Can't Print to Canon ImagePROGRAF 600 with IMAC running Mavericks

I have a new IMAC running Mavericks connected to a networked Canon Plotter. I can plot to it using my old MacBook Pro running snow leopard with the 2009 Driver Ver. 2.17. And my office mate can print to it using a 2009 IMAC running mavericks with the 2012 Driver and ver. 3.10. When I go to print, in the page set-up of the print window I can only select MANUAL for the paper feed, I can't change to cassette or Roll, and then an alert pops up saying: "Manual is not available..."
If I ignore that and continue trying to print I get a printer error message say: "Open error: Try turning the printer off and back on again..." This doesn't work either.
I've tried going backwards in software generations but that only creates more problems. The Mountain lion version allowed me select MAUAL or CASSETTE in the page set up window but then the ImagePROGRAF Preview said "That function is not support by this printer." Has any one experienced this and solved it? Thanks.

lambarena wrote:
When I go to print, in the page set-up of the print window I can only select MANUAL for the paper feed, I can't change to cassette or Roll, and then an alert pops up saying: "Manual is not available..."
I think this could be related to a communication problem between the Mac and iPF. I don't have an iPF600 but do have an iPF8400 and iPF9400S. I downloaded the v3.10 driver for 10.8 and installed it on 10.9.5. I then created a dummy IP address and selected the iPF600 driver. When I first tried to print I got the following pop-up.
As this IP address was not connected to any printer I cancelled this window and then found the same symptom as you i.e. Only having Manual and selecting it resulted in an error window appearing. I also found that when I changed to the Main menu, the Media Type drop menu was stuck at Plain Paper.
I then created another printer to the iPF8400 but using the iPF600 driver. When I selected to print, I got the pop-up again. This time I entered my password and then found that the drop menus worked in Page Setup and Main.
So when you added the iPF600 to Printers & Scanners, did you get the pop-up above?
Also, if you select the Main menu, is the Get Information button available?

Similar Messages

Wifi issue with iMac running mavericks 10.9.4

I have a 2010 iMac running Mavericks 10.9.4 and am having constant issues connecting with the wifi. If I turn the wifi off and back on I can load 1-2 pages, then it will not load pages, the connection is dropped. The problem is not the router, wifi connection is fine on my macbook running mountain lion and on my iPhone. The settings are correct, it shows that the wifi is connected, PHY mode: 802.11n, Security is WPA2, transmit rate: 117...
Help please...

Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Step 2
Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
Step 4
Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
Step 5
Reset the System Management Controller.
Step 6
Reset the PRAM.
Step 7
Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
Step 8
Make a "Genius" appointment at an Apple Store, or go to another authorized service center.

Can anyone print photos from dvd created with imac?

hi,
If I burn 400 JPEG photos in a dvd using iMac, can any one be able to print those JPEG's?
I am going to photograph a wedding and it is essential that the JPEG show impeccable... how should I proceed?
thanks for your answer.
Angie.
www.photographyangie.com

If you create slideshows of the photos in iDVD via the "+" button:
and burn a video DVD disc the only possible copy anyone could get would be a screen shot of the DVD playing on a computer and that would be a small, low resolution (~72 dpi) image that would not be much good for printing anything other and a very small copy.
Create slideshows of 95 slides or less by importing the photos into an iDVD slideshow. Before importing crop the photos to the 4:3 size ratio that iDVD uses. You can create multiple slideshows in one iDVD project:
If you create slideshows in iDVD from still photos the viewer will be able to advance forward and backward one slide at a time with the Forward and Back buttons on the DVD player's remote tool.
If you create a movie of the photos and add that the only option is to fast forward or fast backward in the resulting movie.
In addition, follow the workflow below to help assure the best qualtiy product:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

BEST PRINTER TO PURCHASE FOR USE WITH IMAC OSX LION V 10.7.4

I NEED TO KNOW WHAT PRINTER IS BEST TO USE WITH IMAC RUNNING OSX LION V 10.7.4. THERE WERE NO SUCH THINGS AS COMPUTERS WHEN I WENT TO SCHOOL. I AM A NEW APPLE/MAC USER. SO PLEASE I AM IN NEED OF A ALL-IN-ONE IF POSSIBLE BUT IF THERE IS SOMETHING THAT IS VERY EASY TO USE WITH IMAC OSX LION 10.7.4 AND A USB CABLE THATS OK TOO. THE CATCH IS MY PRINTER DIED SO IT NEEDS TO BE PURCHASED AT WALMART TONIGHT. SO I NEED SEVERAL POSSIBLITIES PLEASE HELP THANKS, JDLASK

