Can't publish with Presenter7, only have data folder

I was publishing a .PPT file with Presenter7, but after publishing, only "data" folder could be found in publish folder, no other files, like .htm, XML, swf...
How could I solve this problem?
Thanks!
Judy

Hello Judy,
Have you tested Presenter 7.0.7 version ?
7.0.7 is the latest version for Presenter 7, it includes solution of some known issues.
You can download Presenter 7.0.7 from this page :
http://www.adobe.com/support/downloads/product.jsp?product=153&platform=Windows
Uninstall Presenter 7 and then install Presenter 7.0.7
Thanks
Vikram

Similar Messages

My Iphone is deactivate, I have photos with out back up, How can I open with out loosing my data.

My Iphone is deactivate, I have photos with out back up, How can I open with out loosing my data.

Aussienana wrote:
OK, so I went and explored what this site said about Mackeeper. But before I delete it can you tell me:
If we don't need anti virus program and if the one that came with the machine is supposed to do the job then what does that say about the viruses that Mackeeper says it found? Were they not there and the program made them up? Or were they there and Apple didn't deal with them?
Thanks for all feedback.
They were not there and MacKeeper made them up. Delete it completely. I have seen it cripple people's Macs.
Uninstall MacKeeper
Pete

I just purchased the apple tv, i have an older tv that does not have an HDMI input. is there a converter i can get because the itv only have an HDMI output ? help.

i just purchased the apple tv, i have an older tv that does not have an HDMI input. is there a converter i can get because the itv only have an HDMI output ? help.

Welcome to the Apple Community.
There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
HDCP
HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
Resolution and aspect ratio
I'm not aware of any converters that will scale the output from the Apple TV, any TV or projector which is used will need to be widescreen and support resolutions of 720p.

How can I publish the alterations I have made to my iWeb pages when the ' Publish Site' button and 'Publish Site Changes' on the file dropdown are grey?

How can I publish the alterations I have made to my iWeb pages when the ' Publish Site' button and 'Publish Site Changes' on the file dropdown are grey?

this is a perfect question for the users in the iWeb forum. https://discussions.apple.com/community/ilife/iweb. Good luck.

Does Ipad 3, with WiFi only, have an internal GPS?

Does Ipad 3, with WiFi only, have an internal GPS?

iOS 5: Understanding Location Services
http://support.apple.com/kb/ht4995
 Cheers, Tom

I can't publish my site to a local folder.

I can't publish my site to a local folder. It says "Publish Error. An unknown error occurred". There is also no Domain.site2 in iWeb folder in Application Support. I was wondering if anybody may be able to help please? I can open the site from the local folder but working on changes will not work and some catagories don't show properly. I'm using Snow Leopard, iWeb 3.0.4. OS X 10.6.8

Are you looking in the correct library. You want the Home () /Library/Application Support folder.
Or you can download and run the shareware Find Any File to search for "domain.sites2". FAF can search areas that Spotlight can't and will find the domain file.
OT

I used to have iWeb and now my domain has a password even after I ended my account. I can't publish with sandvox

I have had iweb for years and since the publishing with mobilme is going away i have since switch to sandvox and hosting with godaddy. I have set up everything and it said it published but when I go to the site it makes me put in my apple id. How do I get that to go away?

