Can't put my site on hosting server

Hi,
When I try to put my site up online, there is a pop-up window for two seconds before it goes away. I can't put any pages, files, photos or anything up. What is happening and how do I fix it?

Hi
Check your remote site definition in the DW site definition and the troubleshooting section of this tutorial - http://www.adobe.com/devnet/dreamweaver/articles/first_cs4_website_pt6.html.
Also ensure that DW is not being blocked by your firewall.
PZ

Similar Messages

Safari can't open a site-connection to server error-help,

Hi, having problems opening one page. "Read", one page only. All other sites open fine. When I try to connect to this site I get the error:
Safari can’t open the page “http://offres.neuf.fr/offres/internet/Nos-offres-ADSL.html?cmp=OF100” because it could not connect to the server “offres.neuf.fr”.
I used to be able to open this page fine. I tried it on another computer, no problem, and a response in another very long link indicated "he" could open it fine. Anybody have an idea why this page is being so stubborn and giving me this error? Thanks. Hope to hear a fix.
M

What will happen if I empty the cache and clear the history in Safari?
Will I lose all the info stored when I visit sites, and have to retype?
NO, You will not lose your Autofill preferences ( found in Safari's Preferences/Auto fill tab ) they are not affected if you empty cache and clear history.
"Reset Safari" would affect the user name & passwords stored in Autofill.
~•~
Matthew, your welcome; ), is this the only site you can not access?
Please try the site In another account. If you do not have another account please create a test account:
Go to System Preferences/ Accounts/Login Options use the [+] to make one. you can later remove it with the [-] if you choose to.
Login into that account can you access the site there?
This helps to narrow down the problem, by showing us if it is a system wide issue or user name specific.
Eme: )

Can't put a site back on to, Options, security, saved passwords.

I'm using; Firefox version 3.6.22 with Windows 7 on a Dell Studio 17 inch laptop.
On the; Tools, Options, security section, saved passwords.
I did have my login for www.walmart.com , in it. It worked fine & loaded &/or signed me in every time. Till today. The walmart.com site is gone from the saved list and even though the "Remember Passwords for sites" is working - it asked if I wanted to save the login info when I just registered to ask for help with this - it did not ask, "do I want to save the sign in, or login, password for this site" when I just had signed into the walmart.com because it didn't do it automatically like usual. Also the walmart.com isn't on the exception list either. But when I login on the site it doesn't ask if I want to save it, and I cant find a way to add it back to the list of sites.
The troubleshooting help for adding a site to the saved passwords list that had been blocked, or "do not ask again" checked, said to check the exceptions list and delete it from there. But the one I want back on the saved list is NOT on the exceptions list.
How can I get this reset, fixed, or what ever, without loosing ALL of my other saved sites UN & PW?
I used to have all my User Names and Pass Words saved with the NORTON security program. But now I cant access them because my NORTON expired. After loosing all of those I don't need to loose these too.

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
*You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
*To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting Firefox will: Use custom settings for history
* Deselect: [ ] "Permanent Private Browsing mode"

How can I publish my site on host

This is my first site , so I do not know how to publish my
site on the host. I buy host from IX WEB HOSTING.
I use Dreamweaver 8.0 to design my site.
Thanks for any help.

Please a) update your DW 8.0 to 8.0.2 using the updater at
the Adobe
downloads site, and then b) read DW's F1 help about how to
define your
Remote site, connect to it, and upload your files.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"canhchimnc" <[email protected]> wrote in
message
news:en45dt$kvm$[email protected]..
> This is my first site , so I do not know how to publish
my site on the
> host. I buy host from IX WEB HOSTING.
> I use Dreamweaver 8.0 to design my site.
> Thanks for any help.
>

Suddenly can't put files to remote server

Hi there,
In Dreamweaver 5.5 (OS 10.7) I suddenly can't put files to the remote server. I've been using Dreamweaver for just over a year and this has never been a problem before. My site is: www.peawitpress.co.uk
The updated files go through the normal process of being "put" to the server (I don't get an error message or anything when synchronising), but when I check the live site the changes don't appear. I've tried refreshing the page and emptying the cache, but nothing seems to work. I've verified that I can connect to my web server and have verified the root directory and they are both fine.
The only thing that is unusual when synchronising is that (for the past day) the six files in the attached screenshot always want to synchronise (even though they haven't been updated). I deleted them from the site and added them again in case they somehow became corrupted, but they still randomly want to synchronise.
Any suggestions? It seems like there would be an easy solution for this, but I can't figure it out. Any help would be hugely appreciated!
Thanks and best wishes,
Alexandria

This has happened to me a few times in CS6. I think it's a memory thing.
Close DW. Reboot your computer. Open DW.
If you still cannot FTP to server, go to Site > Advanced > Recreate Site Cache.
Nancy O.