JDLASK wrote:
I WOULD RATHER NOT PAY MORE THAN ABOUT $125.00 IF POSSIBLE.
Please don't use all Caps. It's considered shouting. And please don't keep doubling up on your posts.
Thanks
Pete

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

Can not print PDF file at all with Windows Vista

I have Acrobat Reader 9.3.2. I am working off of Windows Vista on my laptop to a network wireless printer (Brother MFC 9440). I am unable to print pdf files. About a week ago, we had problems with our printer printing anything. I had to uninstall it and reinstalled it and it now works fine except the pdf files. I have had no problems printing any other files on any other programs but this one. I am unsure what specific "updates" I ran while trying to figure out printers issue. When in Reader, everything seems normal. When I hit print, the printer box pops up as normal and then I hit ok, my printer icon at bottom pops up for about 5 secs and nothing happens. I know that I am connected to printer due to all other programs can print. I do not have access to another printer to see if pdf will print on another printer, but do know that the other two computers used in this office (mac laptop and mac desktop) both are able to print pdf files to this printer without a problem. I have gone thru all the other help steps to try to resolve the situation: it still will not print when I hit "print as image", made sure that my printer is marked as network and is default printer, made sure to check that I have all upgrades, etc. I am not getting any error message, so am unsure what is wrong. It just will not print. Is there anyone that could give me some suggestions that I have not tried? I would REALLY appreciate it! Thanks!

Another user experience exactly the same issue with vista and printing from Adobe reader.
http://forums.adobe.com/thread/642000?tstart=1 Its copied below as a reference.
The problem was on my Auntys PC, and yes i did updated Adobe Reader to v9.3.2 and still the same issue underlned below.
My Aunty lives 70 miles away so will not be trying anything else.
The printer works fine with every other application only Adobe Reader files will print.
May 19, 2010 7:31 AM
Can not print PDF file at all with Windows Vista
I have Acrobat Reader 9.3.2. I am working off of Windows Vista on my laptop to a network wireless printer (Brother MFC 9440). I am unable to print pdf files. About a week ago, we had problems with our printer printing anything. I had to uninstall it and reinstalled it and it now works fine except the pdf files. I have had no problems printing any other files on any other programs but this one. I am unsure what specific "updates" I ran while trying to figure out printers issue. When in Reader, everything seems normal. When I hit print, the printer box pops up as normal and then I hit ok, my printer icon at bottom pops up for about 5 secs and nothing happens. I know that I am connected to printer due to all other programs can print. I do not have access to another printer to see if pdf will print on another printer, but do know that the other two computers used in this office (mac laptop and mac desktop) both are able to print pdf files to this printer without a problem. I have gone thru all the other help steps to try to resolve the situation: it still will not print when I hit "print as image", made sure that my printer is marked as network and is default printer, made sure to check that I have all upgrades, etc. I am not getting any error message, so am unsure what is wrong. It just will not print. Is there anyone that could give me some suggestions that I have not tried? I would REALLY appreciate it! Thanks!

How can I print and email a report with a logo?

How can I print and email a report with a logo?
Is this possible??

hi ravikant!
im talking about reports, not forms.
i bet se78 is for forms and oaer is for report.
because my logo is displayed on screen, using html-top-of-page.
but at the time of printing and email, internally, alv grid is converted into alv list, and alv list doesn't support having a logo.
That's my know-how of the situation.
Do you have a way with it???
Please advice.
Thanks a lot!

Can you print from an I pad with a cable?

Can you print from an I pad with a gable?

First, AirPrint is not something you buy. It's built into iOS.
Second, John asked if you could print from an iPad with a cable:
Can you print from an I pad with a cable?
Third, in your reply to me, you said "you can" which would imply that one can print from an iPad via a cable, which again cannot be done.

Unable to print to Canon ir2022i after 10.9.1 mavericks update.

Hi, we are unable to print to Canon ir2022i after 10.9.1 mavericks update. Can anybody help to find a driver update which works with mavericks.

http://www.usa.canon.com/cusa/support/office/b_w_imagerunner_copiers/imagerunner _2016_2016i_2018_2018i_2020_2020i_2022_2022i_2025i_2030i/imagerunner_2022#Driver sAndSoftware

My older iMac running Mavericks 10.9.4 shuts down when it connects to the internet. Resetting the SMC doesn't help. What can I do?

