Can't print Samsung ML-2010

Help, can't print using my Samsung ML-2010 printer. Downloaded and installed the 2.0 drivers. Still no printing.
Advice welcome.
-chris

Hi
Thank you for your response I have sorted out the problem.
I noticed it just after I posted and so I must apologise for wasting your time. It was indeed a the, er, hardware connection from the printer to the computer…
I hadn't plugged it in!
I'd thought I had but there's a bunch of USB cables at the back of the iMac and I'd plugged in the wrong one
Silly me.
Intel iMac 20"   Mac OS X (10.4.9)  

Similar Messages

  • [printer] Samsung ML-2010 [RESOLVED]

    Good morning!
    I was tryng to use my b/w laser printer on my Mac Mini with OSX 10.5.8
    Driver are nor available on Leopard and I've had to download them from Samsung site. The printer model is ML-2010.
    Driver installation is simple and clear but no response from the printer. Only daemon CUPS said "/Library/Printers/Samsung/ML-2010/rastertosec failed".
    Thanks to this link of Gary Park:
    http://discussions.apple.com/message.jspa?messageID=7583432#7583432
    I've reinstalled the driver for another printer model of Samsung: ML-2240.
    The printer works very well!
    just for info.
    Message was edited by: cacao74

    Cacao74's tip does the trick for a MacMini Intel running OS X 10.5.
    No other remedy worked to restore printing to a Samsung ML-2010 EXCEPT his tip to install the drivers for the ML-2240.

  • Printer stopped working - Samsung ML-2010 [Fixed]

    My printer (Samsung ML-2010) has always worked fine, but now it suddenly doesn't work.
    Here is the tail of everything.log:
    Jun 12 20:35:02 alpha kernel: [16997.071655] usb 5-2: new full speed USB device number 3 using uhci_hcd
    Jun 12 20:35:03 alpha mtp-probe: checking bus 5, device 3: "/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-2"
    Jun 12 20:35:03 alpha mtp-probe: bus: 5, device: 3 was not an MTP device
    Jun 12 20:35:03 alpha mtp-probe: checking bus 5, device 3: "/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-2"
    Jun 12 20:35:03 alpha mtp-probe: bus: 5, device: 3 was not an MTP device
    Jun 12 20:35:03 alpha udev-configure-printer: add /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0
    Jun 12 20:35:03 alpha udev-configure-printer: add /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/usb/lp1
    Jun 12 20:35:03 alpha kernel: [16997.372454] usblp1: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04E8 pid 0x326C
    Jun 12 20:35:03 alpha kernel: [16997.372474] usbcore: registered new interface driver usblp
    Jun 12 20:35:03 alpha udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:1d.0/usb5/5-2
    Jun 12 20:35:03 alpha udev-configure-printer: Device vendor/product is 04E8:326C
    Jun 12 20:35:03 alpha udev-configure-printer: failed to claim interface
    Jun 12 20:35:03 alpha udev-configure-printer: invalid or missing IEEE 1284 Device ID
    Jun 12 20:35:03 alpha udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:1d.0/usb5/5-2
    Jun 12 20:35:03 alpha udev-configure-printer: MFG:Samsung MDL:ML-2010 SERN:- serial:3A37BKEYA21816D.
    Jun 12 20:35:04 alpha udev-configure-printer: no corresponding CUPS device found
    Jun 12 20:35:04 alpha kernel: [16998.388750] usb 5-2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
    I've tried removing and re-adding the printer, but now CUPS doesn't detect any printers.
    Last edited by shaurz (2011-06-12 20:33:54)

    I've fixed it now. I uninstalled foomatic, installed splix and it detected the printer after rebooting.

  • [solved] samsung ml-2010, i can't get it to work!

    hello!
    is anyone here, who successfully prints with a samsung ml-2010? i've everything (installing splix, installing samsung driver, google...) but nothing!
    i can send a print jo, but the printer does not do anything!
    please help...
    thanks, mfg iggy
    Last edited by iggy (2007-10-16 22:10:39)

    I bought one of these about a week ago and am really pleased.
    1) Don't bother with the samsung driver. It may be good but it installed cups 1.1. Run the uninstall script if you haven't done so.
    2) I didn't even try the gutenprint drivers (maybe the ml4500 is compatible?)
    3) I did try the foomatic ml-2010 driver which is excellent 600x600dpi
    4) I settled on the splix driver which does 1200x600 dpi and is even better on gradients (I couldn't see any difference between the two drivers when printing text)
    Does any printer work on your system?
    As "root", check kcontrol -> peripherals -> printers. Under the "print manager" tab, go to "configure manager" and check that under "cups server" you have "localhost" and "631", not some lock file.