FTP no longer connects to hosting server after the latest update.

I was able to successfully connect to the web hosting server yesterday before the update. Today, after the update I can no longer connect to the hosting server via FTP. Any suggestions?
Thanks

Check your site definition settings in Site > Manage Sites.
Nancy O.

Saving a website on the hard drive so that you can put it on another host

I just made a website and want to save it to my hard drive just in case everything crashes or there is a dispute with the host and then I will have the website ready to put on another host. For example, if the host decides they don't like my content they might just pull it off the web. I have heard it happen to people and they had to find another host. I don't think it will happen to me but you never know and I just want to have a copy so that if there is any dispute, I can have the website saved and ready to put up on another hosting account.
Can I just save it from the web using "Save file"? Will that save it in a form that's good enough for putting on another host? I can hire a designer to put it on the host if it takes a few extra programming steps, so long as I have the files saved .....
Or do I have to do something complicated like special save programs like
http://www.sitesucker.us/mac.html ?
I use Scrapbook add-on on Firefox to save the webpages I like just in case the site gets pulled down in the future. Is that the kind of thing I need? If that is all I need, can I use Scrapbook to save my website?
Will it save all the information to restore the website on another host exactly as it appears? My website has been coded with HTML/CSS. I don't think there is much PHP.
I am not sure about databases. My website is simply selling a service so I don't keep a database I think or just a minimal one. The customer fills out a form and the information goes to my email address. And the information on my website doesn't change. It isn't a blog that I am adding information to constantly. It just has links for navigating to different pages on the same website. It doesn't have links that point to other websites. There are no fancy files like movies etc.
I just want something to save my website so that I or an experienced web person can easily put it back up on another host.
I use Snow Leopard 6.0 by the way. I haven't upgraded to Snow Leopard 6.3 because there were a lot of problems when I did that in the past. So I went back to Snow Leopard 6.0. (It's been good so far so I think I will stay with it.)

I didn't make it. I gave the psd design to a web designer and gave him instructions to make it using CSS as I heard CSS web pages load faster. He said he wouldn't use database programming languages like php or MySquareL or whatever they're called because he said I didn't need them and he would charge me a lot more for that, so I said just make it with CSS/HTML. I think he's a PC guy, not a mac guy. He's a professional designer and he made my website from scratch from my designs, not with a website builder.
He hasn't put it on the host yet though he's just about to. I did a search about backing up your website and one website said that some hosts allow you to backup the website using cPanel or something like that. I don't know whether my host has that or not. My host account is very cheap like $16 a year so I don't think there are any special features to the hosting account.

How can I Deny permissions to logon to Remote Desktop Session Host server in powershell script?

I am need of some assistance please. I am a system admin and I am trying to create a script that will assist with the tedious tasks I have to do with disabling a user that no longer works for the company.
I have created a script so far that will reset the users passwords and remove them from all groups (minus domain users).
I am trying to make it where it will deny permissions to logon to Remote Desktop Session Host server as well as give full mailbox permission to the manager in Exchange Server 2010.
I know with Exchange 2010, I will need to add the Powershell snapin. Is there a way for this to be added into the script? I am thinking to add the code:
add-pssnapin Microsoft.exchange.management.powershell.e2010
Is there another way to do this? Any help or recommendations would be much appreciated.
$ou = Get-ADUser -SearchBase "<*OU info here*>" -Filter * |
Set-ADAccountPassword -Reset -NewPassword (ConvertTo-SecureString -AsPlainText "<*Password here*>" -Force)
foreach ($user in $ou) {
$UserDN = $user.DistinguishedName
Get-ADGroup -LDAPFilter "(member=$UserDN)" | foreach-object {
if ($_.name -ne "Domain Users") {remove-adgroupmember -identity $_.name -member $UserDN -Confirm:$False} }

Why not just disable the account?Why are you searching an OU foro users when you just want to terminate one user?
You can remotely connect an exchange session and manipulate the mailbox permissions. You do not load a snap-in except on the Exchange server.
$Session=New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri http://<FQDN of Exchange 2013 Client Access server>/PowerShell/
Import-PSSession $Session
# exchange commands here
\_(ツ)_/
We have a checklist we have to go through with the tasks listed. We have to keep to the account enabled until HR changes
the status which is usually 30-90 days depending. Managers sometimes need to access the accounts to retrieve information, etc. We put the users in an OU; once we are given permission from the manager we move forward in the removal.

