Can't print through Linksys Print Server with PowerMac G5

Just wondering if anyone out there has been able to print using their PowerMac while spooling through a print server, specifically a Linksys PSUS4? I have a desktop and a laptop PC and a PowerMac g5 1.6Ghz and a MacBook Pro 2.0Ghz and only the HP laptop is able to print when my Epson R340 printer is routed through the print server.
I was using a Belkin switchbox to switch between USB hubs when printing with the desktop computers and this worked fine, other than having to remember to switch the connection when using a different computer.
Since then, I have added a Linksys wireless G router and a Linksys PSUS4 print server to allow the two laptops to print wirelessly. Now the only machine I can print from is the HP PC laptop. Neither desktop can print, nor my Macbook.
I am trying to use GIMP to print with my G5. When I send a jpb, it spools all the way through the job, but the printer never responds or prints a single sheet.
Again, I am using a PowerMac G5, 1.6Ghz and MacOS 10.4.8.
Any help anyone can give would be greatly appreciated!
PowerMac G5 1.6Ghz   Mac OS X (10.4.8)   Also using MacBook Pro 2.0Ghz

I've only been able to get it to work with my wife's HP laptop. So far, GIMP priting with the Mac is a no-go. It spools, but the printer just sits there.
As of now, I'm trying to print from my wife's desktop, which is an older model eMachines 1.1Ghz with XP Professional. Right now, it's just sitting there with a "Printing" window.
I have called Linksys, but to no avail. Couldn't understand they guy was speaking with. According to a networking friend of mine, there must be a PC host machine which is on all the time which acts as a "bridge" to get the files to the printserver. I don't know about that, but my father-in-law uses a PSUS4 to print wirelessly from 2 PC laptos with no problems.
Gonna try calling Linksys back and see if I get anywhere with that. If not, we'll try another route.
I'll post with what I find out.
PowerMac G5 1.6Ghz Mac OS X (10.4.8) Also using MacBook Pro 2.0Ghz
PowerMac G5 1.6Ghz Mac OS X (10.4.8) Also using MacBook Pro 2.0Ghz

Similar Messages

  • Trying to print through Linksys router

    Hey there,
    I'm trying to get a co-worker's Macbook to print through the Linksys router we have set up in the office, but it's proving to be more difficult than I imagined.
    I've located the printer through System Preferences, and strangely enough she DOES have Internet access (browser, mail, etc), however printing doesn't want to work for some reason.
    Has anyone had experience networking Macs with Linksys routers? And if so, how can we get the Macbook to print through it?
    Any advice is very appreciated.

    hey, i did have the same problem for a while, i had a linksys router setup through a print server. if your printing through a print server, make sure that it has a static IP address and then just put in the information in the printers folder.
    if your not using a print server, try enabling windows sharing, printer sharing and personal file sharing in system preferences > sharing folder.
    Macbook (Black)   Mac OS X (10.4.10)   Core Duo 2.0GHz, 2GB RAM, 80GB HDD, 500GB LaCie External Hard Drive

  • Printing tools on Aix server with Forte/Oracle

    I asked for it some weeks ago, but i had not enough answers... may be
    you were on vacations !!!
    I'm looking for a good software for manage print jobs on Aix server with
    Oracle rdbms.
    Something we cant use to make reports, bills, etc.. and callable with ou
    without Forte.
    If possible, reports template could be made on NT client (graphical
    tools) but the jobs will run on the Aix (to avoid running on a NT client
    and take all the network resources...).
    What do you use on your site ?
    Thanks.
    Cordialement.
    Patrice Bourdon
    Alliance Sante France
    Tel : (33) 02.54.60.26.27
    Fax : (33) 02.54.60.25.00
    e-M@il : [email protected]
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    I asked for it some weeks ago, but i had not enough answers... may be
    you were on vacations !!!
    I'm looking for a good software for manage print jobs on Aix server with
    Oracle rdbms.
    Something we cant use to make reports, bills, etc.. and callable with ou
    without Forte.
    If possible, reports template could be made on NT client (graphical
    tools) but the jobs will run on the Aix (to avoid running on a NT client
    and take all the network resources...).
    What do you use on your site ?
    Thanks.
    Cordialement.
    Patrice Bourdon
    Alliance Sante France
    Tel : (33) 02.54.60.26.27
    Fax : (33) 02.54.60.25.00
    e-M@il : [email protected]
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

  • Is it possible to upload large files through FTP to server with iWeb?

