Can't print screen when running windows on my mac

I've had a look at what buttons you need to press and found that its apparently fn+shift+f11 but when i try this nothing happens, I've downloaded the lasted bootcamp drivers but its still not work, anyone know how to fix it?

I am using the built-in Keyboard on the Mac.
Also, this what I have on the OSX side...

Similar Messages

WiFi slow when running Windows 7 on Mac Mini (2011)

Hi,
I have just bought a Mac Mini (2011) and used Boot Camp for installing Windows 7 as well. However I am experiencing some problems with the WiFi when running Windows. The speed is less than 10% of what it should be. I have tried connecting a network cable and then everything is running fine. When booting into OS X Lion there are no problems with running WiFi. I have tried to rightclick on the network adapter and select update drivers but it says that the driver installed is up to date.
Any ideas?

Apparently it was a router issue. When I connected my old Cisco router as an extended access point both the Mac OS and Windows session connected as supposed to. I made a factory reset of the router provided by my ISP, configured it again and the problem apparently seemed to be solved.
However overnight the problem occured again - I swithed the router off and on again and was able to connect. I noticed in the DHCP log that when running Mac OS the computername "My-Mac-Mini" is sent to the router with the MAC address of the network card - when running Windows it is the machine name I entered during the Windows installation. Not sure if that is confusing the router from my ISP but after I changed the computername in Mac OS the connection seems stable.

My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.

My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.
Will not show up in safe mode, will not show when started from Windows 7 DVD.
I suspect the Mac update wiped out my PC video drivers but can not think of a way to re-install?
Can see the PC volume from Mac side with files.
I've looked at all the online solutions so far and have tried most of them without success. Please help!
Specs:
2009 Macbook Pro, 3.06 GHz Intel 2 core, Max 10.6.8.
Model Name:          MacBook Pro
Model Identifier:          MacBookPro5,2
Processor Name:          Intel Core 2 Duo
Processor Speed:          3.06 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MBP52.008E.B05
SMC Version (system):          1.42f4
Serial Number (system):          7302300GANE
Hardware UUID:          B2D4B4B4-CD92-5C7A-BDC2-527D30DD8DF3
Sudden Motion Sensor:
State:          Enabled

EDIT: RESOLVED
For anyone else who finds their way here like I did, this link did it for me: https://forums.geforce.com/default/topic/527599/windows-8-issues-solved-please-r ead-if-you-39-re-having-black-screen-and-or-flickering-/
Specifically, the posts by Dunsany and valkyr did the trick. I booted in safe mode, uninstalled and deleted the Nvidia driver, disabled automatic driver installation, and restarted normally. I then manually downloaded and installed the previous Nvidia driver for my graphics card (which at the time of this writing was 335.23, rather than the latest which was 337.88), and everything is now bueno!
Two hiccoughs along the way: First, when I tried to uninstall the Nvidia driver the first time, when I restarted I got the login screen (which was a good sign), but it quickly went black again. I powered down, restarted in safe mode again, and repeated the uninstallation process, and it worked the second time. Second, when I started the manual install of the 335.23 driver, the computer played a sound similar to the one for disconnecting a USB device, and the screen went black. I'd seen a lot about trying to increase the brightness (though it hadn't worked up to this point; but if you haven't tried it yet, might as well); I tried it, and it worked! So far I'm back up and running. [/fingers crossed]
Hope this helps someone else!

Multitouch on track pad not working when running Windows 8 in boot camp

Does anyone know a work around on how to resolve the issue of more than one fingers on the trackpad? For example, I use one finger to click a window then another finger to slide/move the window to a different location on the screen. This does not work when running Windows 8 in Boot Camp latest version. Any suggestion is much appreciated.

very very few gestures are supported in windows
https://discussions.apple.com/message/24548533#24548533
if it's a limitation from ms you need to contact them
if it's a limitation from apples drivers you can use feedback channel
http://www.apple.com/feedback/

I can't print. When I go to file-print, nothing happens. My printer is working just fine with IE and everything else.

I can't print. When I go to file-print, nothing happens. My printer is working just fine with IE and everything else.

Try the Firefox SafeMode. 
''A troubleshooting mode, which disables most Add-ons.'' 
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Question mark when running Windows

When running Windows Vista on my iMac - Leopard OS and it is idle after "a while" I see a flashing disk object with a blinking question mark. Only way out is the off button. I have read about this problem during start ups but this after the machine is on and running and is idle. Any ideas?
iMac 3.06 Windows Vista

I am running from Bootcamp. It is very odd - this error occurs when Windows has booted succesfully and multipkle apps and games have been run over the course of the day then after being idle for a while in the evening - bingo the screen goes grey and the disk with the flashing question mark is there and as said the only next step is the off button. When I boot back up in Windows it runs fine until the same error ocurrs sometime after use and it is idle, that is no apps running. I have run Norton and Malwarbytes virus scans with nothing found. I run Registry clean up and after that fixes items same thing. Also I run TuneUp which has kept everything running smoothly - I do not engage TurboBoost.