Using sjsws to host many small servlet/jsp sites on one server

Hello. I visited the web page at http://www.sun.com/software/products/web_srvr/features.xml, which mentions that sjsws supports mass hosting of thousands of domains. Anyone knows more information about this feature? I want to find out whether sjsws is a good choice for hosting many small servlet/jsp sites on one server.
Some time ago, I tried using apache+tomcat to host many small servlet/jsp sites on one server. But the result was not satisfactory. If a private tomcat/jvm is used for each site, too many resources are consumed and as a result, not many sites can be hosted on one server. If a shared tomcat/jvm is used for all sites, the resources consumed are reduced, but it becomes very difficult to isolate the sites. Is it possible to overcome such problems with sjsws?
Thx.

Of course you dont have to use multiple VMs to host multiple applications.
You can either choose to have multiple Virtual Servers, all in one instance of the web server, serving multiple applications. In this case only one java VM is used.
Or you can go in the route posted in the link above, in which there is only one "physical" virtual server, with many dynamic virtual servers.
Whether you chose to have many multiple web applications, or do the server division in a similar way to what is described in the blog, it is up to you.
Many different web applications will give you more fine level control on the application separation, but it will probably also mean greater resource consumption associated to the web application managing.
Less web applications, but with dynamic separation, in a similar way to what is described in the blog, will give a lesser control on the applications, but will save you a good number of resources.
SJS Web Server is known to work in massive web sites, with very high number of JSPs and Servlets. There is some real life examples of this massive hosting. Maybe others can provide some numbers here :P

VPN Client can't reach router or hosts, but can reach other connected sites.

