Can't publish changes after updating to '08

I just updated to iLife '08 and was able to publish, though none of the new material came through. Does anyone have suggestions?

If you are publishing to .Mac, iWeb '06 published to Finder/Go/iDisk/My iDisk/Web/Sites/iWeb and iWeb '08 publishes to Finder/Go/iDisk/My iDisk/Web/Sites.
Go to Finder/Go/iDisk/My iDisk/Web/Sites and see if your new folder is there. Double click the index.html file to launch your site from .Mac to make sure all is well.
The URL to get to your updated site will now have the format ....
http://web.mac.com/username/websitename/pagename.html
Enter your URL in the browser, launch your website and bookmark it.

Similar Messages

  • Can't publish changes - buttons disabled

    Dear all,
    I can not publish changes to my sitethrough iWeb. The buttons are disabled to publish and I have no ideawhat to do... I have to update my website! I have 2 mac computers athome, but just one of them is with all the site that I've donebefore. It's EMMANUELEBALDINI.ME
    I have Time Capsule also, but I don'tknow how to copy the whole site in it.. and also, how to update mywebsite.
    First it has appeared UNKNOWNPUBLISHING ERROR OCCURS. THE DISK MAY BE DAMAGED, FULL, OR YOU MAYNOT HAVE SUFFICIENT and I tried to cancel some dates to fix thisproblem and now it doesn't appear this message, but the buttons andthe option to publish the website don't appear.
    Some help?
    Please...
    Fernanda

    First we need some details:  where are you hosting the site? Have you visited the site to see if the changes have been made?  Try clearing your browser's cache (Command+Option+E for Safari) and relaod the site.
    Have you tried publishing your site to a folder on your hard drive?  If not do so.
    A first fix attempt can be the following:
    delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home() /Library/Preferences folder.
    go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
    launch iWeb and try again.
    OT

  • Re: Personal Account number changed after update

    Personal Account number changed after updating Virtualstore and now I can't login with my current account information. Changed from 35482 to 35555

    i have created already an account after reset but then asked for an update. I did it and now asks for username and password :) still says incorrect username/pass

  • My iPhone 4 can not find network after updating to 7.0.6

    my iPhone 4 can`t find network after updating to 7.0.6. i`ve reinstalled system, but nothing`s really changed.

    iPhone 4S: I have the same problem. After updating to iOS 7, wifi worked for some time, and then it stopped working. I can't even enable wifi. I just updated to iOS 7.0.2 and it didn't help at all.

  • Can not access BIOS after update BIOS

    Can not access BIOS after update X220 BIOS to version 1.19
    Type: 4290-R32
    BIOS: 1.19
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8duj09uc.txt
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8duj09uc.iso
    Ask google and try anyway but not work
    - Press ThinkVantage, Press F1, Press Fn+F1
    - Power off, unplug AC, unplug battery, wait 15 miniute, try all again
    - Try to update BIOS again

    That is really weird.
    When you are in Windows, can you test and see if the F1 key is working? If it is working. Shut down the laptop then boot it back up. At the Thinkpad screen, keep spamming the F1 key and see if you are able to boot into BIOS.
    //JameZ
    Check out the Community Knowledge Base for hints and tips.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    X240 | 8GB RAM | 512GB Samsung SSD

  • We can't package links after updating to Mac 10.9.2

    We can't package links after updating to Mac 10.9.2

    From the Mail menu bar, select
    Window ▹ Connection Doctor
    Click the Show Detail button. A drawer opens. Try to send a message and post the text that appears. Anonymize any personal information before posting.

  • Can not get email after updating to 8.1.1! Deleted account and now cannot add as will not verify due to Apple something timeout messages? Any one else having problems?

    Can not get email after updating to 8.1.1! Deleted account and now cannot add as will not verify due to Apple something timeout messages? Any one else having problems?