    Is it possible to upload large files through FTP to server with iWeb like for example with Cyberduck?
    I don't need to publish website with files, I just need to upload files on server. Can it be done somehow with iWeb?

    Here's some info about FTP...
    http://www.iwebformusicians.com/Search-Engine-Optimization/Upload.html
    Make sure you are allowed to store files on your server. Most hosting services don't allow anything to be stored that can't be accessed via the internet. Check the fine print!

  • Printing through Linksys Wireless Print Server

    Ok.. Here is the question.
    I have a Linksys Wireless Print Server (WPSM54G) which is connected to a Canon MX700. In windows this works great. However I cannot get OS X (10.5.2) to print to the printer.
    The print server (with firmware update 1017) supports IPP, LPR, and some other printing protocols.
    I have also pulled down the CUPS driver from Canon's site for the printer.
    At this point I am stuck in getting this working.
    Has anyone out there successfully gotten this wireless print server to work with OS X?
    If so, what is the trick?
    Thanks.

    I hope you're right about supporting the industry-standard protocols after a firmware update - because this print server didn't support those before...
    With the industry-standard protocols IPP and LPD, a queue name is a part of the address to direct data to the port on the print server. Do you know the queue name (also called port name in some documents) for this print server, so you can enter it in print & fax prefs?

  • Connecting printer through wireless Print Server

    Wireless Dlink DPR-1260, hooked up to network. ( using Linksys wireless router and Windows XP Home)
    Two usb printer ports. Loaded HP laserjet 2300 series using the print server software wizard.. works fine...prints remotely.
    The P.S. created the tcp/ip ports and loaded the drivers after requesting the HP driver disk.
    But, when loading the HP color laserJet 2550 series, it asks for the disk, but says the driver inf files not available. I downloaded from the HP web site the XP drivers, and when I pointed to the unzipped files, said the same thing.
    I used the XP driver... should I have used the Universal Print Driver?
    On the P.S. screen the HP 2300 shows up as HP LaserJet 2300 series, and the LPR Queque name is : LaserJet 2300
    But when I manually loaded the 2550, The name shows up as HP color LaserJet 2550 ser and the Queque name is color LaserJet 25.
    Both printers work fine connected directly to the printer, but the 2550 will not print through the P.S.
    Since the drivers for the 2550 are loaded and it prints when hard wired, tell me how to find the drivers installed on the computer, so I can point to them there.
    Thanks

    Printing with the built-in network protocols (Windows Printing, IP printing) requires a CUPS print driver. HP doesn't provide CUPS drivers (yet) - their drivers are written to only use USB. You can try the HP Photosmart P1100 Gimp-Print driver included in OS X.
    There is no CUPS driver for your specific model, that I can find.

  • Network Printing through Linksys PSUS4 works in leopard 10.5.1.