We have a VPN client configuration on a 2901 router. The client passes authentication and connects fine. When connected, cannot reach the 2901 or any devices directly behind it, BUT can reach routers and hosts that are connected to the same 2901 through site to site connections.
Few notes:
I have added some lines excluding NAT in a few different ways, but does not resolve.
I have switched the RAP rool from 10.96.20.x to 172.21.20.x and can then connect to the local host. Appears to be a routing issue to the 10.x network, but I can't seem to find the solution.
Any help would be greatly appreciated. Here is the config:
boot-start-marker
boot system flash
boot system flash:c2900-universalk9-mz.SPA.153-2.T.bin
no ip domain lookup
ip inspect log drop-pkt
ip inspect name FIREWALL tcp
ip inspect name FIREWALL udp
ip inspect name FIREWALL ftp
ip inspect name FIREWALL fragment maximum 256 timeout 1
ip inspect name FIREWALL ntp
ip inspect name FIREWALL pptp
ip inspect name FIREWALL dns
ip inspect name FIREWALL l2tp
ip inspect name FIREWALL pop3
ip inspect name FIREWALL icmp router-traffic
no ipv6 cef
crypto isakmp policy 1
encr aes
authentication pre-share
group 2
crypto isakmp policy 5
encr 3des
authentication pre-share
group 2
crypto isakmp policy 10
encr 3des
hash md5
authentication pre-share
group 2
crypto isakmp policy 95
authentication pre-share
group 2
crypto isakmp policy 99
hash md5
authentication pre-share
group 2
crypto isakmp policy 110
hash md5
authentication pre-share
crypto isakmp client configuration group VPN-RAS
key *********
dns 10.96.17.2 10.1.200.50
wins 10.96.17.2 10.1.200.50
domain mine.com
pool RAPOOL
acl SPLIT
save-password
split-dns mind.com
netmask 255.255.255.0
crypto isakmp profile USERS
   match identity group VPN-RAS
   client authentication list DOMAIN
   isakmp authorization list VPN-RAS
   client configuration address respond
   keepalive 300 retry 5
crypto ipsec transform-set AES128 esp-aes esp-sha-hmac
mode tunnel
crypto ipsec transform-set 3DES esp-3des esp-sha-hmac
mode tunnel
crypto ipsec transform-set DES esp-des esp-md5-hmac
mode tunnel
crypto ipsec transform-set 3DES-MD5 esp-3des esp-md5-hmac
mode tunnel
crypto ipsec transform-set DES-SHA esp-des esp-sha-hmac
mode tunnel
crypto ipsec transform-set myset esp-3des esp-sha-hmac
mode tunnel
crypto dynamic-map dynmap 1
set transform-set AES128
set isakmp-profile USERS
crypto map COMPANY_VPN 10 ipsec-isakmp
set peer *******
set transform-set 3DES-MD5
match address PA-VPN
qos pre-classify
crypto map COMPANY_VPN 50 ipsec-isakmp
set peer ******
set transform-set AES128
match address VPN
qos pre-classify
crypto map COMPANY_VPN 999 ipsec-isakmp dynamic dynmap
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
ip address 37.222.111.224 255.255.255.248
ip access-group INBOUND in
no ip redirects
no ip unreachables
no ip proxy-arp
ip verify unicast reverse-path
ip flow ingress
ip flow egress
ip nat outside
ip inspect FIREWALL out
ip virtual-reassembly in
duplex auto
speed auto
no cdp enable
no mop enabled
crypto map COMPANY_VPN
interface GigabitEthernet0/1
no ip address
ip flow ingress
duplex auto
speed auto
interface GigabitEthernet0/1.17
description LAN
encapsulation dot1Q 17
ip address 10.96.17.253 255.255.255.0
ip access-group OUTBOUND in
ip flow ingress
ip flow egress
ip nat inside
ip virtual-reassembly in
standby 0 ip 10.96.17.254
standby 0 priority 110
standby 0 preempt
standby 0 track 1 decrement 20
interface GigabitEthernet0/1.27
description VOICE
encapsulation dot1Q 27
ip address 192.168.17.254 255.255.255.0
ip access-group OUTBOUND in
ip helper-address 10.96.17.2
ip flow ingress
ip nat inside
ip virtual-reassembly in
h323-gateway voip bind srcaddr 192.168.17.254
ip local pool RAPOOL 10.96.20.50 10.96.20.150
ip forward-protocol nd
ip nat inside source route-map NAT-POOL interface GigabitEthernet0/0 overload
ip route 0.0.0.0 0.0.0.0 37.222.111.223
ip route 10.96.16.0 255.255.255.0 10.96.17.250
ip route 172.22.1.0 255.255.255.0 10.96.17.250
ip route 172.22.2.0 255.255.255.0 10.96.17.250
ip route 172.22.3.0 255.255.255.0 10.96.17.250
ip route 192.168.16.0 255.255.255.0 10.96.17.250
ip access-list extended DMZ
deny   ip any 10.0.0.0 0.255.255.255
deny   ip any 192.168.0.0 0.0.255.255
permit ip any any
ip access-list extended GUEST
deny   ip any 10.0.0.0 0.255.255.255
deny   ip any 192.168.0.0 0.0.255.255
permit ip any any
ip access-list extended INBOUND
deny   ip 80.25.124.0 0.0.0.255 any
deny   ip 10.0.0.0 0.255.255.255 any
deny   ip 172.16.0.0 0.15.255.255 any
permit udp host 173.239.147.114 any eq isakmp
permit esp host 173.239.147.114 any
deny   ip 192.168.0.0 0.0.255.255 any
permit udp any host 37.222.111.224 eq isakmp
permit udp any host 37.222.111.224 eq non500-isakmp
permit esp any host 37.222.111.224
ip access-list extended NAT
deny   ip 10.96.20.0 0.0.0.255 any
deny   ip any 10.96.20.0 0.0.0.255
permit ip 192.168.0.0 0.0.255.255 any
permit ip 10.0.0.0 0.255.255.255 any
ip access-list extended NONAT
permit ip any 192.168.0.0 0.0.255.255
permit ip any 10.0.0.0 0.255.255.255
ip access-list extended OUTBOUND
deny   udp any host 22.55.77.106 eq isakmp
deny   udp any host 22.55.77.106 eq non500-isakmp
deny   esp any host 22.55.77.106
permit ip any any
ip access-list extended PA-VPN
permit ip 10.0.0.0 0.255.255.255 10.96.18.0 0.0.0.255
permit ip 10.0.0.0 0.255.255.255 192.168.18.0 0.0.0.255
permit ip 192.168.0.0 0.0.255.255 10.96.18.0 0.0.0.255
permit ip 192.168.0.0 0.0.255.255 192.168.18.0 0.0.0.255
ip access-list extended SPLIT
permit ip 10.0.0.0 0.255.255.255 any
permit ip 192.168.0.0 0.0.255.255 any
ip access-list extended VPN
permit ip 10.96.16.0 0.0.0.255 10.0.0.0 0.255.255.255
permit ip 10.96.17.0 0.0.0.255 10.0.0.0 0.255.255.255
permit ip 10.96.18.0 0.0.0.255 10.0.0.0 0.255.255.255
permit ip 10.96.0.0 0.0.255.255 192.168.0.0 0.0.255.255
permit ip 10.96.0.0 0.0.255.255 10.0.0.0 0.255.255.255
permit ip 192.168.16.0 0.0.0.255 192.168.0.0 0.0.255.255
permit ip 192.168.17.0 0.0.0.255 192.168.0.0 0.0.255.255
permit ip 192.168.18.0 0.0.0.255 192.168.0.0 0.0.255.255
permit ip 192.168.17.0 0.0.0.255 10.0.0.0 0.255.255.255
permit ip 192.168.18.0 0.0.0.255 10.0.0.0 0.255.255.255
permit ip 172.22.0.0 0.0.255.255 10.0.0.0 0.255.255.255
permit ip 172.22.0.0 0.0.255.255 192.168.0.0 0.0.255.255
route-map NAT-POOL deny 5
match ip address NONAT
route-map NAT-POOL permit 10
match ip address NAT

