks!!

    MLiles wrote:
    My HP All-in-On 7200 has recently begun sending out blank pages between each texted page.  How can I fix this problem?

  • I have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can

    i have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can anybody help me.

    You'll need to update to at least ACR 8.2 for the 70D to be recognized.  The normal way to update PSE12 to the latest CR is to use Help / Updates in the Editor which should update to ACR 8.5.
    According to Adobe's website PSE12 shipped with ACR 8.1 and you say it says yours is reported as ACR 8.0.
    Are you using PSE 11 and not 12?  PSE 11's maximum ACR version is 8.0.

  • With Forms Central can I set up a form to send out an automatic PDF document like a quote?

    With Forms Central can I set up a form to send out an automatic PDF document like a quote? In other words when my customer fills out the form and puts their email address on the form it automatically sends them a PDF quote on a piece of merchandise that I have. If not is Form Central compatible with Web Merge?

    Hi;
    At this time FormsCentral does not have the ability to send the PDF in the "Email Reciept", you can set up Email Reciepts to send the form filler a reciept with the form data, but it does not attach a PDF of the form. 
    FormsCentral is not compatible with Web Merge.
    Thanks,
    Josh

  • I have just purchased elements 12. It will not convert a raw file for me. i have downloaded DNG convertor 8.5 but it says that my Canon 70d is not compatible. I never had a problem with my last camera canon 7d and elments 8. Can someone help me please..

    i have just purchased elements 12. It will not convert a raw file for me. i have downloaded DNG convertor 8.5 but it says that my Canon 70d is not compatible. I never had a problem with my last camera canon 7d and elments 8. Can someone help me please

    Did you buy PSE in the mac app store? If not, just go to Help>Updates in the editor and update camera raw and you should be able to open the raw files in PSE 12 directly without the DNG converter.

  • My c6180 wont print on kodak ultra premium high gloss paper but will print on plain paper

    my c6180 wont print on kodak ultra premium high gloss paper but will print on plain paper. am i doing something wrong? I've never used the printer to print pictures.

    Hi there bigpul,
    Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using and are you recieving any errors or just blank prints?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • My printer is saying that it is out of paper when I try to print on 4x6 or 5x7 paper.

    When I try to print on 4x6 or 5x7 paper the printer is saying that it is out of paper. It will print on 81/2 x 11. not sure what is going on.

    Hi - Try following the steps in this document.  It should help resolve the issue.
    Hope that helps.
    Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

  • I cannot email document once it's finished. Just sends an blank document.

    I cannot email document when it's finished. It just sends a blank document.

    Are you talking about a form completed and emailed within Reader? Is it that the document is blank when you open the emailed form back up in Reader, or does it just look blank in the body of the email?
    In my experience, you can not see the completed fields within an email, but everything is there when you actually open the attachment.

  • Hp Officejet Pro 8500 Q910a looks like it is printing and copying but pages come out blank.

    Hp Officejet Pro 8500 Q910a looks like it is printing and copying but pages come out blank. I have used genuine HP cartridges. All four cartridges have have over 40% ink levels as per Self Test Diagnostic page.Printhead diagnostic says the print heads are "GOOD". Scanner  works fine.  Self Test Diagnostic Page prints in PINK color.Print quality TEST does not have black print on page.Printing and phot copying all come out blank.HELP.

    Hi Equi_nut,
    Do you have the same printer as the user above? 

  • Hello there, is there any way i can log onto Game Center via just my Username as i have forgotten the other details (I made the account when i was 11 - I'm now 14 and have a bad memory)

    The Question says it all really.
    Is there any way i can log onto Game Center via just my Username as i have forgotten the other details (I made the account when i was 11 - I'm now 14 and have a bad memory)?
    I remember my Username on Gamcenter but due to the recent update of iOS7, it is only letting me Sign in through my APPLE ID - which i have forgotten over time. I wish to recover my account recently because I remember purchasing Gems on the game 'Clash of Clans' and I wish I could restart playing the game.
    Many thanks for taking your time to read and answer this question.
    -Gavin Chong.

    Hey xChongy!
    I have an article here that can help you find that forgotten Apple ID:
    Apple ID: How to find your Apple ID
    http://support.apple.com/kb/HT5625
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

Maybe you are looking for

  • The MessagePerformanceUtils:totalTime issue in Flex 4 (rpc.swc) using LCDS 3.1 running under JDK1.6

    We are facing an issue while using LCDS 3.1 running under JDK1.6 in Sun Solaris v5.10 OS & Adobe Flex 4. Scenario :- =================================== As part of our Flex-based client-server application (with Java backend) we have a performance rep

  • Project Server 2013 and email notifications

    Hi, Newbie's question: is it possible to set email notifications in Project Server 2013 without Exchange Server, just with gmail or hotmail?  Is there somewhere a document for that? Thanks

  • Download 9i Form

    hi friends, I want to download 9i Form developer. what i require to download any oracle product? Is there any licence which i supposed to have? or only to accept the terms and conditions given in download procedure.

  • Search User Page - Case Sensitivity Problem

    Hi, While searching users according to the criterias like user's firstname or lastname, the search is case sensitive. Is there a way to make incase sensitive search? Thanks.

  • Audio compressor/limiter

    I've seen talk on here about setting levels for audio in order for it to stay within a healthy range for DVD and TV playback. How do I do that and when do I apply the compressor/limiter? Do I do it to ever clip or can I do it to the entire project at