  • Samsung ML-2010 Laser printer not working

    I just hooked up my new 802.11n Airport Extreme base station, and I can't get my samsung ML-2010 laser printer working with it. The Airport Utility recognizes the printer, and bonjour installs the printer on the windows machines, but when I go to print, nothing happens. Is there a list of compatible printers for the 802.11n base station?

    flemingljr, Welcome to the discussion area!
    Is there a list of compatible printers for the 802.11n base station?
    iFelix has started a list. Since the device has been in the wild only a few weeks the number of user experiences with varied printers is still small.

  • Samsung ml-2010 printer + Airport Extreme

    I recently purchased an Airport Extreme and networked my samsung ML-2010 laser printer and a external hard drive. I have a usb hub (usb powered) connected to the AE. If i, for some reason, unplug the printer, change the toner, or turn it off then on later, the Airport will not automatically recognize it again. I have to shut off the Airport and turn it back on with the printer ON and connected for it to recognize it again. Is there any update, or fix, that would allow the Airport extreme to recognize the printer as plug and play???
    Any help would be greatly appreciated!

    Nobody can give me some help? I want to make sure that the printer works before buying the Airport Extreme... :P

  • Cannot print wirelessly with Samsung ML-2010.  Recently installed Leopard.

    i'm having an airport printing problem with my Samsung ML-2010. I have never used it with an airport express, but have successfully used my iBook G4 to print successfully using several airport connected printers.
    I have lost my "Printer Setup Utility" since recently installing Leopard. I have read this is a common problem.
    The point is that I can still print using my USB cord, but am having no luck with the airport. I also cannot add a printer using Rendezvous or Bonjour.

    Right then. He's a Mac-to-Printer direct work-around for the problem.
    Before you start. Ensure you have the ML-2010 driver installed. Connect the printer directly by USB to check.
    1. Open Print & Fax Preferences.
    2. Click on + to add printer.
    3. Select IP at the top of the page. Select HP JetDirect - Socket in the drop down.
    4. Enter the address of your AirPort Extreme (IP Address or name such as living-room.local) then add the socket number. 9100 for the first printer, 9101 for the second printer.
    4a. If you've got the address right it will verify this and confirm this on screen. It will select a generic postscript driver which you will change in step 6.
    5. Enter a Name and Location in the boxes at the bottom.
    6. In the Print Using box, choose Select Driver and then search for ML-2010 driver. Select it.
    7. Click Add and you're done.
    You will now have the printer included in your list.
    8. Click Open Print Queue.
    9. With the print Que open select from the Menu Bar: Printer > Print Test Page.
    10. Bingo you'll see the CUPS test page.
    Now. If you have a windows PC with Bonjour Printer Wizard and you've got a working printer queue. You can crib the network address by looking at the TCP port information for the print queue. It will reduce the amount of guessing. But generally, the hostname is base-station-name.local with the spaces replaced by hyphens.
    This should work for everyone and I so far (2 hours testing) I've not had a failed print.
    Good luck and quite honestly I can wait for the fix to the bungled update now.
    Karl

  • How can I print from my Samsung Galaxy note 8.0 to my HP office jet 6500 a e710n.

    How can I print from my Samsung Galaxy note 8.0 to my HP office jet 6500 a e710n.  I live in the courty and do not have a router and I am using a desktop computer with a Wireless USB Adapter SMCWUSB-N2 installed.

    Hi raraock,
    I would like to help you with this issue. What are you trying to print from your Samsung Galaxy Note tablet?
    I worked on behalf of HP.

  • I'm using windows 7 and working in office 2010. I have installed iCloud and I can't print my calendar from outlook all it will print is a blank calendar no appointments or birthdays . can anyone help please.

