Can't Publish movies of any size!

When I try to publish a movie from iMovie to iWeb it says I have a publishing error. It may occur at anytime during the uploading process.
I have turned off Disk Syncing, I have turned off all Screen Savers and such.
I was able to post video before I upgraded to 1.01. Now I am at a loss.
Any thoughts?
Andy

Iweb and iMovie are memory hogs, any chance you're using other programs while you're waiting for iMovie to publish over to iWeb. The only times I've had publishing errors are when I was doing too many other things at the same time, when my screen saver and energy saver were set to come on, and when I had half a gig of memory. After I upgraded memory and fixed those other settings it cleaned up.
hope this helps.
Jim

Similar Messages

  • Can't Publish Due to File Size

    I'm using Captivate 4. I need to create a video demonstration using my iPad. I'm currently utilizing a screen sharing app to mirror my iPad screen on my laptop. Using this, I created a 6 minute demonstration with audio and text boxes. The file was broken into 21 slides and is huge! About 320,000 KB. What can I do to size this recroding down so that I can publish it? I've tried recording using the full motion option at 16 bit and lower resolution. Is there anything else I should be doing? I need to create about 8 videos all ranging from 5-13 minutes in length.

    My initial large recording was a total of 21 slides at 364,145.6KB with a resolution of 894 x 671. I'm using a PC with Microsoft Windows XP. The laptop has 1.18 GHz and 1.96 GB of RAM. The initial error messsage reads:
    "Your computer does not have sufficient memory resources to perform this operation. Do the following:
    - Check one or more options in the Extrenalize Resources list, and re-publish
    - Close otther applications open on your computer. You might have to close and reopen Adobe Captiavate."
    I had no other applications open at the time. The initial recording was recorded at 32 bit. So I figured perhaps changing the Full Motion Recording settings to 16 bit with a smaller SWF size would help. Any other suggestions?

  • Can't publish movie error code = -108

    I have built a slide show that took me about 20 hours with ken burns effects and transitions between each photo. it is 1hr 23 min long and I have over 300 gb on my hard drive spare. I have 2gb of memory. No matter what I do it won't publish and I get this message after the 119 minutes it takes to go through it all.
    Any advice please

    This might help
    http://discussions.apple.com/thread.jspa?threadID=1456274
    A bit of googling suggests it might be a memory problem. Rebooting clears memory, so may help

  • New computer-I can't do move/delete any info on my iphone

    My old computer crashed and I lost everything. I have a new computer, installed itunes and authorized the new computer but after I plugged in my iphone, I can't move, delete or play anything on my iphone through my computer. I wanted to delete some podcasts I downloaded on my old computer but I can't.

    To delete, tap "Edit" (tap to enlarge image)

  • Can't publish movie; get an error code

    I get an error message in imovie that says, "unable to publish project error code= -2009. What does this mean?

    See this Discussion...
    https://discussions.apple.com/message/24761363#24761363

  • Can i publish to .mac if i am behind a proxy?

    Hey,
    I just arrived on a new campus and i can't get passed the login phase to .mac and so i can't publish to .mac. any suggestions?

    Very unlikely that you will get past that proxy server.
    If financial constraints will allow, get a Verizon air card for your PowerBook. I've used one for years and I don't think I've ever been disappointed with it. The one I use is almost as fast as my land line--I've put up entire sites with it before.
    I use the KPC650. You will be glad you made the investment, as you can then use your PowerBook for practically anything.
    -Mark

  • I am using a Mac Mini. I want to change the file size  in iMovie to MPEG so I can burn the move  to  a disc. There is no "save As" that I can find . What do i do?

    I am using a mac mini. I want to change the file size in iMovie to MPEG so I can burn the movie to a disc. There is no "Save As" that I can find. What do I do?

    Stanley Fayer wrote:
    ... to MPEG so I can burn the movie to a disc. ...
    to create standard-conform DVDs = playable on any DVDplayer, there's much more to do than just converting to mpeg(2)...-
    you need a DVD-authoring app, as iDVD, Burn, Toast ........... drag any iMovie export into it, 'burn'.

  • How can I publish my flash movie in one swf file in V.2

    Hi
    When I publish my movie to flash format , skin swf file is
    segregated from main movie swf file . How can I publish my movie
    only in one swf file ? I want to merge skin and main movie files
    together in one swf file .