I agree, you need to adjust your DNS. I have an important question for you, though. Do you see your site if you visit the domain without the www subdomain? In other words, do you see the site if you go to "YourDomain.com" and only get the MobileMe login box if you visit "www.YourDomain.com"? If that's the case, you only need to make one change. If it doesn't work either way, you'll need to make two changes.
You said that you host with Go Daddy, but you didn't say whether or not the domain was also registered at Go Daddy. I'm assuming it is and that it's registered in the same Go Daddy account that you used to purchase the hosting account...
Here's a guide that explains how to access the DNS Manager in Go Daddy and make changes: http://x.co/kTW3
That guide can look complicated because there's a lot of stuff that *can* be done in the DNS Manager. In your case, you probably just need to access it and choose the "Restore Detaults" option for your CNAMEs. To be sure, though, it's always best to contact Go Daddy Support so they can go over the exact details of your account with you and make sure you're not making any unwanted changes. They're available 24/7, so you can call whenever it's convenient.
If the site's not coming up without the "www" subdomain, you should also change the nameserver setting. To do that, read this guide: http://x.co/kTXR
You'll want to follow the steps for "Setting Nameservers for a Domain Name Registered with Us" and choose the "I have a hosting account with these domains". It'll take a little time after you make this change, but our system should automatically set the domain to point to the hosting account properly.
I hope this helps. As I mentioned before, don't hesitate to contact Go Daddy Support for assistance. They're better equipped to instruct you since they can look at your account settings and walk you through making changes. Phone and email contact info is here: http://x.co/kTYi
Good luck to you!
Alon

I have Sony camera DSC-HX400V which does not have raw program. Pls explain what can I do with jpeg only

I have Sony camera DSC-HX400V which does not have raw program. Pls explain what can I do with lightroom 5 with jpeg only
Arieh Gertler
[email protected]

You can do just about anything with a JPEG image that you can with a raw image. The advantage of working with raw is that it is possible to work with more extremes in exposure. More highlights and shadows can be recovered in a raw image, but there is a lot that can be done with JPEG images as well. All of the library functions and keywording and all the other features of Lightroom can be used on JPEG images just as easily as they can be used on raw images.
Having said all that, you might be more comfortable using Photoshop Elements. Both programs have trial versions that you can use for 30 days to decide which one or whether both will work for you. It would probably be to your advantage to try them out and decide for yourself.

Export tables that only have data

how can i export all the tables that have data for a certain schema and exclude the tables that are empty?
version 10g

Well, I guess you can query user_tables and see where num_rows is zero for the tables to determine the tables. But, remember, you have to gather statistics in order to do this. But, then, still it may not be hundred percent right.

How can i connect with ipad 2 to data projector? ( i have VGA cable) what is the setup? When i search from data projector it cant match with my ipad 2

Hi,
İ have ipad 2, data projector and VGA connection cable. But when i connect my ipad 2 to data projector, and when i press source bottom to search device, i cnat connect, it search about hour. İs there any configuration or what, what am i missing.
Thanks for your support.
Yasar Maasoglu

http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
http://learninginhand.com/blog/5-ways-to-show-your-ipad-on-a-projector-screen.ht ml

LabVIEW created .DAT file with saving only new data on existing files

I can successfully create and save a .DAT file using LabView and Diadem. The save command I am using (in Labview) only overwrites existing files, I would like it to save only the new data from the last save. Overall I would like to save the data every 1hr and since my test will last for many hours, the further along in the test the longer it would take to save the full file. I know Diadem has the capability to save in such a manner, so I have thought about after I write to Diadem have a small Diadem application save periodically, but I haven't found a way to save the .DAT file, with out any signals coming into the save function. I have attached the example .DAT file creater and saver I am using to figure it out. thanks for your help!

Howdy New Guy -
I am not sure if you are looking to append to a file, or if you would
like to overwrite a file. In either case, you can take a look at
the "Append To File.vi" example for DIAdem.
Either way, you may be experiencing problems because you are only using
the "DIAdem Simple File Write.vi" (found on the DIAdem >> DAT
Files palette). Instead, you can use the "DIAdem File Write.vi"
(located on teh DIAdem >> DAT Files >> DAT Files Advanced
palette). This VI can be set to overwrite or append to file.
I hope this helps in your development!
Andrew W. || Applications Engineer

Can iWeb publish with JPEGS rather than PNG?