    Hi tania184,
    Have you contacted your email provider to make sure there are no problems on their end? If they say their email servers are working properly, check the outgoing and incoming mail servers entries on your iPhone to make sure both are entered correctly. Enter the outgoing mail server even if the account setup indicates that is optional.

  • Can ASN be changed after published?

    HI, exports
          Could you tell me if ASN can be changed after puhlished and how to do if it could?
         Thanks
         Jesse

    Hi, Nikhil and shankar
       thank you very much ,   published ASN change has been worked as you said.
       But ,  the idoc in ECC about DESAD  occured error while updating.
      /SPE/ID_HANDLING 125   Error during inbound delivery modification
      /SPE/ID_HANDLING 101   You cannot change status of inb. dlv. head 0180000490 from 'non-hold' to 'hold'
       /SPE/INBVAL  038    Replacements only accepted for warehouse of type EWM or in TPOP scenario.
      Do you give some support?
      Thanks
      Jesse

  • URGENT: Can't publish app after November update - Project Siena

    Hi,
    I have several apps that I want to publish, but am unsuccessful.
    After update in November came out my Siena refused to publish so I reinstalled it from the App Store just now. Even though I did this, in the new version, the same message keeps appearing.
    Why can't I publish?
    This is pretty urgent, as I need to present the apps in 24 hours to our customer.  My ass is on the line...
    Any help appreciated - BIG THANKS
    Peter

    Peter,
    I'm not sure if you're working with a company issued device that may have restrictions which are causing you problems (we've seen this in the forums for previous versions) and considering you have a short turn-around, have you tried installing Project Siena
    on another PC?
    Another route would be to set up a virtual machine and install Siena.  Microsoft offers 90 day virtual machines in various platforms that may help in getting things set up quicker:
    https://modern.ie/en-us/virtualization-tools#downloads
    Thor

  • Language change after update to Lightroom 3.2! Help asked!

    I use Lightroom from the first version and love to work with it. I always work with the English version of it - for several reasons - even when my Windows XP version is in Dutch.
    By upgrading to Lightroom 3.2 I selected the English language. After the update my version of Lightroom 3.2 however was in Dutch. I tried to change that to English following the help file, but that does not work
    This unwanted change gives me a lot of trouble now as I normally import my pictures with a filename in the date-number format. But the date format in the Dutch version is day-month-year, as I however want to use - and used for over 50.000 pictures!!! - the year-month-day format. I had no trouble with it in Lightroom 3.0. My trouble began after updating to Lightroom 3.2.
    Can anyone help me here, as I cannot import pictures I made in the right format now!!!
    Ton Soneveldt

    The answers is in this thread: http://forums.adobe.com/message/3042985#3042985.

  • Can't open iPhoto after update....

    After the update I can't access iPhoto, says it's on a locked disk and I can't make changes, but it won't even open

    What update? With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what update did you apply?
    what version of iPhoto are you currently using?
    what system version are you running?
    what do you see when you try to open iPhoto?
    what fixes have you tried?
    where is your library located?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    Happy Holidays

  • Can't replace APN after updating to OS4. It still remembers "Disable3G...."

    Can't chage APN configuration after updating to OS4. Already tried iConfiguration program but it does not work. The screen appear "Profile failed to Install - Only one APN configuration can be installed at a time."
    I guess it was from the profile that I installed from iphonenodata.com. I did not remove the profile before I updated to OS4. I can't see the APN field when I use my main number which is the Apple official carrier in Thailand (DTAC). I made a try by using AIS simcard as I can see APN input. I could change the APN and use GPRS. But once I replaced the sim card back to DTAC, the "disable" profile comes back again.
    Please suggest. Or do I need to reset as new phone? But .. then how can I get all contents back? I have so many data i.e. personal finance, health, etc.
    Many thanks,

