Can't reach websites on same server for short period

Hi!
I've got something strange. If i look at websites that are on the same server i can't seem to reach them anymore after a while. And this takes a short period and then i can reach them again.
It's the same with Safari or Firefox, and when i try i trough windows (paralells) it does work! So it seems to be a Macosx problem i'm heaving.
Anyone have an idea?
Thanks!

I'd try alternate DNS addresses, such as those at OpenDNS, to see if that solves the problem. Even though Windows in Parallels can see the sites, the problem might be DNS. It seems that sometimes DNS issues are caused by communication problems somewhere between the system software and the DNS servers.
The fact that all the sites you can't access are on the same server makes DNS sound like a likely culprit.

Similar Messages

How I can configure 2 EP 7.0 server for SSO with ECC 6.0?

Hi,
How I can configure 2 EP 7.0 server for SSO by using SAP Logon ticket with same ECC 6.0 back end?
Developement EP 7.0 SP14 is already configure with ECC 6.0 back end now I want to configure my local EP 7.0 SP9 (Sneak Preview) server with same ECC 6.0 Development.
How I can acheive this?
I really appreciate if some one guide me.
Thanks.
Ashish.

Hi,
You have to follow the SSO steps.
1.Create RFC Destination in SM59
2.Create RFC Destination in Visual admin
3.Export verify.der certificate from portal
4.Import verify.der certificate to R/3
5.Create system alias
6.Export R/3 certificate from R/3
7.Import R/3 certificate to portal
8.Maintain the SSO parameters in RZ10
Please check the below link also.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/4d/dd9b9ce80311d5995500508b6b8b11/frameset.htm
Regards,
Bala.

IPhoto 11 (9.2.1) can't use iCloud Mail smtp server for email.

iPhoto 11 (9.2.1) can't use iCloud Mail smtp server for email. "The email server didn't recognise username/password combination". Both appear correct in preferences/accounts. Mail sends and receives messages perfectly.
(This problem also occurs when trying to send from Thunderbird, however both iPhoto and Thunderbird can send perfectly well using the Gmail server).

Hi there
I should explain that I have 5 days experience of the iMac but have had a working iCloud account with my iPad for several months. I don't think this is an iCloud issue as such. My thought is that this is something to do with the Mail application itself and its relationship to my Apple ID etc. (Perhaps when the iMac first configured itself?)
I have deleted and manually reset both Mail and iPhone account settings for iCloud using the Apple recommended settings and I have tentatively checked that the username/password combination is as expected in Keychain but I'm too much of an Apple novice to go any further with that.
On a PC I think I would try reinstalling the Mail programme but I don't see that as an option.

Why is my cursor taking holidays and choosing to not respond to my mouse or mice as I have more than one that I can use and it refuses to respond for a period of time

Why is my cursor taking holidays and choosing to not respond to my mouse or mice as I have more than one that I can use and it refuses to respond for a period of time

Hi
Yes you can delete the expired certificate which are showing as it is not functional anymore and they remain as stale entries
You can use below command
Remove-ExchangeCertificate -Thumbprint "specify the value "
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Screen freezes randomly for short periods of time [Solved]

I'm not sure when this started to happen, but my screen will freeze (not refresh) randomly for short periods of time (about 5 seconds). The mouse cursor still active and anything I click on will eventually catch up once the screen refreshes.
I'm assuming this is an Xorg issue, or perhaps and Nvidia issue, but here are some details:
KDE 4.4
Kernel 2.6.32-ARCH 64
Nvidia 195.36.15
And here is my Xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Tue Oct 20 21:25:04 PDT 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
InputDevice "SynapticsTouchpad" "SendCoreEvents"
EndSection
Section "Files"
EndSection
Section "Module"
Load "glx"
Load "synaptics"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "SynapticsTouchpad"
Driver "synaptics"
Option "AlwaysCore" "true"
Option "/dev/input/mice"
Option "/dev/psaux"
Option "VerticalEdgeScroll" "True"
Option "HorizontalEdgeScroll" "True"
Option "CornerCoasting" "true"
Option "TapButton1" "1"
Option "TapButton2" "2"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "NoLogo" "True"
Option "RenderAccel" "True"
Option "TripleBuffer" "True"
Option "BackingStore" "True"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Needless to say this is very annoying/embarrassing when I try and show people stuff, so any help would be greatly appreciated!
Last edited by fini_fly (2010-05-21 13:47:20)