Is there any way to make iWeb use only jpegs rather than PNG files when publishing? Also, I think a picture quality slider would be helpfull for compression and site size management... thanks

You can minimize the chances of iWeb converting your jpgs into PNGs if you pay attention to the following things...
1. Scale your jpgs to the resolution they are to be used...don't let iWeb do the scaling if possible (like dropping a photo in and then adjusting the size handles). Target your resolution and then drop the photo in and select "Use Original Size" in the Inspector Shape tab.
2. Do not apply effects to your jpgs....if you do, iWeb will automatically convert to PNG and the file size will be even bigger! These effects include drop shadows, rotation, frames, opacity changes, etc.
3. Be aware that in some templates, dropping a photo into iWeb automatically applies frames, drop shadows, and/or reflections. You can deselect these enhancements in the Inspector panel after dropping the photos in. If you don't, iWeb will convert to PNG.
4. Do not use the "Use image as background" option. Better to drag an exactly sized jpg photo into iWeb and push it to the very back layer than to use this option.
You are right, iWeb or at least iPhoto needs to have some sort of user control over jpg compression. I use another app for this purpose called "Downsize". On the plus side, it also lets me apply shadows and frames to photos and saves the finished image with effects and all as a jpg.

Captivate 1.0 - can't publish with audio on Vista

I imported several audio files in my Captivate 1.0 movies
running on Windows Vista. The problem is that there is no sound
after the movie is published to SWF. I can hear audio in editing
mode, when I press space to play the current slide (red playhad
moves). BTW, only WAV (PCM) can be imported, not mp3.
Any ideas how to get audio exported to swf with the rest of
the movie?

quote:
Originally posted by:
jojolina
Hi there Zozo77
As far as I can recall, the audio gets exported at the same
time as the rest of the project and you end up with 2 files (html
and swf). If you are using the html file to launch your outputs and
not getting any sound, then I can only assume that it is because of
Vista. Only Captivate 3 is vista compatable and you say you are
using Captivate 1. Further, Captivate 1 can import mp3 format
files, select "Audio" from the menu, then "Import".
I know this does not help you, but maybe someone else has a
further idea on teh sound problem.
Cheers
Anderw
I know how to import mp3 but it's not working on Vista with
Captivate 1.0. It works on WinXP though.
I know I end up with two files: SWF and html. I tried to open
swf in stand alone flash player. No sound.
Unfortunately, I'm afraid my team will have to do the
publishing on WinXP machines. We have enough Captivate 1.0 licences
but Captivate 3.0 upgrade is very expensive.

I can not publish with iWeb.

I seem to be in a circle of prompts. "sign in to mobile." I do and "your account has been upgraded to iCloud." How do I now publish my website?

Are you really on 10.5.2 as your signature suggests? - because this does not work with iCloud in any event.
Assuming you are actually on 10.7.2 and have migrated to iCloud, you need to go to System Preferences>MobileMe and sign in - the migration process tends to sign people out. Then iWeb should work OK, publishing to MobileMe just as before.
iCloud does not provide any website hosting or general files storage in the manner of iDisk; as MobileMe will be terminated next June your website will disappear then unless you find another host for it. You can publish to another host using iWeb provided it is up to date. More details here:
http://rfwilmut.net/migrate2

Can I work with Rdb as a data source?

We have legacy data in an Rdb database on a VMS machine. Is there some way I can configure Portal so I can work with the objects in that database and use the wizards? I have a link set up, and I can successfully connect to the database using SQL Plus, but I can't access the objects in the database from within Portal using the object navigator. We've only started using Portal recently so maybe I've missed something obvious?...

Hi,
I actually used 11.1.1.1 in an implementation. The CubeQuery for Essbase is a great improvement over the standard OLAPQuery. You can now do almost everything that you can accomplish with Web Analysis (member selection, subset) in terms of Essbase query functionality. It's worth a try. However, I remember having an annoying bug when used with Dashboard Architect although I can't seem to remember what it was.
Regards,
Gerd

Can't publish with Presenter7, only have data folder

Similar Messages

Maybe you are looking for