Is there any way to stop the print screen from dropping down on top of the page to be printed. Can the print screen be moved?

Is there a way to stop the print screen from dropping down on top of the page to be printed. Can the print screen be moved? When the print screen drops down, it covers the page and the info needed to create the file. Thank you

You will find that this is application dependent. Most Apple applications such as Safari and Mail will use the "sheet" type of dialog boxes that you are referring. There is no way for the user to change that behavior. Other, non-Apple, applications like Firefox use a "modal" dialog box for printing etc. The modal boxes can be moved around so you can see the page behind.

Can't share screens with Skype Windows 8

I can't share screens with Skype (Windows . I searched everywhere but I couldn't find a solution for it.I tried: clicking on the + button during a conversation as well as right clicking on the contact and seeking for the screen sharing button. See both screenshots in attachment.May someone please enlighten me to find the screen share function on Skype version windows 8?

Not being able to view others share screenMy os is 8.1, I have installed the skype for desktop. I have also set, Video Settings==>Automatically receive video and share screens with anyone Yet when my friend click on share screen, I cant view his screen, whilst if I click on share screen he could. My skype version=6.11.0.102. I have also click on updates and all is latest. I also set for automatic update Able to block video calls but enable share screen
Pls advise how can I block all video calls yet able to allow anyone to share screen with me?

Can not print report when using HTML or DHTML

Can not print report when using HTML or DHTML. When I open the report and click the print icon I get a small blank dialog box and then nothing. If I change to activex it works and I can print.
Any Ideas?
Thanks
Jeff

Hi,
I did not come across this situation before. Did you apply any fix packs. Try to check whether its a issue which can be fixed by applying fix pack( try to check release notes of fix pack and see if they mentioned any thing about this).
Thanks,
SK.

How can I run windows 7 on mac

Can anybody help me to run windows 7 on my macbook pro?

go to your applications folder - then go to your utilites folder and click on bootcamp assistant and follow instructions - make sure you have blank dvd handy since it will download drivers for windows then burn in your dvd.
Click here for detailed instructions.

Why can you run windows on a mac, but not mac on windows

I dont understant why you can run windows on a mac, but not mac on windows. Any help. I would purchase OS X Mountain Lion if you gave me a way.

Microsoft builds software to run on other companies' hardware, pretty much exclusively if you don't count the long line of failed devices: Zune, Windows phone, and now the Surface.
Apple builds hardware. They support that hardware with their own operating system. It is designed to run only on their very tightly integrated hardware. Trying to write software for the plethora of crap being sold would be a failing proposition and would divert resources away from the great software they provide for their hardware customers.
The hardware and software are very well engineered to provide the best possible experience.
If you want to experience a Mac, buy a Mac.

Can you run windows on a mac without a partition

i want to run windows on my mac but i do not want to have a partition.
is there any way to run windows without a partition??????

william12frommagdalena wrote:
i want to run windows on my mac but i do not want to have a partition.
is there any way to run windows without a partition??????
Yes,
You can run Windows and a few programs at the same time as OS X in a window if your willing to take a performance penalty, no heavy duty 3D games or heavy CPU needs.
See this thread.
https://discussions.apple.com/thread/3655715?tstart=0

Typesize too small at screen; am running windows and using godaddy

typesize too small at screen; am running windows and using godaddy

See this: 
https://support.mozilla.com/en-US/kb/Page+Zoom

Upon launch of Lightroom after initial instalation a warning came up that said lightroom needs to create temporary files and cant open. The it opened and the catalog i imported will not show the images. How can I give permission? Running windows 8.1 64

Upon launch of Lightroom after initial installation a warning came up that said lightroom needs to create temporary files and cant open. Then it opened and the catalog i imported will not show the images. How can I give permission? Running windows 8.1 64 bit. I have avast virus software.

Upon launch of Lightroom after initial installation a warning came up that said lightroom needs to create temporary files and cant open. Then it opened and the catalog i imported will not show the images. How can I give permission? Running windows 8.1 64 bit. I have avast virus software.

Can't print duplex when using a CS2 doc in CS3

I can't print duplex when opening an old cs2 file in cs3, even when re-saving as a cs3 file. I can print duplex when creating a new document in cs3. The printer is a Xerox 242 Fiery. Any ideas?

I have the same problem with a DocuColor 5065 with firey. InDesign will never remeber the print settings for old CS 1 documents. New CS3 documents are fine. Only happens with this Fiery, all my other fierys work fine. Funny thing is even older documents (v1.5) remeber the print settings fine.
What I do to get around is to just send the file to the RIP, then change the print settings there to what I want then print.

Can't print screen when running windows on my mac

Similar Messages

Maybe you are looking for