Can't publish -- ".mac member name is not correct"

Hi everyone,
I am no stranger to iCal publishing, I have been using it for many years for business and personal use.
I came across a confounding issue today: my personal calender wouldn't refresh to my .mac account. I thought it might just be an issue of my internet connection at the moment, but a few hours later still the same problem. I unpublished the calendar and attempted to republish, but an error came up :
"Calendar could not be published. .Mac member name is not correct. Publishing to .Mac requires a properly configured .Mac account."
Okay, so I followed the button to my System Prefs, checked to make sure I was logged in. All that was fine, resync'ed just in case. I retyped my .mac username and password to make sure, but the error still comes up. I went online and checked...everything is working, mail, homepage, etc. but iCal refuses to publish. Restarted, repaired permissions, quit and restarted iCal...still nothing.
I can safely say I am stumped by this. Anyone have an idea?
Thanks!

Well, it seems that the system has fixed itself...the calendar published without incident today. I guess it wasn't on my end!

Similar Messages

  • Backup 3.1 V356 .Mac member name or password is not set

    Hello,
    I recently changed my .Mac Password and since I have done so, backup fails with .Mac member name or password is not set when I try and backup my personal data to my iDisk.
    I read on the Backup help to delete all associations with .Mac in the Keychain, which I did (I had this error before deleting the Keychain error: Invalid .Mac user name or password
    Unable to complete backup at this time.) I believe I deleted all of them and now how the Member name or password is not set. My way of trying to fix this was by going to the finder and clicking on the iDisk. I did this, it prompted me for the Username and Password, I re-opened backup and still no joy.
    Can anybody else think of anything?
    Do I need to delete backup and re-install it or something?

    Things to try
    System Preferences in the Internet section, under the Account table, re-enter your .mac email address and password
    On your hard drive go to Library/Keychain and see if there are any values for .mac
    JTS

  • Try to publish ical - error "your .Mac account information is not correct"

    I try to publish a calendar from my home computer so that I can see it on my work laptop (both Macs); and I get an error "Your .Mac account configuration is not correct. Calendar could not be published. Your .Mac account information is not correct. You cannot publish to .Mac until you have configured your .Mac account." Its setup and configured. Any ideas?

    I had the same thing and did the following two things which got it to publish. Not sure which one fixed it but give it a go.
    1. Open your .mac pane in system preferences. Sign out and sign back in.
    2. Change the name of the calendar you're trying to publish.
    Good luck!

  • Can I install Mac OS X Leopard (not the server version) on a Xserve?

    Hi all.
    Can I install Mac OS X Leopard (not the server version) on a Xserve and run BootCamp (to use Windows), and other Mac applications like FileMaker, Toast, iWork, e.g.?
    Thanks in advance.

    Can I install Mac OS X Leopard (not the server version) on a Xserve
    Yes, but some functions may not work as intended. See here for some information; all Mac OS X 10.5 installations are universal binary.
    and run BootCamp (to use Windows)
    Probably not. Use a program such as Parallels Desktop.
    and other Mac applications like FileMaker, Toast, iWork, e.g.?
    Yes.
    (25942)

  • Windows vista home premium service pack 2.error measage __(the windows installer service could not be accessed.this can occur if the windows installer is not correctly installed .contact your support personnel for assistance )no error nurber

    windows vista home premium service pack 2。error measage __（the windows installer service could not be accessed.this can occur if the windows installer is not correctly installed .contact your support personnel for assistance ）no error nurber

    Hi Abdallah,
    According to your description, could you please post the summary and detail logs for further analysis? By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
    Usually, the error occurs when the Windows Installer Service is not running or the Windows Installer registry settings are corrupted.  I recommend you reset the Windows Installer Service settings in the registry and restart the Windows Installer Service,
    then reinstall SQL Server 2008 R2. For more details, please review this similar
    article.
    Thanks,
    Lydia Zhang

  • ERROR: The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance.

    Hello Everyone,
    I keep getting this when trying to install 0r repair SQL Server 2008 R2 on a SBS  2011 Standard.
    TITLE: Microsoft SQL Server 2008 R2 Setup
    The following error has occurred:
    The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance.
    For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1&EvtType=0xDF039760%25401201%25401
    BUTTONS:
    OK
    the provided link says  "There is no additional information about this issue" i am helpless
    please tell assist.
    Thanks.
    Abdallah.M.M

    Hi Abdallah,
    According to your description, could you please post the summary and detail logs for further analysis? By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
    Usually, the error occurs when the Windows Installer Service is not running or the Windows Installer registry settings are corrupted.  I recommend you reset the Windows Installer Service settings in the registry and restart the Windows Installer Service,
    then reinstall SQL Server 2008 R2. For more details, please review this similar
    article.
    Thanks,
    Lydia Zhang

  • Some songs can be found by Song Name, but not by Artist ?!

    I have 3 Neil Diamond songs in my iTunes library, and all of them were sent to the iPod during syncing. Now on my iPod if I search by artist "Neil Diamond" I only see one of the songs. The songs really are on the iPod because I can find them by Song name and play them.
    I tried setting the Artist to Neil Diamond in iTunes using Cmd+I and updating all 3 songs to the same artist name at once (even though they already had Neil Diamond set as the artist), but that didn't change anything.
    Can anyone explaing this? It's a video iPod with s/w 1.1 and iTunes 6.0.2 (23) on OS X 10.4.4.