We have a VPN client configuration on a 2901 router. The client passes authentication and connects fine. When connected, cannot reach the 2901 or any devices directly behind it, BUT can reach routers and hosts that are connected to the same 2901 through site to site connections.
Few notes:
I have added some lines excluding NAT in a few different ways, but does not resolve.
I have switched the RAP rool from 10.96.20.x to 172.21.20.x and can then connect to the local host. Appears to be a routing issue to the 10.x network, but I can't seem to find the solution.
Any help would be greatly appreciated. Here is the config:
boot-start-marker
boot system flash
boot system flash:c2900-universalk9-mz.SPA.153-2.T.bin
no ip domain lookup
ip inspect log drop-pkt
ip inspect name FIREWALL tcp
ip inspect name FIREWALL udp
ip inspect name FIREWALL ftp
ip inspect name FIREWALL fragment maximum 256 timeout 1
ip inspect name FIREWALL ntp
ip inspect name FIREWALL pptp
ip inspect name FIREWALL dns
ip inspect name FIREWALL l2tp
ip inspect name FIREWALL pop3
ip inspect name FIREWALL icmp router-traffic
no ipv6 cef
crypto isakmp policy 1
encr aes
authentication pre-share
group 2
crypto isakmp policy 5
encr 3des
authentication pre-share
group 2
crypto isakmp policy 10
encr 3des
hash md5
authentication pre-share
group 2
crypto isakmp policy 95
authentication pre-share
group 2
crypto isakmp policy 99
hash md5
authentication pre-share
group 2
crypto isakmp policy 110
hash md5
authentication pre-share
crypto isakmp client configuration group VPN-RAS
key *********
dns 10.96.17.2 10.1.200.50
wins 10.96.17.2 10.1.200.50
domain mine.com
pool RAPOOL
acl SPLIT
save-password
split-dns mind.com
netmask 255.255.255.0
crypto isakmp profile USERS
   match identity group VPN-RAS
   client authentication list DOMAIN
   isakmp authorization list VPN-RAS
   client configuration address respond
   keepalive 300 retry 5
crypto ipsec transform-set AES128 esp-aes esp-sha-hmac
mode tunnel
crypto ipsec transform-set 3DES esp-3des esp-sha-hmac
mode tunnel
crypto ipsec transform-set DES esp-des esp-md5-hmac
mode tunnel
crypto ipsec transform-set 3DES-MD5 esp-3des esp-md5-hmac
mode tunnel
crypto ipsec transform-set DES-SHA esp-des esp-sha-hmac
mode tunnel
crypto ipsec transform-set myset esp-3des esp-sha-hmac
mode tunnel
crypto dynamic-map dynmap 1
set transform-set AES128
set isakmp-profile USERS
crypto map COMPANY_VPN 10 ipsec-isakmp
set peer *******
set transform-set 3DES-MD5
match address PA-VPN
qos pre-classify
crypto map COMPANY_VPN 50 ipsec-isakmp
set peer ******
set transform-set AES128
match address VPN
qos pre-classify
crypto map COMPANY_VPN 999 ipsec-isakmp dynamic dynmap
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
ip address 37.222.111.224 255.255.255.248
ip access-group INBOUND in
no ip redirects
no ip unreachables
no ip proxy-arp
ip verify unicast reverse-path
ip flow ingress
ip flow egress
ip nat outside
ip inspect FIREWALL out
ip virtual-reassembly in
duplex auto
speed auto
no cdp enable
no mop enabled
crypto map COMPANY_VPN
interface GigabitEthernet0/1
no ip address
ip flow ingress
duplex auto
speed auto
interface GigabitEthernet0/1.17
description LAN
