Can't publish or export project-error code -108.

I created a project with videos, photos, music etc. The lenght might be a bit long (1h.17) but I did not find any information about a specific limit...When I tried to publish in 1080 hd or any other resolution or even export to quick time after about 30 min it would fail I got the message with error code -108. I have enough space on the hard disk...is there a way to fix it?

I forgot to say that I tried to reboot my mac book Pro with no sucess...

Similar Messages

Unable to Publish Project - Error Code -108

I am trying to publish a project (photos only) that is just a little over 1 hour long. About 75% of the way through I get the -108 error. An error code search indicates "error -108 iMemFullErr or memFullErr: Not enough room in heap zone" .....but I have 14gb RAM and a free 1TB hard drive. Any ideas?

I experienced this error code when I was trying to export a movie using the QuickTime option and H.264 format.
Tried a slew of different video settings without success (meaning after a few minutes of trying to export, iMovie would give me error code -108.
Then, I started suspecting the audio format. So, first I exported the movie without the audio tracks and it completed successfully. Then, I tried exporting with the AAC audio encoder instead of the default Linear PCM option, and it, too, successfully exported the movie, with audio.
So, try a different audio format output for your publication.

Can't publish movie; get an error code

I get an error message in imovie that says, "unable to publish project error code= -2009. What does this mean?

See this Discussion...
https://discussions.apple.com/message/24761363#24761363

I have been exporting lightroom webgaleries to my iweb site without any problem. Suddenly I get the error message "finder can't complete the operation because some data can't be read or written" - error code -36 - thoughts?

i have been exporting lightroom web galleries to my iweb site without any problem. Suddenly I get the error message "finder can't complete the operation because some data can't be read or written" - error code -36 - and the move to the sites folder on my idisk fails..... thoughts?

Try this community: MobileMe on my Mac: MobileMe: Apple Support Communities.
And you can continue to use iWeb for some time to come. The following will explain:
It's now confirmed that iWeb and iDVD have been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. HOWEVER, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
In addition the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on.
HOWEVER, the iLife 11 boxed version that is still currently available at the online Apple Store (Store button at the top of the page) and those copies still on the shelves of retailers will include iWeb and iDVD.

I am having some problems finalizing the project, it says error code -108. I read some tips but i couldn't figure out what AppleMan1958 suggested ,can someone explain this to me ,thank you

I am having some problems finalizing the project, it says error code -108. I read some tips but i couldn't figure out what AppleMan1958 suggested ,can anyone help me with this problem? thank you

Oh ok, well that was what the test said prior to reformatting the hard drive. Now, it doesn't find any trouble no matter how many times I run it. That's what has me so confused, everything seems to check out and yet...I can't do anything, not even install the software!

I can't finalizing my movie project: error 49, what is this?

i can't finalizing my movie project: error 49, what is this?

Hi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occours only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
Yours Bengt W

I can´t publish or export to flash

Hello, I have installed Captivate 6.0.1 in a Mac.
When I finished, I try to publish and a blank square was in the screen in time the publish menu.
I try upgrade Captivate, reinstalled and the problem is continuous.
When I try to export to Flash CS6 or CS5, generate an error message.
Thanks in advanced.

Shekhar
I found and other problem, when you Can publish (a friend have a PC with
the program), I create a SCORM. This file is mow in a Moodle course. When
you open the SCORM all look well, but if you open and URL and return to the
SCORM, the buttons go away.
You need recalled the page in web navigator to see again.
What is *wrong?
*Raúl
2013/3/5 raul cuellar <[email protected]>
Hello again Shekhar
Yes, in this address I found the Captive carpet. Then I changed the name
and reestarted the program.
Now I see this page at started and whe try to publish.
image: Imágenes integradas 1
image: Imágenes integradas 2
>
What I can do?
Thanks in advanced
Raúl Cuéllar
>
2013/3/5 Shekhar_Dhiman <[email protected]>
>> **
>> Re: I can´t publish or export to flash created by Shekhar_Dhiman<http://forums.adobe.com/people/Shekhar_Dhiman>in
>> Adobe Captivate - View the full discussion<http://forums.adobe.com/message/5124277#5124277>

When sharing through the export media option as pro res 422 i get error code 108

when sharing through the export media option as pro res 422 i get error code 108 and message saying could not complete because an error occurred when encoding frame 3297 - error 108!!!
what is this frame...is it a jpeg file i have imported...how do i locate it... its a 40 minute movie and it will share to dvd just wont let me create a quicktime .mov file... any suggestions.