My older iMac running Mavericks 10.9.4 shuts down when it connects to the internet. Resetting the SMC doesn't help. What can I do?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I have a mid-2011 iMac running Mavericks. When I click restart the computer goes to a white screen with a spinning circle and does not go any further until I hold down the power button to turn it off. What do I do?

I have a mid-2011 iMac running Mavericks. When I click restart the computer goes to a white screen with a spinning circle and does not go any further until I hold down the power button to turn it off. What do I do?

Ok, sounds like the safe mode boot worked... You probably don't want to always be in safe mode though (some reduced functionality) so does it do a normal boot now? If not, you should then reboot into safe mode and run Disk Utility. Then select Macintosh HD on the left hand side, and click the Verify Disk button. If needed, it will ask you to Repair Disk. If there are errors found, Repair Disk again until there are none. Then try another normal boot and reply with result, wether good or bad.

I can't install pages 09 on a recent iMac running 10.9.1.

I can't install pages 09 on a recent iMac running 10.9.1. I am using a retail dvd - I get the error message that the "installer is damaged".
Any suggestions? THANKS

Open your System Preferences and go to "Security & Privacy". In the General tab set "Allow apps downloaded from:" to Anywhere. (You may have to click the lock and enter your administrator password first before you can make this change).
Now try the installer again. Make sure you change the setting back to it's previous setting when you are done and check the App Store for any updates to your iWork apps before you start using it.

Can't print to Canon LBP7200Cdn after Lion upgrade

Since upgrading to Lion, I can't register (and therefore can't use) my office printer, a Canon LBP7200Cdn.
I tried for weeks to get it to work with the interim driver Canon released with Lion, then gave up and waited for the full driver. Then that didn't work either.
Installation of the driver appears to work fine, but once the printer is registered, printing from any program gives me the error message "/Library/Printers/Canon/CUPSCAPT/Bins/capdftopdl failed".
The problem is the same whether connecting via USB or IP.
I had the same problem when I updated to Snow Leopard 10.6.7, but installing Canon's new driver fixed it. Now nothing works and I haven't been able to print since the summer. No other Mac users are having this problem (but I'm the only one running Lion). Would welcome help from anyone.
Here's the System Profiler info on the printer:
10.0.0.6:
Status:          Idle
Print Server:          Local
Driver Version:          3.40
Default:          Yes
Shared:          No
URI:          cnbma://localhost:59687
PPD:          Canon LBP7200C CAPT (UK)
PPD File Version:          3.40
PostScript Version:          (3010.000) 550
(3010.000) 651
CUPS Version:          1.5.0 (cups-297.2)
Fax support:          No
Scanning support:          No
Printer Commands:          none
CUPS filters:
capdftopdl:
Path:          /Library/Printers/Canon/CUPSCAPT/Bins/capdftopdl
Printer utility:          /Library/Printers/Canon/CUPSCAPT/StatusMonitor/StatusMonitor.app
Printer utility version:          3.40
PDEs:
FinishingPDE.plugin:
Sandbox compliant:          No

I'm having the same issue. I've re-installed the Canon software after deleting all of the folders & files that they talk about in the user manual.
Same issue. /Library/Printers/Canon/CUPSCMFP/Bins/capdftopdl failed
I've sent a note to Canon and here's their first reply.
Thank you for contacting Canon technical support. We value you as a Canon customer and appreciate the opportunity to assist you. We regret that you are experiencing difficulty printing to your imageCLASS MF3010.
We will gladly provide assistance. Unfortunately, it is not clear what is causing this. We will gladly help troubleshoot to isolate the cause:
1. Is the printer connected directly to the computer or through a print server, USB hub or other external device?
Directly to the computer with USB
2. Can you make copies without using your computer? This will verify if the printer is working.
Don't know waiting for my folks to try this.
3. Are you installing drivers from the CD disk or downloading them from the Canon website here:
Downloaded from the website. No Mac sofware on the CD supplied with the printer.
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/imageclass _series/imageclass_mf3010#DriversAndSoftware
With this information, we will be able to better assist you.
We look forward to your reply with the information we have requested regarding your imageCLASS MF3010.
Thank you for choosing Canon.
Sincerely,
David
Technical Support Representative
Special Note: Certain issues are very difficult to resolve via email. If you would prefer to speak to a technician for additional assistance, you may call our special toll-free number for email customers with unresolved issues by dialing 1-866-261-9362, Monday - Friday 8:00 a.m. to 8:00 p.m. ET (excluding holidays). If you prefer to continue to communicate via email, reply to this message and we will respond as quickly as possible.