    I’m using windows 7 and working in office 2010. I have installed iCloud and I can’t print my calendar from outlook all it will print is a blank calendar no appointments or birthdays . can anyone help please.
    Geoff

    I had a similiar problem, with my multiple devices.  I open iTunes and when all devices were connected I went to the info section on each device.  Under info I checked the sync calandars. Under that I click all calanders. I then did the apply in low right. I then did the sync function and it fixed it for me.  You have to do this for each device.
    I also checked the device (ipad,Iphone) themselves and change the calander selection to NO Catagory.  Hope this helps.

  • [SOLVED] CUPS doesn't detect USB Samsung ML-2010 printer

    Hi. I only speak a little English. Sorry for that.
    I have got an USB Samsung ML-2010 printer. Before I used cups-usblp from AUR, and it worked. But it doesn't work now. The cups-usblp maintainer suggests to use cups instead of cups-usblp. Searching with google, it appears that other people don't have problems with this printer, cups, and archlinux. But I do. Cups' web interface doesn't detect it.
    Well, this is how are the things now:
    $ lsusb | grep Samsung
    Bus 002 Device 004: ID 04e8:326c Samsung Electronics Co., Ltd ML-2010P Mono Laser Printer
    $ ls -l /dev/bus/usb/002/004
    crw-rw-r-- 1 root lp 189, 131 mar  4 09:56 /dev/bus/usb/002/004
    $ grep usb /lib/udev/rules.d/50-udev-default.rules
    # 'libusb' device nodes
    SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", MODE="0664"
    SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", IMPORT{builtin}="usb_id"
    SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:0701??:*", GROUP="lp"
    $ sudo grep SystemGroup /etc/cups/cupsd.conf
    SystemGroup sys root lp
    $ groups
    lp wheel games video audio optical storage scanner power users
    $ cat /etc/modprobe.d/blacklist.conf
    blacklist usblp
    $ lsmod | grep usblp
    (no output)
    $ cat /etc/udev/rules.d/10-cups_device_link.rules
    KERNEL=="lp[0-9]", SYMLINK+="%k", GROUP="lp"
    $ cat /etc/udev/rules.d/10-usbprinter.rules
    ATTR{idVendor}=="04e8", ATTR{idProduct}=="326c", MODE:="0660", GROUP:="lp"
    $ rc.d status cupsd
    :: Checking cupsd status                                                                                                   [STARTED]
    $ pacman -Q cups ghostscript gsfonts gutenprint foomatic-db foomatic-db-engine foomatic-db-nonfree foomatic-filters splix
    cups 1.5.2-1
    ghostscript 9.05-1
    gsfonts 1.0.7pre44-3
    gutenprint 5.2.7-3
    foomatic-db 1:4.0.7_20110707-1
    foomatic-db-engine 1:4.0.7_20110707-1
    foomatic-db-nonfree 1:4.0.7_20110707-1
    foomatic-filters 1:4.0.7_20110707-1
    splix 2.0.0-11
    I open http://localhost:631 in my browser, click "add new printer" and I get just "Serial printer #1"
    at "local printers". There isn't my printer. I use KDE, and KDE's tool for adding printers doesn's detect it either.
    I miss archlinux, but I need to print.
    What may be wrong? What may be I am missing?
    Thanks a lot for your comments and help.
    Last edited by felihommen (2012-03-04 20:33:39)

    Solved!
    Restarting cupsd didn't work.
    But reinstalling cups...
    $ sudo pacman -Rdc cups (it is a dependency of kdeadmin-system-config-printer-kde which I had installed)
    $ sudo rm -r /etc/cups/*
    I realize cupsd is already running:
    $ ps aux | grep cupsd
    root      1549  0.0  0.1  75548  4080 ?        Ss   21:04   0:00 cupsd -C /etc/cups/cupsd.conf
    felipe    1690  0.0  0.0   8416  1028 pts/1    S+   21:13   0:00 grep cups
    I kill it
    $ sudo -SIGKILL 1549
    $ ps aux | grep cupsd
    felipe    1694  0.0  0.0   8416  1024 pts/1    S+   21:13   0:00 grep cups
    Ok. Reinstall cups
    $ sudo pacman -S cups
    Start cups daemon:
    $ sudo rc.d start cupsd
    Open firefox. Go to web interface, bla, bla, bla.... And it's there!
    I feel really silly. It was a fresh install, so I didn't think about reinstalling.
    Printed some jobs and worked perfectly. I used the gutenprint driver.
    Thanks a lot, pyther.  I thought yours wasn't a very useful suggestion, but it really was. I'm so happy. I owe you.