    Now I solved the solution!!!!
    Refer to this post http://discussions.apple.com/thread.jspa?threadID=2470873&stqc=true
    To briefly saying, I deleted the file 8218978e4ab0a48035bb92653145a6be872ea858 in the backup directory. Then I restored from the backup (without backing up again during the restoration, if iTunes asks). As per "Loveturtle" in the mentioned post said, the file 821xxx contained the corrupted APN. If you want to try it out, read the post for clearer explanation.
    However, I didn't success at the first attempt. I did it twice on my laptop and once on my office PC, and succeed on the latter. Not sure what happened for the first two attempts. The results: everything's back (contact, sms, app data, photos), but music and video gone but I can sync from my iTunes later. Only annoying just the messy app icons arrangement. MMS not working if Cellular Data is off - but that's what it is supposed to be as an original setting device.
    Good luck!

  • Can't send mail after update to 5.0.1

    After updating to 5.0.1, I can no longer send composed mail or respond with a reply. Works fine if I go out of mail, open AOL from safari. When I try to send from mail, a box opens stating message sent to outbox as respondant does not allow relays. Any ideas???

    Tried this, no difference. I was on the Apple Care service for over 1 hour with same result, no change. Any reply or new composed mail is sent to the outbox file, message states, " a copy has been placed in outbox. The recipient ...... Was rejected by the server because it does not allow relaying." same reply or message sent from mail started from safari goes through perfectly.

  • Can't publish changes to live site. Keep getting error message.

    I can't publish small changes to live site.
    Looks good in preview but won't publish
    Deleted 2 photos and added 2 words.

    The error went away over the weekend but now when I update/publish and then go to the site the changes don't appear.

  • 6300 Contacts cannot be changed after update to fi...

    Hi, I updated the firmware and since then I cannot change an existing contact.
    Has anybody else experienced that problem?
    Best,
    schottide

    Hi,
    I found a solution myself. Now my contacts can by synchronized.
    Here are the steps I made to get rid of "corrupt" contacts:
    - udate firmware to version 5
    - make sure you use the phones memory for contacts
    - look at: Contacts -> Settings -> Memory in use
    - move all contacts from phone to SIM card
    - Names -> Options -> Mark all
    - Options -> Move marked
    (If you have more than 100 contacts its ok, only 1000 will be moved)
    - change phones memory for contacts to SIM
    - Contacts -> Settings -> Memory in use -> Sim Card
    - move all contacts from SIM card to phone
    - Names -> Options -> Mark all
    - Options -> Move marked
    - change phones memory for contacts to phone
    - Contacts -> Settings -> Memory in use -> Phone
    After I did that, I can now sync my contacts...
    Disadvantage: If you have more than one telephone-number associated to a contact it will be split into several contacts. E.g. Tom Miller will bei Tom Miller1 Tom Miller2. But this can be easily changed on the pc afterwards...
    schottide

Maybe you are looking for

  • Using APEX_COLLECTION in a DB-Function??

    Hello, in Apex I would call a PL/SQL page process (anonymous block), which invoke a database function (called A). This db function, A, invokes a further db package via database link on a remote database. The package on the remote database writes its

  • Sound set to stop but keeps playing

    I am creating a progressive download movie for the web using the flv. In a new Flash doc, I have an imported .mov on one layer, that was created and exported from a different Flash doc. I have an mp3 on the layer above the imported .mov. The movie pl

  • "Invalid Thread Access" - Consuming WSDL in OSB

    Hi, Creating a business service I am trying to define the service type by consuming WSDL. I get the error "Invalid Thread Access" with no additional details. The URI is accessible in my browser and works when i import it into jdeveloper. through soap

  • HP ProBook 4430s Operating System (Windows 7) wont Start UP)

    Hello I have HP ProBook 4430s which i got not long ago but got a major problem with it which is i have encrypted the HDD with the system always requirement a password or a swipe of finger on the reader up windows booting. Now, if you enter the passw

  • Sequencing in functions

    I have a function that hides a horizontal rule, moves it relative to the currentTarget, and makes it reappear. The showEffect on the HR is an instance of the WipeRight effect, and the hideEffect is an instance of the WipeLeft effect. So, in essence,