encapsulation dot1Q 17
ip address 10.96.17.253 255.255.255.0
ip access-group OUTBOUND in
ip flow ingress
ip flow egress
ip nat inside
ip virtual-reassembly in
standby 0 ip 10.96.17.254
standby 0 priority 110
standby 0 preempt
standby 0 track 1 decrement 20
interface GigabitEthernet0/1.27
description VOICE
encapsulation dot1Q 27
ip address 192.168.17.254 255.255.255.0
ip access-group OUTBOUND in
ip helper-address 10.96.17.2
ip flow ingress
ip nat inside
ip virtual-reassembly in
h323-gateway voip bind srcaddr 192.168.17.254
ip local pool RAPOOL 10.96.20.50 10.96.20.150
ip forward-protocol nd
ip nat inside source route-map NAT-POOL interface GigabitEthernet0/0 overload
ip route 0.0.0.0 0.0.0.0 37.222.111.223
ip route 10.96.16.0 255.255.255.0 10.96.17.250
ip route 172.22.1.0 255.255.255.0 10.96.17.250
ip route 172.22.2.0 255.255.255.0 10.96.17.250
ip route 172.22.3.0 255.255.255.0 10.96.17.250
ip route 192.168.16.0 255.255.255.0 10.96.17.250
ip access-list extended DMZ
deny   ip any 10.0.0.0 0.255.255.255
deny   ip any 192.168.0.0 0.0.255.255
permit ip any any
ip access-list extended GUEST
deny   ip any 10.0.0.0 0.255.255.255
deny   ip any 192.168.0.0 0.0.255.255
permit ip any any
ip access-list extended INBOUND
deny   ip 80.25.124.0 0.0.0.255 any
deny   ip 10.0.0.0 0.255.255.255 any
deny   ip 172.16.0.0 0.15.255.255 any
permit udp host 173.239.147.114 any eq isakmp
permit esp host 173.239.147.114 any
deny   ip 192.168.0.0 0.0.255.255 any
permit udp any host 37.222.111.224 eq isakmp
permit udp any host 37.222.111.224 eq non500-isakmp
permit esp any host 37.222.111.224
ip access-list extended NAT
deny   ip 10.96.20.0 0.0.0.255 any
deny   ip any 10.96.20.0 0.0.0.255
permit ip 192.168.0.0 0.0.255.255 any
permit ip 10.0.0.0 0.255.255.255 any
ip access-list extended NONAT
permit ip any 192.168.0.0 0.0.255.255
permit ip any 10.0.0.0 0.255.255.255
ip access-list extended OUTBOUND
deny   udp any host 22.55.77.106 eq isakmp
deny   udp any host 22.55.77.106 eq non500-isakmp
deny   esp any host 22.55.77.106
permit ip any any
ip access-list extended PA-VPN
permit ip 10.0.0.0 0.255.255.255 10.96.18.0 0.0.0.255
permit ip 10.0.0.0 0.255.255.255 192.168.18.0 0.0.0.255
permit ip 192.168.0.0 0.0.255.255 10.96.18.0 0.0.0.255
permit ip 192.168.0.0 0.0.255.255 192.168.18.0 0.0.0.255
ip access-list extended SPLIT
permit ip 10.0.0.0 0.255.255.255 any
permit ip 192.168.0.0 0.0.255.255 any
ip access-list extended VPN
permit ip 10.96.16.0 0.0.0.255 10.0.0.0 0.255.255.255
permit ip 10.96.17.0 0.0.0.255 10.0.0.0 0.255.255.255
permit ip 10.96.18.0 0.0.0.255 10.0.0.0 0.255.255.255
permit ip 10.96.0.0 0.0.255.255 192.168.0.0 0.0.255.255
permit ip 10.96.0.0 0.0.255.255 10.0.0.0 0.255.255.255
permit ip 192.168.16.0 0.0.0.255 192.168.0.0 0.0.255.255
permit ip 192.168.17.0 0.0.0.255 192.168.0.0 0.0.255.255
permit ip 192.168.18.0 0.0.0.255 192.168.0.0 0.0.255.255
permit ip 192.168.17.0 0.0.0.255 10.0.0.0 0.255.255.255
permit ip 192.168.18.0 0.0.0.255 10.0.0.0 0.255.255.255
permit ip 172.22.0.0 0.0.255.255 10.0.0.0 0.255.255.255
permit ip 172.22.0.0 0.0.255.255 192.168.0.0 0.0.255.255
route-map NAT-POOL deny 5
match ip address NONAT
route-map NAT-POOL permit 10
match ip address NAT