What you can try is to add:
option "UseEvents" "false"
(also try "true" and see if it works for you)
to your xorg.conf under the device section. Play with both false and true settings, UseEvents is somewhat related to the short freezes and the nvidia guys mentioned they disabled this feature a few driver releases ago (as far as i know from researching their forums). Otherwise we probably have to wait for a new driver series.
Another tweak would be to check if you use MSI for your nvidia card:
cat /proc/interrupts:
22: 0 4 1106 297835 IO-APIC-fasteoi ohci_hcd:usb3
23: 1 17 3275 890447 IO-APIC-fasteoi hda_intel
27: 2 13 1035 342106 PCI-MSI-edge ahci
28: 5 337 26356 7568321 PCI-MSI-edge eth0
29: 6 92 10219 1998835 PCI-MSI-edge nvidia
NMI: 0 0 0 0 Non-maskable interrupts
add this to /etc/modprobe.d/options.conf: (does not work with all nvidia cards but i can confirm it works with the 200 series)
options nvidia NVreg_EnableMSI=1
While using MSI slightly improves performance some people reported it also shortens the occasional freezes.
As said in the post above this is only for nvidia and it may or may not help for some gpu's.
Best regards

Can i make use of same wallet for both Oracle Weblogic Server and OHS

We have configured an setup where Oracle HTTP Server 11g is configured as proxy server which will loadbalance the request to the cluster managed server.
We have created the wallet and configured SSL for Oracle Weblogic server. Now we want to configure SSL for OHS (Oracle HTTP Server ) .
Can we make use of same wallet.
For creating wallet i have used keytool utility and for certificate Microsoft CA.

10/04/15 11:47:00 Start process
/apps/weblogic/Oracle_11g/ohs/bin/apachectl startssl: execing httpd
Syntax error on line 70 of /apps/weblogic/Oracle_11g/instances/instance1/config/OHS/ohs1/ssl.conf:
Invalid command 'SSLCertificateFile', perhaps misspelled or defined by a module not included in the server configuration
When i am using separate wallet and that too using oracle wallet manager it is working fine .. But with keytool utility it is not working...
When used keytool it gave below error
[2010-04-13T11:17:22.4873+04:00] [OHS] [ERROR:32] [OHS-2052] [mod_ssl.c] [host_id: dxb01-sol-intellectapp] [host_addr: 10.240
.245.41] [pid: 22731] [tid: 1] [user: root] [VirtualHost: dxb01-sol-intellectapp:4443] server dxb01-sol-intellectapp:4443 ha
s an invalid wallet: file:/export/home/weblogic/ohsssl :: 28759
[2010-04-13T11:17:22.4874+04:00] [OHS] [ERROR:32] [OHS-2171] [mod_ssl.c] [host_id: dxb01-sol-intellectapp] [host_addr: 10.240
.245.41] [pid: 22731] [tid: 1] [user: root] [VirtualHost: dxb01-sol-intellectapp:4443] NZ Library Error: Failed to open the
wallet [Hint: incorrect path, incorrect password, bad wallet, ...]
As per hint , the path was correct , wallet was perferct , no where i was passing the password. So thought of passing password for keytool and used SSLWalletPassword key , but later found that it is depricated ...
That means we have to use oracle wallet manager where we can enable auto login ...
Please Advice if i am wrong..

Can i use same Server for server side and client??

Hi,
i m developing webservices in java and using two different server for server side and client.
e.g. i m using one tomcat server on a machine to run webservice and again using one more tomcat server on client side at different machine.
and hence it need two tomcat server.
But i want only one server to run webservice and client.
So please help me out...
Thanks

Hi,
It is always recommended to maintain different servers
REgards,
Ravi.

Can't Login to Embedded Web Server for HP Officejet Pro 8600 N911g

I have a HP Officejet Pro 8600 N911g that I am trying to access in order to update the adress book for the scanner but in order to do that I must login. I have never set up a user name or password for it. Is there a default username and password?

Hello @jessescopely,
Welcome back to the HP forums.
I understand that when you try to access the EWS (Embedded Web Server) for your Officejet pro 8600, you are prompted for a username and password.
Unfortunately there is no default username or password.
On rare occasions this can be fixed by restoring the network defaults.
Go into the Setup menu.
Select the Network sub menu.
Choose Restore Network Defaults.
I have also sent you via private message the steps to reset your printer back to factory defaults.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
If neither of those clear the password, please call our technical support at 800-474-6836.
If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Do you need a separate telephone number for an IPad or can it link to the same number for the IPhone?

Do you need a separate number for an IPad or can it link to the same number you use for your IPhone?

If it is an iPad with WiFi + Cellular, it has a mobile number attached to it. However, that number has no practical use for the end user as you can't use it to make calls or send texts. It's mostly a way of connecting the device to the cellular network. Additionally, cellular numbers are only attached to one device at a time.
If what you're really asking is can you share a plan with your cell phone, well that depends on your carrier. Give them a call.
Best of luck.

Can i set a node manager serve for 2 domain on one machin??