    Over here: http://forums.linksys.com/linksys/board/message?board.id=WiredPrintServers&message.id=578&jump=true#M578
    At the linksys forum, user Tpaquette recently posted a gem that enabled me to get my macbook (running 10.5.1) to print to my HP 6110 all in one wirelessly over the network using the gutenprint drivers included with the OS. I thought I'd echo the post over here so that more folks could benefit from it, but perhaps if it works for you, you could go to the linksys thread and add a reply with your printer model to the growing list of those that this works with.
    Cheers,
    Ethan
    http://forums.linksys.com/linksys/board/message?board.id=WiredPrintServers&message.id=578&jump=true#M578
    From: Tpaquette
    I've spent far too many hours trying to get this to work for me not to share it with all of you frustrated Vista/OS X users out there. The instructions that I've laid out here is from my Canon MP830 printer install.
    I believe the steps/process should work for any printer that you can find a CUPS driver for. I'm runing Vista Home Premium, Vista Ultimate and Mac OS X 10.4.10 just in case anyone wants to know what clients I have setup to access the PSUS4.
    So here's is what you need to do to get a mixed environment configured for printing..
    1. Setup your Vista and XP clients using the setup wizard on the CD that came with the print server. Pretty straight forward, you should have no problems.
    2. To setup the Mac, you will need to setup a static IP address on the Print Server. To do this log onto your printserver from your browser. Under the Protocol, TCP/IP tab, input an IP address of your printserver, the subnet and gateway (see example)
    I used the following IP Address
    IP Address ... 192.168.1.106
    Subnet Mask ... 255.255.255.0
    Gateway ...192.168.1.1
    Save your settings.
    3. Download the Gutenprint 5.1.3 drivers for OS X and install on your Mac running OSX.
    http://gimp-print.sourceforge.net/MacOSX.php3
    4. Using the Printer Setup Utility in OS X, select the "Plus sign" to add a printer. Click on the IP Printer Icon to bring up the IP settings.
    5. Select LPD for your protocol, enter the IP address of the print server from above, name your queue "LP".
    6. Under Name, enter the name of the printer, under location, provide a location (optional) and under Print Using, select Canon and you will then see all the print drivers that you installed back in step 3. Select the Canon Pixma MP830-CUPS+Gutenprint v5.1.3 driver or any other Printer Manufacture/Model that you need.
    7. Once you complete step 6, you should have a new printer added to your list of printers and you should be able to print.
    I've only tested this for my MP830 and I'm assuming that the process will work for other printers. If you try this and it works, let others know.
    Take care.

    For Leopard users, instead of loading the CUSP driver as noted in the post, use the Gutenprint driver that comes with Leopard. Upon trying to print after upgrading to Leopard with the CUSP driver you will error. Quick change of the driver to the Gutenprint versio should do the charm.

  • Acrobat CS3 won't print through XServe print server

    Acrobat CS3 won't print through our XServe print server when connected by AppleTalk. Everything else prints fine. You can print the same .pdf with AppleTalk through Preview. And you can print with Acrobat through any other protocol but AppleTalk. The job spools, looks like it's going through but never reaches it's destination. We have 19 printers so it's not a single printer being cranky, and 35 Macs so it's not just a single Mac. All our users are on Active Directory and all are on the same subnet and VLAN.

    Hello Scott,
    If you look at the cups error log on the Xserve, does it give any clues as to why the Acrobat spool file is failing? Hopefully there is some indication as to which process is failing and why.
    We're not using AppleTalk on our Xserve. All printer connections are set via LPR so I cannot offer any advice based on experience.
    PaHu

  • Printing through Windows 2003 server

    I'm the only Mac in the house and have been printing through our Windows 2003 server just fine until this week after my last Apple Update. When printing to any printer on our system, (I have reset printers with no change to results), I get a heading with my name, plus (RE: my job), and a bold underscore with the following message below the line:
    %%[Error: undefined; OffendingCommand: languagelevel]%%
    %%[Flushing: rest of job (to end-of-file) will be ingnored]%%
    This has only become a problem in the last week. I first noticed the problem on my G5, but I just plugged my Powerbook G4 into our Ethernet system with the same results.
    Power Mac7,3 (G5) Mac OS X (10.4.7) Windows Server 2003

    I am not aware of what drivers were used before or if there has been a change. I used the standard print utility and it identified all printers on the system and I just added them. Printing was no problem until this last week.