Can't print to Canon iR C4080

I'm running 10.6.4. I am trying to add the Canon iR C4080 that is at my office so I can print to it from my MacBook Pro. I downloaded the latest driver from Canon's website and successfully installed it. I added the printer via System Preferences using LPD and the printer's IP address and selected the printer from the driver list. The printer utility says the printer is ready. Yet when I try to print to it, the document appears in the queue for a second or two, and then disappears. It does not print. What can I do to fix it? I have no trouble printing to the networked hp LaserJet 4000, but the iR is the only color printer in the office. Can anyone help me out?

Hello Peter. There are three possible causes I can think of that could stop the job from printing.
1. The iR C4080 only supports the UFR2 printer language and you are using the Postscript driver or PPD.
2. The iR C4080 does support Postscript but the device has Department ID management enabled.
3. The iR C4080 is using the optional imagePASS-H1 (Fiery) instead of the internal Canon printer board.
With regards to all three above the easiest way to check the configuration of the iR C4080 is to open your Internet browser and enter the IP address of the copier for the URL. This will connect to the internal web page of the iR C4080. If you see an imageRUNNER logo in the top left corner of the displayed page and a row of buttons underneath, such as Device Information, Mailbox and Additional Functions, then the machine is using the internal Canon board. If however you see an image of a small white box then your copier is using the imagePASS-H1. Now for this print controller you can usually download the Mac and Windows drivers from the device itself (you would see a Download tab if you have this controller fitted). However the Mac driver included with the device is not compatible with 10.6 so you will need to check the Canon web site again for an updated driver.
If the iR C4080 is using the internal Canon print controller then we need to check that it has Postscript (or alternatively you can download the UFR2 driver from the Canon web site). With the web page displayed you can click on Additional Functions and then Custom Settings (you may get prompted for a ID and password at this point). With the Custom Settings view displayed, on the right hand pane under the heading of Printer Settings will be the print options the device supports. If you see PS then this confirms you can use the Postscript driver. If you only see UFRII, and possibly PCL, then you cannot use the Postscript driver or Canon PPDs. So check the Canon web site again for the UFR2 v2.x driver for 10.6.
If the copier does have Postscript support but is using Dept ID management, then you can only use the Canon PS driver. The Canon PPDs don't support this facility. You can check via the internal web page if Dept ID is being used under the Custom Settings view. Another way to check is simply walk up to the copier. If you need to enter an ID and password to make a copy then it most likely has Dept ID enabled (or some other third party access control system). If it is Dept ID, then with the PS driver you need to select to print and change the menu in the Print dialog to Special Features. Here you will see an image of the copier. Press the Printer Info button under this image. This will make another window appear that will show if Job Accounting (aka Dept ID) is enabled. If it is enabled, then when you okay this window and the view returns to the Special Features tab you should see the Job Accounting checkbox and it will be enabled. Next to it will be the Settings button. Press this to open the section where you can enter the ID and password. You can also enable a setting that will make a confirmation window appear every time you print, in case there is different IDs you need to use.
Well I believe I have given you enough to get this working on your MBP. Please reply if you need more assistance.
Pahu

Can't print to Canon IPF610 after upgrading to Mavericks. HELP!!

Since updateing to the OS 10.9 Mavericks, I am no longer able to print to my Canon IPF610 Large Format Printer. I tried upgrading the driver at the Canon website for the OS 10.9 but it's still not working.

I already know about this and this solved my problem 2 years ago when I hooked up the printer for the first time. Now after installing the Mavericks update, it keeps saying the printer isn't connected. I tried using a different ethernet cable, unplugging and plugging printer back in and still the same problem. I can still print to it from my old Apple G5 tower using 10.5.8 and was even able to print with no problems on my Intel iMac using the 10.8. I installed the updated driver for 10.9 on Canon's website and still get the same problem.

Can't Print to Canon ImagePROGRAF 600 with IMAC running Mavericks

Similar Messages

Maybe you are looking for