    I was having a similar problem. I have two Ray Charles Albums in iTunes and Ray Charles is not listed as an Artist in my iPod. I turned off Compilations in the settings menu and all the artists including Ray appeared. I have no idea why but it worked.

  • Can't change Mac's name...

    A few month ago I set up a new Mac with Leopard. Now I changed its name in the Preferences. The machine has the new name, but when I start Terminal the "old" name still exists...
    What can I do to set the Mac's name in the Terminal too?

    If you change the name using System Preferences->Sharing->Computer Name then it should show up in the Terminal. I have no idea why it isn't working (it is here), but I will suggest that you post Unix and Terminal issues to the Unix forum under OS X Technologies.

  • When sending e-mails, how can I show only the name and not include the e-mail address?

    When sending e-mails, how can I show only the name of the recipient and not include their full e-mail address?

    Hi beverlyfromnull,
    Have you added the recipients to your address book?

  • Why can't I get my emails. Tells me that my password and or user name is not correct

    Why can't I retrieve my emails.  Won't accept my password and or user name?

    Try Settings > General > Reset > Reset Network Settings.
    Check if there's  e-mail outage with your e-mail provider.

  • How can I configure Mac Mail to use the correct SMTP server?

    I have successfully set up Mac Mail to use a new e-mail account. Inbound and outbound mail is working just fine. However, I am seeing something odd when I create a new message or reply to an existing message. The outbound account that shows is not that which has been configured for the account. I can manually select the correct outbound account.
    What are my troubleshooting steps?

    One of the first things to check in Mail Preferences, Composing:

  • Error 1719. The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance. Getting this error while installing the package in the windows 2012.

    Getting below mentioned error while installing a package  in the windows 2012 server remotely through psexec command
    Error 1718. Windows Installer Service could not be accessed.
    The same msi is getting installed local in through when we are doing through manually
    Please help on the same

    Hi Rahulan,
    Would you please let us know current situation of this issue? If any update, please feel free to let us know.
    Just addition, please refer to following threads and check if can help you.
    The Windows Installer Service could not be accessed.
    error 1719 windows installer service could not be accessed ....
    Hope this helps.
    Best regards,
    Justin Gu

  • Mac mini + ASUS VW192s - not correct detected !

    Hi.
    ASUS VW192s detect on Mac mini as Standart VGA monitor without wide resolution 1440x900 !. How fix it ?

    Try SwitchRes X to build the missing resolution as a custom resolution.
    http://www.madrau.com
    I recommend the SwitchRes X Control Panel version over the full version for your application.

  • Mac app store updates not correct

    Today I see I have 11 updates for apps on my Macintosh MacBook Pro-13" (mid-2010) running 10.8.4.
    BUT I checked and each of the 11 apps is already at the update that App Store 1.2.2 proposes.  Not sure what is going on--- I've done a restart - same thing appears--- anyone else ever see this?  Is it a problem with 10.8.4 (only installed that 2 days ago).
    Thanks for any comments - I have not elected to "update" any of the 11 apps.  At least not yet - suppose I could try with one and see what happens…
    Best regards,
    Steve Schulte
    Tuesday 18 June 2013

    BUT I checked and each of the 11 apps is already at the update that App Store 1.2.2 proposes.
    Steve ...
    Try deleting the cache associated with the App Store.
    Quit the App Store if it's open.
    Open a Finder window. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following:
    ~/Library/Caches/com.apple.appstore/Cache.db
    Click Go then move the Cache.db file to the Trash.
    Relaunch the App Store. See if the updates are still available.
    If that didn't help, with the App Store open launch Activity Monitor located in HD > Applications > Utilities
    Type storeagent in the search field top right corner of that window. Select that process then click the red Force Quit button.
    Quit and relaunch the App Store.
    message edited by:  cs

  • When i buy music from iPhone artists name changes not on mac just on iPhone why and how can i fix it ??

    recently when i buy my music on iPhone's iTunes store artist name is not correct its changes but not on mac, it changes just on iPhone and its so annoying. Does anyone know how to fix it

    Is this an iPad issue? Not sure where you are "clicking" or how you are accessing. A little more info would help.

Maybe you are looking for

  • Problems getting started with ipad

    I just bought an Ipad and I connected it to my computer and downloaded itunes as it said and my ipad still has that message on it to connect to itunes.  what am I doing wrong???? Thanks

  • Log_policy in OSB - Cannot find policies in WSDL

    Hi, I attached oracle/log_policy to a proxy service in OSB. When I clicked on debug icon to run the test the popup window display this error: oracle.wsm.policymanager.PolicyManagerException: WSM-02133 : Cannot find policies in WSDL. [Possible Cause :

  • Missing item category & material description in sales order screen

    Hi all, We have upgraded SAP from 4.6C to ECC 6.0 version. In the sales order screen (create, change & display mode) the item category & the material description cannot be seen at the item level in the ECC 6.0 version. The same appears in the 4.6C ve

  • Can Address Book sort/Print by address?

    Is this possible in Lion AB or do I need a 3rd party application? Thanks, Tom

  • Fireworks 8 opens in pixels/cm instead of pixels/in in

    I would like to set the preferences in FW 8 to open all my files in pixels/in. Somehow, all files open in pixels/cm. I cannot locate the preference settings so that I can make the change. I do not want to continue to use the dropdown menu to manually