  • Can't see printer through windowsxp printer hp

    hello. just bought a new imac. i am trying to set up the printer - hp laserjet 3300 - mfp series (usb). I cannot see it through the printer browser setup (more printers ..). All it shows is the windows computer(win1 say). When I choose this win1 name it says "connect to the printer "win1" as: name and password.
    But this isn't the name of the printer!! Bit confused. I didn't have to do anything special to connect the other windows xp machine to the printer (oh actually I had to run the hp cd and let it do the network finding thing- I did that on mac but didn't give me the same network setup options)
    I can see files and connect to the windows maching through the network and I can print from other connected windows xp machines (both xp pro sp2).
    Anyway, I don't expect a response, but if there is anyone out there with similar solved problems,I'd love to hear them
    Thanks
    Martin

    Seems that the issue is something to do with connecting via WPA2. When I set Internet Sharing to use WEP (by option-clicking the security menu), I'm then able to see the network shares and the printer.

  • Can not connect to ther admin server with t3s in the WLST

    Hi,
    Our server face a strange problem.
    We want to add SSL to our server, and I have set the SSL linsten port enabled, an we can access the admin console with https protocol and SSL listen port.
    Then I want to manage the server with
    ##start WLST with DemoTrust enable
    java -Dweblogic.security.SSL.ignoreHostnameVerification=true -Dweblogic.security.TrustKeyStore=DemoTrust weblogic.WLST
    ##connect
    If I use
    connect('system','testAdmin','t3://xxxx:10001')
    ##this can connect successful.
    If I use
    connect('system','testAdmin','t3s://xxxx:10002')
    It will cause an error
    WLSTException: Error occured while performing connect : Error getting the initial context. There is no server running at t3s://xxxx:10002 Use dumpStack() to view the full stacktrace
    I both enabled plain and SSL listen port and I can access the admin console with http and https without problem. But why I just can not use t3s to connect the server in the WLST? Is there any setting related this? Please advise, thanks.
    Here is the dumpStack()
    javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3s://xxxx:10002: Destination unreachable; nested exception is:
            java.io.IOException: Stream closed.; No available router to destination]
    at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:40)
    at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:783)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:365)
    at weblogic.jndi.Environment.getContext(Environment.java:315)
    at weblogic.jndi.Environment.getContext(Environment.java:285)
    at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
    at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
    at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
    at javax.naming.InitialContext.init(InitialContext.java:223)
    at javax.naming.InitialContext.<init>(InitialContext.java:197)
    at weblogic.management.scripting.WLSTHelper.populateInitialContext(WLSTHelper.java:512)
    at weblogic.management.scripting.WLSTHelper.initDeprecatedConnection(WLSTHelper.java:565)
    at weblogic.management.scripting.WLSTHelper.initConnections(WLSTHelper.java:305)
    at weblogic.management.scripting.WLSTHelper.connect(WLSTHelper.java:203)
    at weblogic.management.scripting.WLScriptContext.connect(WLScriptContext.java:60)
    at weblogic.management.scripting.utils.WLSTUtil.initializeOnlineWLST(WLSTUtil.java:125)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:160)
    at org.python.core.PyMethod.__call__(PyMethod.java:96)
    at org.python.core.PyObject.__call__(PyObject.java:248)
    at org.python.core.PyObject.invoke(PyObject.java:2016)
    at org.python.pycode._pyx4.connect$1(<iostream>:16)
    at org.python.pycode._pyx4.call_function(<iostream>)
    at org.python.core.PyTableCode.call(PyTableCode.java:208)
    at org.python.core.PyTableCode.call(PyTableCode.java:404)
    at org.python.core.PyTableCode.call(PyTableCode.java:287)
    at org.python.core.PyFunction.__call__(PyFunction.java:179)
    at org.python.pycode._pyx15.f$0(<console>:1)
    at org.python.pycode._pyx15.call_function(<console>)
    at org.python.core.PyTableCode.call(PyTableCode.java:208)
    at org.python.core.PyCode.call(PyCode.java:14)
    at org.python.core.Py.runCode(Py.java:1135)
    at org.python.core.Py.exec(Py.java:1157)
    at org.python.util.PythonInterpreter.exec(PythonInterpreter.java:148)
    at org.python.util.InteractiveInterpreter.runcode(InteractiveInterpreter.java:89)
    at org.python.util.InteractiveInterpreter.runsource(InteractiveInterpreter.java:70)
    at org.python.util.InteractiveInterpreter.runsource(InteractiveInterpreter.java:44)
    at weblogic.management.scripting.WLST.main(WLST.java:178)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at weblogic.WLST.main(WLST.java:29)
    Caused by: java.net.ConnectException: t3s://xxxx:10002: Destination unreachable; nested exception is:
    java.io.IOException: Stream closed.; No available router to destination
    at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:203)
    at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:153)
    at weblogic.jndi.WLInitialContextFactoryDelegate$1.run(WLInitialContextFactoryDelegate.java:344)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.security.service.SecurityManager.runAs(Unknown Source)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:339)
    ... 43 more
    Caused by: java.rmi.ConnectException: Destination unreachable; nested exception is:
    java.io.IOException: Stream closed.; No available router to destination
    at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:464)
    at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:315)
    at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:251)
    at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:194)
    at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:225)
    at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:188)
    ... 48 more
    Edited by: Kaos on Feb 25, 2010 12:06 AM