What frame rate is the project? Divide the 3297 by the frame rate to get an approximate location? What are the specs of the media at that location, video and audio?

I renamed a power point a file and now when I try to open it it keeps giving me the error code -108. If I try to open or copy it say: The operation can't be completed because one or more required items can't be found. (Error code -43). What do I do?

I renamed a power point a file and now when I try to open it it keeps giving me the error code -108. If I try to open or copy it say: The operation can’t be completed because one or more required items can’t be found. (Error code -43). What do I do?

Post in Microsoft's Powerpoint (Mac) message boards.

The finder can't complete the operation because some data in "VIDEO_TS.BUP "can't be read or written (error code-36)

the finder can't complete the operation because some data in "VIDEO_TS.BUP "can't be read or written (error code-36)

I faced the same problem and i fixed it by going to applications - utility - disk utility and fixing the errors.

While transferring several files to the G-Raid, the G-Raid device locks up with the following warnings: "The Finder can't complete the operation because some data in (whatever file) can't be read or written (Error code - 36)."

While transferring several files to the G-Raid, the G-Raid device locks up with the following warnings: "The Finder can't complete the operation because some data in (whatever file) can't be read or written (Error code - 36).” NOt sure this is a G-Raid problem, can anyone help?

This is likely a problem with the drive itself. This error indicates unspecified I/O errors with the drive, which can be from a hardware fault, or a formatting issue. If the drive has valuable data on it, then try connecting it to another PC to get the data off, and then try fully partitioning and formatting the drive with Disk Utility. If this corrects the error then you should be able to use the drive again as it was likely a formatting issue, but if the problem continues then it is likely a hardware fault and the best solution is to be safe and replace the drive.

I tried to backup computer contents, but could not because "finder can't complete the operations becaus some data in "....JPG" can't be red or written (error code-36)" What is this?

Question: I tried to backup my computer contents, cut coun't because "finder can't compelte the operation because some data in ........JPG (an iphoto image)
can't be read or written (error code -36) What is this error and how can I correct it?
Thanks,
betteyp

I am backing up on two different drives...one is on the time machine...the one I am having trouble with is a passport that I back up manually. I have not gotten a notice from the backup on the time machine that there is an error.
Before this error occured....the "event" that the photo was in emptied without me doing anything. This has happened before, when the total number of pictures that I have downloaded for the day, the events emptied overnight without me doing anything (????????)
Can you explain more what is happening.....
Thanks

Trying to copy iPhoto Library to external hard drive for backup. Error message: The Finder can't complete the operation because some data in "iPhoto Library" can't be read or written (Error code -36).

Trying to copy iPhoto Library to external hard drive for backup. Error message: The Finder can't complete the operation because some data in "iPhoto Library" can't be read or written (Error code -36).

That code is
-36
ioErr
I/O error (bummers)
Make sure the EHD is formatted OS X Extended (journaled) and run Disk Utilty on the EHD and repair the disk. If that fails to help I'd try the following:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button,
navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
In the next window name the new library and select the external HD as the location of the newly rebild library.
Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.
OT

Can anyone tell me how to correct error code 108 in power point

Can anyone tell me how to correct error code 108 in power point?
It appears that a PP presentation has completely disappeared, giving only the error that the file has been deleted or moved (which it hadn't). Is there a way to retrieve it.
It is visible in 'All my Files' but when clicked says that PP cannot be opened
Thanks for your help.

You might try looking/posting here.
Microsoft Support – Office for Mac
Microsoft Support – Office for Mac (2)

Been having trouble with printer drivers, so I uninstalled Photoshop CC and now I can't reinstall. Getting an error code 50

I can't get cc to install. error code 50

Can you open the CC Desktop Application Manager. Click on the cog icon top right corner. Then on Account and see what version you are running?
If less than 1.6.0.393 then you need to update the Desktop Application Manager. I think that _might_ fix your error 50.

Can't publish or export project-error code -108.

Similar Messages

Maybe you are looking for