  • I am using a samsung netbook, can do print test but cannot print a file

    i am setting up a new hp deskjet 3050 with my samsung netbook using windows 7 starter, i can do print test but cannot print anything else.  how do we fix it? thank you 

    Hi,
    If you use your netbook to print through the Wireless, be aware that Windows 7 Started eddition only support printing through a direct USB connection, network communication with the printer is not supported by the OS:
    IMPORTANT NOTES
    For Windows XP Starter Edition, Windows Vista Starter Edition and Windows 7 Starter Edition
    • Is supported for USB only
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-109394-2&cc=us&dlc=en&lc=en...
    If it is connected through the network, plug a USB between the laptop and the printer, then try printing and check for any difference.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HT1651 Can i use Samsung 2GB PC-8500 DDR3 1066MHz SO-DIMM 204 Pin 2.0GB Memory Upgrade Modules M471B5673FH0-CF8 with my mac bool mid 2010?

    Can i use Samsung 2GB PC-8500 DDR3 1066MHz SO-DIMM 204 Pin 2.0GB Memory Upgrade Modules M471B5673FH0-CF8 with my mac bool mid 2010?

    you are out of luck, I think.
    Not using the exact spec for memory wil cause trouble.
    When you have the original in (1066MHz) and add another with higher speed (1333) there is a (small) chance that the higher speed one is "clocked down" and will work, but expect kernel panics often. Most of the time it will not work.
    If there is no standard spec ram in at all, the mac will not start.
    Luckily ram is cheap nowadays. Send it back.
    The best way to buy is researching the Manufacturers' site and use the configurator, then go shopping, if you want.
    Use only respected brands: Crucial, OWC, personally have not so good experience with some other brands. And remember "pennywise is poundfoulish".
    I think Amazon will take it back and refund. Very unlikely that the memory is harmed. Ask them to take it back.

  • My Printer (samsung clx-3185fw) says it connects to my network but I can't seem to print wirelessly.  I could with my netgear but not with my airport extreme, any ideas?

    My Printer (samsung clx-3185fw) says it connects to my network but I can't seem to print wirelessly.  I could with my netgear but not with my airport extreme, any ideas?
    I have restarted all units, disconnected and reconnected

    Hi ryanfromstockbridge,
    I apologize, I'm a bit unclear on exactly what you are seeing when you try to add the printer or print to the printer. If you continue to have issues printing to this wireless printer, you may find the information and troubleshooting steps outlined in the following articles helpful:
    OS X Yosemite: Printing troubleshooting
    Troubleshooting printer issues in OS X - Apple Support
    OS X Yosemite: Add or remove a printer
    Sincerely,
    - Brenden

  • Printing from Windows XP to AX - Samsung ML-2010

    I have a Samsung ML-2010 hooked up to my AX. I have an iBook and MacMini that print to it fine. My windows machine is not printing.
    I did the following:
    1. Set up a new printer, followed the instructions to set up a TCP/IP printer using my airport IP. Added the Samsung printer to the list.
    When I printed the document, it did nothing.
    I then deleted the printer and did the following:
    2. Downloaded Bonjour for Windows. Followed the instructions and added the printer from the list.
    When I print a document, it goes to a print job, then fails.
    I attempted these things several times. Unable to find the problem.
    No problem with my mac computers.

    I am using the printer driver on my install disk.
    In the process of troubleshooting this problem, I discovered that my computer had been hijacked by a bunch of root kits. I have since cleaned off my hard drive and reinstalled Windows XP Home Edition.
    Now I am trying again. I installed Bonjour for Windows. I noticed that my printer is not listed in the Bonjour list for Samsung printers. I installed the driver from my install CD.
    Guess what? It is still not working.

  • Can not print using your brpuser i have window 2010

    my provider is AT7&T. They advised me to use you, because i was unable to send e-mails. they are equip for windows 2010 are you?
    I can not print from your browser.

    Resolution of the above two cases (as discussed with them):
    Nitin: There was some problem with MS word and Outlook communication due to which this issue was happening. After doing Repair of MS Office, his plug-in has started working properly.
    skioffval: For LeanPrint plug-in to work in Outlook, MS Word is needed on the machine. MS Word was missing on the machine which was casuing Outlook to throw the mentioned error.
    Thanks & regards,
    Hemant Virmani

Maybe you are looking for