    Jai/Faisal,
    One strange thing i observe, i tried connecting to admin server through WLST, it works for first time and again it gave me the error next (Connecting alternatively).
    the error message which i am getting:
    This Exception occurred at Thu Jun 10 08:19:39 CDT 2010.
    javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3s://mo8xdwls0018.bankofamerica.com:8933: Destination unreachable; nested exception is:
            java.io.IOException: Stream closed.; No available router to destination]
    at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:40)
    at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:783)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:365)
    at weblogic.jndi.Environment.getContext(Environment.java:315)
    at weblogic.jndi.Environment.getContext(Environment.java:285)
    at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
    at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
    at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
    at javax.naming.InitialContext.init(InitialContext.java:223)
    at javax.naming.InitialContext.<init>(InitialContext.java:197)
    at weblogic.management.scripting.WLSTHelper.populateInitialContext(WLSTHelper.java:512)
    at weblogic.management.scripting.WLSTHelper.initDeprecatedConnection(WLSTHelper.java:565)
    at weblogic.management.scripting.WLSTHelper.initConnections(WLSTHelper.java:305)
    at weblogic.management.scripting.WLSTHelper.connect(WLSTHelper.java:203)
    at weblogic.management.scripting.WLScriptContext.connect(WLScriptContext.java:60)
    at weblogic.management.scripting.utils.WLSTUtil.initializeOnlineWLST(WLSTUtil.java:125)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:160)
    at org.python.core.PyMethod.__call__(PyMethod.java:96)
    we are connecting to t3s://mo8xdwls0018.bankofamerica.com:8933.
    Any help would be appreciated.
    -Vishal Iyer

  • Can you use Multi Factor Authentication server with Central NPS and RD Gateway?

    Hi,
    Does anyone have any experience getting the Azure Multi-Factor Authentication (MFA) on-premise server, working with a Remote Desktop Gateway server, and a centralised NPS server?  I can get a solution whereby a user can get the second token (phone call/sms
    etc.) but the connection never gets established.  It looks like its looping as it repeats the phone call/text for a second time but again no connection.  I can’t figure out why.
    All the blogs are very vague as to whether you can combine a new MFA NPS connection policy with an existing username/group membership NPS policy on a centralised NPS server (with RAP/CAP policies).
    I need to understand whether we can combine both an MFA Radius policy with a Username/Password plus group membership NPS policy together to achieve two factor authentication.
    Do you have the Remote Desktop Gateway Server connect to the Central NPS server and then the NPS server use the MFA server as its proxy server? In effect turning the NPS server into a proxy Radius server?  
    Or do you configure the Remote Desktop Gateway server to use the MFA server as the proxy Radius server, and configure the MFA server to send on Radius requests to the central NPS server?
    Or either of these scenarios not supported and you can only use the MFA server as the only Radius server in the auth. process? (bypassing NPS policies?)
    Thanks if someone can assist,
    I’ve been using these blogs but to no successful effect:
    http://technet.microsoft.com/en-us/library/dn394287.aspx
    http://www.rdsgurus.com/uncategorized/step-by-step-using-windows-server-2012-r2-rd-gateway-with-azure-multifactor-authentication/
    http://dave.harris.uno/installing-and-configuring-azure-multi-factor-authentication-mfa/