    Hi Corona,
    The screen size is whatever you captured or specified during
    the recording or new movie setup process. This will cause the
    playback control to be placed "on top of" some portion of the
    captured background, but there are two ways around that problem.
    1) When you set the red recording area before recording, drag
    the bottom of the recording area downward about 35 pixels below the
    application window (assuming you are capturing an area that
    includes a "bottom" or even an application window - grin). For this
    to work, it is best if you do your recording against a
    solid-one-colored desktop background, so the "extra" area at the
    bottom doesn't include desktop images that you don't want in the
    capture (even though that area will not be visible in the end ...)
    OR...
    2) Use the Project > Resize Project dialog to increase the
    palette size on the bottom, taking care to leave the original movie
    the same size. This will effectively do the same thing as
    Suggestion #1, create a "blank" area at the bottom of the movie on
    which there is room to mount the playback control bar.
    Best of luck, Corona, and omid02. Hope this helps, in
    conjunction with the advice that Rick has already offered.
    .

  • Can you change flash player window size for a published Captivate course?

    I am working on publishing a course with a FMR and, during testing, a lot of scrolling was required so I wanted to resize the window.  Is this possible and, if so, how do I do it? Similar to Flash where you can publish to dimension %???

    you can adjust the movie size in the html, with varying levels of success based on how much you scale.
    edit the swf associated .htm file with a text editor and look for this line:  var so = new SWFObject("project_name.swf", "Captivate", "641", "516", "10", "#CCCCCC");  In this case the 641 and 516 are the pixel dimensions.  you can also change it to a %
    I've never done it with FMR so I won't attest to how well it'll work.

  • When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?

    When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?

    Let's try the following user tip with that one:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • How can I watch movies in germany with native tone, english? Any one knows how to switch the language when renting a movie?

    How can I watch movies in germany with native tone, english? Any one knows how to switch the language when renting a movie?

    I wonder the Format Tables macros on my site could be adapted?
    http://www.grainge.org/pages/authoring/word/word_macros.htm
    If not, I have used Macro Express to format tables in Rh. No reason it could not be used in Word.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • How do I get home video clips from iMovie Mac to iMovie iPad?  Surely there is some degree of cross-compatibility?  I have a load of clips in iMovie on my MBP that I wanna download to my iPad2 so that I can edit movies on the move.  Any ideas?

    How do I get home video clips from iMovie Mac to iMovie iPad?  Surely there is some degree of cross-compatibility?  I have a load of clips in iMovie on my MBP that I wanna download to my iPad2 so that I can edit movies on the move.  Any ideas?  (The clips are in a .mov format, they have been imported / converted into this format in iMovie, original files were from a JVC camcorder in some other strange format.)

    I copied the iTunes file from the external drive and it's in both places.  I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file.  There must be something else that's missing.  My iTunes library looks the same on the new computer as it does when I open it on the external drive.  If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
    My back-up drive is a mess.  I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={  Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period.  I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive.  Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me).  As my Jewish friends would say, "Oy Vey!" 

  • I can't publish to iWeb, it doesn't seem to be able to login to my icloud account. any ideas?

    I've been trying to publish a site on iweb. It seems that iweb is unable to sign in to my icloud account. I push the publish to mobile me tab, push the sign into your account tab,( already a member). I get the barbers pole for 30 seconds or so, and then, nothing happens.  Any ideas anyone?

    MobileMe closed in July last year.
    iCloud does not offer webhosting.
    You have to find a webhost.
    It's been discussed for the past 2 years in this forum, the MMe forum and all over the planet.
    Browse this forum.
    In short :
    Find a webhoster.
    And since you use iWeb 08, publish to a folder and use an FTP app to put the files on the server.
    Oh, and look to the right. I see these topics :
    More Like This
    I'd like to publish an iWeb site within iCloud account.  How do we do this please?
    publish web site to mobile me icloud
    cant publish to mobileme
    MY Iweb Wont publish to my .mac account
    Can' t publish my iWeb

  • How can I check and change the size of photo or doc in iPhone or any other app

    How can I check and change the size of photo or doc in iPhone or any other app

    You would need software form a third party to have this option.  The free software that comes with the 8600 doesn't have an option for that. Vuescan is the only software I could find that says it works with your pritner and has a descreen option.  You have to purchase it, but it will give you more advanced options than the software that came with the printer.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • HT2736 is there any way i can gift a movie or music to an itunes account overseas

    Is there any way I can gift a movie or music to an Apple account that is based overseas?

    No. You can only purchase and redeem a gift in its country of origin.

Maybe you are looking for