How can i check the office web app server(wac client) is calling custom WOPI host?

I am getting an error when I testing my wopi host(which is the same as
example) with Office Web app server "Sorry, there was a problem and we can't open this document. If this happens again, try opening the document in Microsoft Word."
1-how can find the log files of this error?
2-how can i check the office web app server(wac client) is calling my WOPI host?
I am not sure about cumunication between owa to wopi host. I actually dont know how to implement checkfile and getfile functions to wopi host for waiting for call back from owa client.
Note:I am sure that office web app server is configured true. Because i test it with sharepoint 2013 and editing and viewing is working well.

Hi,
According to your post, my understanding is that
CheckFileInfo is how the WOPI application gets information about the file and the permissions a user has on the file. It should have a URL that looks like this:
HTTP://server/<...>/wopi*/files/<id>?access_token=<token>
While CheckFileInfo provides information about a file, GetFile returns the file itself. It should have a URL that looks like this:
HTTP://server/<...>/wopi*/files/<id>/contents?access_token=<token>
There is a great article for your reference.
http://blogs.msdn.com/b/officedevdocs/archive/2013/03/20/introducing-wopi.aspx
You can also refer to the following article which is about building an Office Web Apps(OWA) WOPI Host.
http://blogs.msdn.com/b/scicoria/archive/2013/07/22/building-an-office-web-apps-owa-wopi-host.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

I need to add a new computer and take off a old one but can't find the site or place to turn it off i can only have two computers but i got three please help let me know where to go to shut one off to put the new one on?

i need to add a new computer and take off a old one but can't find the site or place to turn it off i can only have two computers but i got three please help let me know where to go to shut one off to put the new one on?

Hello,
the way is written there Activation & deactivation help >>> (see there only to understand the procedure) Common activation problems >>> "Activation limit reached for [product]. This serial number has already been activated on 2 computers." "Maximum activations exceeded."
>>> How to deactivate or sign out >>> A single license for Adobe software lets you install the applications on two computers—for example, at home and at the office. However, you can use the software on only one computer at any given time.
If you want to install the software on a third computer, deactivate the software on the computer on which you will no longer use the software. Then, activate the software on the new computer.
Hans-Günter

In DW can I put a slide show in as its background. Then have the web site over it?

In DW can I put a slide show in as its background. Then have the web site over it?

Dreamweaver has no built-in provision for this. But you will find jQuery plugins that can do it.
Supersized - Full Screen Background Slideshow jQuery Plugin
Nancy O.

Unable to connect Firefox can't establish a connection to the server at 'URL of the site' why does this appear in all browser??

I have used these sites
-www.facebook.com
-www.dubbedonline.tv/ and some others for a long time but few weeks ago i couldn't access them anymore and this appeared :
Unable to connect
Firefox can't establish a connection to the server at www.facebook.com.
The site could be temporarily unavailable or too busy. Try again in a few moments.
If you are unable to load any pages, check your computer's network connection.
If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
i have also tried many ways to access them but none of the solution worked, one of them was checking troubleshooting problems and it detected that the remote device won't accept the connection, so, how can i fix this?

You can check the connection settings.
*Tools > Options > Advanced > Network : Connection > Settings
*https://support.mozilla.org/kb/Options+window+-+Advanced+panel
If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
See "Firefox connection settings":
*https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

If you already have a web host can you upload your site to BC so client can edit in browser

If you already have a web host can you upload your site to BC so a client can edit in browser?

If you already have a web host can you upload your site to BC so a client can edit in browser?

Can't put my site on hosting server

Similar Messages

Maybe you are looking for