My question is simple.
I installed webcenter suite and soa suite in a machine using difference linux user and difference middleware home.
and I want to set a node manager server for two domains (soa_domain and webcenter_domain).
Is is possible?
When I tried to register domain list in node manager domain list using nmEnroll() of wlst, it failed.
please check following logs in 7101 is admin server port of soa domain and I ran node manager on webcenter domain.
Thanks in advance.
BmW.
~~~~~~~~~~~~~~~~~~
wls:/offline> connect()
Please enter your username :weblogic
Please enter your password :
Please enter your server URL [t3://localhost:7001] :t3://localhost:7101
Connecting to t3://localhost:7101 with userid weblogic ...
Successfully connected to Admin Server 'AdminServer' that belongs to domain 'soa_domain'.
Warning: An insecure protocol was used to connect to the
server. To ensure on-the-wire security, the SSL port or
Admin port should be used instead.
wls:/soa_domain/serverConfig> wls:/soa_domain/serverConfig> wls:/soa_domain/serverConfig> wls:/soa_domain/serverConfig> nmEnroll('/u02/app/soa11g/middleware/user_projects/domains/soa_domain', '/u02/app/wc11g/middleware/wlserver_10.3/common/nodemanager');
Enrolling this machine with the domain directory at /u02/app/soa11g/middleware/user_projects/domains/soa_domain ...
Traceback (innermost last):
File "<console>", line 1, in ?
File "<iostream>", line 1447, in nmEnroll
File "<iostream>", line 1848, in raiseWLSTException
WLSTException: Error occured while performing nmEnroll : Problem enrolling the machine. : /u02/app/soa11g/middleware/user_projects/domains/soa_domain/config/nodemanager/nm_password.properties (Permission denied)
Use dumpStack() to view the full stacktrace
wls:/soa_domain/serverConfig> exit();

you might be victim of the "node manager starts WL Server with same Unix user id that was used to start Node Manager itself" problem
see here http://forums.oracle.com/forums/thread.jspa?threadID=2184607&tstart=89
I have been looking everywhere for a simple way to tell Node Manager to use a different Unix UID,
anybody any clue?
here http://download.oracle.com/docs/cd/E12840_01/wls/docs103/nodemgr/overview.html the Node Manager doc page

Can't download Oracle 9i Database Server for SUN Solaris 32 bit platform

I was not able to download Oracle 9.2.0 DB Server for Sun Solaris 32 bit platform from OTN site this morning. Could someone please take a look at it?
Thanks,
Wen Davis

At this time, Oracle is offering only the 64- bit and we do not
have additional information if in the future 32-bit will be
offered.
Best Regards,
OTN Team

Can we run KSU5 - Assessment Cycle execute for previous periods

Dear Gurus,
Can we run KSU5 for previous periods. Means I have not ran from April 2008 onwards. Can I run right for all periods. Any inconsistencies arises for running the KSU5.
Please guide us.
Regards
Srinivas

Hi Srinivas,
You can run the Cycle for previous periods also using KISR transaction code. Here, you can select the processing period (previous period) and posting period (current period) and the Cycle and the Segments.
Note: If you want the postings to happen in the same corresponding processing periods, you need to check those periods to be open and consider other inconsistencies also.
Pls revert back for further assistance...
Srikanth Munnaluri

Can't Run AFAB - Posting run requested for future period

Hi,
While taking depreciation run for company code in AFAB system is generating the error message "Posting run for future period requested (check entry)" SAP error AA697
Diagnosis
There was a check of your entries in the company code and posting period fields for the current system date. The result of this check is that you requested a posting run for company code xxxx for a future fiscal period.
Please help me, cause I must close the period.
Thanks

Hi
Check Table TABA, whats your last posted period for depreciation
If you are executing depreciation for last period + 1, then this error is not justified
If you are doing it for last period + 2, then its justified
Br, Ajay M

ITunes "can't connect to the CDDB server" for tracks on a CD (but can once I've imported them)

When I insert a CD into my computer, iTunes cannot get the track names before importing, I get the "Unable to connect to the CDDB server. The network cannot be reached." Bizarrely, however, once I import the tracks onto my PC and ask iTunes to 'Get Track Names' for the files in my library, it can do it fine. I am also able to access the iTunes Store without trouble.
Also, in what I'm sure is related, the Apple Software Update program does not work anymore ("The server could not be found"), so I've to manually download new versions of iTunes from the Apple website.
I've had this problem for months, and I've tried pretty much every solution I'd seen posted for similar problems (reinstalling iTunes, disabling my virus protection, updating Gracenote, ensuring the proxy settings are automatic) with no success.

I've just tried putting my computer into Safe Mode (with netwroking) to check if there was some other program stopping it from working properly, but iTunes still acted the same. It's more of a minor inconvienience than a problem, seeing as I can just get track names after importing and update manually, but it's still pretty baffling.

Is there a way that I can get Automator to start a server for me after restart of Mac

Hello!
I have a serverprogram from an external company that doesnt start after a restart of the mac that I run that server on. It starts the program but it doesnt start up the server of the program. All settings are right and I have consulted others with same config. After a restart the server turns up in the statusbar but as turned off. So I can go to the statusbar, click on the symbol and choose "start server".
As I cant get the server to start up automaticly I was wondering if I can get the automator to start it up for me after a restart of the mac?
Ifso how?
/ Mikke
Macmini i5 Mavericks

I found out how to make a flow and how to make a program of that. BUT it wont execute after restart. Anyone?

Can't reach websites on same server for short period

Similar Messages

Maybe you are looking for