    Hi Michael,
    Thank you for posting in Windows Server Forum.
    After going through your description, I can say that we can use MFA server with central NPS and RD Gateway. Also the link which you have provided points the step to apply. In addition you can refer below article.
    Configure Remote Desktop Gateway to use Multi-Factor AuthenticationConfigure Remote Desktop Gateway to use Multi-Factor Authentication 
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • Can I replace OSX 10.6 Server with OSX 10.7?

    I recently bought a new Mac Mini. I didn't read closely and when it arrived it was loaded with OSX 10.6 Server. I'm using this mini in a home environment and really have no need (as far as I know) for the Server version. I would like to just have this Mini function normally. I loaded 10.7 on my MBP this afternoon and tried doing the same on the Mini. I get a message in the App Store saying I have to buy the Server version of 10.7 at $79.
    Is there any way I can just install 10.7 non-server version on this Mac Mini?
    Thanks.

    you can but dont.  Apple has totally screwed the pooch with this release.  apple has gone windows. Nothing works after the upgrade.  open directory-broken,  softwareupdate-broken, AD plugins for OD- broken, open directory replica- broken.  Stay away from it for as long as possible. 
    Way to go Apple.  awesome job.
    maybe if Apple listened to the enterprise level admins and actually acted on the pain points server software like this would nt be released.  Why is it that when i upgrade my servers that nothing gets migrated over.  I lostevery single one of my settings when the box came back up. Did apple even test the osx 10.7 server upgrade to ensure trouble free upgrades? where there tests done to make sure that when your server(which is in an enterprise most likely) is upgraded that functionality wasnt taken away?  truley disappointed

  • Printing through Windows on Mac with printers set up on Time Capsule?

    I have my printer hooked up to Time Capsule and can print from my Macbook to it no problem. I would like to print from Windows (on my Macbook through Fusion) to the same printer. How do I install that printer in Windows? Do I need to use Bonjour since the printer is already on my network? The printer does not show up in Windows at all right now.
    Thanks much

    I managed to work through this problem in 2 different installations.
    In one case Bonjour did find the printer in the Bonjour Add Printer Wizard(an Epson CX-5000)
    In the second case - a Brother MFC-6800 - the printer did not show up as a choice in the Bonjour Add Printer Wizard.
    You might check that the drivers for the printer that is attached to the TC are installed on the Windows system.
    In this case I know the Brother drivers were installed but they don't seem to support a remote print server set up. However, the Bonjour Add Printer Wizard offered 2 choices - a generic PCL and a generic PS printer. I chose the generic PS printer and that worked....
    Printing with a print server - which is what we're talking about here - is something that some printers do better than others. In my experience some printers, particularly their Windows drivers, sort of do their own thing which isn't conducive to playing by the rules which is important with print servers.

  • How can i use my synology iTunes Server with the iTunes from my iPad?

    Have anybody the Same Constalation @ home? I like to have Access to my synology iTunes Server from my iPad via iTunes without a thirdparty App, to have Access to the Central Data like Music, etc.? Have some One expirence with the configuration and implementation?

    It will almost certainly not be possible. If you don't sign up for AT&T service for the iPad, then replace your Sprint card with a MiFi or Overdrive device from Sprint. This will use your Sprint service, but connect to your iPad using Wi-Fi. It also has the advantage of you being able to use it with any Wi-Fi capable device. IOW, you can use both your laptop and iPad at the same time with the MiFi or Overdrive, but only have to pay for one Sprint account. Of course, all devices that connect to the MiFi or Overdrive will use up your 5GB allotment, unless you use Overdrive in a 4G area. (Overdrive is unlimited on 4G, but has a 5GB cap in 3G areas.)

Maybe you are looking for